linux_dsm_epyc7002/drivers/mfd/wm8350-regmap.c
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

336 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* wm8350-regmap.c -- Wolfson Microelectronics WM8350 register map
*
* This file splits out the tables describing the defaults and access
* status of the WM8350 registers since they are rather large.
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
*/
#include <linux/mfd/wm8350/core.h>
/*
* Access masks.
*/
static const struct wm8350_reg_access {
u16 readable; /* Mask of readable bits */
u16 writable; /* Mask of writable bits */
u16 vol; /* Mask of volatile bits */
} wm8350_reg_io_map[] = {
/* read write volatile */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R0 - Reset/ID */
{ 0x7CFF, 0x0C00, 0x0000 }, /* R1 - ID */
{ 0x007F, 0x0000, 0x0000 }, /* R2 - ROM Mask ID */
{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */
{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */
{ 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */
{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */
{ 0x0000, 0x0000, 0x0000 }, /* R7 */
{ 0xE537, 0xE537, 0xFFFF }, /* R8 - Power mgmt (1) */
{ 0x0FF3, 0x0FF3, 0xFFFF }, /* R9 - Power mgmt (2) */
{ 0x008F, 0x008F, 0xFFFF }, /* R10 - Power mgmt (3) */
{ 0x6D3C, 0x6D3C, 0xFFFF }, /* R11 - Power mgmt (4) */
{ 0x1F8F, 0x1F8F, 0xFFFF }, /* R12 - Power mgmt (5) */
{ 0x8F3F, 0x8F3F, 0xFFFF }, /* R13 - Power mgmt (6) */
{ 0x0003, 0x0003, 0xFFFF }, /* R14 - Power mgmt (7) */
{ 0x0000, 0x0000, 0x0000 }, /* R15 */
{ 0x7F7F, 0x7F7F, 0xFFFF }, /* R16 - RTC Seconds/Minutes */
{ 0x073F, 0x073F, 0xFFFF }, /* R17 - RTC Hours/Day */
{ 0x1F3F, 0x1F3F, 0xFFFF }, /* R18 - RTC Date/Month */
{ 0x3FFF, 0x00FF, 0xFFFF }, /* R19 - RTC Year */
{ 0x7F7F, 0x7F7F, 0x0000 }, /* R20 - Alarm Seconds/Minutes */
{ 0x0F3F, 0x0F3F, 0x0000 }, /* R21 - Alarm Hours/Day */
{ 0x1F3F, 0x1F3F, 0x0000 }, /* R22 - Alarm Date/Month */
{ 0xEF7F, 0xEA7F, 0xFFFF }, /* R23 - RTC Time Control */
{ 0x3BFF, 0x0000, 0xFFFF }, /* R24 - System Interrupts */
{ 0xFEE7, 0x0000, 0xFFFF }, /* R25 - Interrupt Status 1 */
{ 0x35FF, 0x0000, 0xFFFF }, /* R26 - Interrupt Status 2 */
{ 0x0F3F, 0x0000, 0xFFFF }, /* R27 - Power Up Interrupt Status */
{ 0x0F3F, 0x0000, 0xFFFF }, /* R28 - Under Voltage Interrupt status */
{ 0x8000, 0x0000, 0xFFFF }, /* R29 - Over Current Interrupt status */
{ 0x1FFF, 0x0000, 0xFFFF }, /* R30 - GPIO Interrupt Status */
{ 0xEF7F, 0x0000, 0xFFFF }, /* R31 - Comparator Interrupt Status */
{ 0x3FFF, 0x3FFF, 0x0000 }, /* R32 - System Interrupts Mask */
{ 0xFEE7, 0xFEE7, 0x0000 }, /* R33 - Interrupt Status 1 Mask */
{ 0xF5FF, 0xF5FF, 0x0000 }, /* R34 - Interrupt Status 2 Mask */
{ 0x0F3F, 0x0F3F, 0x0000 }, /* R35 - Power Up Interrupt Status Mask */
{ 0x0F3F, 0x0F3F, 0x0000 }, /* R36 - Under Voltage Int status Mask */
{ 0x8000, 0x8000, 0x0000 }, /* R37 - Over Current Int status Mask */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R38 - GPIO Interrupt Status Mask */
{ 0xEF7F, 0xEF7F, 0x0000 }, /* R39 - Comparator IntStatus Mask */
{ 0xC9F7, 0xC9F7, 0xFFFF }, /* R40 - Clock Control 1 */
{ 0x8001, 0x8001, 0x0000 }, /* R41 - Clock Control 2 */
{ 0xFFF7, 0xFFF7, 0xFFFF }, /* R42 - FLL Control 1 */
{ 0xFBFF, 0xFBFF, 0x0000 }, /* R43 - FLL Control 2 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R44 - FLL Control 3 */
{ 0x0033, 0x0033, 0x0000 }, /* R45 - FLL Control 4 */
{ 0x0000, 0x0000, 0x0000 }, /* R46 */
{ 0x0000, 0x0000, 0x0000 }, /* R47 */
{ 0x3033, 0x3033, 0x0000 }, /* R48 - DAC Control */
{ 0x0000, 0x0000, 0x0000 }, /* R49 */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R50 - DAC Digital Volume L */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R51 - DAC Digital Volume R */
{ 0x0000, 0x0000, 0x0000 }, /* R52 */
{ 0x0FFF, 0x0FFF, 0xFFFF }, /* R53 - DAC LR Rate */
{ 0x0017, 0x0017, 0x0000 }, /* R54 - DAC Clock Control */
{ 0x0000, 0x0000, 0x0000 }, /* R55 */
{ 0x0000, 0x0000, 0x0000 }, /* R56 */
{ 0x0000, 0x0000, 0x0000 }, /* R57 */
{ 0x4000, 0x4000, 0x0000 }, /* R58 - DAC Mute */
{ 0x7000, 0x7000, 0x0000 }, /* R59 - DAC Mute Volume */
{ 0x3C00, 0x3C00, 0x0000 }, /* R60 - DAC Side */
{ 0x0000, 0x0000, 0x0000 }, /* R61 */
{ 0x0000, 0x0000, 0x0000 }, /* R62 */
{ 0x0000, 0x0000, 0x0000 }, /* R63 */
{ 0x8303, 0x8303, 0xFFFF }, /* R64 - ADC Control */
{ 0x0000, 0x0000, 0x0000 }, /* R65 */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R66 - ADC Digital Volume L */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R67 - ADC Digital Volume R */
{ 0x0FFF, 0x0FFF, 0x0000 }, /* R68 - ADC Divider */
{ 0x0000, 0x0000, 0x0000 }, /* R69 */
{ 0x0FFF, 0x0FFF, 0xFFFF }, /* R70 - ADC LR Rate */
{ 0x0000, 0x0000, 0x0000 }, /* R71 */
{ 0x0707, 0x0707, 0xFFFF }, /* R72 - Input Control */
{ 0xC0C0, 0xC0C0, 0xFFFF }, /* R73 - IN3 Input Control */
{ 0xC09F, 0xC09F, 0xFFFF }, /* R74 - Mic Bias Control */
{ 0x0000, 0x0000, 0x0000 }, /* R75 */
{ 0x0F15, 0x0F15, 0xFFFF }, /* R76 - Output Control */
{ 0xC000, 0xC000, 0xFFFF }, /* R77 - Jack Detect */
{ 0x03FF, 0x03FF, 0x0000 }, /* R78 - Anti Pop Control */
{ 0x0000, 0x0000, 0x0000 }, /* R79 */
{ 0xE1FC, 0xE1FC, 0x8000 }, /* R80 - Left Input Volume */
{ 0xE1FC, 0xE1FC, 0x8000 }, /* R81 - Right Input Volume */
{ 0x0000, 0x0000, 0x0000 }, /* R82 */
{ 0x0000, 0x0000, 0x0000 }, /* R83 */
{ 0x0000, 0x0000, 0x0000 }, /* R84 */
{ 0x0000, 0x0000, 0x0000 }, /* R85 */
{ 0x0000, 0x0000, 0x0000 }, /* R86 */
{ 0x0000, 0x0000, 0x0000 }, /* R87 */
{ 0x9807, 0x9807, 0xFFFF }, /* R88 - Left Mixer Control */
{ 0x980B, 0x980B, 0xFFFF }, /* R89 - Right Mixer Control */
{ 0x0000, 0x0000, 0x0000 }, /* R90 */
{ 0x0000, 0x0000, 0x0000 }, /* R91 */
{ 0x8909, 0x8909, 0xFFFF }, /* R92 - OUT3 Mixer Control */
{ 0x9E07, 0x9E07, 0xFFFF }, /* R93 - OUT4 Mixer Control */
{ 0x0000, 0x0000, 0x0000 }, /* R94 */
{ 0x0000, 0x0000, 0x0000 }, /* R95 */
{ 0x0EEE, 0x0EEE, 0x0000 }, /* R96 - Output Left Mixer Volume */
{ 0xE0EE, 0xE0EE, 0x0000 }, /* R97 - Output Right Mixer Volume */
{ 0x0E0F, 0x0E0F, 0x0000 }, /* R98 - Input Mixer Volume L */
{ 0xE0E1, 0xE0E1, 0x0000 }, /* R99 - Input Mixer Volume R */
{ 0x800E, 0x800E, 0x0000 }, /* R100 - Input Mixer Volume */
{ 0x0000, 0x0000, 0x0000 }, /* R101 */
{ 0x0000, 0x0000, 0x0000 }, /* R102 */
{ 0x0000, 0x0000, 0x0000 }, /* R103 */
{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R104 - LOUT1 Volume */
{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R105 - ROUT1 Volume */
{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R106 - LOUT2 Volume */
{ 0xE7FC, 0xE7FC, 0xFFFF }, /* R107 - ROUT2 Volume */
{ 0x0000, 0x0000, 0x0000 }, /* R108 */
{ 0x0000, 0x0000, 0x0000 }, /* R109 */
{ 0x0000, 0x0000, 0x0000 }, /* R110 */
{ 0x80E0, 0x80E0, 0xFFFF }, /* R111 - BEEP Volume */
{ 0xBF00, 0xBF00, 0x0000 }, /* R112 - AI Formating */
{ 0x00F1, 0x00F1, 0x0000 }, /* R113 - ADC DAC COMP */
{ 0x00F8, 0x00F8, 0x0000 }, /* R114 - AI ADC Control */
{ 0x40FB, 0x40FB, 0x0000 }, /* R115 - AI DAC Control */
{ 0x7C30, 0x7C30, 0x0000 }, /* R116 - AIF Test */
{ 0x0000, 0x0000, 0x0000 }, /* R117 */
{ 0x0000, 0x0000, 0x0000 }, /* R118 */
{ 0x0000, 0x0000, 0x0000 }, /* R119 */
{ 0x0000, 0x0000, 0x0000 }, /* R120 */
{ 0x0000, 0x0000, 0x0000 }, /* R121 */
{ 0x0000, 0x0000, 0x0000 }, /* R122 */
{ 0x0000, 0x0000, 0x0000 }, /* R123 */
{ 0x0000, 0x0000, 0x0000 }, /* R124 */
{ 0x0000, 0x0000, 0x0000 }, /* R125 */
{ 0x0000, 0x0000, 0x0000 }, /* R126 */
{ 0x0000, 0x0000, 0x0000 }, /* R127 */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R128 - GPIO Debounce */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R129 - GPIO Pin pull up Control */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R130 - GPIO Pull down Control */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R131 - GPIO Interrupt Mode */
{ 0x0000, 0x0000, 0x0000 }, /* R132 */
{ 0x00C0, 0x00C0, 0x0000 }, /* R133 - GPIO Control */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R134 - GPIO Configuration (i/o) */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R135 - GPIO Pin Polarity / Type */
{ 0x0000, 0x0000, 0x0000 }, /* R136 */
{ 0x0000, 0x0000, 0x0000 }, /* R137 */
{ 0x0000, 0x0000, 0x0000 }, /* R138 */
{ 0x0000, 0x0000, 0x0000 }, /* R139 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R140 - GPIO Function Select 1 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R141 - GPIO Function Select 2 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R142 - GPIO Function Select 3 */
{ 0x000F, 0x000F, 0x0000 }, /* R143 - GPIO Function Select 4 */
{ 0xF0FF, 0xF0FF, 0xA000 }, /* R144 - Digitiser Control (1) */
{ 0x3707, 0x3707, 0x0000 }, /* R145 - Digitiser Control (2) */
{ 0x0000, 0x0000, 0x0000 }, /* R146 */
{ 0x0000, 0x0000, 0x0000 }, /* R147 */
{ 0x0000, 0x0000, 0x0000 }, /* R148 */
{ 0x0000, 0x0000, 0x0000 }, /* R149 */
{ 0x0000, 0x0000, 0x0000 }, /* R150 */
{ 0x0000, 0x0000, 0x0000 }, /* R151 */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R152 - AUX1 Readback */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R153 - AUX2 Readback */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R154 - AUX3 Readback */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R155 - AUX4 Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R156 - USB Voltage Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R157 - LINE Voltage Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R158 - BATT Voltage Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R159 - Chip Temp Readback */
{ 0x0000, 0x0000, 0x0000 }, /* R160 */
{ 0x0000, 0x0000, 0x0000 }, /* R161 */
{ 0x0000, 0x0000, 0x0000 }, /* R162 */
{ 0x000F, 0x000F, 0x0000 }, /* R163 - Generic Comparator Control */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R164 - Generic comparator 1 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R165 - Generic comparator 2 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R166 - Generic comparator 3 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R167 - Generic comparator 4 */
{ 0xBFFF, 0xBFFF, 0x8000 }, /* R168 - Battery Charger Control 1 */
{ 0xFFFF, 0x4FFF, 0xB000 }, /* R169 - Battery Charger Control 2 */
{ 0x007F, 0x007F, 0x0000 }, /* R170 - Battery Charger Control 3 */
{ 0x0000, 0x0000, 0x0000 }, /* R171 */
{ 0x903F, 0x903F, 0xFFFF }, /* R172 - Current Sink Driver A */
{ 0xE333, 0xE333, 0xFFFF }, /* R173 - CSA Flash control */
{ 0x903F, 0x903F, 0xFFFF }, /* R174 - Current Sink Driver B */
{ 0xE333, 0xE333, 0xFFFF }, /* R175 - CSB Flash control */
{ 0x8F3F, 0x8F3F, 0xFFFF }, /* R176 - DCDC/LDO requested */
{ 0x332D, 0x332D, 0x0000 }, /* R177 - DCDC Active options */
{ 0x002D, 0x002D, 0x0000 }, /* R178 - DCDC Sleep options */
{ 0x5177, 0x5177, 0x8000 }, /* R179 - Power-check comparator */
{ 0x047F, 0x047F, 0x0000 }, /* R180 - DCDC1 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R181 - DCDC1 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R182 - DCDC1 Low Power */
{ 0x535B, 0x535B, 0x0000 }, /* R183 - DCDC2 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R184 - DCDC2 Timeouts */
{ 0x0000, 0x0000, 0x0000 }, /* R185 */
{ 0x047F, 0x047F, 0x0000 }, /* R186 - DCDC3 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R187 - DCDC3 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R188 - DCDC3 Low Power */
{ 0x047F, 0x047F, 0x0000 }, /* R189 - DCDC4 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R190 - DCDC4 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R191 - DCDC4 Low Power */
{ 0x535B, 0x535B, 0x0000 }, /* R192 - DCDC5 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R193 - DCDC5 Timeouts */
{ 0x0000, 0x0000, 0x0000 }, /* R194 */
{ 0x047F, 0x047F, 0x0000 }, /* R195 - DCDC6 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R196 - DCDC6 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R197 - DCDC6 Low Power */
{ 0x0000, 0x0000, 0x0000 }, /* R198 */
{ 0xFFD3, 0xFFD3, 0x0000 }, /* R199 - Limit Switch Control */
{ 0x441F, 0x441F, 0x0000 }, /* R200 - LDO1 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R201 - LDO1 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R202 - LDO1 Low Power */
{ 0x441F, 0x441F, 0x0000 }, /* R203 - LDO2 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R204 - LDO2 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R205 - LDO2 Low Power */
{ 0x441F, 0x441F, 0x0000 }, /* R206 - LDO3 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R207 - LDO3 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R208 - LDO3 Low Power */
{ 0x441F, 0x441F, 0x0000 }, /* R209 - LDO4 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R210 - LDO4 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R211 - LDO4 Low Power */
{ 0x0000, 0x0000, 0x0000 }, /* R212 */
{ 0x0000, 0x0000, 0x0000 }, /* R213 */
{ 0x0000, 0x0000, 0x0000 }, /* R214 */
{ 0x8F3F, 0x8F3F, 0x0000 }, /* R215 - VCC_FAULT Masks */
{ 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */
{ 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */
{ 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R219 - Security */
{ 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */
{ 0x0000, 0x0000, 0x0000 }, /* R221 */
{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */
{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */
{ 0x0000, 0x0000, 0x0000 }, /* R224 */
{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
{ 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
{ 0x34FE, 0x0000, 0xFFFF }, /* R227 */
{ 0x0000, 0x0000, 0x0000 }, /* R228 */
{ 0x0000, 0x0000, 0x0000 }, /* R229 */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R230 - GPIO Pin Status */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R231 */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R232 */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R233 */
{ 0x0000, 0x0000, 0x0000 }, /* R234 */
{ 0x0000, 0x0000, 0x0000 }, /* R235 */
{ 0x0000, 0x0000, 0x0000 }, /* R236 */
{ 0x0000, 0x0000, 0x0000 }, /* R237 */
{ 0x0000, 0x0000, 0x0000 }, /* R238 */
{ 0x0000, 0x0000, 0x0000 }, /* R239 */
{ 0x0000, 0x0000, 0x0000 }, /* R240 */
{ 0x0000, 0x0000, 0x0000 }, /* R241 */
{ 0x0000, 0x0000, 0x0000 }, /* R242 */
{ 0x0000, 0x0000, 0x0000 }, /* R243 */
{ 0x0000, 0x0000, 0x0000 }, /* R244 */
{ 0x0000, 0x0000, 0x0000 }, /* R245 */
{ 0x0000, 0x0000, 0x0000 }, /* R246 */
{ 0x0000, 0x0000, 0x0000 }, /* R247 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R248 */
{ 0x0000, 0x0000, 0x0000 }, /* R249 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R250 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R251 */
{ 0x0000, 0x0000, 0x0000 }, /* R252 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R253 */
{ 0x0000, 0x0000, 0x0000 }, /* R254 */
{ 0x0000, 0x0000, 0x0000 }, /* R255 */
};
static bool wm8350_readable(struct device *dev, unsigned int reg)
{
return wm8350_reg_io_map[reg].readable;
}
static bool wm8350_writeable(struct device *dev, unsigned int reg)
{
struct wm8350 *wm8350 = dev_get_drvdata(dev);
if (!wm8350->unlocked) {
if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
return false;
}
return wm8350_reg_io_map[reg].writable;
}
static bool wm8350_volatile(struct device *dev, unsigned int reg)
{
return wm8350_reg_io_map[reg].vol;
}
static bool wm8350_precious(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8350_SYSTEM_INTERRUPTS:
case WM8350_INT_STATUS_1:
case WM8350_INT_STATUS_2:
case WM8350_POWER_UP_INT_STATUS:
case WM8350_UNDER_VOLTAGE_INT_STATUS:
case WM8350_OVER_CURRENT_INT_STATUS:
case WM8350_GPIO_INT_STATUS:
case WM8350_COMPARATOR_INT_STATUS:
return true;
default:
return false;
}
}
const struct regmap_config wm8350_regmap = {
.reg_bits = 8,
.val_bits = 16,
.cache_type = REGCACHE_RBTREE,
.max_register = WM8350_MAX_REGISTER,
.readable_reg = wm8350_readable,
.writeable_reg = wm8350_writeable,
.volatile_reg = wm8350_volatile,
.precious_reg = wm8350_precious,
};