AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 07:09:15 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
742ae1f945
linux_dsm_epyc7002/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
Geert Uytterhoeven 2e7c416cba ARM: dts: imx: Use generic uart-has-rtscts DT property 
As of commit 1006ed7e1b ("serial: imx: Use generic uart-has-rtscts
DT property"), the Freescale IMX UART driver recognizes the generic
"uart-has-rtscts" DT property, deprecating the vendor-specific
"fsl,uart-has-rtscts" DT property. Hence replace the latter by the
former in all DTS files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 14:48:05 +08:00

297 lines
6.5 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx27.dtsi"
/ {
model = "Eukrea CPUIMX27";
compatible = "eukrea,cpuimx27", "fsl,imx27";
memory {
reg = <0xa0000000 0x04000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-bus";
clk14745600: clock@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
reg = <0>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};
&owire {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_owire>;
status = "okay";
};
&sdhci2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhc2>;
bus-width = <4>;
non-removable;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
uart-has-rtscts;
status = "okay";
};
&usbh2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh2>;
dr_mode = "host";
phy_type = "ulpi";
disable-over-current;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
phy_type = "ulpi";
disable-over-current;
status = "okay";
};
&weim {
status = "okay";
nor: nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0 0x00000000 0x04000000>;
bank-width = <2>;
linux,mtd-name = "physmap-flash.0";
fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
};
uart8250@3,200000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_1>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x200000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
uart8250@3,400000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_2>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x400000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
uart8250@3,800000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_3>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x800000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
uart8250@3,1000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_4>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x1000000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
};
&iomuxc {
imx27-eukrea-cpuimx27 {
pinctrl_fec: fecgrp {
fsl,pins = <
MX27_PAD_SD3_CMD__FEC_TXD0 0x0
MX27_PAD_SD3_CLK__FEC_TXD1 0x0
MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
MX27_PAD_ATA_DATA7__FEC_MDC 0x0
MX27_PAD_ATA_DATA8__FEC_CRS 0x0
MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
MX27_PAD_ATA_DATA13__FEC_COL 0x0
MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX27_PAD_I2C_DATA__I2C_DATA 0x0
MX27_PAD_I2C_CLK__I2C_CLK 0x0
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
MX27_PAD_NFRB__NFRB 0x0
MX27_PAD_NFCLE__NFCLE 0x0
MX27_PAD_NFWP_B__NFWP_B 0x0
MX27_PAD_NFCE_B__NFCE_B 0x0
MX27_PAD_NFALE__NFALE 0x0
MX27_PAD_NFRE_B__NFRE_B 0x0
MX27_PAD_NFWE_B__NFWE_B 0x0
>;
};
pinctrl_owire: owiregrp {
fsl,pins = <
MX27_PAD_RTCK__OWIRE 0x0
>;
};
pinctrl_sdhc2: sdhc2grp {
fsl,pins = <
MX27_PAD_SD2_CLK__SD2_CLK 0x0
MX27_PAD_SD2_CMD__SD2_CMD 0x0
MX27_PAD_SD2_D0__SD2_D0 0x0
MX27_PAD_SD2_D1__SD2_D1 0x0
MX27_PAD_SD2_D2__SD2_D2 0x0
MX27_PAD_SD2_D3__SD2_D3 0x0
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX27_PAD_USBH1_TXDM__UART4_TXD 0x0
MX27_PAD_USBH1_RXDP__UART4_RXD 0x0
MX27_PAD_USBH1_TXDP__UART4_CTS 0x0
MX27_PAD_USBH1_FS__UART4_RTS 0x0
>;
};
pinctrl_uart8250_1: uart82501grp {
fsl,pins = <
MX27_PAD_USB_PWR__GPIO2_23 0x0
>;
};
pinctrl_uart8250_2: uart82502grp {
fsl,pins = <
MX27_PAD_USBH1_SUSP__GPIO2_22 0x0
>;
};
pinctrl_uart8250_3: uart82503grp {
fsl,pins = <
MX27_PAD_USBH1_OE_B__GPIO2_27 0x0
>;
};
pinctrl_uart8250_4: uart82504grp {
fsl,pins = <
MX27_PAD_USBH1_RXDM__GPIO2_30 0x0
>;
};
pinctrl_usbh2: usbh2grp {
fsl,pins = <
MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
MX27_PAD_USBH2_STP__USBH2_STP 0x0
MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink