mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
8d5a5ba9a8
Document devicetree bindings for ROHM BD71837 PMIC MFD. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
63 lines
1.8 KiB
Plaintext
63 lines
1.8 KiB
Plaintext
* ROHM BD71837 Power Management Integrated Circuit bindings
|
|
|
|
BD71837MWV is a programmable Power Management IC for powering single-core,
|
|
dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for
|
|
low BOM cost and compact solution footprint. It integrates 8 Buck
|
|
egulators and 7 LDOs to provide all the power rails required by the SoC and
|
|
the commonly used peripherals.
|
|
|
|
Datasheet for PMIC is available at:
|
|
https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
|
|
|
|
Required properties:
|
|
- compatible : Should be "rohm,bd71837".
|
|
- reg : I2C slave address.
|
|
- interrupt-parent : Phandle to the parent interrupt controller.
|
|
- interrupts : The interrupt line the device is connected to.
|
|
- clocks : The parent clock connected to PMIC. If this is missing
|
|
32768 KHz clock is assumed.
|
|
- #clock-cells : Should be 0.
|
|
- regulators: : List of child nodes that specify the regulators.
|
|
Please see ../regulator/rohm,bd71837-regulator.txt
|
|
|
|
Optional properties:
|
|
- clock-output-names : Should contain name for output clock.
|
|
|
|
Example:
|
|
|
|
/* external oscillator node */
|
|
osc: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <1>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc";
|
|
};
|
|
|
|
pmic: pmic@4b {
|
|
compatible = "rohm,bd71837";
|
|
reg = <0x4b>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <29 GPIO_ACTIVE_LOW>;
|
|
interrupt-names = "irq";
|
|
#clock-cells = <0>;
|
|
clocks = <&osc 0>;
|
|
clock-output-names = "bd71837-32k-out";
|
|
|
|
regulators {
|
|
buck1: BUCK1 {
|
|
regulator-name = "buck1";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <1250>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Clock consumer node */
|
|
rtc@0 {
|
|
compatible = "company,my-rtc";
|
|
clock-names = "my-clock";
|
|
clocks = <&pmic>;
|
|
};
|