mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 14:41:02 +07:00
0ba4f6e400
This patch fixed spelling typo in various template files within Documentation/Docbook. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1626 lines
47 KiB
XML
1626 lines
47 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
|
|
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
|
|
|
|
<book id="libataDevGuide">
|
|
<bookinfo>
|
|
<title>libATA Developer's Guide</title>
|
|
|
|
<authorgroup>
|
|
<author>
|
|
<firstname>Jeff</firstname>
|
|
<surname>Garzik</surname>
|
|
</author>
|
|
</authorgroup>
|
|
|
|
<copyright>
|
|
<year>2003-2006</year>
|
|
<holder>Jeff Garzik</holder>
|
|
</copyright>
|
|
|
|
<legalnotice>
|
|
<para>
|
|
The contents of this file are subject to the Open
|
|
Software License version 1.1 that can be found at
|
|
<ulink url="http://fedoraproject.org/wiki/Licensing:OSL1.1">http://fedoraproject.org/wiki/Licensing:OSL1.1</ulink>
|
|
and is included herein by reference.
|
|
</para>
|
|
|
|
<para>
|
|
Alternatively, the contents of this file may be used under the terms
|
|
of the GNU General Public License version 2 (the "GPL") as distributed
|
|
in the kernel source COPYING file, in which case the provisions of
|
|
the GPL are applicable instead of the above. If you wish to allow
|
|
the use of your version of this file only under the terms of the
|
|
GPL and not to allow others to use your version of this file under
|
|
the OSL, indicate your decision by deleting the provisions above and
|
|
replace them with the notice and other provisions required by the GPL.
|
|
If you do not delete the provisions above, a recipient may use your
|
|
version of this file under either the OSL or the GPL.
|
|
</para>
|
|
|
|
</legalnotice>
|
|
</bookinfo>
|
|
|
|
<toc></toc>
|
|
|
|
<chapter id="libataIntroduction">
|
|
<title>Introduction</title>
|
|
<para>
|
|
libATA is a library used inside the Linux kernel to support ATA host
|
|
controllers and devices. libATA provides an ATA driver API, class
|
|
transports for ATA and ATAPI devices, and SCSI<->ATA translation
|
|
for ATA devices according to the T10 SAT specification.
|
|
</para>
|
|
<para>
|
|
This Guide documents the libATA driver API, library functions, library
|
|
internals, and a couple sample ATA low-level drivers.
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="libataDriverApi">
|
|
<title>libata Driver API</title>
|
|
<para>
|
|
struct ata_port_operations is defined for every low-level libata
|
|
hardware driver, and it controls how the low-level driver
|
|
interfaces with the ATA and SCSI layers.
|
|
</para>
|
|
<para>
|
|
FIS-based drivers will hook into the system with ->qc_prep() and
|
|
->qc_issue() high-level hooks. Hardware which behaves in a manner
|
|
similar to PCI IDE hardware may utilize several generic helpers,
|
|
defining at a bare minimum the bus I/O addresses of the ATA shadow
|
|
register blocks.
|
|
</para>
|
|
<sect1>
|
|
<title>struct ata_port_operations</title>
|
|
|
|
<sect2><title>Disable ATA port</title>
|
|
<programlisting>
|
|
void (*port_disable) (struct ata_port *);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Called from ata_bus_probe() error path, as well as when
|
|
unregistering from the SCSI module (rmmod, hot unplug).
|
|
This function should do whatever needs to be done to take the
|
|
port out of use. In most cases, ata_port_disable() can be used
|
|
as this hook.
|
|
</para>
|
|
<para>
|
|
Called from ata_bus_probe() on a failed probe.
|
|
Called from ata_scsi_release().
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Post-IDENTIFY device configuration</title>
|
|
<programlisting>
|
|
void (*dev_config) (struct ata_port *, struct ata_device *);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Called after IDENTIFY [PACKET] DEVICE is issued to each device
|
|
found. Typically used to apply device-specific fixups prior to
|
|
issue of SET FEATURES - XFER MODE, and prior to operation.
|
|
</para>
|
|
<para>
|
|
This entry may be specified as NULL in ata_port_operations.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Set PIO/DMA mode</title>
|
|
<programlisting>
|
|
void (*set_piomode) (struct ata_port *, struct ata_device *);
|
|
void (*set_dmamode) (struct ata_port *, struct ata_device *);
|
|
void (*post_set_mode) (struct ata_port *);
|
|
unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned int);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Hooks called prior to the issue of SET FEATURES - XFER MODE
|
|
command. The optional ->mode_filter() hook is called when libata
|
|
has built a mask of the possible modes. This is passed to the
|
|
->mode_filter() function which should return a mask of valid modes
|
|
after filtering those unsuitable due to hardware limits. It is not
|
|
valid to use this interface to add modes.
|
|
</para>
|
|
<para>
|
|
dev->pio_mode and dev->dma_mode are guaranteed to be valid when
|
|
->set_piomode() and when ->set_dmamode() is called. The timings for
|
|
any other drive sharing the cable will also be valid at this point.
|
|
That is the library records the decisions for the modes of each
|
|
drive on a channel before it attempts to set any of them.
|
|
</para>
|
|
<para>
|
|
->post_set_mode() is
|
|
called unconditionally, after the SET FEATURES - XFER MODE
|
|
command completes successfully.
|
|
</para>
|
|
|
|
<para>
|
|
->set_piomode() is always called (if present), but
|
|
->set_dma_mode() is only called if DMA is possible.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Taskfile read/write</title>
|
|
<programlisting>
|
|
void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
|
|
void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
|
|
</programlisting>
|
|
|
|
<para>
|
|
->tf_load() is called to load the given taskfile into hardware
|
|
registers / DMA buffers. ->tf_read() is called to read the
|
|
hardware registers / DMA buffers, to obtain the current set of
|
|
taskfile register values.
|
|
Most drivers for taskfile-based hardware (PIO or MMIO) use
|
|
ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>PIO data read/write</title>
|
|
<programlisting>
|
|
void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
|
|
</programlisting>
|
|
|
|
<para>
|
|
All bmdma-style drivers must implement this hook. This is the low-level
|
|
operation that actually copies the data bytes during a PIO data
|
|
transfer.
|
|
Typically the driver will choose one of ata_sff_data_xfer_noirq(),
|
|
ata_sff_data_xfer(), or ata_sff_data_xfer32().
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>ATA command execute</title>
|
|
<programlisting>
|
|
void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
|
|
</programlisting>
|
|
|
|
<para>
|
|
causes an ATA command, previously loaded with
|
|
->tf_load(), to be initiated in hardware.
|
|
Most drivers for taskfile-based hardware use ata_sff_exec_command()
|
|
for this hook.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Per-cmd ATAPI DMA capabilities filter</title>
|
|
<programlisting>
|
|
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Allow low-level driver to filter ATA PACKET commands, returning a status
|
|
indicating whether or not it is OK to use DMA for the supplied PACKET
|
|
command.
|
|
</para>
|
|
<para>
|
|
This hook may be specified as NULL, in which case libata will
|
|
assume that atapi dma can be supported.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Read specific ATA shadow registers</title>
|
|
<programlisting>
|
|
u8 (*sff_check_status)(struct ata_port *ap);
|
|
u8 (*sff_check_altstatus)(struct ata_port *ap);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Reads the Status/AltStatus ATA shadow register from
|
|
hardware. On some hardware, reading the Status register has
|
|
the side effect of clearing the interrupt condition.
|
|
Most drivers for taskfile-based hardware use
|
|
ata_sff_check_status() for this hook.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Write specific ATA shadow register</title>
|
|
<programlisting>
|
|
void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Write the device control ATA shadow register to the hardware.
|
|
Most drivers don't need to define this.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Select ATA device on bus</title>
|
|
<programlisting>
|
|
void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Issues the low-level hardware command(s) that causes one of N
|
|
hardware devices to be considered 'selected' (active and
|
|
available for use) on the ATA bus. This generally has no
|
|
meaning on FIS-based devices.
|
|
</para>
|
|
<para>
|
|
Most drivers for taskfile-based hardware use
|
|
ata_sff_dev_select() for this hook.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Private tuning method</title>
|
|
<programlisting>
|
|
void (*set_mode) (struct ata_port *ap);
|
|
</programlisting>
|
|
|
|
<para>
|
|
By default libata performs drive and controller tuning in
|
|
accordance with the ATA timing rules and also applies blacklists
|
|
and cable limits. Some controllers need special handling and have
|
|
custom tuning rules, typically raid controllers that use ATA
|
|
commands but do not actually do drive timing.
|
|
</para>
|
|
|
|
<warning>
|
|
<para>
|
|
This hook should not be used to replace the standard controller
|
|
tuning logic when a controller has quirks. Replacing the default
|
|
tuning logic in that case would bypass handling for drive and
|
|
bridge quirks that may be important to data reliability. If a
|
|
controller needs to filter the mode selection it should use the
|
|
mode_filter hook instead.
|
|
</para>
|
|
</warning>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Control PCI IDE BMDMA engine</title>
|
|
<programlisting>
|
|
void (*bmdma_setup) (struct ata_queued_cmd *qc);
|
|
void (*bmdma_start) (struct ata_queued_cmd *qc);
|
|
void (*bmdma_stop) (struct ata_port *ap);
|
|
u8 (*bmdma_status) (struct ata_port *ap);
|
|
</programlisting>
|
|
|
|
<para>
|
|
When setting up an IDE BMDMA transaction, these hooks arm
|
|
(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
|
|
the hardware's DMA engine. ->bmdma_status is used to read the standard
|
|
PCI IDE DMA Status register.
|
|
</para>
|
|
|
|
<para>
|
|
These hooks are typically either no-ops, or simply not implemented, in
|
|
FIS-based drivers.
|
|
</para>
|
|
<para>
|
|
Most legacy IDE drivers use ata_bmdma_setup() for the bmdma_setup()
|
|
hook. ata_bmdma_setup() will write the pointer to the PRD table to
|
|
the IDE PRD Table Address register, enable DMA in the DMA Command
|
|
register, and call exec_command() to begin the transfer.
|
|
</para>
|
|
<para>
|
|
Most legacy IDE drivers use ata_bmdma_start() for the bmdma_start()
|
|
hook. ata_bmdma_start() will write the ATA_DMA_START flag to the DMA
|
|
Command register.
|
|
</para>
|
|
<para>
|
|
Many legacy IDE drivers use ata_bmdma_stop() for the bmdma_stop()
|
|
hook. ata_bmdma_stop() clears the ATA_DMA_START flag in the DMA
|
|
command register.
|
|
</para>
|
|
<para>
|
|
Many legacy IDE drivers use ata_bmdma_status() as the bmdma_status() hook.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>High-level taskfile hooks</title>
|
|
<programlisting>
|
|
void (*qc_prep) (struct ata_queued_cmd *qc);
|
|
int (*qc_issue) (struct ata_queued_cmd *qc);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Higher-level hooks, these two hooks can potentially supercede
|
|
several of the above taskfile/DMA engine hooks. ->qc_prep is
|
|
called after the buffers have been DMA-mapped, and is typically
|
|
used to populate the hardware's DMA scatter-gather table.
|
|
Most drivers use the standard ata_qc_prep() helper function, but
|
|
more advanced drivers roll their own.
|
|
</para>
|
|
<para>
|
|
->qc_issue is used to make a command active, once the hardware
|
|
and S/G tables have been prepared. IDE BMDMA drivers use the
|
|
helper function ata_qc_issue_prot() for taskfile protocol-based
|
|
dispatch. More advanced drivers implement their own ->qc_issue.
|
|
</para>
|
|
<para>
|
|
ata_qc_issue_prot() calls ->tf_load(), ->bmdma_setup(), and
|
|
->bmdma_start() as necessary to initiate a transfer.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Exception and probe handling (EH)</title>
|
|
<programlisting>
|
|
void (*eng_timeout) (struct ata_port *ap);
|
|
void (*phy_reset) (struct ata_port *ap);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Deprecated. Use ->error_handler() instead.
|
|
</para>
|
|
|
|
<programlisting>
|
|
void (*freeze) (struct ata_port *ap);
|
|
void (*thaw) (struct ata_port *ap);
|
|
</programlisting>
|
|
|
|
<para>
|
|
ata_port_freeze() is called when HSM violations or some other
|
|
condition disrupts normal operation of the port. A frozen port
|
|
is not allowed to perform any operation until the port is
|
|
thawed, which usually follows a successful reset.
|
|
</para>
|
|
|
|
<para>
|
|
The optional ->freeze() callback can be used for freezing the port
|
|
hardware-wise (e.g. mask interrupt and stop DMA engine). If a
|
|
port cannot be frozen hardware-wise, the interrupt handler
|
|
must ack and clear interrupts unconditionally while the port
|
|
is frozen.
|
|
</para>
|
|
<para>
|
|
The optional ->thaw() callback is called to perform the opposite of ->freeze():
|
|
prepare the port for normal operation once again. Unmask interrupts,
|
|
start DMA engine, etc.
|
|
</para>
|
|
|
|
<programlisting>
|
|
void (*error_handler) (struct ata_port *ap);
|
|
</programlisting>
|
|
|
|
<para>
|
|
->error_handler() is a driver's hook into probe, hotplug, and recovery
|
|
and other exceptional conditions. The primary responsibility of an
|
|
implementation is to call ata_do_eh() or ata_bmdma_drive_eh() with a set
|
|
of EH hooks as arguments:
|
|
</para>
|
|
|
|
<para>
|
|
'prereset' hook (may be NULL) is called during an EH reset, before any other actions
|
|
are taken.
|
|
</para>
|
|
|
|
<para>
|
|
'postreset' hook (may be NULL) is called after the EH reset is performed. Based on
|
|
existing conditions, severity of the problem, and hardware capabilities,
|
|
</para>
|
|
|
|
<para>
|
|
Either 'softreset' (may be NULL) or 'hardreset' (may be NULL) will be
|
|
called to perform the low-level EH reset.
|
|
</para>
|
|
|
|
<programlisting>
|
|
void (*post_internal_cmd) (struct ata_queued_cmd *qc);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Perform any hardware-specific actions necessary to finish processing
|
|
after executing a probe-time or EH-time command via ata_exec_internal().
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Hardware interrupt handling</title>
|
|
<programlisting>
|
|
irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
|
|
void (*irq_clear) (struct ata_port *);
|
|
</programlisting>
|
|
|
|
<para>
|
|
->irq_handler is the interrupt handling routine registered with
|
|
the system, by libata. ->irq_clear is called during probe just
|
|
before the interrupt handler is registered, to be sure hardware
|
|
is quiet.
|
|
</para>
|
|
<para>
|
|
The second argument, dev_instance, should be cast to a pointer
|
|
to struct ata_host_set.
|
|
</para>
|
|
<para>
|
|
Most legacy IDE drivers use ata_sff_interrupt() for the
|
|
irq_handler hook, which scans all ports in the host_set,
|
|
determines which queued command was active (if any), and calls
|
|
ata_sff_host_intr(ap,qc).
|
|
</para>
|
|
<para>
|
|
Most legacy IDE drivers use ata_sff_irq_clear() for the
|
|
irq_clear() hook, which simply clears the interrupt and error
|
|
flags in the DMA status register.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>SATA phy read/write</title>
|
|
<programlisting>
|
|
int (*scr_read) (struct ata_port *ap, unsigned int sc_reg,
|
|
u32 *val);
|
|
int (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
|
|
u32 val);
|
|
</programlisting>
|
|
|
|
<para>
|
|
Read and write standard SATA phy registers. Currently only used
|
|
if ->phy_reset hook called the sata_phy_reset() helper function.
|
|
sc_reg is one of SCR_STATUS, SCR_CONTROL, SCR_ERROR, or SCR_ACTIVE.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2><title>Init and shutdown</title>
|
|
<programlisting>
|
|
int (*port_start) (struct ata_port *ap);
|
|
void (*port_stop) (struct ata_port *ap);
|
|
void (*host_stop) (struct ata_host_set *host_set);
|
|
</programlisting>
|
|
|
|
<para>
|
|
->port_start() is called just after the data structures for each
|
|
port are initialized. Typically this is used to alloc per-port
|
|
DMA buffers / tables / rings, enable DMA engines, and similar
|
|
tasks. Some drivers also use this entry point as a chance to
|
|
allocate driver-private memory for ap->private_data.
|
|
</para>
|
|
<para>
|
|
Many drivers use ata_port_start() as this hook or call
|
|
it from their own port_start() hooks. ata_port_start()
|
|
allocates space for a legacy IDE PRD table and returns.
|
|
</para>
|
|
<para>
|
|
->port_stop() is called after ->host_stop(). Its sole function
|
|
is to release DMA/memory resources, now that they are no longer
|
|
actively being used. Many drivers also free driver-private
|
|
data from port at this time.
|
|
</para>
|
|
<para>
|
|
->host_stop() is called after all ->port_stop() calls
|
|
have completed. The hook must finalize hardware shutdown, release DMA
|
|
and other resources, etc.
|
|
This hook may be specified as NULL, in which case it is not called.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
</sect1>
|
|
</chapter>
|
|
|
|
<chapter id="libataEH">
|
|
<title>Error handling</title>
|
|
|
|
<para>
|
|
This chapter describes how errors are handled under libata.
|
|
Readers are advised to read SCSI EH
|
|
(Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first.
|
|
</para>
|
|
|
|
<sect1><title>Origins of commands</title>
|
|
<para>
|
|
In libata, a command is represented with struct ata_queued_cmd
|
|
or qc. qc's are preallocated during port initialization and
|
|
repetitively used for command executions. Currently only one
|
|
qc is allocated per port but yet-to-be-merged NCQ branch
|
|
allocates one for each tag and maps each qc to NCQ tag 1-to-1.
|
|
</para>
|
|
<para>
|
|
libata commands can originate from two sources - libata itself
|
|
and SCSI midlayer. libata internal commands are used for
|
|
initialization and error handling. All normal blk requests
|
|
and commands for SCSI emulation are passed as SCSI commands
|
|
through queuecommand callback of SCSI host template.
|
|
</para>
|
|
</sect1>
|
|
|
|
<sect1><title>How commands are issued</title>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry><term>Internal commands</term>
|
|
<listitem>
|
|
<para>
|
|
First, qc is allocated and initialized using
|
|
ata_qc_new_init(). Although ata_qc_new_init() doesn't
|
|
implement any wait or retry mechanism when qc is not
|
|
available, internal commands are currently issued only during
|
|
initialization and error recovery, so no other command is
|
|
active and allocation is guaranteed to succeed.
|
|
</para>
|
|
<para>
|
|
Once allocated qc's taskfile is initialized for the command to
|
|
be executed. qc currently has two mechanisms to notify
|
|
completion. One is via qc->complete_fn() callback and the
|
|
other is completion qc->waiting. qc->complete_fn() callback
|
|
is the asynchronous path used by normal SCSI translated
|
|
commands and qc->waiting is the synchronous (issuer sleeps in
|
|
process context) path used by internal commands.
|
|
</para>
|
|
<para>
|
|
Once initialization is complete, host_set lock is acquired
|
|
and the qc is issued.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>SCSI commands</term>
|
|
<listitem>
|
|
<para>
|
|
All libata drivers use ata_scsi_queuecmd() as
|
|
hostt->queuecommand callback. scmds can either be simulated
|
|
or translated. No qc is involved in processing a simulated
|
|
scmd. The result is computed right away and the scmd is
|
|
completed.
|
|
</para>
|
|
<para>
|
|
For a translated scmd, ata_qc_new_init() is invoked to
|
|
allocate a qc and the scmd is translated into the qc. SCSI
|
|
midlayer's completion notification function pointer is stored
|
|
into qc->scsidone.
|
|
</para>
|
|
<para>
|
|
qc->complete_fn() callback is used for completion
|
|
notification. ATA commands use ata_scsi_qc_complete() while
|
|
ATAPI commands use atapi_qc_complete(). Both functions end up
|
|
calling qc->scsidone to notify upper layer when the qc is
|
|
finished. After translation is completed, the qc is issued
|
|
with ata_qc_issue().
|
|
</para>
|
|
<para>
|
|
Note that SCSI midlayer invokes hostt->queuecommand while
|
|
holding host_set lock, so all above occur while holding
|
|
host_set lock.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
</variablelist>
|
|
</sect1>
|
|
|
|
<sect1><title>How commands are processed</title>
|
|
<para>
|
|
Depending on which protocol and which controller are used,
|
|
commands are processed differently. For the purpose of
|
|
discussion, a controller which uses taskfile interface and all
|
|
standard callbacks is assumed.
|
|
</para>
|
|
<para>
|
|
Currently 6 ATA command protocols are used. They can be
|
|
sorted into the following four categories according to how
|
|
they are processed.
|
|
</para>
|
|
|
|
<variablelist>
|
|
<varlistentry><term>ATA NO DATA or DMA</term>
|
|
<listitem>
|
|
<para>
|
|
ATA_PROT_NODATA and ATA_PROT_DMA fall into this category.
|
|
These types of commands don't require any software
|
|
intervention once issued. Device will raise interrupt on
|
|
completion.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>ATA PIO</term>
|
|
<listitem>
|
|
<para>
|
|
ATA_PROT_PIO is in this category. libata currently
|
|
implements PIO with polling. ATA_NIEN bit is set to turn
|
|
off interrupt and pio_task on ata_wq performs polling and
|
|
IO.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>ATAPI NODATA or DMA</term>
|
|
<listitem>
|
|
<para>
|
|
ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this
|
|
category. packet_task is used to poll BSY bit after
|
|
issuing PACKET command. Once BSY is turned off by the
|
|
device, packet_task transfers CDB and hands off processing
|
|
to interrupt handler.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>ATAPI PIO</term>
|
|
<listitem>
|
|
<para>
|
|
ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set
|
|
and, as in ATAPI NODATA or DMA, packet_task submits cdb.
|
|
However, after submitting cdb, further processing (data
|
|
transfer) is handed off to pio_task.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
</sect1>
|
|
|
|
<sect1><title>How commands are completed</title>
|
|
<para>
|
|
Once issued, all qc's are either completed with
|
|
ata_qc_complete() or time out. For commands which are handled
|
|
by interrupts, ata_host_intr() invokes ata_qc_complete(), and,
|
|
for PIO tasks, pio_task invokes ata_qc_complete(). In error
|
|
cases, packet_task may also complete commands.
|
|
</para>
|
|
<para>
|
|
ata_qc_complete() does the following.
|
|
</para>
|
|
|
|
<orderedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
DMA memory is unmapped.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
ATA_QCFLAG_ACTIVE is cleared from qc->flags.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
qc->complete_fn() callback is invoked. If the return value of
|
|
the callback is not zero. Completion is short circuited and
|
|
ata_qc_complete() returns.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
__ata_qc_complete() is called, which does
|
|
<orderedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
qc->flags is cleared to zero.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
ap->active_tag and qc->tag are poisoned.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
qc->waiting is cleared & completed (in that order).
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
qc is deallocated by clearing appropriate bit in ap->qactive.
|
|
</para>
|
|
</listitem>
|
|
|
|
</orderedlist>
|
|
</para>
|
|
</listitem>
|
|
|
|
</orderedlist>
|
|
|
|
<para>
|
|
So, it basically notifies upper layer and deallocates qc. One
|
|
exception is short-circuit path in #3 which is used by
|
|
atapi_qc_complete().
|
|
</para>
|
|
<para>
|
|
For all non-ATAPI commands, whether it fails or not, almost
|
|
the same code path is taken and very little error handling
|
|
takes place. A qc is completed with success status if it
|
|
succeeded, with failed status otherwise.
|
|
</para>
|
|
<para>
|
|
However, failed ATAPI commands require more handling as
|
|
REQUEST SENSE is needed to acquire sense data. If an ATAPI
|
|
command fails, ata_qc_complete() is invoked with error status,
|
|
which in turn invokes atapi_qc_complete() via
|
|
qc->complete_fn() callback.
|
|
</para>
|
|
<para>
|
|
This makes atapi_qc_complete() set scmd->result to
|
|
SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As
|
|
the sense data is empty but scmd->result is CHECK CONDITION,
|
|
SCSI midlayer will invoke EH for the scmd, and returning 1
|
|
makes ata_qc_complete() to return without deallocating the qc.
|
|
This leads us to ata_scsi_error() with partially completed qc.
|
|
</para>
|
|
|
|
</sect1>
|
|
|
|
<sect1><title>ata_scsi_error()</title>
|
|
<para>
|
|
ata_scsi_error() is the current transportt->eh_strategy_handler()
|
|
for libata. As discussed above, this will be entered in two
|
|
cases - timeout and ATAPI error completion. This function
|
|
calls low level libata driver's eng_timeout() callback, the
|
|
standard callback for which is ata_eng_timeout(). It checks
|
|
if a qc is active and calls ata_qc_timeout() on the qc if so.
|
|
Actual error handling occurs in ata_qc_timeout().
|
|
</para>
|
|
<para>
|
|
If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and
|
|
completes the qc. Note that as we're currently in EH, we
|
|
cannot call scsi_done. As described in SCSI EH doc, a
|
|
recovered scmd should be either retried with
|
|
scsi_queue_insert() or finished with scsi_finish_command().
|
|
Here, we override qc->scsidone with scsi_finish_command() and
|
|
calls ata_qc_complete().
|
|
</para>
|
|
<para>
|
|
If EH is invoked due to a failed ATAPI qc, the qc here is
|
|
completed but not deallocated. The purpose of this
|
|
half-completion is to use the qc as place holder to make EH
|
|
code reach this place. This is a bit hackish, but it works.
|
|
</para>
|
|
<para>
|
|
Once control reaches here, the qc is deallocated by invoking
|
|
__ata_qc_complete() explicitly. Then, internal qc for REQUEST
|
|
SENSE is issued. Once sense data is acquired, scmd is
|
|
finished by directly invoking scsi_finish_command() on the
|
|
scmd. Note that as we already have completed and deallocated
|
|
the qc which was associated with the scmd, we don't need
|
|
to/cannot call ata_qc_complete() again.
|
|
</para>
|
|
|
|
</sect1>
|
|
|
|
<sect1><title>Problems with the current EH</title>
|
|
|
|
<itemizedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
Error representation is too crude. Currently any and all
|
|
error conditions are represented with ATA STATUS and ERROR
|
|
registers. Errors which aren't ATA device errors are treated
|
|
as ATA device errors by setting ATA_ERR bit. Better error
|
|
descriptor which can properly represent ATA and other
|
|
errors/exceptions is needed.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
When handling timeouts, no action is taken to make device
|
|
forget about the timed out command and ready for new commands.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
EH handling via ata_scsi_error() is not properly protected
|
|
from usual command processing. On EH entrance, the device is
|
|
not in quiescent state. Timed out commands may succeed or
|
|
fail any time. pio_task and atapi_task may still be running.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
Too weak error recovery. Devices / controllers causing HSM
|
|
mismatch errors and other errors quite often require reset to
|
|
return to known state. Also, advanced error handling is
|
|
necessary to support features like NCQ and hotplug.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
ATA errors are directly handled in the interrupt handler and
|
|
PIO errors in pio_task. This is problematic for advanced
|
|
error handling for the following reasons.
|
|
</para>
|
|
<para>
|
|
First, advanced error handling often requires context and
|
|
internal qc execution.
|
|
</para>
|
|
<para>
|
|
Second, even a simple failure (say, CRC error) needs
|
|
information gathering and could trigger complex error handling
|
|
(say, resetting & reconfiguring). Having multiple code
|
|
paths to gather information, enter EH and trigger actions
|
|
makes life painful.
|
|
</para>
|
|
<para>
|
|
Third, scattered EH code makes implementing low level drivers
|
|
difficult. Low level drivers override libata callbacks. If
|
|
EH is scattered over several places, each affected callbacks
|
|
should perform its part of error handling. This can be error
|
|
prone and painful.
|
|
</para>
|
|
</listitem>
|
|
|
|
</itemizedlist>
|
|
</sect1>
|
|
</chapter>
|
|
|
|
<chapter id="libataExt">
|
|
<title>libata Library</title>
|
|
!Edrivers/ata/libata-core.c
|
|
</chapter>
|
|
|
|
<chapter id="libataInt">
|
|
<title>libata Core Internals</title>
|
|
!Idrivers/ata/libata-core.c
|
|
</chapter>
|
|
|
|
<chapter id="libataScsiInt">
|
|
<title>libata SCSI translation/emulation</title>
|
|
!Edrivers/ata/libata-scsi.c
|
|
!Idrivers/ata/libata-scsi.c
|
|
</chapter>
|
|
|
|
<chapter id="ataExceptions">
|
|
<title>ATA errors and exceptions</title>
|
|
|
|
<para>
|
|
This chapter tries to identify what error/exception conditions exist
|
|
for ATA/ATAPI devices and describe how they should be handled in
|
|
implementation-neutral way.
|
|
</para>
|
|
|
|
<para>
|
|
The term 'error' is used to describe conditions where either an
|
|
explicit error condition is reported from device or a command has
|
|
timed out.
|
|
</para>
|
|
|
|
<para>
|
|
The term 'exception' is either used to describe exceptional
|
|
conditions which are not errors (say, power or hotplug events), or
|
|
to describe both errors and non-error exceptional conditions. Where
|
|
explicit distinction between error and exception is necessary, the
|
|
term 'non-error exception' is used.
|
|
</para>
|
|
|
|
<sect1 id="excat">
|
|
<title>Exception categories</title>
|
|
<para>
|
|
Exceptions are described primarily with respect to legacy
|
|
taskfile + bus master IDE interface. If a controller provides
|
|
other better mechanism for error reporting, mapping those into
|
|
categories described below shouldn't be difficult.
|
|
</para>
|
|
|
|
<para>
|
|
In the following sections, two recovery actions - reset and
|
|
reconfiguring transport - are mentioned. These are described
|
|
further in <xref linkend="exrec"/>.
|
|
</para>
|
|
|
|
<sect2 id="excatHSMviolation">
|
|
<title>HSM violation</title>
|
|
<para>
|
|
This error is indicated when STATUS value doesn't match HSM
|
|
requirement during issuing or execution any ATA/ATAPI command.
|
|
</para>
|
|
|
|
<itemizedlist>
|
|
<title>Examples</title>
|
|
|
|
<listitem>
|
|
<para>
|
|
ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying
|
|
to issue a command.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
!BSY && !DRQ during PIO data transfer.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
DRQ on command completion.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
!BSY && ERR after CDB transfer starts but before the
|
|
last byte of CDB is transferred. ATA/ATAPI standard states
|
|
that "The device shall not terminate the PACKET command
|
|
with an error before the last byte of the command packet has
|
|
been written" in the error outputs description of PACKET
|
|
command and the state diagram doesn't include such
|
|
transitions.
|
|
</para>
|
|
</listitem>
|
|
|
|
</itemizedlist>
|
|
|
|
<para>
|
|
In these cases, HSM is violated and not much information
|
|
regarding the error can be acquired from STATUS or ERROR
|
|
register. IOW, this error can be anything - driver bug,
|
|
faulty device, controller and/or cable.
|
|
</para>
|
|
|
|
<para>
|
|
As HSM is violated, reset is necessary to restore known state.
|
|
Reconfiguring transport for lower speed might be helpful too
|
|
as transmission errors sometimes cause this kind of errors.
|
|
</para>
|
|
</sect2>
|
|
|
|
<sect2 id="excatDevErr">
|
|
<title>ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)</title>
|
|
|
|
<para>
|
|
These are errors detected and reported by ATA/ATAPI devices
|
|
indicating device problems. For this type of errors, STATUS
|
|
and ERROR register values are valid and describe error
|
|
condition. Note that some of ATA bus errors are detected by
|
|
ATA/ATAPI devices and reported using the same mechanism as
|
|
device errors. Those cases are described later in this
|
|
section.
|
|
</para>
|
|
|
|
<para>
|
|
For ATA commands, this type of errors are indicated by !BSY
|
|
&& ERR during command execution and on completion.
|
|
</para>
|
|
|
|
<para>For ATAPI commands,</para>
|
|
|
|
<itemizedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
!BSY && ERR && ABRT right after issuing PACKET
|
|
indicates that PACKET command is not supported and falls in
|
|
this category.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
!BSY && ERR(==CHK) && !ABRT after the last
|
|
byte of CDB is transferred indicates CHECK CONDITION and
|
|
doesn't fall in this category.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
!BSY && ERR(==CHK) && ABRT after the last byte
|
|
of CDB is transferred *probably* indicates CHECK CONDITION and
|
|
doesn't fall in this category.
|
|
</para>
|
|
</listitem>
|
|
|
|
</itemizedlist>
|
|
|
|
<para>
|
|
Of errors detected as above, the followings are not ATA/ATAPI
|
|
device errors but ATA bus errors and should be handled
|
|
according to <xref linkend="excatATAbusErr"/>.
|
|
</para>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry>
|
|
<term>CRC error during data transfer</term>
|
|
<listitem>
|
|
<para>
|
|
This is indicated by ICRC bit in the ERROR register and
|
|
means that corruption occurred during data transfer. Up to
|
|
ATA/ATAPI-7, the standard specifies that this bit is only
|
|
applicable to UDMA transfers but ATA/ATAPI-8 draft revision
|
|
1f says that the bit may be applicable to multiword DMA and
|
|
PIO.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term>ABRT error during data transfer or on completion</term>
|
|
<listitem>
|
|
<para>
|
|
Up to ATA/ATAPI-7, the standard specifies that ABRT could be
|
|
set on ICRC errors and on cases where a device is not able
|
|
to complete a command. Combined with the fact that MWDMA
|
|
and PIO transfer errors aren't allowed to use ICRC bit up to
|
|
ATA/ATAPI-7, it seems to imply that ABRT bit alone could
|
|
indicate transfer errors.
|
|
</para>
|
|
<para>
|
|
However, ATA/ATAPI-8 draft revision 1f removes the part
|
|
that ICRC errors can turn on ABRT. So, this is kind of
|
|
gray area. Some heuristics are needed here.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
</variablelist>
|
|
|
|
<para>
|
|
ATA/ATAPI device errors can be further categorized as follows.
|
|
</para>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry>
|
|
<term>Media errors</term>
|
|
<listitem>
|
|
<para>
|
|
This is indicated by UNC bit in the ERROR register. ATA
|
|
devices reports UNC error only after certain number of
|
|
retries cannot recover the data, so there's nothing much
|
|
else to do other than notifying upper layer.
|
|
</para>
|
|
<para>
|
|
READ and WRITE commands report CHS or LBA of the first
|
|
failed sector but ATA/ATAPI standard specifies that the
|
|
amount of transferred data on error completion is
|
|
indeterminate, so we cannot assume that sectors preceding
|
|
the failed sector have been transferred and thus cannot
|
|
complete those sectors successfully as SCSI does.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term>Media changed / media change requested error</term>
|
|
<listitem>
|
|
<para>
|
|
<<TODO: fill here>>
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>Address error</term>
|
|
<listitem>
|
|
<para>
|
|
This is indicated by IDNF bit in the ERROR register.
|
|
Report to upper layer.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>Other errors</term>
|
|
<listitem>
|
|
<para>
|
|
This can be invalid command or parameter indicated by ABRT
|
|
ERROR bit or some other error condition. Note that ABRT
|
|
bit can indicate a lot of things including ICRC and Address
|
|
errors. Heuristics needed.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
</variablelist>
|
|
|
|
<para>
|
|
Depending on commands, not all STATUS/ERROR bits are
|
|
applicable. These non-applicable bits are marked with
|
|
"na" in the output descriptions but up to ATA/ATAPI-7
|
|
no definition of "na" can be found. However,
|
|
ATA/ATAPI-8 draft revision 1f describes "N/A" as
|
|
follows.
|
|
</para>
|
|
|
|
<blockquote>
|
|
<variablelist>
|
|
<varlistentry><term>3.2.3.3a N/A</term>
|
|
<listitem>
|
|
<para>
|
|
A keyword the indicates a field has no defined value in
|
|
this standard and should not be checked by the host or
|
|
device. N/A fields should be cleared to zero.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
</blockquote>
|
|
|
|
<para>
|
|
So, it seems reasonable to assume that "na" bits are
|
|
cleared to zero by devices and thus need no explicit masking.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="excatATAPIcc">
|
|
<title>ATAPI device CHECK CONDITION</title>
|
|
|
|
<para>
|
|
ATAPI device CHECK CONDITION error is indicated by set CHK bit
|
|
(ERR bit) in the STATUS register after the last byte of CDB is
|
|
transferred for a PACKET command. For this kind of errors,
|
|
sense data should be acquired to gather information regarding
|
|
the errors. REQUEST SENSE packet command should be used to
|
|
acquire sense data.
|
|
</para>
|
|
|
|
<para>
|
|
Once sense data is acquired, this type of errors can be
|
|
handled similarly to other SCSI errors. Note that sense data
|
|
may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
|
|
&& ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
|
|
cases, the error should be considered as an ATA bus error and
|
|
handled according to <xref linkend="excatATAbusErr"/>.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="excatNCQerr">
|
|
<title>ATA device error (NCQ)</title>
|
|
|
|
<para>
|
|
NCQ command error is indicated by cleared BSY and set ERR bit
|
|
during NCQ command phase (one or more NCQ commands
|
|
outstanding). Although STATUS and ERROR registers will
|
|
contain valid values describing the error, READ LOG EXT is
|
|
required to clear the error condition, determine which command
|
|
has failed and acquire more information.
|
|
</para>
|
|
|
|
<para>
|
|
READ LOG EXT Log Page 10h reports which tag has failed and
|
|
taskfile register values describing the error. With this
|
|
information the failed command can be handled as a normal ATA
|
|
command error as in <xref linkend="excatDevErr"/> and all
|
|
other in-flight commands must be retried. Note that this
|
|
retry should not be counted - it's likely that commands
|
|
retried this way would have completed normally if it were not
|
|
for the failed command.
|
|
</para>
|
|
|
|
<para>
|
|
Note that ATA bus errors can be reported as ATA device NCQ
|
|
errors. This should be handled as described in <xref
|
|
linkend="excatATAbusErr"/>.
|
|
</para>
|
|
|
|
<para>
|
|
If READ LOG EXT Log Page 10h fails or reports NQ, we're
|
|
thoroughly screwed. This condition should be treated
|
|
according to <xref linkend="excatHSMviolation"/>.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="excatATAbusErr">
|
|
<title>ATA bus error</title>
|
|
|
|
<para>
|
|
ATA bus error means that data corruption occurred during
|
|
transmission over ATA bus (SATA or PATA). This type of errors
|
|
can be indicated by
|
|
</para>
|
|
|
|
<itemizedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
ICRC or ABRT error as described in <xref linkend="excatDevErr"/>.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
Controller-specific error completion with error information
|
|
indicating transmission error.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
On some controllers, command timeout. In this case, there may
|
|
be a mechanism to determine that the timeout is due to
|
|
transmission error.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
Unknown/random errors, timeouts and all sorts of weirdities.
|
|
</para>
|
|
</listitem>
|
|
|
|
</itemizedlist>
|
|
|
|
<para>
|
|
As described above, transmission errors can cause wide variety
|
|
of symptoms ranging from device ICRC error to random device
|
|
lockup, and, for many cases, there is no way to tell if an
|
|
error condition is due to transmission error or not;
|
|
therefore, it's necessary to employ some kind of heuristic
|
|
when dealing with errors and timeouts. For example,
|
|
encountering repetitive ABRT errors for known supported
|
|
command is likely to indicate ATA bus error.
|
|
</para>
|
|
|
|
<para>
|
|
Once it's determined that ATA bus errors have possibly
|
|
occurred, lowering ATA bus transmission speed is one of
|
|
actions which may alleviate the problem. See <xref
|
|
linkend="exrecReconf"/> for more information.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="excatPCIbusErr">
|
|
<title>PCI bus error</title>
|
|
|
|
<para>
|
|
Data corruption or other failures during transmission over PCI
|
|
(or other system bus). For standard BMDMA, this is indicated
|
|
by Error bit in the BMDMA Status register. This type of
|
|
errors must be logged as it indicates something is very wrong
|
|
with the system. Resetting host controller is recommended.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="excatLateCompletion">
|
|
<title>Late completion</title>
|
|
|
|
<para>
|
|
This occurs when timeout occurs and the timeout handler finds
|
|
out that the timed out command has completed successfully or
|
|
with error. This is usually caused by lost interrupts. This
|
|
type of errors must be logged. Resetting host controller is
|
|
recommended.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="excatUnknown">
|
|
<title>Unknown error (timeout)</title>
|
|
|
|
<para>
|
|
This is when timeout occurs and the command is still
|
|
processing or the host and device are in unknown state. When
|
|
this occurs, HSM could be in any valid or invalid state. To
|
|
bring the device to known state and make it forget about the
|
|
timed out command, resetting is necessary. The timed out
|
|
command may be retried.
|
|
</para>
|
|
|
|
<para>
|
|
Timeouts can also be caused by transmission errors. Refer to
|
|
<xref linkend="excatATAbusErr"/> for more details.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="excatHoplugPM">
|
|
<title>Hotplug and power management exceptions</title>
|
|
|
|
<para>
|
|
<<TODO: fill here>>
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
</sect1>
|
|
|
|
<sect1 id="exrec">
|
|
<title>EH recovery actions</title>
|
|
|
|
<para>
|
|
This section discusses several important recovery actions.
|
|
</para>
|
|
|
|
<sect2 id="exrecClr">
|
|
<title>Clearing error condition</title>
|
|
|
|
<para>
|
|
Many controllers require its error registers to be cleared by
|
|
error handler. Different controllers may have different
|
|
requirements.
|
|
</para>
|
|
|
|
<para>
|
|
For SATA, it's strongly recommended to clear at least SError
|
|
register during error handling.
|
|
</para>
|
|
</sect2>
|
|
|
|
<sect2 id="exrecRst">
|
|
<title>Reset</title>
|
|
|
|
<para>
|
|
During EH, resetting is necessary in the following cases.
|
|
</para>
|
|
|
|
<itemizedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
HSM is in unknown or invalid state
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
HBA is in unknown or invalid state
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
EH needs to make HBA/device forget about in-flight commands
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
HBA/device behaves weirdly
|
|
</para>
|
|
</listitem>
|
|
|
|
</itemizedlist>
|
|
|
|
<para>
|
|
Resetting during EH might be a good idea regardless of error
|
|
condition to improve EH robustness. Whether to reset both or
|
|
either one of HBA and device depends on situation but the
|
|
following scheme is recommended.
|
|
</para>
|
|
|
|
<itemizedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
When it's known that HBA is in ready state but ATA/ATAPI
|
|
device is in unknown state, reset only device.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
If HBA is in unknown state, reset both HBA and device.
|
|
</para>
|
|
</listitem>
|
|
|
|
</itemizedlist>
|
|
|
|
<para>
|
|
HBA resetting is implementation specific. For a controller
|
|
complying to taskfile/BMDMA PCI IDE, stopping active DMA
|
|
transaction may be sufficient iff BMDMA state is the only HBA
|
|
context. But even mostly taskfile/BMDMA PCI IDE complying
|
|
controllers may have implementation specific requirements and
|
|
mechanism to reset themselves. This must be addressed by
|
|
specific drivers.
|
|
</para>
|
|
|
|
<para>
|
|
OTOH, ATA/ATAPI standard describes in detail ways to reset
|
|
ATA/ATAPI devices.
|
|
</para>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry><term>PATA hardware reset</term>
|
|
<listitem>
|
|
<para>
|
|
This is hardware initiated device reset signalled with
|
|
asserted PATA RESET- signal. There is no standard way to
|
|
initiate hardware reset from software although some
|
|
hardware provides registers that allow driver to directly
|
|
tweak the RESET- signal.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>Software reset</term>
|
|
<listitem>
|
|
<para>
|
|
This is achieved by turning CONTROL SRST bit on for at
|
|
least 5us. Both PATA and SATA support it but, in case of
|
|
SATA, this may require controller-specific support as the
|
|
second Register FIS to clear SRST should be transmitted
|
|
while BSY bit is still set. Note that on PATA, this resets
|
|
both master and slave devices on a channel.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>EXECUTE DEVICE DIAGNOSTIC command</term>
|
|
<listitem>
|
|
<para>
|
|
Although ATA/ATAPI standard doesn't describe exactly, EDD
|
|
implies some level of resetting, possibly similar level
|
|
with software reset. Host-side EDD protocol can be handled
|
|
with normal command processing and most SATA controllers
|
|
should be able to handle EDD's just like other commands.
|
|
As in software reset, EDD affects both devices on a PATA
|
|
bus.
|
|
</para>
|
|
<para>
|
|
Although EDD does reset devices, this doesn't suit error
|
|
handling as EDD cannot be issued while BSY is set and it's
|
|
unclear how it will act when device is in unknown/weird
|
|
state.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>ATAPI DEVICE RESET command</term>
|
|
<listitem>
|
|
<para>
|
|
This is very similar to software reset except that reset
|
|
can be restricted to the selected device without affecting
|
|
the other device sharing the cable.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry><term>SATA phy reset</term>
|
|
<listitem>
|
|
<para>
|
|
This is the preferred way of resetting a SATA device. In
|
|
effect, it's identical to PATA hardware reset. Note that
|
|
this can be done with the standard SCR Control register.
|
|
As such, it's usually easier to implement than software
|
|
reset.
|
|
</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
</variablelist>
|
|
|
|
<para>
|
|
One more thing to consider when resetting devices is that
|
|
resetting clears certain configuration parameters and they
|
|
need to be set to their previous or newly adjusted values
|
|
after reset.
|
|
</para>
|
|
|
|
<para>
|
|
Parameters affected are.
|
|
</para>
|
|
|
|
<itemizedlist>
|
|
|
|
<listitem>
|
|
<para>
|
|
CHS set up with INITIALIZE DEVICE PARAMETERS (seldom used)
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
Parameters set with SET FEATURES including transfer mode setting
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
Block count set with SET MULTIPLE MODE
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>
|
|
Other parameters (SET MAX, MEDIA LOCK...)
|
|
</para>
|
|
</listitem>
|
|
|
|
</itemizedlist>
|
|
|
|
<para>
|
|
ATA/ATAPI standard specifies that some parameters must be
|
|
maintained across hardware or software reset, but doesn't
|
|
strictly specify all of them. Always reconfiguring needed
|
|
parameters after reset is required for robustness. Note that
|
|
this also applies when resuming from deep sleep (power-off).
|
|
</para>
|
|
|
|
<para>
|
|
Also, ATA/ATAPI standard requires that IDENTIFY DEVICE /
|
|
IDENTIFY PACKET DEVICE is issued after any configuration
|
|
parameter is updated or a hardware reset and the result used
|
|
for further operation. OS driver is required to implement
|
|
revalidation mechanism to support this.
|
|
</para>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="exrecReconf">
|
|
<title>Reconfigure transport</title>
|
|
|
|
<para>
|
|
For both PATA and SATA, a lot of corners are cut for cheap
|
|
connectors, cables or controllers and it's quite common to see
|
|
high transmission error rate. This can be mitigated by
|
|
lowering transmission speed.
|
|
</para>
|
|
|
|
<para>
|
|
The following is a possible scheme Jeff Garzik suggested.
|
|
</para>
|
|
|
|
<blockquote>
|
|
<para>
|
|
If more than $N (3?) transmission errors happen in 15 minutes,
|
|
</para>
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para>
|
|
if SATA, decrease SATA PHY speed. if speed cannot be decreased,
|
|
</para>
|
|
</listitem>
|
|
<listitem>
|
|
<para>
|
|
decrease UDMA xfer speed. if at UDMA0, switch to PIO4,
|
|
</para>
|
|
</listitem>
|
|
<listitem>
|
|
<para>
|
|
decrease PIO xfer speed. if at PIO3, complain, but continue
|
|
</para>
|
|
</listitem>
|
|
</itemizedlist>
|
|
</blockquote>
|
|
|
|
</sect2>
|
|
|
|
</sect1>
|
|
|
|
</chapter>
|
|
|
|
<chapter id="PiixInt">
|
|
<title>ata_piix Internals</title>
|
|
!Idrivers/ata/ata_piix.c
|
|
</chapter>
|
|
|
|
<chapter id="SILInt">
|
|
<title>sata_sil Internals</title>
|
|
!Idrivers/ata/sata_sil.c
|
|
</chapter>
|
|
|
|
<chapter id="libataThanks">
|
|
<title>Thanks</title>
|
|
<para>
|
|
The bulk of the ATA knowledge comes thanks to long conversations with
|
|
Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
|
|
and SCSI specifications.
|
|
</para>
|
|
<para>
|
|
Thanks to Alan Cox for pointing out similarities
|
|
between SATA and SCSI, and in general for motivation to hack on
|
|
libata.
|
|
</para>
|
|
<para>
|
|
libata's device detection
|
|
method, ata_pio_devchk, and in general all the early probing was
|
|
based on extensive study of Hale Landis's probe/reset code in his
|
|
ATADRVR driver (www.ata-atapi.com).
|
|
</para>
|
|
</chapter>
|
|
|
|
</book>
|