mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 00:06:28 +07:00
589a2d3f18
Add the PCIe host bridge found on Tegra X1. It implements two root ports that support x4 and x1 configurations, respectively. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
1353 lines
35 KiB
Plaintext
1353 lines
35 KiB
Plaintext
#include <dt-bindings/clock/tegra210-car.h>
|
|
#include <dt-bindings/gpio/tegra-gpio.h>
|
|
#include <dt-bindings/memory/tegra210-mc.h>
|
|
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/tegra124-soctherm.h>
|
|
|
|
/ {
|
|
compatible = "nvidia,tegra210";
|
|
interrupt-parent = <&lic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
pcie-controller@01003000 {
|
|
compatible = "nvidia,tegra210-pcie";
|
|
device_type = "pci";
|
|
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
|
|
0x0 0x01003800 0x0 0x00000800 /* AFI registers */
|
|
0x0 0x02000000 0x0 0x10000000>; /* configuration space */
|
|
reg-names = "pads", "afi", "cs";
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
|
|
interrupt-names = "intr", "msi";
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
|
|
0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
|
|
0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
|
|
0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
|
|
0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
|
|
|
|
clocks = <&tegra_car TEGRA210_CLK_PCIE>,
|
|
<&tegra_car TEGRA210_CLK_AFI>,
|
|
<&tegra_car TEGRA210_CLK_PLL_E>,
|
|
<&tegra_car TEGRA210_CLK_CML0>;
|
|
clock-names = "pex", "afi", "pll_e", "cml";
|
|
resets = <&tegra_car 70>,
|
|
<&tegra_car 72>,
|
|
<&tegra_car 74>;
|
|
reset-names = "pex", "afi", "pcie_x";
|
|
status = "disabled";
|
|
|
|
pci@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
|
|
reg = <0x000800 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <4>;
|
|
};
|
|
|
|
pci@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
|
|
reg = <0x001000 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <1>;
|
|
};
|
|
};
|
|
|
|
host1x@50000000 {
|
|
compatible = "nvidia,tegra210-host1x", "simple-bus";
|
|
reg = <0x0 0x50000000 0x0 0x00034000>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
|
|
clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
|
|
clock-names = "host1x";
|
|
resets = <&tegra_car 28>;
|
|
reset-names = "host1x";
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>;
|
|
|
|
dpaux1: dpaux@54040000 {
|
|
compatible = "nvidia,tegra210-dpaux";
|
|
reg = <0x0 0x54040000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DPAUX1>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>;
|
|
clock-names = "dpaux", "parent";
|
|
resets = <&tegra_car 207>;
|
|
reset-names = "dpaux";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
|
|
state_dpaux1_aux: pinmux-aux {
|
|
groups = "dpaux-io";
|
|
function = "aux";
|
|
};
|
|
|
|
state_dpaux1_i2c: pinmux-i2c {
|
|
groups = "dpaux-io";
|
|
function = "i2c";
|
|
};
|
|
|
|
state_dpaux1_off: pinmux-off {
|
|
groups = "dpaux-io";
|
|
function = "off";
|
|
};
|
|
|
|
i2c-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
vi@54080000 {
|
|
compatible = "nvidia,tegra210-vi";
|
|
reg = <0x0 0x54080000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tsec@54100000 {
|
|
compatible = "nvidia,tegra210-tsec";
|
|
reg = <0x0 0x54100000 0x0 0x00040000>;
|
|
};
|
|
|
|
dc@54200000 {
|
|
compatible = "nvidia,tegra210-dc";
|
|
reg = <0x0 0x54200000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DISP1>,
|
|
<&tegra_car TEGRA210_CLK_PLL_P>;
|
|
clock-names = "dc", "parent";
|
|
resets = <&tegra_car 27>;
|
|
reset-names = "dc";
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_DC>;
|
|
|
|
nvidia,head = <0>;
|
|
};
|
|
|
|
dc@54240000 {
|
|
compatible = "nvidia,tegra210-dc";
|
|
reg = <0x0 0x54240000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DISP2>,
|
|
<&tegra_car TEGRA210_CLK_PLL_P>;
|
|
clock-names = "dc", "parent";
|
|
resets = <&tegra_car 26>;
|
|
reset-names = "dc";
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_DCB>;
|
|
|
|
nvidia,head = <1>;
|
|
};
|
|
|
|
dsi@54300000 {
|
|
compatible = "nvidia,tegra210-dsi";
|
|
reg = <0x0 0x54300000 0x0 0x00040000>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DSIA>,
|
|
<&tegra_car TEGRA210_CLK_DSIALP>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
|
|
clock-names = "dsi", "lp", "parent";
|
|
resets = <&tegra_car 48>;
|
|
reset-names = "dsi";
|
|
power-domains = <&pd_sor>;
|
|
nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
vic@54340000 {
|
|
compatible = "nvidia,tegra210-vic";
|
|
reg = <0x0 0x54340000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nvjpg@54380000 {
|
|
compatible = "nvidia,tegra210-nvjpg";
|
|
reg = <0x0 0x54380000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dsi@54400000 {
|
|
compatible = "nvidia,tegra210-dsi";
|
|
reg = <0x0 0x54400000 0x0 0x00040000>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DSIB>,
|
|
<&tegra_car TEGRA210_CLK_DSIBLP>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
|
|
clock-names = "dsi", "lp", "parent";
|
|
resets = <&tegra_car 82>;
|
|
reset-names = "dsi";
|
|
power-domains = <&pd_sor>;
|
|
nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
nvdec@54480000 {
|
|
compatible = "nvidia,tegra210-nvdec";
|
|
reg = <0x0 0x54480000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nvenc@544c0000 {
|
|
compatible = "nvidia,tegra210-nvenc";
|
|
reg = <0x0 0x544c0000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tsec@54500000 {
|
|
compatible = "nvidia,tegra210-tsec";
|
|
reg = <0x0 0x54500000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sor@54540000 {
|
|
compatible = "nvidia,tegra210-sor";
|
|
reg = <0x0 0x54540000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SOR0>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>,
|
|
<&tegra_car TEGRA210_CLK_SOR_SAFE>;
|
|
clock-names = "sor", "parent", "dp", "safe";
|
|
resets = <&tegra_car 182>;
|
|
reset-names = "sor";
|
|
pinctrl-0 = <&state_dpaux_aux>;
|
|
pinctrl-1 = <&state_dpaux_i2c>;
|
|
pinctrl-2 = <&state_dpaux_off>;
|
|
pinctrl-names = "aux", "i2c", "off";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sor@54580000 {
|
|
compatible = "nvidia,tegra210-sor1";
|
|
reg = <0x0 0x54580000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SOR1>,
|
|
<&tegra_car TEGRA210_CLK_SOR1_SRC>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>,
|
|
<&tegra_car TEGRA210_CLK_SOR_SAFE>;
|
|
clock-names = "sor", "source", "parent", "dp", "safe";
|
|
resets = <&tegra_car 183>;
|
|
reset-names = "sor";
|
|
pinctrl-0 = <&state_dpaux1_aux>;
|
|
pinctrl-1 = <&state_dpaux1_i2c>;
|
|
pinctrl-2 = <&state_dpaux1_off>;
|
|
pinctrl-names = "aux", "i2c", "off";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dpaux: dpaux@545c0000 {
|
|
compatible = "nvidia,tegra124-dpaux";
|
|
reg = <0x0 0x545c0000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>;
|
|
clock-names = "dpaux", "parent";
|
|
resets = <&tegra_car 181>;
|
|
reset-names = "dpaux";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
|
|
state_dpaux_aux: pinmux-aux {
|
|
groups = "dpaux-io";
|
|
function = "aux";
|
|
};
|
|
|
|
state_dpaux_i2c: pinmux-i2c {
|
|
groups = "dpaux-io";
|
|
function = "i2c";
|
|
};
|
|
|
|
state_dpaux_off: pinmux-off {
|
|
groups = "dpaux-io";
|
|
function = "off";
|
|
};
|
|
|
|
i2c-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
isp@54600000 {
|
|
compatible = "nvidia,tegra210-isp";
|
|
reg = <0x0 0x54600000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
isp@54680000 {
|
|
compatible = "nvidia,tegra210-isp";
|
|
reg = <0x0 0x54680000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@546c0000 {
|
|
compatible = "nvidia,tegra210-i2c-vi";
|
|
reg = <0x0 0x546c0000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@50041000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0x50041000 0x0 0x1000>,
|
|
<0x0 0x50042000 0x0 0x2000>,
|
|
<0x0 0x50044000 0x0 0x2000>,
|
|
<0x0 0x50046000 0x0 0x2000>;
|
|
interrupts = <GIC_PPI 9
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
gpu@57000000 {
|
|
compatible = "nvidia,gm20b";
|
|
reg = <0x0 0x57000000 0x0 0x01000000>,
|
|
<0x0 0x58000000 0x0 0x01000000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "stall", "nonstall";
|
|
clocks = <&tegra_car TEGRA210_CLK_GPU>,
|
|
<&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
|
|
<&tegra_car TEGRA210_CLK_PLL_G_REF>;
|
|
clock-names = "gpu", "pwr", "ref";
|
|
resets = <&tegra_car 184>;
|
|
reset-names = "gpu";
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_GPU>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
lic: interrupt-controller@60004000 {
|
|
compatible = "nvidia,tegra210-ictlr";
|
|
reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */
|
|
<0x0 0x60004100 0x0 0x40>, /* secondary controller */
|
|
<0x0 0x60004200 0x0 0x40>, /* tertiary controller */
|
|
<0x0 0x60004300 0x0 0x40>, /* quaternary controller */
|
|
<0x0 0x60004400 0x0 0x40>, /* quinary controller */
|
|
<0x0 0x60004500 0x0 0x40>; /* senary controller */
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
timer@60005000 {
|
|
compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer";
|
|
reg = <0x0 0x60005000 0x0 0x400>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_TIMER>;
|
|
clock-names = "timer";
|
|
};
|
|
|
|
tegra_car: clock@60006000 {
|
|
compatible = "nvidia,tegra210-car";
|
|
reg = <0x0 0x60006000 0x0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
flow-controller@60007000 {
|
|
compatible = "nvidia,tegra210-flowctrl";
|
|
reg = <0x0 0x60007000 0x0 0x1000>;
|
|
};
|
|
|
|
gpio: gpio@6000d000 {
|
|
compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
|
|
reg = <0x0 0x6000d000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
apbdma: dma@60020000 {
|
|
compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma";
|
|
reg = <0x0 0x60020000 0x0 0x1400>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_APBDMA>;
|
|
clock-names = "dma";
|
|
resets = <&tegra_car 34>;
|
|
reset-names = "dma";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
apbmisc@70000800 {
|
|
compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc";
|
|
reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */
|
|
<0x0 0x7000e864 0x0 0x04>; /* Strapping options */
|
|
};
|
|
|
|
pinmux: pinmux@700008d4 {
|
|
compatible = "nvidia,tegra210-pinmux";
|
|
reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
|
|
<0x0 0x70003000 0x0 0x294>; /* Mux registers */
|
|
};
|
|
|
|
/*
|
|
* There are two serial driver i.e. 8250 based simple serial
|
|
* driver and APB DMA based serial driver for higher baudrate
|
|
* and performance. To enable the 8250 based driver, the compatible
|
|
* is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
|
|
* the APB DMA based serial driver, the compatible is
|
|
* "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
|
|
*/
|
|
uarta: serial@70006000 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006000 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTA>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 6>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 8>, <&apbdma 8>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartb: serial@70006040 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006040 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTB>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 7>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 9>, <&apbdma 9>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartc: serial@70006200 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006200 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTC>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 55>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 10>, <&apbdma 10>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartd: serial@70006300 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006300 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTD>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 65>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 19>, <&apbdma 19>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@7000a000 {
|
|
compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm";
|
|
reg = <0x0 0x7000a000 0x0 0x100>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&tegra_car TEGRA210_CLK_PWM>;
|
|
clock-names = "pwm";
|
|
resets = <&tegra_car 17>;
|
|
reset-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c000 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C1>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 12>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 21>, <&apbdma 21>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c400 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c400 0x0 0x100>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C2>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 54>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 22>, <&apbdma 22>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c500 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c500 0x0 0x100>;
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C3>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 67>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 23>, <&apbdma 23>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c700 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c700 0x0 0x100>;
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C4>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 103>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 26>, <&apbdma 26>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-0 = <&state_dpaux1_i2c>;
|
|
pinctrl-1 = <&state_dpaux1_off>;
|
|
pinctrl-names = "default", "idle";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000d000 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000d000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C5>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 47>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 24>, <&apbdma 24>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000d100 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000d100 0x0 0x100>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C6>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 166>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 30>, <&apbdma 30>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-0 = <&state_dpaux_i2c>;
|
|
pinctrl-1 = <&state_dpaux_off>;
|
|
pinctrl-names = "default", "idle";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d400 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d400 0x0 0x200>;
|
|
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC1>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 41>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 15>, <&apbdma 15>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d600 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d600 0x0 0x200>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC2>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 44>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 16>, <&apbdma 16>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d800 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d800 0x0 0x200>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC3>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 46>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 17>, <&apbdma 17>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000da00 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000da00 0x0 0x200>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC4>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 68>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 18>, <&apbdma 18>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc@7000e000 {
|
|
compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
|
|
reg = <0x0 0x7000e000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_RTC>;
|
|
clock-names = "rtc";
|
|
};
|
|
|
|
pmc: pmc@7000e400 {
|
|
compatible = "nvidia,tegra210-pmc";
|
|
reg = <0x0 0x7000e400 0x0 0x400>;
|
|
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
|
|
clock-names = "pclk", "clk32k_in";
|
|
|
|
powergates {
|
|
pd_audio: aud {
|
|
clocks = <&tegra_car TEGRA210_CLK_APE>,
|
|
<&tegra_car TEGRA210_CLK_APB2APE>;
|
|
resets = <&tegra_car 198>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_sor: sor {
|
|
clocks = <&tegra_car TEGRA210_CLK_SOR0>,
|
|
<&tegra_car TEGRA210_CLK_SOR1>,
|
|
<&tegra_car TEGRA210_CLK_CSI>,
|
|
<&tegra_car TEGRA210_CLK_DSIA>,
|
|
<&tegra_car TEGRA210_CLK_DSIB>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX1>,
|
|
<&tegra_car TEGRA210_CLK_MIPI_CAL>;
|
|
resets = <&tegra_car TEGRA210_CLK_SOR0>,
|
|
<&tegra_car TEGRA210_CLK_SOR1>,
|
|
<&tegra_car TEGRA210_CLK_CSI>,
|
|
<&tegra_car TEGRA210_CLK_DSIA>,
|
|
<&tegra_car TEGRA210_CLK_DSIB>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX1>,
|
|
<&tegra_car TEGRA210_CLK_MIPI_CAL>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_xusbss: xusba {
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
|
|
resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_xusbdev: xusbb {
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
|
|
resets = <&tegra_car 95>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_xusbhost: xusbc {
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
|
|
resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
fuse@7000f800 {
|
|
compatible = "nvidia,tegra210-efuse";
|
|
reg = <0x0 0x7000f800 0x0 0x400>;
|
|
clocks = <&tegra_car TEGRA210_CLK_FUSE>;
|
|
clock-names = "fuse";
|
|
resets = <&tegra_car 39>;
|
|
reset-names = "fuse";
|
|
};
|
|
|
|
mc: memory-controller@70019000 {
|
|
compatible = "nvidia,tegra210-mc";
|
|
reg = <0x0 0x70019000 0x0 0x1000>;
|
|
clocks = <&tegra_car TEGRA210_CLK_MC>;
|
|
clock-names = "mc";
|
|
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#iommu-cells = <1>;
|
|
};
|
|
|
|
hda@70030000 {
|
|
compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
|
|
reg = <0x0 0x70030000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_HDA>,
|
|
<&tegra_car TEGRA210_CLK_HDA2HDMI>,
|
|
<&tegra_car TEGRA210_CLK_HDA2CODEC_2X>;
|
|
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
|
|
resets = <&tegra_car 125>, /* hda */
|
|
<&tegra_car 128>, /* hda2hdmi */
|
|
<&tegra_car 111>; /* hda2codec_2x */
|
|
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@70090000 {
|
|
compatible = "nvidia,tegra210-xusb";
|
|
reg = <0x0 0x70090000 0x0 0x8000>,
|
|
<0x0 0x70098000 0x0 0x1000>,
|
|
<0x0 0x70099000 0x0 0x1000>;
|
|
reg-names = "hcd", "fpci", "ipfs";
|
|
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_SS>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
|
|
<&tegra_car TEGRA210_CLK_PLL_U_480M>,
|
|
<&tegra_car TEGRA210_CLK_CLK_M>,
|
|
<&tegra_car TEGRA210_CLK_PLL_E>;
|
|
clock-names = "xusb_host", "xusb_host_src",
|
|
"xusb_falcon_src", "xusb_ss",
|
|
"xusb_ss_div2", "xusb_ss_src",
|
|
"xusb_hs_src", "xusb_fs_src",
|
|
"pll_u_480m", "clk_m", "pll_e";
|
|
resets = <&tegra_car 89>, <&tegra_car 156>,
|
|
<&tegra_car 143>;
|
|
reset-names = "xusb_host", "xusb_ss", "xusb_src";
|
|
|
|
nvidia,xusb-padctl = <&padctl>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
padctl: padctl@7009f000 {
|
|
compatible = "nvidia,tegra210-xusb-padctl";
|
|
reg = <0x0 0x7009f000 0x0 0x1000>;
|
|
resets = <&tegra_car 142>;
|
|
reset-names = "padctl";
|
|
|
|
status = "disabled";
|
|
|
|
pads {
|
|
usb2 {
|
|
clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
|
|
clock-names = "trk";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
usb2-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2-1 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2-2 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2-3 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hsic {
|
|
clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
|
|
clock-names = "trk";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
hsic-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
hsic-1 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
|
|
clock-names = "pll";
|
|
resets = <&tegra_car 205>;
|
|
reset-names = "phy";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
pcie-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-1 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-2 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-3 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-4 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-5 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-6 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sata {
|
|
clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
|
|
clock-names = "pll";
|
|
resets = <&tegra_car 204>;
|
|
reset-names = "phy";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
sata-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ports {
|
|
usb2-0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2-1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2-2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2-3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
hsic-0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-3 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
sdhci@700b0000 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0000 0x0 0x200>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 14>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0200 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0200 0x0 0x200>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 9>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0400 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0400 0x0 0x200>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 69>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0600 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0600 0x0 0x200>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 15>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
mipi: mipi@700e3000 {
|
|
compatible = "nvidia,tegra210-mipi";
|
|
reg = <0x0 0x700e3000 0x0 0x100>;
|
|
clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
|
|
clock-names = "mipi-cal";
|
|
power-domains = <&pd_sor>;
|
|
#nvidia,mipi-calibrate-cells = <1>;
|
|
};
|
|
|
|
aconnect@702c0000 {
|
|
compatible = "nvidia,tegra210-aconnect";
|
|
clocks = <&tegra_car TEGRA210_CLK_APE>,
|
|
<&tegra_car TEGRA210_CLK_APB2APE>;
|
|
clock-names = "ape", "apb2ape";
|
|
power-domains = <&pd_audio>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
|
|
status = "disabled";
|
|
|
|
adma: dma@702e2000 {
|
|
compatible = "nvidia,tegra210-adma";
|
|
reg = <0x702e2000 0x2000>;
|
|
interrupt-parent = <&agic>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
|
|
clock-names = "d_audio";
|
|
status = "disabled";
|
|
};
|
|
|
|
agic: agic@702f9000 {
|
|
compatible = "nvidia,tegra210-agic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x702f9000 0x2000>,
|
|
<0x702fa000 0x2000>;
|
|
interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clocks = <&tegra_car TEGRA210_CLK_APE>;
|
|
clock-names = "clk";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi@70410000 {
|
|
compatible = "nvidia,tegra210-qspi";
|
|
reg = <0x0 0x70410000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_QSPI>;
|
|
clock-names = "qspi";
|
|
resets = <&tegra_car 211>;
|
|
reset-names = "qspi";
|
|
dmas = <&apbdma 5>, <&apbdma 5>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@7d000000 {
|
|
compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
|
|
reg = <0x0 0x7d000000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USBD>;
|
|
clock-names = "usb";
|
|
resets = <&tegra_car 22>;
|
|
reset-names = "usb";
|
|
nvidia,phy = <&phy1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
phy1: usb-phy@7d000000 {
|
|
compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
|
|
reg = <0x0 0x7d000000 0x0 0x4000>,
|
|
<0x0 0x7d000000 0x0 0x4000>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USBD>,
|
|
<&tegra_car TEGRA210_CLK_PLL_U>,
|
|
<&tegra_car TEGRA210_CLK_USBD>;
|
|
clock-names = "reg", "pll_u", "utmi-pads";
|
|
resets = <&tegra_car 22>, <&tegra_car 22>;
|
|
reset-names = "usb", "utmi-pads";
|
|
nvidia,hssync-start-delay = <0>;
|
|
nvidia,idle-wait-delay = <17>;
|
|
nvidia,elastic-limit = <16>;
|
|
nvidia,term-range-adj = <6>;
|
|
nvidia,xcvr-setup = <9>;
|
|
nvidia,xcvr-lsfslew = <0>;
|
|
nvidia,xcvr-lsrslew = <3>;
|
|
nvidia,hssquelch-level = <2>;
|
|
nvidia,hsdiscon-level = <5>;
|
|
nvidia,xcvr-hsslew = <12>;
|
|
nvidia,has-utmi-pad-registers;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@7d004000 {
|
|
compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
|
|
reg = <0x0 0x7d004000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USB2>;
|
|
clock-names = "usb";
|
|
resets = <&tegra_car 58>;
|
|
reset-names = "usb";
|
|
nvidia,phy = <&phy2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
phy2: usb-phy@7d004000 {
|
|
compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
|
|
reg = <0x0 0x7d004000 0x0 0x4000>,
|
|
<0x0 0x7d000000 0x0 0x4000>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USB2>,
|
|
<&tegra_car TEGRA210_CLK_PLL_U>,
|
|
<&tegra_car TEGRA210_CLK_USBD>;
|
|
clock-names = "reg", "pll_u", "utmi-pads";
|
|
resets = <&tegra_car 58>, <&tegra_car 22>;
|
|
reset-names = "usb", "utmi-pads";
|
|
nvidia,hssync-start-delay = <0>;
|
|
nvidia,idle-wait-delay = <17>;
|
|
nvidia,elastic-limit = <16>;
|
|
nvidia,term-range-adj = <6>;
|
|
nvidia,xcvr-setup = <9>;
|
|
nvidia,xcvr-lsfslew = <0>;
|
|
nvidia,xcvr-lsrslew = <3>;
|
|
nvidia,hssquelch-level = <2>;
|
|
nvidia,hsdiscon-level = <5>;
|
|
nvidia,xcvr-hsslew = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <1>;
|
|
};
|
|
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <2>;
|
|
};
|
|
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <3>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
soctherm: thermal-sensor@700e2000 {
|
|
compatible = "nvidia,tegra210-soctherm";
|
|
reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
|
|
0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
|
|
reg-names = "soctherm-reg", "car-reg";
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
|
|
<&tegra_car TEGRA210_CLK_SOC_THERM>;
|
|
clock-names = "tsensor", "soctherm";
|
|
resets = <&tegra_car 78>;
|
|
reset-names = "soctherm";
|
|
#thermal-sensor-cells = <1>;
|
|
|
|
throttle-cfgs {
|
|
throttle_heavy: heavy {
|
|
nvidia,priority = <100>;
|
|
nvidia,cpu-throt-percent = <85>;
|
|
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
|
|
|
|
trips {
|
|
cpu-shutdown-trip {
|
|
temperature = <102500>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
|
|
cpu_throttle_trip: throttle-trip {
|
|
temperature = <98500>;
|
|
hysteresis = <1000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_throttle_trip>;
|
|
cooling-device = <&throttle_heavy 1 1>;
|
|
};
|
|
};
|
|
};
|
|
mem {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
|
|
|
|
trips {
|
|
mem-shutdown-trip {
|
|
temperature = <103000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
/*
|
|
* There are currently no cooling maps,
|
|
* because there are no cooling devices.
|
|
*/
|
|
};
|
|
};
|
|
gpu {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
|
|
|
|
trips {
|
|
gpu-shutdown-trip {
|
|
temperature = <103000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
|
|
gpu_throttle_trip: throttle-trip {
|
|
temperature = <100000>;
|
|
hysteresis = <1000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&gpu_throttle_trip>;
|
|
cooling-device = <&throttle_heavy 1 1>;
|
|
};
|
|
};
|
|
};
|
|
pllx {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
|
|
|
|
trips {
|
|
pllx-shutdown-trip {
|
|
temperature = <103000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
/*
|
|
* There are currently no cooling maps,
|
|
* because there are no cooling devices.
|
|
*/
|
|
};
|
|
};
|
|
};
|
|
};
|