linux_dsm_epyc7002/drivers/net
Karicheri, Muralidharan 736532a070 net: netcp: move netcp_register_interface() to after attach module
The netcp interface is not fully initialized before attach the module
to the interface. For example, the tx pipe/rx pipe is initialized
in ethss module as part of attach(). So until this is complete, the
interface can't be registered.  So move registration of interface to
net device outside the current loop that attaches the modules to the
interface.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23 14:37:36 -07:00
..
appletalk
arcnet ARCNET: fix hard_header_len limit 2015-09-17 22:26:55 -07:00
bonding Changes for 4.3 2015-09-09 08:33:31 -07:00
caif net: caif: convert to using IFF_NO_QUEUE 2015-08-18 11:55:07 -07:00
can Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-08-27 21:45:31 -07:00
cris
dsa net: dsa: actually force the speed on the CPU port 2015-09-22 17:18:24 -07:00
ethernet net: netcp: move netcp_register_interface() to after attach module 2015-09-23 14:37:36 -07:00
fddi net/fddi: remove HWM_REVERSE() macro 2015-08-13 21:12:17 -07:00
fjes fjes: fix off-by-one error at fjes_hw_update_zone_task() 2015-09-17 22:34:09 -07:00
hamradio Merge branch 'x86/urgent' into x86/asm to fix up conflicts and to pick up fixes 2015-08-18 09:39:47 +02:00
hippi
hyperv flow_dissector: Add flags argument to skb_flow_dissector functions 2015-09-01 15:06:22 -07:00
ieee802154 cc2520: set the default fifo pin value from platform data 2015-08-11 06:13:39 +02:00
ipvlan net: ipvlan: convert to using IFF_NO_QUEUE 2015-08-18 11:55:06 -07:00
irda irda: ali-ircc: Fix deadlock in ali_ircc_sir_change_speed() 2015-09-11 16:18:33 -07:00
phy net: phy: mdio-gpio: Fix module autoload for OF platform driver 2015-09-21 16:11:20 -07:00
plip
ppp ppp: implement x-netns support 2015-08-25 14:11:20 -07:00
slip
team net: team: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
usb ch9200: Convert to use module_usb_driver 2015-09-22 17:34:57 -07:00
vmxnet3
wan net: wan: sbni: fix device usage count 2015-09-05 17:32:53 -07:00
wimax
wireless drivers/net/wireless/ath/wil6210: use seq_hex_dump() to dump buffers 2015-09-10 13:29:01 -07:00
xen-netback xen: MFN/GFN/BFN terminology changes for 4.3-rc0 2015-09-10 16:21:11 -07:00
dummy.c net: dummy: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
eql.c
geneve.c geneve: ensure ECN info is handled properly in all tx/rx paths 2015-09-22 16:49:56 -07:00
ifb.c
Kconfig geneve: Consolidate Geneve functionality in single module. 2015-08-27 15:42:48 -07:00
LICENSE.SRC
loopback.c net: loopback: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
macvlan.c macvlan: Don't segment multiple tagged packets on macvlan device 2015-08-03 14:24:49 -07:00
macvtap.c macvtap: fix TUNSETSNDBUF values > 64k 2015-09-20 22:44:39 -07:00
Makefile fjes: Introduce FUJITSU Extended Socket Network Device driver 2015-08-24 14:06:33 -07:00
mdio.c
mii.c
netconsole.c
nlmon.c net: nlmon: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
ntb_netdev.c NTB: ntb_netdev not covering all receive errors 2015-08-09 16:32:21 -04:00
rionet.c bus: subsys: update return type of ->remove_dev() to void 2015-08-05 17:08:14 -07:00
sb1000.c
Space.c
sungem_phy.c
tun.c tuntap: Don't segment multiple tagged packets on tap device 2015-08-03 14:24:50 -07:00
veth.c net: veth: enable noqueue operation by default 2015-08-18 11:55:04 -07:00
virtio_net.c virtio-net: avoid unnecessary sg initialzation 2015-08-27 15:51:45 -07:00
vrf.c net: Fix vti use case with oif in dst lookups 2015-09-17 16:36:34 -07:00
vxlan.c vxlan: reject IPv6 addresses if IPv6 is not configured 2015-09-17 22:32:15 -07:00
xen-netfront.c xen: MFN/GFN/BFN terminology changes for 4.3-rc0 2015-09-10 16:21:11 -07:00