mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
c8abbd6f9d
The aurora cache on the Marvell Armada-XP SoC supports ECC protection for the L2 data arrays. Add a "marvell,ecc-enable" device tree property which can be used to enable this. [jlu@pengutronix.de: use aurora specific define AURORA_ACR_ECC_EN] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
1818 lines
49 KiB
C
1818 lines
49 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* arch/arm/mm/cache-l2x0.c - L210/L220/L310 cache controller support
|
|
*
|
|
* Copyright (C) 2007 ARM Limited
|
|
*/
|
|
#include <linux/cpu.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/cp15.h>
|
|
#include <asm/cputype.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <asm/hardware/cache-aurora-l2.h>
|
|
#include "cache-tauros3.h"
|
|
|
|
struct l2c_init_data {
|
|
const char *type;
|
|
unsigned way_size_0;
|
|
unsigned num_lock;
|
|
void (*of_parse)(const struct device_node *, u32 *, u32 *);
|
|
void (*enable)(void __iomem *, unsigned);
|
|
void (*fixup)(void __iomem *, u32, struct outer_cache_fns *);
|
|
void (*save)(void __iomem *);
|
|
void (*configure)(void __iomem *);
|
|
void (*unlock)(void __iomem *, unsigned);
|
|
struct outer_cache_fns outer_cache;
|
|
};
|
|
|
|
#define CACHE_LINE_SIZE 32
|
|
|
|
static void __iomem *l2x0_base;
|
|
static const struct l2c_init_data *l2x0_data;
|
|
static DEFINE_RAW_SPINLOCK(l2x0_lock);
|
|
static u32 l2x0_way_mask; /* Bitmask of active ways */
|
|
static u32 l2x0_size;
|
|
static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
|
|
|
|
struct l2x0_regs l2x0_saved_regs;
|
|
|
|
static bool l2x0_bresp_disable;
|
|
static bool l2x0_flz_disable;
|
|
|
|
/*
|
|
* Common code for all cache controllers.
|
|
*/
|
|
static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask)
|
|
{
|
|
/* wait for cache operation by line or way to complete */
|
|
while (readl_relaxed(reg) & mask)
|
|
cpu_relax();
|
|
}
|
|
|
|
/*
|
|
* By default, we write directly to secure registers. Platforms must
|
|
* override this if they are running non-secure.
|
|
*/
|
|
static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg)
|
|
{
|
|
if (val == readl_relaxed(base + reg))
|
|
return;
|
|
if (outer_cache.write_sec)
|
|
outer_cache.write_sec(val, reg);
|
|
else
|
|
writel_relaxed(val, base + reg);
|
|
}
|
|
|
|
/*
|
|
* This should only be called when we have a requirement that the
|
|
* register be written due to a work-around, as platforms running
|
|
* in non-secure mode may not be able to access this register.
|
|
*/
|
|
static inline void l2c_set_debug(void __iomem *base, unsigned long val)
|
|
{
|
|
l2c_write_sec(val, base, L2X0_DEBUG_CTRL);
|
|
}
|
|
|
|
static void __l2c_op_way(void __iomem *reg)
|
|
{
|
|
writel_relaxed(l2x0_way_mask, reg);
|
|
l2c_wait_mask(reg, l2x0_way_mask);
|
|
}
|
|
|
|
static inline void l2c_unlock(void __iomem *base, unsigned num)
|
|
{
|
|
unsigned i;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE +
|
|
i * L2X0_LOCKDOWN_STRIDE);
|
|
writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE +
|
|
i * L2X0_LOCKDOWN_STRIDE);
|
|
}
|
|
}
|
|
|
|
static void l2c_configure(void __iomem *base)
|
|
{
|
|
l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL);
|
|
}
|
|
|
|
/*
|
|
* Enable the L2 cache controller. This function must only be
|
|
* called when the cache controller is known to be disabled.
|
|
*/
|
|
static void l2c_enable(void __iomem *base, unsigned num_lock)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (outer_cache.configure)
|
|
outer_cache.configure(&l2x0_saved_regs);
|
|
else
|
|
l2x0_data->configure(base);
|
|
|
|
l2x0_data->unlock(base, num_lock);
|
|
|
|
local_irq_save(flags);
|
|
__l2c_op_way(base + L2X0_INV_WAY);
|
|
writel_relaxed(0, base + sync_reg_offset);
|
|
l2c_wait_mask(base + sync_reg_offset, 1);
|
|
local_irq_restore(flags);
|
|
|
|
l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL);
|
|
}
|
|
|
|
static void l2c_disable(void)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
l2x0_pmu_suspend();
|
|
|
|
outer_cache.flush_all();
|
|
l2c_write_sec(0, base, L2X0_CTRL);
|
|
dsb(st);
|
|
}
|
|
|
|
static void l2c_save(void __iomem *base)
|
|
{
|
|
l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
|
|
}
|
|
|
|
static void l2c_resume(void)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
/* Do not touch the controller if already enabled. */
|
|
if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
|
|
l2c_enable(base, l2x0_data->num_lock);
|
|
|
|
l2x0_pmu_resume();
|
|
}
|
|
|
|
/*
|
|
* L2C-210 specific code.
|
|
*
|
|
* The L2C-2x0 PA, set/way and sync operations are atomic, but we must
|
|
* ensure that no background operation is running. The way operations
|
|
* are all background tasks.
|
|
*
|
|
* While a background operation is in progress, any new operation is
|
|
* ignored (unspecified whether this causes an error.) Thankfully, not
|
|
* used on SMP.
|
|
*
|
|
* Never has a different sync register other than L2X0_CACHE_SYNC, but
|
|
* we use sync_reg_offset here so we can share some of this with L2C-310.
|
|
*/
|
|
static void __l2c210_cache_sync(void __iomem *base)
|
|
{
|
|
writel_relaxed(0, base + sync_reg_offset);
|
|
}
|
|
|
|
static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start,
|
|
unsigned long end)
|
|
{
|
|
while (start < end) {
|
|
writel_relaxed(start, reg);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
}
|
|
|
|
static void l2c210_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
if (start & (CACHE_LINE_SIZE - 1)) {
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
|
|
if (end & (CACHE_LINE_SIZE - 1)) {
|
|
end &= ~(CACHE_LINE_SIZE - 1);
|
|
writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
|
|
}
|
|
|
|
__l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
|
|
__l2c210_cache_sync(base);
|
|
}
|
|
|
|
static void l2c210_clean_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
__l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end);
|
|
__l2c210_cache_sync(base);
|
|
}
|
|
|
|
static void l2c210_flush_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
__l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end);
|
|
__l2c210_cache_sync(base);
|
|
}
|
|
|
|
static void l2c210_flush_all(void)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
BUG_ON(!irqs_disabled());
|
|
|
|
__l2c_op_way(base + L2X0_CLEAN_INV_WAY);
|
|
__l2c210_cache_sync(base);
|
|
}
|
|
|
|
static void l2c210_sync(void)
|
|
{
|
|
__l2c210_cache_sync(l2x0_base);
|
|
}
|
|
|
|
static const struct l2c_init_data l2c210_data __initconst = {
|
|
.type = "L2C-210",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 1,
|
|
.enable = l2c_enable,
|
|
.save = l2c_save,
|
|
.configure = l2c_configure,
|
|
.unlock = l2c_unlock,
|
|
.outer_cache = {
|
|
.inv_range = l2c210_inv_range,
|
|
.clean_range = l2c210_clean_range,
|
|
.flush_range = l2c210_flush_range,
|
|
.flush_all = l2c210_flush_all,
|
|
.disable = l2c_disable,
|
|
.sync = l2c210_sync,
|
|
.resume = l2c_resume,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* L2C-220 specific code.
|
|
*
|
|
* All operations are background operations: they have to be waited for.
|
|
* Conflicting requests generate a slave error (which will cause an
|
|
* imprecise abort.) Never uses sync_reg_offset, so we hard-code the
|
|
* sync register here.
|
|
*
|
|
* However, we can re-use the l2c210_resume call.
|
|
*/
|
|
static inline void __l2c220_cache_sync(void __iomem *base)
|
|
{
|
|
writel_relaxed(0, base + L2X0_CACHE_SYNC);
|
|
l2c_wait_mask(base + L2X0_CACHE_SYNC, 1);
|
|
}
|
|
|
|
static void l2c220_op_way(void __iomem *base, unsigned reg)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
__l2c_op_way(base + reg);
|
|
__l2c220_cache_sync(base);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start,
|
|
unsigned long end, unsigned long flags)
|
|
{
|
|
raw_spinlock_t *lock = &l2x0_lock;
|
|
|
|
while (start < end) {
|
|
unsigned long blk_end = start + min(end - start, 4096UL);
|
|
|
|
while (start < blk_end) {
|
|
l2c_wait_mask(reg, 1);
|
|
writel_relaxed(start, reg);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
|
|
if (blk_end < end) {
|
|
raw_spin_unlock_irqrestore(lock, flags);
|
|
raw_spin_lock_irqsave(lock, flags);
|
|
}
|
|
}
|
|
|
|
return flags;
|
|
}
|
|
|
|
static void l2c220_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
if ((start | end) & (CACHE_LINE_SIZE - 1)) {
|
|
if (start & (CACHE_LINE_SIZE - 1)) {
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
|
|
if (end & (CACHE_LINE_SIZE - 1)) {
|
|
end &= ~(CACHE_LINE_SIZE - 1);
|
|
l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
|
|
writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
|
|
}
|
|
}
|
|
|
|
flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA,
|
|
start, end, flags);
|
|
l2c_wait_mask(base + L2X0_INV_LINE_PA, 1);
|
|
__l2c220_cache_sync(base);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2c220_clean_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
if ((end - start) >= l2x0_size) {
|
|
l2c220_op_way(base, L2X0_CLEAN_WAY);
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA,
|
|
start, end, flags);
|
|
l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
|
|
__l2c220_cache_sync(base);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2c220_flush_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
if ((end - start) >= l2x0_size) {
|
|
l2c220_op_way(base, L2X0_CLEAN_INV_WAY);
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA,
|
|
start, end, flags);
|
|
l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
|
|
__l2c220_cache_sync(base);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2c220_flush_all(void)
|
|
{
|
|
l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY);
|
|
}
|
|
|
|
static void l2c220_sync(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
__l2c220_cache_sync(l2x0_base);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2c220_enable(void __iomem *base, unsigned num_lock)
|
|
{
|
|
/*
|
|
* Always enable non-secure access to the lockdown registers -
|
|
* we write to them as part of the L2C enable sequence so they
|
|
* need to be accessible.
|
|
*/
|
|
l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN;
|
|
|
|
l2c_enable(base, num_lock);
|
|
}
|
|
|
|
static void l2c220_unlock(void __iomem *base, unsigned num_lock)
|
|
{
|
|
if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN)
|
|
l2c_unlock(base, num_lock);
|
|
}
|
|
|
|
static const struct l2c_init_data l2c220_data = {
|
|
.type = "L2C-220",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 1,
|
|
.enable = l2c220_enable,
|
|
.save = l2c_save,
|
|
.configure = l2c_configure,
|
|
.unlock = l2c220_unlock,
|
|
.outer_cache = {
|
|
.inv_range = l2c220_inv_range,
|
|
.clean_range = l2c220_clean_range,
|
|
.flush_range = l2c220_flush_range,
|
|
.flush_all = l2c220_flush_all,
|
|
.disable = l2c_disable,
|
|
.sync = l2c220_sync,
|
|
.resume = l2c_resume,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* L2C-310 specific code.
|
|
*
|
|
* Very similar to L2C-210, the PA, set/way and sync operations are atomic,
|
|
* and the way operations are all background tasks. However, issuing an
|
|
* operation while a background operation is in progress results in a
|
|
* SLVERR response. We can reuse:
|
|
*
|
|
* __l2c210_cache_sync (using sync_reg_offset)
|
|
* l2c210_sync
|
|
* l2c210_inv_range (if 588369 is not applicable)
|
|
* l2c210_clean_range
|
|
* l2c210_flush_range (if 588369 is not applicable)
|
|
* l2c210_flush_all (if 727915 is not applicable)
|
|
*
|
|
* Errata:
|
|
* 588369: PL310 R0P0->R1P0, fixed R2P0.
|
|
* Affects: all clean+invalidate operations
|
|
* clean and invalidate skips the invalidate step, so we need to issue
|
|
* separate operations. We also require the above debug workaround
|
|
* enclosing this code fragment on affected parts. On unaffected parts,
|
|
* we must not use this workaround without the debug register writes
|
|
* to avoid exposing a problem similar to 727915.
|
|
*
|
|
* 727915: PL310 R2P0->R3P0, fixed R3P1.
|
|
* Affects: clean+invalidate by way
|
|
* clean and invalidate by way runs in the background, and a store can
|
|
* hit the line between the clean operation and invalidate operation,
|
|
* resulting in the store being lost.
|
|
*
|
|
* 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2.
|
|
* Affects: 8x64-bit (double fill) line fetches
|
|
* double fill line fetches can fail to cause dirty data to be evicted
|
|
* from the cache before the new data overwrites the second line.
|
|
*
|
|
* 753970: PL310 R3P0, fixed R3P1.
|
|
* Affects: sync
|
|
* prevents merging writes after the sync operation, until another L2C
|
|
* operation is performed (or a number of other conditions.)
|
|
*
|
|
* 769419: PL310 R0P0->R3P1, fixed R3P2.
|
|
* Affects: store buffer
|
|
* store buffer is not automatically drained.
|
|
*/
|
|
static void l2c310_inv_range_erratum(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
if ((start | end) & (CACHE_LINE_SIZE - 1)) {
|
|
unsigned long flags;
|
|
|
|
/* Erratum 588369 for both clean+invalidate operations */
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
l2c_set_debug(base, 0x03);
|
|
|
|
if (start & (CACHE_LINE_SIZE - 1)) {
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
|
|
writel_relaxed(start, base + L2X0_INV_LINE_PA);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
|
|
if (end & (CACHE_LINE_SIZE - 1)) {
|
|
end &= ~(CACHE_LINE_SIZE - 1);
|
|
writel_relaxed(end, base + L2X0_CLEAN_LINE_PA);
|
|
writel_relaxed(end, base + L2X0_INV_LINE_PA);
|
|
}
|
|
|
|
l2c_set_debug(base, 0x00);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
__l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
|
|
__l2c210_cache_sync(base);
|
|
}
|
|
|
|
static void l2c310_flush_range_erratum(unsigned long start, unsigned long end)
|
|
{
|
|
raw_spinlock_t *lock = &l2x0_lock;
|
|
unsigned long flags;
|
|
void __iomem *base = l2x0_base;
|
|
|
|
raw_spin_lock_irqsave(lock, flags);
|
|
while (start < end) {
|
|
unsigned long blk_end = start + min(end - start, 4096UL);
|
|
|
|
l2c_set_debug(base, 0x03);
|
|
while (start < blk_end) {
|
|
writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
|
|
writel_relaxed(start, base + L2X0_INV_LINE_PA);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
l2c_set_debug(base, 0x00);
|
|
|
|
if (blk_end < end) {
|
|
raw_spin_unlock_irqrestore(lock, flags);
|
|
raw_spin_lock_irqsave(lock, flags);
|
|
}
|
|
}
|
|
raw_spin_unlock_irqrestore(lock, flags);
|
|
__l2c210_cache_sync(base);
|
|
}
|
|
|
|
static void l2c310_flush_all_erratum(void)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
l2c_set_debug(base, 0x03);
|
|
__l2c_op_way(base + L2X0_CLEAN_INV_WAY);
|
|
l2c_set_debug(base, 0x00);
|
|
__l2c210_cache_sync(base);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void __init l2c310_save(void __iomem *base)
|
|
{
|
|
unsigned revision;
|
|
|
|
l2c_save(base);
|
|
|
|
l2x0_saved_regs.tag_latency = readl_relaxed(base +
|
|
L310_TAG_LATENCY_CTRL);
|
|
l2x0_saved_regs.data_latency = readl_relaxed(base +
|
|
L310_DATA_LATENCY_CTRL);
|
|
l2x0_saved_regs.filter_end = readl_relaxed(base +
|
|
L310_ADDR_FILTER_END);
|
|
l2x0_saved_regs.filter_start = readl_relaxed(base +
|
|
L310_ADDR_FILTER_START);
|
|
|
|
revision = readl_relaxed(base + L2X0_CACHE_ID) &
|
|
L2X0_CACHE_ID_RTL_MASK;
|
|
|
|
/* From r2p0, there is Prefetch offset/control register */
|
|
if (revision >= L310_CACHE_ID_RTL_R2P0)
|
|
l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
|
|
L310_PREFETCH_CTRL);
|
|
|
|
/* From r3p0, there is Power control register */
|
|
if (revision >= L310_CACHE_ID_RTL_R3P0)
|
|
l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
|
|
L310_POWER_CTRL);
|
|
}
|
|
|
|
static void l2c310_configure(void __iomem *base)
|
|
{
|
|
unsigned revision;
|
|
|
|
l2c_configure(base);
|
|
|
|
/* restore pl310 setup */
|
|
l2c_write_sec(l2x0_saved_regs.tag_latency, base,
|
|
L310_TAG_LATENCY_CTRL);
|
|
l2c_write_sec(l2x0_saved_regs.data_latency, base,
|
|
L310_DATA_LATENCY_CTRL);
|
|
l2c_write_sec(l2x0_saved_regs.filter_end, base,
|
|
L310_ADDR_FILTER_END);
|
|
l2c_write_sec(l2x0_saved_regs.filter_start, base,
|
|
L310_ADDR_FILTER_START);
|
|
|
|
revision = readl_relaxed(base + L2X0_CACHE_ID) &
|
|
L2X0_CACHE_ID_RTL_MASK;
|
|
|
|
if (revision >= L310_CACHE_ID_RTL_R2P0)
|
|
l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base,
|
|
L310_PREFETCH_CTRL);
|
|
if (revision >= L310_CACHE_ID_RTL_R3P0)
|
|
l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base,
|
|
L310_POWER_CTRL);
|
|
}
|
|
|
|
static int l2c310_starting_cpu(unsigned int cpu)
|
|
{
|
|
set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
|
|
return 0;
|
|
}
|
|
|
|
static int l2c310_dying_cpu(unsigned int cpu)
|
|
{
|
|
set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
|
|
return 0;
|
|
}
|
|
|
|
static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
|
|
{
|
|
unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
|
|
bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9;
|
|
u32 aux = l2x0_saved_regs.aux_ctrl;
|
|
|
|
if (rev >= L310_CACHE_ID_RTL_R2P0) {
|
|
if (cortex_a9 && !l2x0_bresp_disable) {
|
|
aux |= L310_AUX_CTRL_EARLY_BRESP;
|
|
pr_info("L2C-310 enabling early BRESP for Cortex-A9\n");
|
|
} else if (aux & L310_AUX_CTRL_EARLY_BRESP) {
|
|
pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n");
|
|
aux &= ~L310_AUX_CTRL_EARLY_BRESP;
|
|
}
|
|
}
|
|
|
|
if (cortex_a9 && !l2x0_flz_disable) {
|
|
u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL);
|
|
u32 acr = get_auxcr();
|
|
|
|
pr_debug("Cortex-A9 ACR=0x%08x\n", acr);
|
|
|
|
if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO))
|
|
pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n");
|
|
|
|
if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3)))
|
|
pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n");
|
|
|
|
if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) {
|
|
aux |= L310_AUX_CTRL_FULL_LINE_ZERO;
|
|
pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n");
|
|
}
|
|
} else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) {
|
|
pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n");
|
|
aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP);
|
|
}
|
|
|
|
/*
|
|
* Always enable non-secure access to the lockdown registers -
|
|
* we write to them as part of the L2C enable sequence so they
|
|
* need to be accessible.
|
|
*/
|
|
l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN;
|
|
|
|
l2c_enable(base, num_lock);
|
|
|
|
/* Read back resulting AUX_CTRL value as it could have been altered. */
|
|
aux = readl_relaxed(base + L2X0_AUX_CTRL);
|
|
|
|
if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) {
|
|
u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL);
|
|
|
|
pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n",
|
|
aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "",
|
|
aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "",
|
|
1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK));
|
|
}
|
|
|
|
/* r3p0 or later has power control register */
|
|
if (rev >= L310_CACHE_ID_RTL_R3P0) {
|
|
u32 power_ctrl;
|
|
|
|
power_ctrl = readl_relaxed(base + L310_POWER_CTRL);
|
|
pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n",
|
|
power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis",
|
|
power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
|
|
}
|
|
|
|
if (aux & L310_AUX_CTRL_FULL_LINE_ZERO)
|
|
cpuhp_setup_state(CPUHP_AP_ARM_L2X0_STARTING,
|
|
"arm/l2x0:starting", l2c310_starting_cpu,
|
|
l2c310_dying_cpu);
|
|
}
|
|
|
|
static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
|
|
struct outer_cache_fns *fns)
|
|
{
|
|
unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK;
|
|
const char *errata[8];
|
|
unsigned n = 0;
|
|
|
|
if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) &&
|
|
revision < L310_CACHE_ID_RTL_R2P0 &&
|
|
/* For bcm compatibility */
|
|
fns->inv_range == l2c210_inv_range) {
|
|
fns->inv_range = l2c310_inv_range_erratum;
|
|
fns->flush_range = l2c310_flush_range_erratum;
|
|
errata[n++] = "588369";
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) &&
|
|
revision >= L310_CACHE_ID_RTL_R2P0 &&
|
|
revision < L310_CACHE_ID_RTL_R3P1) {
|
|
fns->flush_all = l2c310_flush_all_erratum;
|
|
errata[n++] = "727915";
|
|
}
|
|
|
|
if (revision >= L310_CACHE_ID_RTL_R3P0 &&
|
|
revision < L310_CACHE_ID_RTL_R3P2) {
|
|
u32 val = l2x0_saved_regs.prefetch_ctrl;
|
|
if (val & L310_PREFETCH_CTRL_DBL_LINEFILL) {
|
|
val &= ~L310_PREFETCH_CTRL_DBL_LINEFILL;
|
|
l2x0_saved_regs.prefetch_ctrl = val;
|
|
errata[n++] = "752271";
|
|
}
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) &&
|
|
revision == L310_CACHE_ID_RTL_R3P0) {
|
|
sync_reg_offset = L2X0_DUMMY_REG;
|
|
errata[n++] = "753970";
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_PL310_ERRATA_769419))
|
|
errata[n++] = "769419";
|
|
|
|
if (n) {
|
|
unsigned i;
|
|
|
|
pr_info("L2C-310 errat%s", n > 1 ? "a" : "um");
|
|
for (i = 0; i < n; i++)
|
|
pr_cont(" %s", errata[i]);
|
|
pr_cont(" enabled\n");
|
|
}
|
|
}
|
|
|
|
static void l2c310_disable(void)
|
|
{
|
|
/*
|
|
* If full-line-of-zeros is enabled, we must first disable it in the
|
|
* Cortex-A9 auxiliary control register before disabling the L2 cache.
|
|
*/
|
|
if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
|
|
set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
|
|
|
|
l2c_disable();
|
|
}
|
|
|
|
static void l2c310_resume(void)
|
|
{
|
|
l2c_resume();
|
|
|
|
/* Re-enable full-line-of-zeros for Cortex-A9 */
|
|
if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
|
|
set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
|
|
}
|
|
|
|
static void l2c310_unlock(void __iomem *base, unsigned num_lock)
|
|
{
|
|
if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN)
|
|
l2c_unlock(base, num_lock);
|
|
}
|
|
|
|
static const struct l2c_init_data l2c310_init_fns __initconst = {
|
|
.type = "L2C-310",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 8,
|
|
.enable = l2c310_enable,
|
|
.fixup = l2c310_fixup,
|
|
.save = l2c310_save,
|
|
.configure = l2c310_configure,
|
|
.unlock = l2c310_unlock,
|
|
.outer_cache = {
|
|
.inv_range = l2c210_inv_range,
|
|
.clean_range = l2c210_clean_range,
|
|
.flush_range = l2c210_flush_range,
|
|
.flush_all = l2c210_flush_all,
|
|
.disable = l2c310_disable,
|
|
.sync = l2c210_sync,
|
|
.resume = l2c310_resume,
|
|
},
|
|
};
|
|
|
|
static int __init __l2c_init(const struct l2c_init_data *data,
|
|
u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync)
|
|
{
|
|
struct outer_cache_fns fns;
|
|
unsigned way_size_bits, ways;
|
|
u32 aux, old_aux;
|
|
|
|
/*
|
|
* Save the pointer globally so that callbacks which do not receive
|
|
* context from callers can access the structure.
|
|
*/
|
|
l2x0_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
|
|
if (!l2x0_data)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Sanity check the aux values. aux_mask is the bits we preserve
|
|
* from reading the hardware register, and aux_val is the bits we
|
|
* set.
|
|
*/
|
|
if (aux_val & aux_mask)
|
|
pr_alert("L2C: platform provided aux values permit register corruption.\n");
|
|
|
|
old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
|
|
aux &= aux_mask;
|
|
aux |= aux_val;
|
|
|
|
if (old_aux != aux)
|
|
pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n",
|
|
old_aux, aux);
|
|
|
|
/* Determine the number of ways */
|
|
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
|
|
case L2X0_CACHE_ID_PART_L310:
|
|
if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16))
|
|
pr_warn("L2C: DT/platform tries to modify or specify cache size\n");
|
|
if (aux & (1 << 16))
|
|
ways = 16;
|
|
else
|
|
ways = 8;
|
|
break;
|
|
|
|
case L2X0_CACHE_ID_PART_L210:
|
|
case L2X0_CACHE_ID_PART_L220:
|
|
ways = (aux >> 13) & 0xf;
|
|
break;
|
|
|
|
case AURORA_CACHE_ID:
|
|
ways = (aux >> 13) & 0xf;
|
|
ways = 2 << ((ways + 1) >> 2);
|
|
break;
|
|
|
|
default:
|
|
/* Assume unknown chips have 8 ways */
|
|
ways = 8;
|
|
break;
|
|
}
|
|
|
|
l2x0_way_mask = (1 << ways) - 1;
|
|
|
|
/*
|
|
* way_size_0 is the size that a way_size value of zero would be
|
|
* given the calculation: way_size = way_size_0 << way_size_bits.
|
|
* So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k,
|
|
* then way_size_0 would be 8k.
|
|
*
|
|
* L2 cache size = number of ways * way size.
|
|
*/
|
|
way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >>
|
|
L2C_AUX_CTRL_WAY_SIZE_SHIFT;
|
|
l2x0_size = ways * (data->way_size_0 << way_size_bits);
|
|
|
|
fns = data->outer_cache;
|
|
fns.write_sec = outer_cache.write_sec;
|
|
fns.configure = outer_cache.configure;
|
|
if (data->fixup)
|
|
data->fixup(l2x0_base, cache_id, &fns);
|
|
if (nosync) {
|
|
pr_info("L2C: disabling outer sync\n");
|
|
fns.sync = NULL;
|
|
}
|
|
|
|
/*
|
|
* Check if l2x0 controller is already enabled. If we are booting
|
|
* in non-secure mode accessing the below registers will fault.
|
|
*/
|
|
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
|
|
l2x0_saved_regs.aux_ctrl = aux;
|
|
|
|
data->enable(l2x0_base, data->num_lock);
|
|
}
|
|
|
|
outer_cache = fns;
|
|
|
|
/*
|
|
* It is strange to save the register state before initialisation,
|
|
* but hey, this is what the DT implementations decided to do.
|
|
*/
|
|
if (data->save)
|
|
data->save(l2x0_base);
|
|
|
|
/* Re-read it in case some bits are reserved. */
|
|
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
|
|
|
|
pr_info("%s cache controller enabled, %d ways, %d kB\n",
|
|
data->type, ways, l2x0_size >> 10);
|
|
pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
|
|
data->type, cache_id, aux);
|
|
|
|
l2x0_pmu_register(l2x0_base, cache_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
|
|
{
|
|
const struct l2c_init_data *data;
|
|
u32 cache_id;
|
|
|
|
l2x0_base = base;
|
|
|
|
cache_id = readl_relaxed(base + L2X0_CACHE_ID);
|
|
|
|
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
|
|
default:
|
|
case L2X0_CACHE_ID_PART_L210:
|
|
data = &l2c210_data;
|
|
break;
|
|
|
|
case L2X0_CACHE_ID_PART_L220:
|
|
data = &l2c220_data;
|
|
break;
|
|
|
|
case L2X0_CACHE_ID_PART_L310:
|
|
data = &l2c310_init_fns;
|
|
break;
|
|
}
|
|
|
|
/* Read back current (default) hardware configuration */
|
|
if (data->save)
|
|
data->save(l2x0_base);
|
|
|
|
__l2c_init(data, aux_val, aux_mask, cache_id, false);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int l2_wt_override;
|
|
|
|
/* Aurora don't have the cache ID register available, so we have to
|
|
* pass it though the device tree */
|
|
static u32 cache_id_part_number_from_dt;
|
|
|
|
/**
|
|
* l2x0_cache_size_of_parse() - read cache size parameters from DT
|
|
* @np: the device tree node for the l2 cache
|
|
* @aux_val: pointer to machine-supplied auxilary register value, to
|
|
* be augmented by the call (bits to be set to 1)
|
|
* @aux_mask: pointer to machine-supplied auxilary register mask, to
|
|
* be augmented by the call (bits to be set to 0)
|
|
* @associativity: variable to return the calculated associativity in
|
|
* @max_way_size: the maximum size in bytes for the cache ways
|
|
*/
|
|
static int __init l2x0_cache_size_of_parse(const struct device_node *np,
|
|
u32 *aux_val, u32 *aux_mask,
|
|
u32 *associativity,
|
|
u32 max_way_size)
|
|
{
|
|
u32 mask = 0, val = 0;
|
|
u32 cache_size = 0, sets = 0;
|
|
u32 way_size_bits = 1;
|
|
u32 way_size = 0;
|
|
u32 block_size = 0;
|
|
u32 line_size = 0;
|
|
|
|
of_property_read_u32(np, "cache-size", &cache_size);
|
|
of_property_read_u32(np, "cache-sets", &sets);
|
|
of_property_read_u32(np, "cache-block-size", &block_size);
|
|
of_property_read_u32(np, "cache-line-size", &line_size);
|
|
|
|
if (!cache_size || !sets)
|
|
return -ENODEV;
|
|
|
|
/* All these l2 caches have the same line = block size actually */
|
|
if (!line_size) {
|
|
if (block_size) {
|
|
/* If linesize is not given, it is equal to blocksize */
|
|
line_size = block_size;
|
|
} else {
|
|
/* Fall back to known size */
|
|
pr_warn("L2C OF: no cache block/line size given: "
|
|
"falling back to default size %d bytes\n",
|
|
CACHE_LINE_SIZE);
|
|
line_size = CACHE_LINE_SIZE;
|
|
}
|
|
}
|
|
|
|
if (line_size != CACHE_LINE_SIZE)
|
|
pr_warn("L2C OF: DT supplied line size %d bytes does "
|
|
"not match hardware line size of %d bytes\n",
|
|
line_size,
|
|
CACHE_LINE_SIZE);
|
|
|
|
/*
|
|
* Since:
|
|
* set size = cache size / sets
|
|
* ways = cache size / (sets * line size)
|
|
* way size = cache size / (cache size / (sets * line size))
|
|
* way size = sets * line size
|
|
* associativity = ways = cache size / way size
|
|
*/
|
|
way_size = sets * line_size;
|
|
*associativity = cache_size / way_size;
|
|
|
|
if (way_size > max_way_size) {
|
|
pr_err("L2C OF: set size %dKB is too large\n", way_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_info("L2C OF: override cache size: %d bytes (%dKB)\n",
|
|
cache_size, cache_size >> 10);
|
|
pr_info("L2C OF: override line size: %d bytes\n", line_size);
|
|
pr_info("L2C OF: override way size: %d bytes (%dKB)\n",
|
|
way_size, way_size >> 10);
|
|
pr_info("L2C OF: override associativity: %d\n", *associativity);
|
|
|
|
/*
|
|
* Calculates the bits 17:19 to set for way size:
|
|
* 512KB -> 6, 256KB -> 5, ... 16KB -> 1
|
|
*/
|
|
way_size_bits = ilog2(way_size >> 10) - 3;
|
|
if (way_size_bits < 1 || way_size_bits > 6) {
|
|
pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",
|
|
way_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
|
|
val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT);
|
|
|
|
*aux_val &= ~mask;
|
|
*aux_val |= val;
|
|
*aux_mask &= ~mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init l2x0_of_parse(const struct device_node *np,
|
|
u32 *aux_val, u32 *aux_mask)
|
|
{
|
|
u32 data[2] = { 0, 0 };
|
|
u32 tag = 0;
|
|
u32 dirty = 0;
|
|
u32 val = 0, mask = 0;
|
|
u32 assoc;
|
|
int ret;
|
|
|
|
of_property_read_u32(np, "arm,tag-latency", &tag);
|
|
if (tag) {
|
|
mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
|
|
val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
|
|
}
|
|
|
|
of_property_read_u32_array(np, "arm,data-latency",
|
|
data, ARRAY_SIZE(data));
|
|
if (data[0] && data[1]) {
|
|
mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
|
|
L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
|
|
val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
|
|
((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
|
|
}
|
|
|
|
of_property_read_u32(np, "arm,dirty-latency", &dirty);
|
|
if (dirty) {
|
|
mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
|
|
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "arm,parity-enable")) {
|
|
mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
|
|
val |= L2C_AUX_CTRL_PARITY_ENABLE;
|
|
} else if (of_property_read_bool(np, "arm,parity-disable")) {
|
|
mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "arm,shared-override")) {
|
|
mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
|
|
val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
|
|
}
|
|
|
|
ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
|
|
if (ret)
|
|
return;
|
|
|
|
if (assoc > 8) {
|
|
pr_err("l2x0 of: cache setting yield too high associativity\n");
|
|
pr_err("l2x0 of: %d calculated, max 8\n", assoc);
|
|
} else {
|
|
mask |= L2X0_AUX_CTRL_ASSOC_MASK;
|
|
val |= (assoc << L2X0_AUX_CTRL_ASSOC_SHIFT);
|
|
}
|
|
|
|
*aux_val &= ~mask;
|
|
*aux_val |= val;
|
|
*aux_mask &= ~mask;
|
|
}
|
|
|
|
static const struct l2c_init_data of_l2c210_data __initconst = {
|
|
.type = "L2C-210",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 1,
|
|
.of_parse = l2x0_of_parse,
|
|
.enable = l2c_enable,
|
|
.save = l2c_save,
|
|
.configure = l2c_configure,
|
|
.unlock = l2c_unlock,
|
|
.outer_cache = {
|
|
.inv_range = l2c210_inv_range,
|
|
.clean_range = l2c210_clean_range,
|
|
.flush_range = l2c210_flush_range,
|
|
.flush_all = l2c210_flush_all,
|
|
.disable = l2c_disable,
|
|
.sync = l2c210_sync,
|
|
.resume = l2c_resume,
|
|
},
|
|
};
|
|
|
|
static const struct l2c_init_data of_l2c220_data __initconst = {
|
|
.type = "L2C-220",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 1,
|
|
.of_parse = l2x0_of_parse,
|
|
.enable = l2c220_enable,
|
|
.save = l2c_save,
|
|
.configure = l2c_configure,
|
|
.unlock = l2c220_unlock,
|
|
.outer_cache = {
|
|
.inv_range = l2c220_inv_range,
|
|
.clean_range = l2c220_clean_range,
|
|
.flush_range = l2c220_flush_range,
|
|
.flush_all = l2c220_flush_all,
|
|
.disable = l2c_disable,
|
|
.sync = l2c220_sync,
|
|
.resume = l2c_resume,
|
|
},
|
|
};
|
|
|
|
static void __init l2c310_of_parse(const struct device_node *np,
|
|
u32 *aux_val, u32 *aux_mask)
|
|
{
|
|
u32 data[3] = { 0, 0, 0 };
|
|
u32 tag[3] = { 0, 0, 0 };
|
|
u32 filter[2] = { 0, 0 };
|
|
u32 assoc;
|
|
u32 prefetch;
|
|
u32 power;
|
|
u32 val;
|
|
int ret;
|
|
|
|
of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
|
|
if (tag[0] && tag[1] && tag[2])
|
|
l2x0_saved_regs.tag_latency =
|
|
L310_LATENCY_CTRL_RD(tag[0] - 1) |
|
|
L310_LATENCY_CTRL_WR(tag[1] - 1) |
|
|
L310_LATENCY_CTRL_SETUP(tag[2] - 1);
|
|
|
|
of_property_read_u32_array(np, "arm,data-latency",
|
|
data, ARRAY_SIZE(data));
|
|
if (data[0] && data[1] && data[2])
|
|
l2x0_saved_regs.data_latency =
|
|
L310_LATENCY_CTRL_RD(data[0] - 1) |
|
|
L310_LATENCY_CTRL_WR(data[1] - 1) |
|
|
L310_LATENCY_CTRL_SETUP(data[2] - 1);
|
|
|
|
of_property_read_u32_array(np, "arm,filter-ranges",
|
|
filter, ARRAY_SIZE(filter));
|
|
if (filter[1]) {
|
|
l2x0_saved_regs.filter_end =
|
|
ALIGN(filter[0] + filter[1], SZ_1M);
|
|
l2x0_saved_regs.filter_start = (filter[0] & ~(SZ_1M - 1))
|
|
| L310_ADDR_FILTER_EN;
|
|
}
|
|
|
|
ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
|
|
if (!ret) {
|
|
switch (assoc) {
|
|
case 16:
|
|
*aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
|
|
*aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16;
|
|
*aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
|
|
break;
|
|
case 8:
|
|
*aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
|
|
*aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
|
|
break;
|
|
default:
|
|
pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n",
|
|
assoc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (of_property_read_bool(np, "arm,shared-override")) {
|
|
*aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
|
|
*aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "arm,parity-enable")) {
|
|
*aux_val |= L2C_AUX_CTRL_PARITY_ENABLE;
|
|
*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
|
|
} else if (of_property_read_bool(np, "arm,parity-disable")) {
|
|
*aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE;
|
|
*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "arm,early-bresp-disable"))
|
|
l2x0_bresp_disable = true;
|
|
|
|
if (of_property_read_bool(np, "arm,full-line-zero-disable"))
|
|
l2x0_flz_disable = true;
|
|
|
|
prefetch = l2x0_saved_regs.prefetch_ctrl;
|
|
|
|
ret = of_property_read_u32(np, "arm,double-linefill", &val);
|
|
if (ret == 0) {
|
|
if (val)
|
|
prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL;
|
|
else
|
|
prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF arm,double-linefill property value is missing\n");
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "arm,double-linefill-incr", &val);
|
|
if (ret == 0) {
|
|
if (val)
|
|
prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_INCR;
|
|
else
|
|
prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_INCR;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n");
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "arm,double-linefill-wrap", &val);
|
|
if (ret == 0) {
|
|
if (!val)
|
|
prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP;
|
|
else
|
|
prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n");
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "arm,prefetch-drop", &val);
|
|
if (ret == 0) {
|
|
if (val)
|
|
prefetch |= L310_PREFETCH_CTRL_PREFETCH_DROP;
|
|
else
|
|
prefetch &= ~L310_PREFETCH_CTRL_PREFETCH_DROP;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n");
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "arm,prefetch-offset", &val);
|
|
if (ret == 0) {
|
|
prefetch &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
|
|
prefetch |= val & L310_PREFETCH_CTRL_OFFSET_MASK;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n");
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "prefetch-data", &val);
|
|
if (ret == 0) {
|
|
if (val)
|
|
prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
|
|
else
|
|
prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF prefetch-data property value is missing\n");
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "prefetch-instr", &val);
|
|
if (ret == 0) {
|
|
if (val)
|
|
prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
|
|
else
|
|
prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF prefetch-instr property value is missing\n");
|
|
}
|
|
|
|
l2x0_saved_regs.prefetch_ctrl = prefetch;
|
|
|
|
power = l2x0_saved_regs.pwr_ctrl |
|
|
L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN;
|
|
|
|
ret = of_property_read_u32(np, "arm,dynamic-clock-gating", &val);
|
|
if (!ret) {
|
|
if (!val)
|
|
power &= ~L310_DYNAMIC_CLK_GATING_EN;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n");
|
|
}
|
|
ret = of_property_read_u32(np, "arm,standby-mode", &val);
|
|
if (!ret) {
|
|
if (!val)
|
|
power &= ~L310_STNDBY_MODE_EN;
|
|
} else if (ret != -EINVAL) {
|
|
pr_err("L2C-310 OF standby-mode property value is missing or invalid\n");
|
|
}
|
|
|
|
l2x0_saved_regs.pwr_ctrl = power;
|
|
}
|
|
|
|
static const struct l2c_init_data of_l2c310_data __initconst = {
|
|
.type = "L2C-310",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 8,
|
|
.of_parse = l2c310_of_parse,
|
|
.enable = l2c310_enable,
|
|
.fixup = l2c310_fixup,
|
|
.save = l2c310_save,
|
|
.configure = l2c310_configure,
|
|
.unlock = l2c310_unlock,
|
|
.outer_cache = {
|
|
.inv_range = l2c210_inv_range,
|
|
.clean_range = l2c210_clean_range,
|
|
.flush_range = l2c210_flush_range,
|
|
.flush_all = l2c210_flush_all,
|
|
.disable = l2c310_disable,
|
|
.sync = l2c210_sync,
|
|
.resume = l2c310_resume,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* This is a variant of the of_l2c310_data with .sync set to
|
|
* NULL. Outer sync operations are not needed when the system is I/O
|
|
* coherent, and potentially harmful in certain situations (PCIe/PL310
|
|
* deadlock on Armada 375/38x due to hardware I/O coherency). The
|
|
* other operations are kept because they are infrequent (therefore do
|
|
* not cause the deadlock in practice) and needed for secondary CPU
|
|
* boot and other power management activities.
|
|
*/
|
|
static const struct l2c_init_data of_l2c310_coherent_data __initconst = {
|
|
.type = "L2C-310 Coherent",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 8,
|
|
.of_parse = l2c310_of_parse,
|
|
.enable = l2c310_enable,
|
|
.fixup = l2c310_fixup,
|
|
.save = l2c310_save,
|
|
.configure = l2c310_configure,
|
|
.unlock = l2c310_unlock,
|
|
.outer_cache = {
|
|
.inv_range = l2c210_inv_range,
|
|
.clean_range = l2c210_clean_range,
|
|
.flush_range = l2c210_flush_range,
|
|
.flush_all = l2c210_flush_all,
|
|
.disable = l2c310_disable,
|
|
.resume = l2c310_resume,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Note that the end addresses passed to Linux primitives are
|
|
* noninclusive, while the hardware cache range operations use
|
|
* inclusive start and end addresses.
|
|
*/
|
|
static unsigned long aurora_range_end(unsigned long start, unsigned long end)
|
|
{
|
|
/*
|
|
* Limit the number of cache lines processed at once,
|
|
* since cache range operations stall the CPU pipeline
|
|
* until completion.
|
|
*/
|
|
if (end > start + AURORA_MAX_RANGE_SIZE)
|
|
end = start + AURORA_MAX_RANGE_SIZE;
|
|
|
|
/*
|
|
* Cache range operations can't straddle a page boundary.
|
|
*/
|
|
if (end > PAGE_ALIGN(start+1))
|
|
end = PAGE_ALIGN(start+1);
|
|
|
|
return end;
|
|
}
|
|
|
|
static void aurora_pa_range(unsigned long start, unsigned long end,
|
|
unsigned long offset)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long range_end;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* round start and end adresses up to cache line size
|
|
*/
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
end = ALIGN(end, CACHE_LINE_SIZE);
|
|
|
|
/*
|
|
* perform operation on all full cache lines between 'start' and 'end'
|
|
*/
|
|
while (start < end) {
|
|
range_end = aurora_range_end(start, end);
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
writel_relaxed(start, base + AURORA_RANGE_BASE_ADDR_REG);
|
|
writel_relaxed(range_end - CACHE_LINE_SIZE, base + offset);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
|
|
writel_relaxed(0, base + AURORA_SYNC_REG);
|
|
start = range_end;
|
|
}
|
|
}
|
|
static void aurora_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
|
|
}
|
|
|
|
static void aurora_clean_range(unsigned long start, unsigned long end)
|
|
{
|
|
/*
|
|
* If L2 is forced to WT, the L2 will always be clean and we
|
|
* don't need to do anything here.
|
|
*/
|
|
if (!l2_wt_override)
|
|
aurora_pa_range(start, end, AURORA_CLEAN_RANGE_REG);
|
|
}
|
|
|
|
static void aurora_flush_range(unsigned long start, unsigned long end)
|
|
{
|
|
if (l2_wt_override)
|
|
aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
|
|
else
|
|
aurora_pa_range(start, end, AURORA_FLUSH_RANGE_REG);
|
|
}
|
|
|
|
static void aurora_flush_all(void)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
/* clean all ways */
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
__l2c_op_way(base + L2X0_CLEAN_INV_WAY);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
|
|
writel_relaxed(0, base + AURORA_SYNC_REG);
|
|
}
|
|
|
|
static void aurora_cache_sync(void)
|
|
{
|
|
writel_relaxed(0, l2x0_base + AURORA_SYNC_REG);
|
|
}
|
|
|
|
static void aurora_disable(void)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
__l2c_op_way(base + L2X0_CLEAN_INV_WAY);
|
|
writel_relaxed(0, base + AURORA_SYNC_REG);
|
|
l2c_write_sec(0, base, L2X0_CTRL);
|
|
dsb(st);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void aurora_save(void __iomem *base)
|
|
{
|
|
l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL);
|
|
l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL);
|
|
}
|
|
|
|
/*
|
|
* For Aurora cache in no outer mode, enable via the CP15 coprocessor
|
|
* broadcasting of cache commands to L2.
|
|
*/
|
|
static void __init aurora_enable_no_outer(void __iomem *base,
|
|
unsigned num_lock)
|
|
{
|
|
u32 u;
|
|
|
|
asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u));
|
|
u |= AURORA_CTRL_FW; /* Set the FW bit */
|
|
asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u));
|
|
|
|
isb();
|
|
|
|
l2c_enable(base, num_lock);
|
|
}
|
|
|
|
static void __init aurora_fixup(void __iomem *base, u32 cache_id,
|
|
struct outer_cache_fns *fns)
|
|
{
|
|
sync_reg_offset = AURORA_SYNC_REG;
|
|
}
|
|
|
|
static void __init aurora_of_parse(const struct device_node *np,
|
|
u32 *aux_val, u32 *aux_mask)
|
|
{
|
|
u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
|
|
u32 mask = AURORA_ACR_REPLACEMENT_MASK;
|
|
|
|
of_property_read_u32(np, "cache-id-part",
|
|
&cache_id_part_number_from_dt);
|
|
|
|
/* Determine and save the write policy */
|
|
l2_wt_override = of_property_read_bool(np, "wt-override");
|
|
|
|
if (l2_wt_override) {
|
|
val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
|
|
mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "marvell,ecc-enable")) {
|
|
mask |= AURORA_ACR_ECC_EN;
|
|
val |= AURORA_ACR_ECC_EN;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "arm,parity-enable")) {
|
|
mask |= AURORA_ACR_PARITY_EN;
|
|
val |= AURORA_ACR_PARITY_EN;
|
|
} else if (of_property_read_bool(np, "arm,parity-disable")) {
|
|
mask |= AURORA_ACR_PARITY_EN;
|
|
}
|
|
|
|
*aux_val &= ~mask;
|
|
*aux_val |= val;
|
|
*aux_mask &= ~mask;
|
|
}
|
|
|
|
static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
|
|
.type = "Aurora",
|
|
.way_size_0 = SZ_4K,
|
|
.num_lock = 4,
|
|
.of_parse = aurora_of_parse,
|
|
.enable = l2c_enable,
|
|
.fixup = aurora_fixup,
|
|
.save = aurora_save,
|
|
.configure = l2c_configure,
|
|
.unlock = l2c_unlock,
|
|
.outer_cache = {
|
|
.inv_range = aurora_inv_range,
|
|
.clean_range = aurora_clean_range,
|
|
.flush_range = aurora_flush_range,
|
|
.flush_all = aurora_flush_all,
|
|
.disable = aurora_disable,
|
|
.sync = aurora_cache_sync,
|
|
.resume = l2c_resume,
|
|
},
|
|
};
|
|
|
|
static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
|
|
.type = "Aurora",
|
|
.way_size_0 = SZ_4K,
|
|
.num_lock = 4,
|
|
.of_parse = aurora_of_parse,
|
|
.enable = aurora_enable_no_outer,
|
|
.fixup = aurora_fixup,
|
|
.save = aurora_save,
|
|
.configure = l2c_configure,
|
|
.unlock = l2c_unlock,
|
|
.outer_cache = {
|
|
.resume = l2c_resume,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* For certain Broadcom SoCs, depending on the address range, different offsets
|
|
* need to be added to the address before passing it to L2 for
|
|
* invalidation/clean/flush
|
|
*
|
|
* Section Address Range Offset EMI
|
|
* 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC
|
|
* 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS
|
|
* 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC
|
|
*
|
|
* When the start and end addresses have crossed two different sections, we
|
|
* need to break the L2 operation into two, each within its own section.
|
|
* For example, if we need to invalidate addresses starts at 0xBFFF0000 and
|
|
* ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
|
|
* 0xC0000000 - 0xC0001000
|
|
*
|
|
* Note 1:
|
|
* By breaking a single L2 operation into two, we may potentially suffer some
|
|
* performance hit, but keep in mind the cross section case is very rare
|
|
*
|
|
* Note 2:
|
|
* We do not need to handle the case when the start address is in
|
|
* Section 1 and the end address is in Section 3, since it is not a valid use
|
|
* case
|
|
*
|
|
* Note 3:
|
|
* Section 1 in practical terms can no longer be used on rev A2. Because of
|
|
* that the code does not need to handle section 1 at all.
|
|
*
|
|
*/
|
|
#define BCM_SYS_EMI_START_ADDR 0x40000000UL
|
|
#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL
|
|
|
|
#define BCM_SYS_EMI_OFFSET 0x40000000UL
|
|
#define BCM_VC_EMI_OFFSET 0x80000000UL
|
|
|
|
static inline int bcm_addr_is_sys_emi(unsigned long addr)
|
|
{
|
|
return (addr >= BCM_SYS_EMI_START_ADDR) &&
|
|
(addr < BCM_VC_EMI_SEC3_START_ADDR);
|
|
}
|
|
|
|
static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
|
|
{
|
|
if (bcm_addr_is_sys_emi(addr))
|
|
return addr + BCM_SYS_EMI_OFFSET;
|
|
else
|
|
return addr + BCM_VC_EMI_OFFSET;
|
|
}
|
|
|
|
static void bcm_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
unsigned long new_start, new_end;
|
|
|
|
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
|
|
|
|
if (unlikely(end <= start))
|
|
return;
|
|
|
|
new_start = bcm_l2_phys_addr(start);
|
|
new_end = bcm_l2_phys_addr(end);
|
|
|
|
/* normal case, no cross section between start and end */
|
|
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
|
|
l2c210_inv_range(new_start, new_end);
|
|
return;
|
|
}
|
|
|
|
/* They cross sections, so it can only be a cross from section
|
|
* 2 to section 3
|
|
*/
|
|
l2c210_inv_range(new_start,
|
|
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
|
|
l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
|
|
new_end);
|
|
}
|
|
|
|
static void bcm_clean_range(unsigned long start, unsigned long end)
|
|
{
|
|
unsigned long new_start, new_end;
|
|
|
|
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
|
|
|
|
if (unlikely(end <= start))
|
|
return;
|
|
|
|
new_start = bcm_l2_phys_addr(start);
|
|
new_end = bcm_l2_phys_addr(end);
|
|
|
|
/* normal case, no cross section between start and end */
|
|
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
|
|
l2c210_clean_range(new_start, new_end);
|
|
return;
|
|
}
|
|
|
|
/* They cross sections, so it can only be a cross from section
|
|
* 2 to section 3
|
|
*/
|
|
l2c210_clean_range(new_start,
|
|
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
|
|
l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
|
|
new_end);
|
|
}
|
|
|
|
static void bcm_flush_range(unsigned long start, unsigned long end)
|
|
{
|
|
unsigned long new_start, new_end;
|
|
|
|
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
|
|
|
|
if (unlikely(end <= start))
|
|
return;
|
|
|
|
if ((end - start) >= l2x0_size) {
|
|
outer_cache.flush_all();
|
|
return;
|
|
}
|
|
|
|
new_start = bcm_l2_phys_addr(start);
|
|
new_end = bcm_l2_phys_addr(end);
|
|
|
|
/* normal case, no cross section between start and end */
|
|
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
|
|
l2c210_flush_range(new_start, new_end);
|
|
return;
|
|
}
|
|
|
|
/* They cross sections, so it can only be a cross from section
|
|
* 2 to section 3
|
|
*/
|
|
l2c210_flush_range(new_start,
|
|
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
|
|
l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
|
|
new_end);
|
|
}
|
|
|
|
/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */
|
|
static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
|
|
.type = "BCM-L2C-310",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 8,
|
|
.of_parse = l2c310_of_parse,
|
|
.enable = l2c310_enable,
|
|
.save = l2c310_save,
|
|
.configure = l2c310_configure,
|
|
.unlock = l2c310_unlock,
|
|
.outer_cache = {
|
|
.inv_range = bcm_inv_range,
|
|
.clean_range = bcm_clean_range,
|
|
.flush_range = bcm_flush_range,
|
|
.flush_all = l2c210_flush_all,
|
|
.disable = l2c310_disable,
|
|
.sync = l2c210_sync,
|
|
.resume = l2c310_resume,
|
|
},
|
|
};
|
|
|
|
static void __init tauros3_save(void __iomem *base)
|
|
{
|
|
l2c_save(base);
|
|
|
|
l2x0_saved_regs.aux2_ctrl =
|
|
readl_relaxed(base + TAUROS3_AUX2_CTRL);
|
|
l2x0_saved_regs.prefetch_ctrl =
|
|
readl_relaxed(base + L310_PREFETCH_CTRL);
|
|
}
|
|
|
|
static void tauros3_configure(void __iomem *base)
|
|
{
|
|
l2c_configure(base);
|
|
writel_relaxed(l2x0_saved_regs.aux2_ctrl,
|
|
base + TAUROS3_AUX2_CTRL);
|
|
writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
|
|
base + L310_PREFETCH_CTRL);
|
|
}
|
|
|
|
static const struct l2c_init_data of_tauros3_data __initconst = {
|
|
.type = "Tauros3",
|
|
.way_size_0 = SZ_8K,
|
|
.num_lock = 8,
|
|
.enable = l2c_enable,
|
|
.save = tauros3_save,
|
|
.configure = tauros3_configure,
|
|
.unlock = l2c_unlock,
|
|
/* Tauros3 broadcasts L1 cache operations to L2 */
|
|
.outer_cache = {
|
|
.resume = l2c_resume,
|
|
},
|
|
};
|
|
|
|
#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns }
|
|
static const struct of_device_id l2x0_ids[] __initconst = {
|
|
L2C_ID("arm,l210-cache", of_l2c210_data),
|
|
L2C_ID("arm,l220-cache", of_l2c220_data),
|
|
L2C_ID("arm,pl310-cache", of_l2c310_data),
|
|
L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
|
|
L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data),
|
|
L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data),
|
|
L2C_ID("marvell,tauros3-cache", of_tauros3_data),
|
|
/* Deprecated IDs */
|
|
L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
|
|
{}
|
|
};
|
|
|
|
int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
|
|
{
|
|
const struct l2c_init_data *data;
|
|
struct device_node *np;
|
|
struct resource res;
|
|
u32 cache_id, old_aux;
|
|
u32 cache_level = 2;
|
|
bool nosync = false;
|
|
|
|
np = of_find_matching_node(NULL, l2x0_ids);
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
if (of_address_to_resource(np, 0, &res))
|
|
return -ENODEV;
|
|
|
|
l2x0_base = ioremap(res.start, resource_size(&res));
|
|
if (!l2x0_base)
|
|
return -ENOMEM;
|
|
|
|
l2x0_saved_regs.phy_base = res.start;
|
|
|
|
data = of_match_node(l2x0_ids, np)->data;
|
|
|
|
if (of_device_is_compatible(np, "arm,pl310-cache") &&
|
|
of_property_read_bool(np, "arm,io-coherent"))
|
|
data = &of_l2c310_coherent_data;
|
|
|
|
old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
|
|
if (old_aux != ((old_aux & aux_mask) | aux_val)) {
|
|
pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n",
|
|
old_aux, (old_aux & aux_mask) | aux_val);
|
|
} else if (aux_mask != ~0U && aux_val != 0) {
|
|
pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n");
|
|
}
|
|
|
|
/* All L2 caches are unified, so this property should be specified */
|
|
if (!of_property_read_bool(np, "cache-unified"))
|
|
pr_err("L2C: device tree omits to specify unified cache\n");
|
|
|
|
if (of_property_read_u32(np, "cache-level", &cache_level))
|
|
pr_err("L2C: device tree omits to specify cache-level\n");
|
|
|
|
if (cache_level != 2)
|
|
pr_err("L2C: device tree specifies invalid cache level\n");
|
|
|
|
nosync = of_property_read_bool(np, "arm,outer-sync-disable");
|
|
|
|
/* Read back current (default) hardware configuration */
|
|
if (data->save)
|
|
data->save(l2x0_base);
|
|
|
|
/* L2 configuration can only be changed if the cache is disabled */
|
|
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
|
|
if (data->of_parse)
|
|
data->of_parse(np, &aux_val, &aux_mask);
|
|
|
|
if (cache_id_part_number_from_dt)
|
|
cache_id = cache_id_part_number_from_dt;
|
|
else
|
|
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
|
|
|
|
return __l2c_init(data, aux_val, aux_mask, cache_id, nosync);
|
|
}
|
|
#endif
|