linux_dsm_epyc7002/arch/arm/mach-omap2/prm3xxx.c
Tony Lindgren b76c8b19b0 ARM: OMAP2+: Use omap initcalls
This way the initcalls don't run on other SoCs on multiplatform
kernels. Otherwise we'll get something like this when booting
on vexpress:

omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered
...
WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94()
_init_omap_device: could not find omap_hwmod for mpu
...
omap-dma-engine omap-dma-engine: OMAP DMA engine driver
...

Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:18 -08:00

442 lines
13 KiB
C

/*
* OMAP3xxx PRM module functions
*
* Copyright (C) 2010-2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include "soc.h"
#include "common.h"
#include "vp.h"
#include "powerdomain.h"
#include "prm3xxx.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
};
static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
.ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
.nr_regs = 1,
.irqs = omap3_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
.irq = 11 + OMAP_INTC_START,
.read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
.restore_irqen = &omap3xxx_prm_restore_irqen,
};
/*
* omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
* register (which are specific to OMAP3xxx SoCs) to reset source ID
* bit shifts (which is an OMAP SoC-independent enumeration)
*/
static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
{ OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
{ OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
{ OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
{ OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
{ OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
{ OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
{ OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
{ OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
{ OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
{ OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
{ -1, -1 },
};
/* PRM VP */
/*
* struct omap3_vp - OMAP3 VP register access description.
* @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
*/
struct omap3_vp {
u32 tranxdone_status;
};
static struct omap3_vp omap3_vp[] = {
[OMAP3_VP_VDD_MPU_ID] = {
.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
},
[OMAP3_VP_VDD_CORE_ID] = {
.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
},
};
#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
u32 omap3_prm_vp_check_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
u32 irqstatus;
irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
return irqstatus & vp->tranxdone_status;
}
void omap3_prm_vp_clear_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
omap2_prm_write_mod_reg(vp->tranxdone_status,
OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
}
u32 omap3_prm_vcvp_read(u8 offset)
{
return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
}
void omap3_prm_vcvp_write(u32 val, u8 offset)
{
omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
}
u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
{
return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
}
/**
* omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC
*
* Set the DPLL3 reset bit, which should reboot the SoC. This is the
* recommended way to restart the SoC, considering Errata i520. No
* return value.
*/
void omap3xxx_prm_dpll3_reset(void)
{
omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
OMAP2_RM_RSTCTRL);
/* OCP barrier */
omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL);
}
/**
* omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
* @events: ptr to a u32, preallocated by caller
*
* Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
* MPU IRQs, and store the result into the u32 pointed to by @events.
* No return value.
*/
void omap3xxx_prm_read_pending_irqs(unsigned long *events)
{
u32 mask, st;
/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
events[0] = mask & st;
}
/**
* omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
*
* Force any buffered writes to the PRM IP block to complete. Needed
* by the PRM IRQ handler, which reads and writes directly to the IP
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
void omap3xxx_prm_ocp_barrier(void)
{
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
* @saved_mask: ptr to a u32 array to save IRQENABLE bits
*
* Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
* must be allocated by the caller. Intended to be used in the PRM
* interrupt handler suspend callback. The OCP barrier is needed to
* ensure the write to disable PRM interrupts reaches the PRM before
* returning; otherwise, spurious interrupts might occur. No return
* value.
*/
void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* OCP barrier */
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
* @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
*
* Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
* to be used in the PRM interrupt handler resume callback to restore
* values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
* barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
void omap3xxx_prm_restore_irqen(u32 *saved_mask)
{
omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
}
/**
* omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
*
* Clear any previously-latched I/O wakeup events and ensure that the
* I/O wakeup gates are aligned with the current mux settings. Works
* by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
* deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
* return value.
*/
void omap3xxx_prm_reconfigure_io_chain(void)
{
int i = 0;
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
OMAP3430_ST_IO_CHAIN_MASK,
MAX_IOPAD_LATCH_TIME, i);
if (i == MAX_IOPAD_LATCH_TIME)
pr_warn("PRM: I/O chain clock line assertion timed out\n");
omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
PM_WKST);
omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
}
/**
* omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
*
* Activates the I/O wakeup event latches and allows events logged by
* those latches to signal a wakeup event to the PRCM. For I/O
* wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
* registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
* No return value.
*/
static void __init omap3xxx_prm_enable_io_wakeup(void)
{
if (omap3_has_io_wakeup())
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
PM_WKEN);
}
/**
* omap3xxx_prm_read_reset_sources - return the last SoC reset source
*
* Return a u32 representing the last reset sources of the SoC. The
* returned reset source bits are standardized across OMAP SoCs.
*/
static u32 omap3xxx_prm_read_reset_sources(void)
{
struct prm_reset_src_map *p;
u32 r = 0;
u32 v;
v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
p = omap3xxx_prm_reset_src_map;
while (p->reg_shift >= 0 && p->std_shift >= 0) {
if (v & (1 << p->reg_shift))
r |= 1 << p->std_shift;
p++;
}
return r;
}
/* Powerdomain low-level functions */
static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
return 0;
}
static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP_POWERSTATE_MASK);
}
static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP_POWERSTATEST_MASK);
}
/* Applicable only for OMAP3. Not supported on OMAP2 */
static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST,
OMAP3430_LASTPOWERSTATEENTERED_MASK);
}
static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP3430_LOGICSTATEST_MASK);
}
static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP3430_LOGICSTATEST_MASK);
}
static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST,
OMAP3430_LASTLOGICSTATEENTERED_MASK);
}
static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
{
switch (bank) {
case 0:
return OMAP3430_LASTMEM1STATEENTERED_MASK;
case 1:
return OMAP3430_LASTMEM2STATEENTERED_MASK;
case 2:
return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
case 3:
return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
return 0;
}
static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
m = omap3_get_mem_bank_lastmemst_mask(bank);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST, m);
}
static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
return 0;
}
static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
{
return omap2_prm_rmw_mod_reg_bits(0,
1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
}
static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
{
return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
0, pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
}
struct pwrdm_ops omap3_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap3_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap3_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap3_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
.pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
.pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
.pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
.pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
.pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
.pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
.pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
.pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
.pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
.pwrdm_wait_transition = omap2_pwrdm_wait_transition,
};
/*
*
*/
static struct prm_ll_data omap3xxx_prm_ll_data = {
.read_reset_sources = &omap3xxx_prm_read_reset_sources,
};
int __init omap3xxx_prm_init(void)
{
if (!cpu_is_omap34xx())
return 0;
return prm_register(&omap3xxx_prm_ll_data);
}
static int __init omap3xxx_prm_late_init(void)
{
int ret;
if (!cpu_is_omap34xx())
return 0;
omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
IRQ_NOAUTOEN);
return ret;
}
omap_subsys_initcall(omap3xxx_prm_late_init);
static void __exit omap3xxx_prm_exit(void)
{
if (!cpu_is_omap34xx())
return;
/* Should never happen */
WARN(prm_unregister(&omap3xxx_prm_ll_data),
"%s: prm_ll_data function pointer mismatch\n", __func__);
}
__exitcall(omap3xxx_prm_exit);