mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 13:36:45 +07:00
705e76beb9
Previously, post-softreset readiness is waited as follows. 1. ata_sff_wait_after_reset() waits for 150ms and then for ATA_TMOUT_FF_WAIT if status is 0xff and other conditions meet. 2. ata_bus_softreset() finishes with -ENODEV if status is still 0xff. If not, continue to #3. 3. ata_bus_post_reset() waits readiness of dev0 and/or dev1 depending on devmask using ata_sff_wait_ready(). And for post-hardreset readiness, 1. ata_sff_wait_after_reset() waits for 150ms and then for ATA_TMOUT_FF_WAIT if status is 0xff and other conditions meet. 2. sata_sff_hardreset waits for device readiness using ata_sff_wait_ready(). This patch merges and unifies post-reset readiness waits into ata_sff_wait_ready() and ata_sff_wait_after_reset(). ATA_TMOUT_FF_WAIT handling is merged into ata_sff_wait_ready(). If TF status is 0xff, link status is unknown and the port is SATA, it will continue polling till ATA_TMOUT_FF_WAIT. ata_sff_wait_after_reset() is updated to perform the following steps. 1. waits for 150ms. 2. waits for dev0 readiness using ata_sff_wait_ready(). Note that this is done regardless of devmask, as ata_sff_wait_ready() handles 0xff status correctly, this preserves the original behavior except that it may wait longer after softreset if link is online but status is 0xff. This behavior change is very unlikely to cause any actual difference and is intended. It brings softreset behavior to that of hardreset. 3. waits for dev1 readiness just the same way ata_bus_post_reset() did. Now both soft and hard resets call ata_sff_wait_after_reset() after reset to wait for readiness after resets. As ata_sff_wait_after_reset() contains calls to ->sff_dev_select(), explicit call near the end of sata_sff_hardreset() is removed. This change makes reset implementation simpler and more consistent. While at it, make the magical 150ms wait post-reset wait duration a constant and ata_sff_wait_ready() and ata_sff_wait_after_reset() take @link instead of @ap. This is to make them consistent with other reset helpers and ease core changes. pata_scc is updated accordingly. Signed-off-by: Tejun Heo <htejun@gmail.com>
467 lines
13 KiB
C
467 lines
13 KiB
C
/*
|
|
* sata_via.c - VIA Serial ATA controllers
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available under NDA.
|
|
*
|
|
*
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_via"
|
|
#define DRV_VERSION "2.3"
|
|
|
|
enum board_ids_enum {
|
|
vt6420,
|
|
vt6421,
|
|
};
|
|
|
|
enum {
|
|
SATA_CHAN_ENAB = 0x40, /* SATA channel enable */
|
|
SATA_INT_GATE = 0x41, /* SATA interrupt gating */
|
|
SATA_NATIVE_MODE = 0x42, /* Native mode enable */
|
|
PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */
|
|
PATA_PIO_TIMING = 0xAB, /* PATA timing register */
|
|
|
|
PORT0 = (1 << 1),
|
|
PORT1 = (1 << 0),
|
|
ALL_PORTS = PORT0 | PORT1,
|
|
|
|
NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
|
|
|
|
SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */
|
|
};
|
|
|
|
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
|
|
static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static void svia_noop_freeze(struct ata_port *ap);
|
|
static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
|
|
static int vt6421_pata_cable_detect(struct ata_port *ap);
|
|
static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
|
|
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
|
|
|
|
static const struct pci_device_id svia_pci_tbl[] = {
|
|
{ PCI_VDEVICE(VIA, 0x5337), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x0591), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x3149), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x3249), vt6421 },
|
|
{ PCI_VDEVICE(VIA, 0x5287), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x5372), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver svia_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = svia_pci_tbl,
|
|
.probe = svia_init_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static struct scsi_host_template svia_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations vt6420_sata_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.freeze = svia_noop_freeze,
|
|
.prereset = vt6420_prereset,
|
|
};
|
|
|
|
static struct ata_port_operations vt6421_pata_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.cable_detect = vt6421_pata_cable_detect,
|
|
.set_piomode = vt6421_set_pio_mode,
|
|
.set_dmamode = vt6421_set_dma_mode,
|
|
};
|
|
|
|
static struct ata_port_operations vt6421_sata_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.scr_read = svia_scr_read,
|
|
.scr_write = svia_scr_write,
|
|
};
|
|
|
|
static const struct ata_port_info vt6420_port_info = {
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &vt6420_sata_ops,
|
|
};
|
|
|
|
static struct ata_port_info vt6421_sport_info = {
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &vt6421_sata_ops,
|
|
};
|
|
|
|
static struct ata_port_info vt6421_pport_info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &vt6421_pata_ops,
|
|
};
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, svia_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
*val = ioread32(ap->ioaddr.scr_addr + (4 * sc_reg));
|
|
return 0;
|
|
}
|
|
|
|
static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
iowrite32(val, ap->ioaddr.scr_addr + (4 * sc_reg));
|
|
return 0;
|
|
}
|
|
|
|
static void svia_noop_freeze(struct ata_port *ap)
|
|
{
|
|
/* Some VIA controllers choke if ATA_NIEN is manipulated in
|
|
* certain way. Leave it alone and just clear pending IRQ.
|
|
*/
|
|
ap->ops->sff_check_status(ap);
|
|
ata_sff_irq_clear(ap);
|
|
}
|
|
|
|
/**
|
|
* vt6420_prereset - prereset for vt6420
|
|
* @link: target ATA link
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* SCR registers on vt6420 are pieces of shit and may hang the
|
|
* whole machine completely if accessed with the wrong timing.
|
|
* To avoid such catastrophe, vt6420 doesn't provide generic SCR
|
|
* access operations, but uses SStatus and SControl only during
|
|
* boot probing in controlled way.
|
|
*
|
|
* As the old (pre EH update) probing code is proven to work, we
|
|
* strictly follow the access pattern.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ata_eh_context *ehc = &ap->link.eh_context;
|
|
unsigned long timeout = jiffies + (HZ * 5);
|
|
u32 sstatus, scontrol;
|
|
int online;
|
|
|
|
/* don't do any SCR stuff if we're not loading */
|
|
if (!(ap->pflags & ATA_PFLAG_LOADING))
|
|
goto skip_scr;
|
|
|
|
/* Resume phy. This is the old SATA resume sequence */
|
|
svia_scr_write(ap, SCR_CONTROL, 0x300);
|
|
svia_scr_read(ap, SCR_CONTROL, &scontrol); /* flush */
|
|
|
|
/* wait for phy to become ready, if necessary */
|
|
do {
|
|
msleep(200);
|
|
svia_scr_read(ap, SCR_STATUS, &sstatus);
|
|
if ((sstatus & 0xf) != 1)
|
|
break;
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
/* open code sata_print_link_status() */
|
|
svia_scr_read(ap, SCR_STATUS, &sstatus);
|
|
svia_scr_read(ap, SCR_CONTROL, &scontrol);
|
|
|
|
online = (sstatus & 0xf) == 0x3;
|
|
|
|
ata_port_printk(ap, KERN_INFO,
|
|
"SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
|
|
online ? "up" : "down", sstatus, scontrol);
|
|
|
|
/* SStatus is read one more time */
|
|
svia_scr_read(ap, SCR_STATUS, &sstatus);
|
|
|
|
if (!online) {
|
|
/* tell EH to bail */
|
|
ehc->i.action &= ~ATA_EH_RESET;
|
|
return 0;
|
|
}
|
|
|
|
skip_scr:
|
|
/* wait for !BSY */
|
|
ata_sff_wait_ready(link, deadline);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vt6421_pata_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 tmp;
|
|
|
|
pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp);
|
|
if (tmp & 0x10)
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 };
|
|
pci_write_config_byte(pdev, PATA_PIO_TIMING, pio_bits[adev->pio_mode - XFER_PIO_0]);
|
|
}
|
|
|
|
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 };
|
|
pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]);
|
|
}
|
|
|
|
static const unsigned int svia_bar_sizes[] = {
|
|
8, 4, 8, 4, 16, 256
|
|
};
|
|
|
|
static const unsigned int vt6421_bar_sizes[] = {
|
|
16, 16, 16, 16, 32, 128
|
|
};
|
|
|
|
static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port)
|
|
{
|
|
return addr + (port * 128);
|
|
}
|
|
|
|
static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port)
|
|
{
|
|
return addr + (port * 64);
|
|
}
|
|
|
|
static void vt6421_init_addrs(struct ata_port *ap)
|
|
{
|
|
void __iomem * const * iomap = ap->host->iomap;
|
|
void __iomem *reg_addr = iomap[ap->port_no];
|
|
void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8);
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
ioaddr->cmd_addr = reg_addr;
|
|
ioaddr->altstatus_addr =
|
|
ioaddr->ctl_addr = (void __iomem *)
|
|
((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS);
|
|
ioaddr->bmdma_addr = bmdma_addr;
|
|
ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
|
|
|
|
ata_sff_std_ports(ioaddr);
|
|
|
|
ata_port_pbar_desc(ap, ap->port_no, -1, "port");
|
|
ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
|
|
}
|
|
|
|
static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
|
|
{
|
|
const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL };
|
|
struct ata_host *host;
|
|
int rc;
|
|
|
|
rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
|
|
if (rc)
|
|
return rc;
|
|
*r_host = host;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
|
|
return rc;
|
|
}
|
|
|
|
host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0);
|
|
host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
|
|
{
|
|
const struct ata_port_info *ppi[] =
|
|
{ &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info };
|
|
struct ata_host *host;
|
|
int i, rc;
|
|
|
|
*r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
|
|
if (!host) {
|
|
dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
|
|
"PCI BARs (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
for (i = 0; i < host->n_ports; i++)
|
|
vt6421_init_addrs(host->ports[i]);
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void svia_configure(struct pci_dev *pdev)
|
|
{
|
|
u8 tmp8;
|
|
|
|
pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
|
|
dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
|
|
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
|
|
|
|
/* make sure SATA channels are enabled */
|
|
pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
|
|
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"enabling SATA channels (0x%x)\n",
|
|
(int) tmp8);
|
|
tmp8 |= ALL_PORTS;
|
|
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
|
|
}
|
|
|
|
/* make sure interrupts for each channel sent to us */
|
|
pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
|
|
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"enabling SATA channel interrupts (0x%x)\n",
|
|
(int) tmp8);
|
|
tmp8 |= ALL_PORTS;
|
|
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
|
|
}
|
|
|
|
/* make sure native mode is enabled */
|
|
pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
|
|
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"enabling SATA channel native mode (0x%x)\n",
|
|
(int) tmp8);
|
|
tmp8 |= NATIVE_MODE_ALL;
|
|
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
|
|
}
|
|
}
|
|
|
|
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
unsigned int i;
|
|
int rc;
|
|
struct ata_host *host;
|
|
int board_id = (int) ent->driver_data;
|
|
const unsigned *bar_sizes;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (board_id == vt6420)
|
|
bar_sizes = &svia_bar_sizes[0];
|
|
else
|
|
bar_sizes = &vt6421_bar_sizes[0];
|
|
|
|
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
|
|
if ((pci_resource_start(pdev, i) == 0) ||
|
|
(pci_resource_len(pdev, i) < bar_sizes[i])) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
|
|
i,
|
|
(unsigned long long)pci_resource_start(pdev, i),
|
|
(unsigned long long)pci_resource_len(pdev, i));
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (board_id == vt6420)
|
|
rc = vt6420_prepare_host(pdev, &host);
|
|
else
|
|
rc = vt6421_prepare_host(pdev, &host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
svia_configure(pdev);
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
|
|
IRQF_SHARED, &svia_sht);
|
|
}
|
|
|
|
static int __init svia_init(void)
|
|
{
|
|
return pci_register_driver(&svia_pci_driver);
|
|
}
|
|
|
|
static void __exit svia_exit(void)
|
|
{
|
|
pci_unregister_driver(&svia_pci_driver);
|
|
}
|
|
|
|
module_init(svia_init);
|
|
module_exit(svia_exit);
|