mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 12:24:54 +07:00
465b3d77b1
The change adds a number of basic peripherals found on i.MX31 SoC: * GPIO controllers, * I2C master controllers, * SPI master controllers, * ATA controller, * SDHC controllers, * RTC, watchdog and PWM contollers, * SDMA, * IRAM, * NAND and WEIM controllers on EMI. The added controller devices were tested on Freescale i.MX31 powered LogicPD Lite SoM and baseboard. DMA functionality was tested on SDHC and SPI controllers so far, thus dmas properties are added to those device nodes only. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
373 lines
8.5 KiB
Plaintext
373 lines
8.5 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
|
|
// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* The decompressor and also some bootloaders rely on a
|
|
* pre-existing /chosen node to be available to insert the
|
|
* command line and merge other ATAGS info.
|
|
* Also for U-Boot there must be a pre-existing /memory node.
|
|
*/
|
|
chosen {};
|
|
memory { device_type = "memory"; };
|
|
|
|
aliases {
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
spi0 = &spi1;
|
|
spi1 = &spi2;
|
|
spi2 = &spi3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,arm1136jf-s";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
avic: interrupt-controller@68000000 {
|
|
compatible = "fsl,imx31-avic", "fsl,avic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x68000000 0x100000>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&avic>;
|
|
ranges;
|
|
|
|
iram: iram@1fffc000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x1fffc000 0x4000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x1fffc000 0x4000>;
|
|
};
|
|
|
|
aips@43f00000 { /* AIPS1 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x43f00000 0x100000>;
|
|
ranges;
|
|
|
|
i2c1: i2c@43f80000 {
|
|
compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
|
|
reg = <0x43f80000 0x4000>;
|
|
interrupts = <10>;
|
|
clocks = <&clks 33>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@43f84000 {
|
|
compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
|
|
reg = <0x43f84000 0x4000>;
|
|
interrupts = <3>;
|
|
clocks = <&clks 35>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ata: ata@43f8c000 {
|
|
compatible = "fsl,imx31-pata", "fsl,imx27-pata";
|
|
reg = <0x43f8c000 0x4000>;
|
|
interrupts = <15>;
|
|
clocks = <&clks 26>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@43f90000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43f90000 0x4000>;
|
|
interrupts = <45>;
|
|
clocks = <&clks 10>, <&clks 30>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@43f94000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43f94000 0x4000>;
|
|
interrupts = <32>;
|
|
clocks = <&clks 10>, <&clks 31>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@43f98000 {
|
|
compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
|
|
reg = <0x43f98000 0x4000>;
|
|
interrupts = <4>;
|
|
clocks = <&clks 34>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@43fa4000 {
|
|
compatible = "fsl,imx31-cspi";
|
|
reg = <0x43fa4000 0x4000>;
|
|
interrupts = <14>;
|
|
clocks = <&clks 10>, <&clks 53>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
|
|
dma-names = "rx", "tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
kpp: kpp@43fa8000 {
|
|
compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
|
|
reg = <0x43fa8000 0x4000>;
|
|
interrupts = <24>;
|
|
clocks = <&clks 46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@43fb0000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43fb0000 0x4000>;
|
|
clocks = <&clks 10>, <&clks 49>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@43fb4000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x43fb4000 0x4000>;
|
|
interrupts = <47>;
|
|
clocks = <&clks 10>, <&clks 50>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spba@50000000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x50000000 0x100000>;
|
|
ranges;
|
|
|
|
sdhci1: sdhci@50004000 {
|
|
compatible = "fsl,imx31-mmc";
|
|
reg = <0x50004000 0x4000>;
|
|
interrupts = <9>;
|
|
clocks = <&clks 10>, <&clks 20>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 20 3 0>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci2: sdhci@50008000 {
|
|
compatible = "fsl,imx31-mmc";
|
|
reg = <0x50008000 0x4000>;
|
|
interrupts = <8>;
|
|
clocks = <&clks 10>, <&clks 21>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 21 3 0>;
|
|
dma-names = "rx-tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@5000c000 {
|
|
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
|
|
reg = <0x5000c000 0x4000>;
|
|
interrupts = <18>;
|
|
clocks = <&clks 10>, <&clks 48>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: cspi@50010000 {
|
|
compatible = "fsl,imx31-cspi";
|
|
reg = <0x50010000 0x4000>;
|
|
interrupts = <13>;
|
|
clocks = <&clks 10>, <&clks 54>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
|
|
dma-names = "rx", "tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iim: iim@5001c000 {
|
|
compatible = "fsl,imx31-iim", "fsl,imx27-iim";
|
|
reg = <0x5001c000 0x1000>;
|
|
interrupts = <19>;
|
|
clocks = <&clks 25>;
|
|
};
|
|
};
|
|
|
|
aips@53f00000 { /* AIPS2 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x53f00000 0x100000>;
|
|
ranges;
|
|
|
|
clks: ccm@53f80000{
|
|
compatible = "fsl,imx31-ccm";
|
|
reg = <0x53f80000 0x4000>;
|
|
interrupts = <31>, <53>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
spi3: cspi@53f84000 {
|
|
compatible = "fsl,imx31-cspi";
|
|
reg = <0x53f84000 0x4000>;
|
|
interrupts = <17>;
|
|
clocks = <&clks 10>, <&clks 28>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
|
|
dma-names = "rx", "tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt: timer@53f90000 {
|
|
compatible = "fsl,imx31-gpt";
|
|
reg = <0x53f90000 0x4000>;
|
|
interrupts = <29>;
|
|
clocks = <&clks 10>, <&clks 22>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
gpio3: gpio@53fa4000 {
|
|
compatible = "fsl,imx31-gpio";
|
|
reg = <0x53fa4000 0x4000>;
|
|
interrupts = <56>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
rng@53fb0000 {
|
|
compatible = "fsl,imx31-rnga";
|
|
reg = <0x53fb0000 0x4000>;
|
|
interrupts = <22>;
|
|
clocks = <&clks 29>;
|
|
};
|
|
|
|
gpio1: gpio@53fcc000 {
|
|
compatible = "fsl,imx31-gpio";
|
|
reg = <0x53fcc000 0x4000>;
|
|
interrupts = <52>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@53fd0000 {
|
|
compatible = "fsl,imx31-gpio";
|
|
reg = <0x53fd0000 0x4000>;
|
|
interrupts = <51>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
sdma: sdma@53fd4000 {
|
|
compatible = "fsl,imx31-sdma";
|
|
reg = <0x53fd4000 0x4000>;
|
|
interrupts = <34>;
|
|
clocks = <&clks 10>, <&clks 27>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
|
|
};
|
|
|
|
rtc: rtc@53fd8000 {
|
|
compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
|
|
reg = <0x53fd8000 0x4000>;
|
|
interrupts = <25>;
|
|
clocks = <&clks 2>, <&clks 40>;
|
|
clock-names = "ref", "ipg";
|
|
};
|
|
|
|
wdog: wdog@53fdc000 {
|
|
compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
|
|
reg = <0x53fdc000 0x4000>;
|
|
clocks = <&clks 41>;
|
|
};
|
|
|
|
pwm: pwm@53fe0000 {
|
|
compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
|
|
reg = <0x53fe0000 0x4000>;
|
|
interrupts = <26>;
|
|
clocks = <&clks 10>, <&clks 42>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
emi@b8000000 { /* External Memory Interface */
|
|
compatible = "simple-bus";
|
|
reg = <0xb8000000 0x5000>;
|
|
ranges;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
nfc: nand@b8000000 {
|
|
compatible = "fsl,imx31-nand", "fsl,imx27-nand";
|
|
reg = <0xb8000000 0x1000>;
|
|
interrupts = <33>;
|
|
clocks = <&clks 9>;
|
|
dmas = <&sdma 30 17 0>;
|
|
dma-names = "rx-tx";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
weim: weim@b8002000 {
|
|
compatible = "fsl,imx31-weim", "fsl,imx27-weim";
|
|
reg = <0xb8002000 0x1000>;
|
|
clocks = <&clks 56>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0xa0000000 0x08000000
|
|
1 0 0xa8000000 0x08000000
|
|
2 0 0xb0000000 0x02000000
|
|
3 0 0xb2000000 0x02000000
|
|
4 0 0xb4000000 0x02000000
|
|
5 0 0xb6000000 0x02000000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|