mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 08:06:49 +07:00
1ae68f95de
Remove the function prcmu_get_boot_status() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
3241 lines
82 KiB
C
3241 lines
82 KiB
C
/*
|
|
* Copyright (C) STMicroelectronics 2009
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License v2
|
|
* Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
|
|
* Author: Sundar Iyer <sundar.iyer@stericsson.com>
|
|
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
|
|
*
|
|
* U8500 PRCM Unit interface driver
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/dbx500-prcmu.h>
|
|
#include <linux/mfd/abx500/ab8500.h>
|
|
#include <linux/regulator/db8500-prcmu.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/platform_data/ux500_wdt.h>
|
|
#include <linux/platform_data/db8500_thermal.h>
|
|
#include "dbx500-prcmu-regs.h"
|
|
|
|
/* Index of different voltages to be used when accessing AVSData */
|
|
#define PRCM_AVS_BASE 0x2FC
|
|
#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0)
|
|
#define PRCM_AVS_VBB_MAX_OPP (PRCM_AVS_BASE + 0x1)
|
|
#define PRCM_AVS_VBB_100_OPP (PRCM_AVS_BASE + 0x2)
|
|
#define PRCM_AVS_VBB_50_OPP (PRCM_AVS_BASE + 0x3)
|
|
#define PRCM_AVS_VARM_MAX_OPP (PRCM_AVS_BASE + 0x4)
|
|
#define PRCM_AVS_VARM_100_OPP (PRCM_AVS_BASE + 0x5)
|
|
#define PRCM_AVS_VARM_50_OPP (PRCM_AVS_BASE + 0x6)
|
|
#define PRCM_AVS_VARM_RET (PRCM_AVS_BASE + 0x7)
|
|
#define PRCM_AVS_VAPE_100_OPP (PRCM_AVS_BASE + 0x8)
|
|
#define PRCM_AVS_VAPE_50_OPP (PRCM_AVS_BASE + 0x9)
|
|
#define PRCM_AVS_VMOD_100_OPP (PRCM_AVS_BASE + 0xA)
|
|
#define PRCM_AVS_VMOD_50_OPP (PRCM_AVS_BASE + 0xB)
|
|
#define PRCM_AVS_VSAFE (PRCM_AVS_BASE + 0xC)
|
|
|
|
#define PRCM_AVS_VOLTAGE 0
|
|
#define PRCM_AVS_VOLTAGE_MASK 0x3f
|
|
#define PRCM_AVS_ISSLOWSTARTUP 6
|
|
#define PRCM_AVS_ISSLOWSTARTUP_MASK (1 << PRCM_AVS_ISSLOWSTARTUP)
|
|
#define PRCM_AVS_ISMODEENABLE 7
|
|
#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE)
|
|
|
|
#define PRCM_BOOT_STATUS 0xFFF
|
|
#define PRCM_ROMCODE_A2P 0xFFE
|
|
#define PRCM_ROMCODE_P2A 0xFFD
|
|
#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */
|
|
|
|
#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
|
|
|
|
#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */
|
|
#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0)
|
|
#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1)
|
|
#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2)
|
|
#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3)
|
|
#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4)
|
|
#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5)
|
|
#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8)
|
|
|
|
/* Req Mailboxes */
|
|
#define PRCM_REQ_MB0 0xFDC /* 12 bytes */
|
|
#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */
|
|
#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */
|
|
#define PRCM_REQ_MB3 0xE4C /* 372 bytes */
|
|
#define PRCM_REQ_MB4 0xE48 /* 4 bytes */
|
|
#define PRCM_REQ_MB5 0xE44 /* 4 bytes */
|
|
|
|
/* Ack Mailboxes */
|
|
#define PRCM_ACK_MB0 0xE08 /* 52 bytes */
|
|
#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
|
|
#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
|
|
#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
|
|
#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
|
|
#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
|
|
|
|
/* Mailbox 0 headers */
|
|
#define MB0H_POWER_STATE_TRANS 0
|
|
#define MB0H_CONFIG_WAKEUPS_EXE 1
|
|
#define MB0H_READ_WAKEUP_ACK 3
|
|
#define MB0H_CONFIG_WAKEUPS_SLEEP 4
|
|
|
|
#define MB0H_WAKEUP_EXE 2
|
|
#define MB0H_WAKEUP_SLEEP 5
|
|
|
|
/* Mailbox 0 REQs */
|
|
#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0)
|
|
#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1)
|
|
#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2)
|
|
#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3)
|
|
#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4)
|
|
#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8)
|
|
|
|
/* Mailbox 0 ACKs */
|
|
#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0)
|
|
#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1)
|
|
#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4)
|
|
#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8)
|
|
#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C)
|
|
#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20)
|
|
#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20
|
|
|
|
/* Mailbox 1 headers */
|
|
#define MB1H_ARM_APE_OPP 0x0
|
|
#define MB1H_RESET_MODEM 0x2
|
|
#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
|
|
#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
|
|
#define MB1H_RELEASE_USB_WAKEUP 0x5
|
|
#define MB1H_PLL_ON_OFF 0x6
|
|
|
|
/* Mailbox 1 Requests */
|
|
#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
|
|
#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
|
|
#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
|
|
#define PLL_SOC0_OFF 0x1
|
|
#define PLL_SOC0_ON 0x2
|
|
#define PLL_SOC1_OFF 0x4
|
|
#define PLL_SOC1_ON 0x8
|
|
|
|
/* Mailbox 1 ACKs */
|
|
#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
|
|
#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1)
|
|
#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2)
|
|
#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3)
|
|
|
|
/* Mailbox 2 headers */
|
|
#define MB2H_DPS 0x0
|
|
#define MB2H_AUTO_PWR 0x1
|
|
|
|
/* Mailbox 2 REQs */
|
|
#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0)
|
|
#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1)
|
|
#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2)
|
|
#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3)
|
|
#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4)
|
|
#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5)
|
|
#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6)
|
|
#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7)
|
|
#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8)
|
|
#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC)
|
|
|
|
/* Mailbox 2 ACKs */
|
|
#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
|
|
#define HWACC_PWR_ST_OK 0xFE
|
|
|
|
/* Mailbox 3 headers */
|
|
#define MB3H_ANC 0x0
|
|
#define MB3H_SIDETONE 0x1
|
|
#define MB3H_SYSCLK 0xE
|
|
|
|
/* Mailbox 3 Requests */
|
|
#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0)
|
|
#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20)
|
|
#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60)
|
|
#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64)
|
|
#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68)
|
|
#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C)
|
|
#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C)
|
|
|
|
/* Mailbox 4 headers */
|
|
#define MB4H_DDR_INIT 0x0
|
|
#define MB4H_MEM_ST 0x1
|
|
#define MB4H_HOTDOG 0x12
|
|
#define MB4H_HOTMON 0x13
|
|
#define MB4H_HOT_PERIOD 0x14
|
|
#define MB4H_A9WDOG_CONF 0x16
|
|
#define MB4H_A9WDOG_EN 0x17
|
|
#define MB4H_A9WDOG_DIS 0x18
|
|
#define MB4H_A9WDOG_LOAD 0x19
|
|
#define MB4H_A9WDOG_KICK 0x20
|
|
|
|
/* Mailbox 4 Requests */
|
|
#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
|
|
#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1)
|
|
#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3)
|
|
#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0)
|
|
#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0)
|
|
#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1)
|
|
#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2)
|
|
#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
|
|
#define HOTMON_CONFIG_LOW BIT(0)
|
|
#define HOTMON_CONFIG_HIGH BIT(1)
|
|
#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0)
|
|
#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1)
|
|
#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2)
|
|
#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3)
|
|
#define A9WDOG_AUTO_OFF_EN BIT(7)
|
|
#define A9WDOG_AUTO_OFF_DIS 0
|
|
#define A9WDOG_ID_MASK 0xf
|
|
|
|
/* Mailbox 5 Requests */
|
|
#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
|
|
#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1)
|
|
#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2)
|
|
#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3)
|
|
#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
|
|
#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
|
|
#define PRCMU_I2C_STOP_EN BIT(3)
|
|
|
|
/* Mailbox 5 ACKs */
|
|
#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1)
|
|
#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3)
|
|
#define I2C_WR_OK 0x1
|
|
#define I2C_RD_OK 0x2
|
|
|
|
#define NUM_MB 8
|
|
#define MBOX_BIT BIT
|
|
#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
|
|
|
|
/*
|
|
* Wakeups/IRQs
|
|
*/
|
|
|
|
#define WAKEUP_BIT_RTC BIT(0)
|
|
#define WAKEUP_BIT_RTT0 BIT(1)
|
|
#define WAKEUP_BIT_RTT1 BIT(2)
|
|
#define WAKEUP_BIT_HSI0 BIT(3)
|
|
#define WAKEUP_BIT_HSI1 BIT(4)
|
|
#define WAKEUP_BIT_CA_WAKE BIT(5)
|
|
#define WAKEUP_BIT_USB BIT(6)
|
|
#define WAKEUP_BIT_ABB BIT(7)
|
|
#define WAKEUP_BIT_ABB_FIFO BIT(8)
|
|
#define WAKEUP_BIT_SYSCLK_OK BIT(9)
|
|
#define WAKEUP_BIT_CA_SLEEP BIT(10)
|
|
#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
|
|
#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
|
|
#define WAKEUP_BIT_ANC_OK BIT(13)
|
|
#define WAKEUP_BIT_SW_ERROR BIT(14)
|
|
#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
|
|
#define WAKEUP_BIT_ARM BIT(17)
|
|
#define WAKEUP_BIT_HOTMON_LOW BIT(18)
|
|
#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
|
|
#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
|
|
#define WAKEUP_BIT_GPIO0 BIT(23)
|
|
#define WAKEUP_BIT_GPIO1 BIT(24)
|
|
#define WAKEUP_BIT_GPIO2 BIT(25)
|
|
#define WAKEUP_BIT_GPIO3 BIT(26)
|
|
#define WAKEUP_BIT_GPIO4 BIT(27)
|
|
#define WAKEUP_BIT_GPIO5 BIT(28)
|
|
#define WAKEUP_BIT_GPIO6 BIT(29)
|
|
#define WAKEUP_BIT_GPIO7 BIT(30)
|
|
#define WAKEUP_BIT_GPIO8 BIT(31)
|
|
|
|
static struct {
|
|
bool valid;
|
|
struct prcmu_fw_version version;
|
|
} fw_info;
|
|
|
|
static struct irq_domain *db8500_irq_domain;
|
|
|
|
/*
|
|
* This vector maps irq numbers to the bits in the bit field used in
|
|
* communication with the PRCMU firmware.
|
|
*
|
|
* The reason for having this is to keep the irq numbers contiguous even though
|
|
* the bits in the bit field are not. (The bits also have a tendency to move
|
|
* around, to further complicate matters.)
|
|
*/
|
|
#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name))
|
|
#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
|
|
|
|
#define IRQ_PRCMU_RTC 0
|
|
#define IRQ_PRCMU_RTT0 1
|
|
#define IRQ_PRCMU_RTT1 2
|
|
#define IRQ_PRCMU_HSI0 3
|
|
#define IRQ_PRCMU_HSI1 4
|
|
#define IRQ_PRCMU_CA_WAKE 5
|
|
#define IRQ_PRCMU_USB 6
|
|
#define IRQ_PRCMU_ABB 7
|
|
#define IRQ_PRCMU_ABB_FIFO 8
|
|
#define IRQ_PRCMU_ARM 9
|
|
#define IRQ_PRCMU_MODEM_SW_RESET_REQ 10
|
|
#define IRQ_PRCMU_GPIO0 11
|
|
#define IRQ_PRCMU_GPIO1 12
|
|
#define IRQ_PRCMU_GPIO2 13
|
|
#define IRQ_PRCMU_GPIO3 14
|
|
#define IRQ_PRCMU_GPIO4 15
|
|
#define IRQ_PRCMU_GPIO5 16
|
|
#define IRQ_PRCMU_GPIO6 17
|
|
#define IRQ_PRCMU_GPIO7 18
|
|
#define IRQ_PRCMU_GPIO8 19
|
|
#define IRQ_PRCMU_CA_SLEEP 20
|
|
#define IRQ_PRCMU_HOTMON_LOW 21
|
|
#define IRQ_PRCMU_HOTMON_HIGH 22
|
|
#define NUM_PRCMU_WAKEUPS 23
|
|
|
|
static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
|
|
IRQ_ENTRY(RTC),
|
|
IRQ_ENTRY(RTT0),
|
|
IRQ_ENTRY(RTT1),
|
|
IRQ_ENTRY(HSI0),
|
|
IRQ_ENTRY(HSI1),
|
|
IRQ_ENTRY(CA_WAKE),
|
|
IRQ_ENTRY(USB),
|
|
IRQ_ENTRY(ABB),
|
|
IRQ_ENTRY(ABB_FIFO),
|
|
IRQ_ENTRY(CA_SLEEP),
|
|
IRQ_ENTRY(ARM),
|
|
IRQ_ENTRY(HOTMON_LOW),
|
|
IRQ_ENTRY(HOTMON_HIGH),
|
|
IRQ_ENTRY(MODEM_SW_RESET_REQ),
|
|
IRQ_ENTRY(GPIO0),
|
|
IRQ_ENTRY(GPIO1),
|
|
IRQ_ENTRY(GPIO2),
|
|
IRQ_ENTRY(GPIO3),
|
|
IRQ_ENTRY(GPIO4),
|
|
IRQ_ENTRY(GPIO5),
|
|
IRQ_ENTRY(GPIO6),
|
|
IRQ_ENTRY(GPIO7),
|
|
IRQ_ENTRY(GPIO8)
|
|
};
|
|
|
|
#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1)
|
|
#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name)
|
|
static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
|
|
WAKEUP_ENTRY(RTC),
|
|
WAKEUP_ENTRY(RTT0),
|
|
WAKEUP_ENTRY(RTT1),
|
|
WAKEUP_ENTRY(HSI0),
|
|
WAKEUP_ENTRY(HSI1),
|
|
WAKEUP_ENTRY(USB),
|
|
WAKEUP_ENTRY(ABB),
|
|
WAKEUP_ENTRY(ABB_FIFO),
|
|
WAKEUP_ENTRY(ARM)
|
|
};
|
|
|
|
/*
|
|
* mb0_transfer - state needed for mailbox 0 communication.
|
|
* @lock: The transaction lock.
|
|
* @dbb_events_lock: A lock used to handle concurrent access to (parts of)
|
|
* the request data.
|
|
* @mask_work: Work structure used for (un)masking wakeup interrupts.
|
|
* @req: Request data that need to persist between requests.
|
|
*/
|
|
static struct {
|
|
spinlock_t lock;
|
|
spinlock_t dbb_irqs_lock;
|
|
struct work_struct mask_work;
|
|
struct mutex ac_wake_lock;
|
|
struct completion ac_wake_work;
|
|
struct {
|
|
u32 dbb_irqs;
|
|
u32 dbb_wakeups;
|
|
u32 abb_events;
|
|
} req;
|
|
} mb0_transfer;
|
|
|
|
/*
|
|
* mb1_transfer - state needed for mailbox 1 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
* @ape_opp: The current APE OPP.
|
|
* @ack: Reply ("acknowledge") data.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
u8 ape_opp;
|
|
struct {
|
|
u8 header;
|
|
u8 arm_opp;
|
|
u8 ape_opp;
|
|
u8 ape_voltage_status;
|
|
} ack;
|
|
} mb1_transfer;
|
|
|
|
/*
|
|
* mb2_transfer - state needed for mailbox 2 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
* @auto_pm_lock: The autonomous power management configuration lock.
|
|
* @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
|
|
* @req: Request data that need to persist between requests.
|
|
* @ack: Reply ("acknowledge") data.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
spinlock_t auto_pm_lock;
|
|
bool auto_pm_enabled;
|
|
struct {
|
|
u8 status;
|
|
} ack;
|
|
} mb2_transfer;
|
|
|
|
/*
|
|
* mb3_transfer - state needed for mailbox 3 communication.
|
|
* @lock: The request lock.
|
|
* @sysclk_lock: A lock used to handle concurrent sysclk requests.
|
|
* @sysclk_work: Work structure used for sysclk requests.
|
|
*/
|
|
static struct {
|
|
spinlock_t lock;
|
|
struct mutex sysclk_lock;
|
|
struct completion sysclk_work;
|
|
} mb3_transfer;
|
|
|
|
/*
|
|
* mb4_transfer - state needed for mailbox 4 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
} mb4_transfer;
|
|
|
|
/*
|
|
* mb5_transfer - state needed for mailbox 5 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
* @ack: Reply ("acknowledge") data.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
struct {
|
|
u8 status;
|
|
u8 value;
|
|
} ack;
|
|
} mb5_transfer;
|
|
|
|
static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
|
|
|
|
/* Spinlocks */
|
|
static DEFINE_SPINLOCK(prcmu_lock);
|
|
static DEFINE_SPINLOCK(clkout_lock);
|
|
|
|
/* Global var to runtime determine TCDM base for v2 or v1 */
|
|
static __iomem void *tcdm_base;
|
|
static __iomem void *prcmu_base;
|
|
|
|
struct clk_mgt {
|
|
u32 offset;
|
|
u32 pllsw;
|
|
int branch;
|
|
bool clk38div;
|
|
};
|
|
|
|
enum {
|
|
PLL_RAW,
|
|
PLL_FIX,
|
|
PLL_DIV
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(clk_mgt_lock);
|
|
|
|
#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \
|
|
{ (PRCM_##_name##_MGT), 0 , _branch, _clk38div}
|
|
static struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
|
|
CLK_MGT_ENTRY(SGACLK, PLL_DIV, false),
|
|
CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false),
|
|
CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false),
|
|
CLK_MGT_ENTRY(DMACLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true),
|
|
CLK_MGT_ENTRY(TVCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true),
|
|
CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false),
|
|
};
|
|
|
|
struct dsiclk {
|
|
u32 divsel_mask;
|
|
u32 divsel_shift;
|
|
u32 divsel;
|
|
};
|
|
|
|
static struct dsiclk dsiclk[2] = {
|
|
{
|
|
.divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK,
|
|
.divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT,
|
|
.divsel = PRCM_DSI_PLLOUT_SEL_PHI,
|
|
},
|
|
{
|
|
.divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK,
|
|
.divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT,
|
|
.divsel = PRCM_DSI_PLLOUT_SEL_PHI,
|
|
}
|
|
};
|
|
|
|
struct dsiescclk {
|
|
u32 en;
|
|
u32 div_mask;
|
|
u32 div_shift;
|
|
};
|
|
|
|
static struct dsiescclk dsiescclk[3] = {
|
|
{
|
|
.en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN,
|
|
.div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK,
|
|
.div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT,
|
|
},
|
|
{
|
|
.en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN,
|
|
.div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK,
|
|
.div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT,
|
|
},
|
|
{
|
|
.en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN,
|
|
.div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK,
|
|
.div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT,
|
|
}
|
|
};
|
|
|
|
|
|
/*
|
|
* Used by MCDE to setup all necessary PRCMU registers
|
|
*/
|
|
#define PRCMU_RESET_DSIPLL 0x00004000
|
|
#define PRCMU_UNCLAMP_DSIPLL 0x00400800
|
|
|
|
#define PRCMU_CLK_PLL_DIV_SHIFT 0
|
|
#define PRCMU_CLK_PLL_SW_SHIFT 5
|
|
#define PRCMU_CLK_38 (1 << 9)
|
|
#define PRCMU_CLK_38_SRC (1 << 10)
|
|
#define PRCMU_CLK_38_DIV (1 << 11)
|
|
|
|
/* PLLDIV=12, PLLSW=4 (PLLDDR) */
|
|
#define PRCMU_DSI_CLOCK_SETTING 0x0000008C
|
|
|
|
/* DPI 50000000 Hz */
|
|
#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
|
|
(16 << PRCMU_CLK_PLL_DIV_SHIFT))
|
|
#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00
|
|
|
|
/* D=101, N=1, R=4, SELDIV2=0 */
|
|
#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165
|
|
|
|
#define PRCMU_ENABLE_PLLDSI 0x00000001
|
|
#define PRCMU_DISABLE_PLLDSI 0x00000000
|
|
#define PRCMU_RELEASE_RESET_DSS 0x0000400C
|
|
#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202
|
|
/* ESC clk, div0=1, div1=1, div2=3 */
|
|
#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101
|
|
#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101
|
|
#define PRCMU_DSI_RESET_SW 0x00000007
|
|
|
|
#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
|
|
|
|
int db8500_prcmu_enable_dsipll(void)
|
|
{
|
|
int i;
|
|
|
|
/* Clear DSIPLL_RESETN */
|
|
writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
|
|
/* Unclamp DSIPLL in/out */
|
|
writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
|
|
|
|
/* Set DSI PLL FREQ */
|
|
writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
|
|
writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
|
|
/* Enable Escape clocks */
|
|
writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
|
|
|
|
/* Start DSI PLL */
|
|
writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
|
|
/* Reset DSI PLL */
|
|
writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
|
|
for (i = 0; i < 10; i++) {
|
|
if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
|
|
== PRCMU_PLLDSI_LOCKP_LOCKED)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
/* Set DSIPLL_RESETN */
|
|
writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
|
|
return 0;
|
|
}
|
|
|
|
int db8500_prcmu_disable_dsipll(void)
|
|
{
|
|
/* Disable dsi pll */
|
|
writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
|
|
/* Disable escapeclock */
|
|
writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
|
|
return 0;
|
|
}
|
|
|
|
int db8500_prcmu_set_display_clocks(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&clk_mgt_lock, flags);
|
|
|
|
/* Grab the HW semaphore. */
|
|
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
|
|
cpu_relax();
|
|
|
|
writel(PRCMU_DSI_CLOCK_SETTING, prcmu_base + PRCM_HDMICLK_MGT);
|
|
writel(PRCMU_DSI_LP_CLOCK_SETTING, prcmu_base + PRCM_TVCLK_MGT);
|
|
writel(PRCMU_DPI_CLOCK_SETTING, prcmu_base + PRCM_LCDCLK_MGT);
|
|
|
|
/* Release the HW semaphore. */
|
|
writel(0, PRCM_SEM);
|
|
|
|
spin_unlock_irqrestore(&clk_mgt_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 db8500_prcmu_read(unsigned int reg)
|
|
{
|
|
return readl(prcmu_base + reg);
|
|
}
|
|
|
|
void db8500_prcmu_write(unsigned int reg, u32 value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&prcmu_lock, flags);
|
|
writel(value, (prcmu_base + reg));
|
|
spin_unlock_irqrestore(&prcmu_lock, flags);
|
|
}
|
|
|
|
void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
|
|
{
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&prcmu_lock, flags);
|
|
val = readl(prcmu_base + reg);
|
|
val = ((val & ~mask) | (value & mask));
|
|
writel(val, (prcmu_base + reg));
|
|
spin_unlock_irqrestore(&prcmu_lock, flags);
|
|
}
|
|
|
|
struct prcmu_fw_version *prcmu_get_fw_version(void)
|
|
{
|
|
return fw_info.valid ? &fw_info.version : NULL;
|
|
}
|
|
|
|
bool prcmu_has_arm_maxopp(void)
|
|
{
|
|
return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
|
|
PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
|
|
}
|
|
|
|
/**
|
|
* prcmu_set_rc_a2p - This function is used to run few power state sequences
|
|
* @val: Value to be set, i.e. transition requested
|
|
* Returns: 0 on success, -EINVAL on invalid argument
|
|
*
|
|
* This function is used to run the following power state sequences -
|
|
* any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
|
|
*/
|
|
int prcmu_set_rc_a2p(enum romcode_write val)
|
|
{
|
|
if (val < RDY_2_DS || val > RDY_2_XP70_RST)
|
|
return -EINVAL;
|
|
writeb(val, (tcdm_base + PRCM_ROMCODE_A2P));
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_rc_p2a - This function is used to get power state sequences
|
|
* Returns: the power transition that has last happened
|
|
*
|
|
* This function can return the following transitions-
|
|
* any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
|
|
*/
|
|
enum romcode_read prcmu_get_rc_p2a(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_ROMCODE_P2A);
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_current_mode - Return the current XP70 power mode
|
|
* Returns: Returns the current AP(ARM) power mode: init,
|
|
* apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset
|
|
*/
|
|
enum ap_pwrst prcmu_get_xp70_current_state(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE);
|
|
}
|
|
|
|
/**
|
|
* prcmu_config_clkout - Configure one of the programmable clock outputs.
|
|
* @clkout: The CLKOUT number (0 or 1).
|
|
* @source: The clock to be used (one of the PRCMU_CLKSRC_*).
|
|
* @div: The divider to be applied.
|
|
*
|
|
* Configures one of the programmable clock outputs (CLKOUTs).
|
|
* @div should be in the range [1,63] to request a configuration, or 0 to
|
|
* inform that the configuration is no longer requested.
|
|
*/
|
|
int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
|
|
{
|
|
static int requests[2];
|
|
int r = 0;
|
|
unsigned long flags;
|
|
u32 val;
|
|
u32 bits;
|
|
u32 mask;
|
|
u32 div_mask;
|
|
|
|
BUG_ON(clkout > 1);
|
|
BUG_ON(div > 63);
|
|
BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
|
|
|
|
if (!div && !requests[clkout])
|
|
return -EINVAL;
|
|
|
|
switch (clkout) {
|
|
case 0:
|
|
div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
|
|
mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
|
|
bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
|
|
(div << PRCM_CLKOCR_CLKODIV0_SHIFT));
|
|
break;
|
|
case 1:
|
|
div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
|
|
mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
|
|
PRCM_CLKOCR_CLK1TYPE);
|
|
bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
|
|
(div << PRCM_CLKOCR_CLKODIV1_SHIFT));
|
|
break;
|
|
}
|
|
bits &= mask;
|
|
|
|
spin_lock_irqsave(&clkout_lock, flags);
|
|
|
|
val = readl(PRCM_CLKOCR);
|
|
if (val & div_mask) {
|
|
if (div) {
|
|
if ((val & mask) != bits) {
|
|
r = -EBUSY;
|
|
goto unlock_and_return;
|
|
}
|
|
} else {
|
|
if ((val & mask & ~div_mask) != bits) {
|
|
r = -EINVAL;
|
|
goto unlock_and_return;
|
|
}
|
|
}
|
|
}
|
|
writel((bits | (val & ~mask)), PRCM_CLKOCR);
|
|
requests[clkout] += (div ? 1 : -1);
|
|
|
|
unlock_and_return:
|
|
spin_unlock_irqrestore(&clkout_lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
|
|
{
|
|
unsigned long flags;
|
|
|
|
BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
|
|
cpu_relax();
|
|
|
|
writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
|
|
writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE));
|
|
writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE));
|
|
writeb((keep_ulp_clk ? 1 : 0),
|
|
(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
|
|
writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
|
|
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
u8 db8500_prcmu_get_power_state_result(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS);
|
|
}
|
|
|
|
/* This function should only be called while mb0_transfer.lock is held. */
|
|
static void config_wakeups(void)
|
|
{
|
|
const u8 header[2] = {
|
|
MB0H_CONFIG_WAKEUPS_EXE,
|
|
MB0H_CONFIG_WAKEUPS_SLEEP
|
|
};
|
|
static u32 last_dbb_events;
|
|
static u32 last_abb_events;
|
|
u32 dbb_events;
|
|
u32 abb_events;
|
|
unsigned int i;
|
|
|
|
dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
|
|
dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
|
|
|
|
abb_events = mb0_transfer.req.abb_events;
|
|
|
|
if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
|
|
return;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
|
|
cpu_relax();
|
|
writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
|
|
writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
|
|
writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
|
|
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
|
|
}
|
|
last_dbb_events = dbb_events;
|
|
last_abb_events = abb_events;
|
|
}
|
|
|
|
void db8500_prcmu_enable_wakeups(u32 wakeups)
|
|
{
|
|
unsigned long flags;
|
|
u32 bits;
|
|
int i;
|
|
|
|
BUG_ON(wakeups != (wakeups & VALID_WAKEUPS));
|
|
|
|
for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) {
|
|
if (wakeups & BIT(i))
|
|
bits |= prcmu_wakeup_bit[i];
|
|
}
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
mb0_transfer.req.dbb_wakeups = bits;
|
|
config_wakeups();
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
void db8500_prcmu_config_abb_event_readout(u32 abb_events)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
mb0_transfer.req.abb_events = abb_events;
|
|
config_wakeups();
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
|
|
{
|
|
if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
|
|
*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
|
|
else
|
|
*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500);
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_set_arm_opp - set the appropriate ARM OPP
|
|
* @opp: The new ARM operating point to which transition is to be made
|
|
* Returns: 0 on success, non-zero on failure
|
|
*
|
|
* This function sets the the operating point of the ARM.
|
|
*/
|
|
int db8500_prcmu_set_arm_opp(u8 opp)
|
|
{
|
|
int r;
|
|
|
|
if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK)
|
|
return -EINVAL;
|
|
|
|
r = 0;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
|
|
writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
|
|
|
|
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
|
|
(mb1_transfer.ack.arm_opp != opp))
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_get_arm_opp - get the current ARM OPP
|
|
*
|
|
* Returns: the current ARM OPP
|
|
*/
|
|
int db8500_prcmu_get_arm_opp(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_get_ddr_opp - get the current DDR OPP
|
|
*
|
|
* Returns: the current DDR OPP
|
|
*/
|
|
int db8500_prcmu_get_ddr_opp(void)
|
|
{
|
|
return readb(PRCM_DDR_SUBSYS_APE_MINBW);
|
|
}
|
|
|
|
/**
|
|
* db8500_set_ddr_opp - set the appropriate DDR OPP
|
|
* @opp: The new DDR operating point to which transition is to be made
|
|
* Returns: 0 on success, non-zero on failure
|
|
*
|
|
* This function sets the operating point of the DDR.
|
|
*/
|
|
static bool enable_set_ddr_opp;
|
|
int db8500_prcmu_set_ddr_opp(u8 opp)
|
|
{
|
|
if (opp < DDR_100_OPP || opp > DDR_25_OPP)
|
|
return -EINVAL;
|
|
/* Changing the DDR OPP can hang the hardware pre-v21 */
|
|
if (enable_set_ddr_opp)
|
|
writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
|
|
static void request_even_slower_clocks(bool enable)
|
|
{
|
|
u32 clock_reg[] = {
|
|
PRCM_ACLK_MGT,
|
|
PRCM_DMACLK_MGT
|
|
};
|
|
unsigned long flags;
|
|
unsigned int i;
|
|
|
|
spin_lock_irqsave(&clk_mgt_lock, flags);
|
|
|
|
/* Grab the HW semaphore. */
|
|
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
|
|
cpu_relax();
|
|
|
|
for (i = 0; i < ARRAY_SIZE(clock_reg); i++) {
|
|
u32 val;
|
|
u32 div;
|
|
|
|
val = readl(prcmu_base + clock_reg[i]);
|
|
div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
|
|
if (enable) {
|
|
if ((div <= 1) || (div > 15)) {
|
|
pr_err("prcmu: Bad clock divider %d in %s\n",
|
|
div, __func__);
|
|
goto unlock_and_return;
|
|
}
|
|
div <<= 1;
|
|
} else {
|
|
if (div <= 2)
|
|
goto unlock_and_return;
|
|
div >>= 1;
|
|
}
|
|
val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
|
|
(div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
|
|
writel(val, prcmu_base + clock_reg[i]);
|
|
}
|
|
|
|
unlock_and_return:
|
|
/* Release the HW semaphore. */
|
|
writel(0, PRCM_SEM);
|
|
|
|
spin_unlock_irqrestore(&clk_mgt_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* db8500_set_ape_opp - set the appropriate APE OPP
|
|
* @opp: The new APE operating point to which transition is to be made
|
|
* Returns: 0 on success, non-zero on failure
|
|
*
|
|
* This function sets the operating point of the APE.
|
|
*/
|
|
int db8500_prcmu_set_ape_opp(u8 opp)
|
|
{
|
|
int r = 0;
|
|
|
|
if (opp == mb1_transfer.ape_opp)
|
|
return 0;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)
|
|
request_even_slower_clocks(false);
|
|
|
|
if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP))
|
|
goto skip_message;
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
|
|
writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp),
|
|
(tcdm_base + PRCM_REQ_MB1_APE_OPP));
|
|
|
|
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
|
|
(mb1_transfer.ack.ape_opp != opp))
|
|
r = -EIO;
|
|
|
|
skip_message:
|
|
if ((!r && (opp == APE_50_PARTLY_25_OPP)) ||
|
|
(r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)))
|
|
request_even_slower_clocks(true);
|
|
if (!r)
|
|
mb1_transfer.ape_opp = opp;
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_get_ape_opp - get the current APE OPP
|
|
*
|
|
* Returns: the current APE OPP
|
|
*/
|
|
int db8500_prcmu_get_ape_opp(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
|
|
* @enable: true to request the higher voltage, false to drop a request.
|
|
*
|
|
* Calls to this function to enable and disable requests must be balanced.
|
|
*/
|
|
int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
|
|
{
|
|
int r = 0;
|
|
u8 header;
|
|
static unsigned int requests;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
if (enable) {
|
|
if (0 != requests++)
|
|
goto unlock_and_return;
|
|
header = MB1H_REQUEST_APE_OPP_100_VOLT;
|
|
} else {
|
|
if (requests == 0) {
|
|
r = -EIO;
|
|
goto unlock_and_return;
|
|
} else if (1 != requests--) {
|
|
goto unlock_and_return;
|
|
}
|
|
header = MB1H_RELEASE_APE_OPP_100_VOLT;
|
|
}
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
|
|
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != header) ||
|
|
((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
|
|
r = -EIO;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_release_usb_wakeup_state - release the state required by a USB wakeup
|
|
*
|
|
* This function releases the power state requirements of a USB wakeup.
|
|
*/
|
|
int prcmu_release_usb_wakeup_state(void)
|
|
{
|
|
int r = 0;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_RELEASE_USB_WAKEUP,
|
|
(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
|
|
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
|
|
((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int request_pll(u8 clock, bool enable)
|
|
{
|
|
int r = 0;
|
|
|
|
if (clock == PRCMU_PLLSOC0)
|
|
clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF);
|
|
else if (clock == PRCMU_PLLSOC1)
|
|
clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
|
|
else
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
|
|
|
|
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_set_epod - set the state of a EPOD (power domain)
|
|
* @epod_id: The EPOD to set
|
|
* @epod_state: The new EPOD state
|
|
*
|
|
* This function sets the state of a EPOD (power domain). It may not be called
|
|
* from interrupt context.
|
|
*/
|
|
int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
|
|
{
|
|
int r = 0;
|
|
bool ram_retention = false;
|
|
int i;
|
|
|
|
/* check argument */
|
|
BUG_ON(epod_id >= NUM_EPOD_ID);
|
|
|
|
/* set flag if retention is possible */
|
|
switch (epod_id) {
|
|
case EPOD_ID_SVAMMDSP:
|
|
case EPOD_ID_SIAMMDSP:
|
|
case EPOD_ID_ESRAM12:
|
|
case EPOD_ID_ESRAM34:
|
|
ram_retention = true;
|
|
break;
|
|
}
|
|
|
|
/* check argument */
|
|
BUG_ON(epod_state > EPOD_STATE_ON);
|
|
BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention);
|
|
|
|
/* get lock */
|
|
mutex_lock(&mb2_transfer.lock);
|
|
|
|
/* wait for mailbox */
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
|
|
cpu_relax();
|
|
|
|
/* fill in mailbox */
|
|
for (i = 0; i < NUM_EPOD_ID; i++)
|
|
writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i));
|
|
writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id));
|
|
|
|
writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
|
|
|
|
writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
|
|
|
|
/*
|
|
* The current firmware version does not handle errors correctly,
|
|
* and we cannot recover if there is an error.
|
|
* This is expected to change when the firmware is updated.
|
|
*/
|
|
if (!wait_for_completion_timeout(&mb2_transfer.work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
if (mb2_transfer.ack.status != HWACC_PWR_ST_OK)
|
|
r = -EIO;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb2_transfer.lock);
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_configure_auto_pm - Configure autonomous power management.
|
|
* @sleep: Configuration for ApSleep.
|
|
* @idle: Configuration for ApIdle.
|
|
*/
|
|
void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
|
|
struct prcmu_auto_pm_config *idle)
|
|
{
|
|
u32 sleep_cfg;
|
|
u32 idle_cfg;
|
|
unsigned long flags;
|
|
|
|
BUG_ON((sleep == NULL) || (idle == NULL));
|
|
|
|
sleep_cfg = (sleep->sva_auto_pm_enable & 0xF);
|
|
sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF));
|
|
sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF));
|
|
sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF));
|
|
sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF));
|
|
sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF));
|
|
|
|
idle_cfg = (idle->sva_auto_pm_enable & 0xF);
|
|
idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF));
|
|
idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF));
|
|
idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF));
|
|
idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF));
|
|
idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF));
|
|
|
|
spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags);
|
|
|
|
/*
|
|
* The autonomous power management configuration is done through
|
|
* fields in mailbox 2, but these fields are only used as shared
|
|
* variables - i.e. there is no need to send a message.
|
|
*/
|
|
writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP));
|
|
writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE));
|
|
|
|
mb2_transfer.auto_pm_enabled =
|
|
((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
|
|
(sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
|
|
(idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
|
|
(idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON));
|
|
|
|
spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(prcmu_configure_auto_pm);
|
|
|
|
bool prcmu_is_auto_pm_enabled(void)
|
|
{
|
|
return mb2_transfer.auto_pm_enabled;
|
|
}
|
|
|
|
static int request_sysclk(bool enable)
|
|
{
|
|
int r;
|
|
unsigned long flags;
|
|
|
|
r = 0;
|
|
|
|
mutex_lock(&mb3_transfer.sysclk_lock);
|
|
|
|
spin_lock_irqsave(&mb3_transfer.lock, flags);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
|
|
cpu_relax();
|
|
|
|
writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
|
|
|
|
writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
|
|
writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
|
|
|
|
spin_unlock_irqrestore(&mb3_transfer.lock, flags);
|
|
|
|
/*
|
|
* The firmware only sends an ACK if we want to enable the
|
|
* SysClk, and it succeeds.
|
|
*/
|
|
if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
}
|
|
|
|
mutex_unlock(&mb3_transfer.sysclk_lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int request_timclk(bool enable)
|
|
{
|
|
u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK);
|
|
|
|
if (!enable)
|
|
val |= PRCM_TCR_STOP_TIMERS;
|
|
writel(val, PRCM_TCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int request_clock(u8 clock, bool enable)
|
|
{
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&clk_mgt_lock, flags);
|
|
|
|
/* Grab the HW semaphore. */
|
|
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
|
|
cpu_relax();
|
|
|
|
val = readl(prcmu_base + clk_mgt[clock].offset);
|
|
if (enable) {
|
|
val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
|
|
} else {
|
|
clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
|
|
val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
|
|
}
|
|
writel(val, prcmu_base + clk_mgt[clock].offset);
|
|
|
|
/* Release the HW semaphore. */
|
|
writel(0, PRCM_SEM);
|
|
|
|
spin_unlock_irqrestore(&clk_mgt_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int request_sga_clock(u8 clock, bool enable)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (enable) {
|
|
val = readl(PRCM_CGATING_BYPASS);
|
|
writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
|
|
}
|
|
|
|
ret = request_clock(clock, enable);
|
|
|
|
if (!ret && !enable) {
|
|
val = readl(PRCM_CGATING_BYPASS);
|
|
writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline bool plldsi_locked(void)
|
|
{
|
|
return (readl(PRCM_PLLDSI_LOCKP) &
|
|
(PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
|
|
PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
|
|
(PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
|
|
PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
|
|
}
|
|
|
|
static int request_plldsi(bool enable)
|
|
{
|
|
int r = 0;
|
|
u32 val;
|
|
|
|
writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
|
|
PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ?
|
|
PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET));
|
|
|
|
val = readl(PRCM_PLLDSI_ENABLE);
|
|
if (enable)
|
|
val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
|
|
else
|
|
val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
|
|
writel(val, PRCM_PLLDSI_ENABLE);
|
|
|
|
if (enable) {
|
|
unsigned int i;
|
|
bool locked = plldsi_locked();
|
|
|
|
for (i = 10; !locked && (i > 0); --i) {
|
|
udelay(100);
|
|
locked = plldsi_locked();
|
|
}
|
|
if (locked) {
|
|
writel(PRCM_APE_RESETN_DSIPLL_RESETN,
|
|
PRCM_APE_RESETN_SET);
|
|
} else {
|
|
writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
|
|
PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
|
|
PRCM_MMIP_LS_CLAMP_SET);
|
|
val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
|
|
writel(val, PRCM_PLLDSI_ENABLE);
|
|
r = -EAGAIN;
|
|
}
|
|
} else {
|
|
writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR);
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static int request_dsiclk(u8 n, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(PRCM_DSI_PLLOUT_SEL);
|
|
val &= ~dsiclk[n].divsel_mask;
|
|
val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) <<
|
|
dsiclk[n].divsel_shift);
|
|
writel(val, PRCM_DSI_PLLOUT_SEL);
|
|
return 0;
|
|
}
|
|
|
|
static int request_dsiescclk(u8 n, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(PRCM_DSITVCLK_DIV);
|
|
enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en);
|
|
writel(val, PRCM_DSITVCLK_DIV);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
|
|
* @clock: The clock for which the request is made.
|
|
* @enable: Whether the clock should be enabled (true) or disabled (false).
|
|
*
|
|
* This function should only be used by the clock implementation.
|
|
* Do not use it from any other place!
|
|
*/
|
|
int db8500_prcmu_request_clock(u8 clock, bool enable)
|
|
{
|
|
if (clock == PRCMU_SGACLK)
|
|
return request_sga_clock(clock, enable);
|
|
else if (clock < PRCMU_NUM_REG_CLOCKS)
|
|
return request_clock(clock, enable);
|
|
else if (clock == PRCMU_TIMCLK)
|
|
return request_timclk(enable);
|
|
else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
|
|
return request_dsiclk((clock - PRCMU_DSI0CLK), enable);
|
|
else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
|
|
return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable);
|
|
else if (clock == PRCMU_PLLDSI)
|
|
return request_plldsi(enable);
|
|
else if (clock == PRCMU_SYSCLK)
|
|
return request_sysclk(enable);
|
|
else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1))
|
|
return request_pll(clock, enable);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
|
|
int branch)
|
|
{
|
|
u64 rate;
|
|
u32 val;
|
|
u32 d;
|
|
u32 div = 1;
|
|
|
|
val = readl(reg);
|
|
|
|
rate = src_rate;
|
|
rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT);
|
|
|
|
d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT);
|
|
if (d > 1)
|
|
div *= d;
|
|
|
|
d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT);
|
|
if (d > 1)
|
|
div *= d;
|
|
|
|
if (val & PRCM_PLL_FREQ_SELDIV2)
|
|
div *= 2;
|
|
|
|
if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
|
|
(val & PRCM_PLL_FREQ_DIV2EN) &&
|
|
((reg == PRCM_PLLSOC0_FREQ) ||
|
|
(reg == PRCM_PLLARM_FREQ) ||
|
|
(reg == PRCM_PLLDDR_FREQ))))
|
|
div *= 2;
|
|
|
|
(void)do_div(rate, div);
|
|
|
|
return (unsigned long)rate;
|
|
}
|
|
|
|
#define ROOT_CLOCK_RATE 38400000
|
|
|
|
static unsigned long clock_rate(u8 clock)
|
|
{
|
|
u32 val;
|
|
u32 pllsw;
|
|
unsigned long rate = ROOT_CLOCK_RATE;
|
|
|
|
val = readl(prcmu_base + clk_mgt[clock].offset);
|
|
|
|
if (val & PRCM_CLK_MGT_CLK38) {
|
|
if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
|
|
rate /= 2;
|
|
return rate;
|
|
}
|
|
|
|
val |= clk_mgt[clock].pllsw;
|
|
pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
|
|
|
|
if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0)
|
|
rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch);
|
|
else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1)
|
|
rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch);
|
|
else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR)
|
|
rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch);
|
|
else
|
|
return 0;
|
|
|
|
if ((clock == PRCMU_SGACLK) &&
|
|
(val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) {
|
|
u64 r = (rate * 10);
|
|
|
|
(void)do_div(r, 25);
|
|
return (unsigned long)r;
|
|
}
|
|
val &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
|
|
if (val)
|
|
return rate / val;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long armss_rate(void)
|
|
{
|
|
u32 r;
|
|
unsigned long rate;
|
|
|
|
r = readl(PRCM_ARM_CHGCLKREQ);
|
|
|
|
if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) {
|
|
/* External ARMCLKFIX clock */
|
|
|
|
rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX);
|
|
|
|
/* Check PRCM_ARM_CHGCLKREQ divider */
|
|
if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL))
|
|
rate /= 2;
|
|
|
|
/* Check PRCM_ARMCLKFIX_MGT divider */
|
|
r = readl(PRCM_ARMCLKFIX_MGT);
|
|
r &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
|
|
rate /= r;
|
|
|
|
} else {/* ARM PLL */
|
|
rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
static unsigned long dsiclk_rate(u8 n)
|
|
{
|
|
u32 divsel;
|
|
u32 div = 1;
|
|
|
|
divsel = readl(PRCM_DSI_PLLOUT_SEL);
|
|
divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift);
|
|
|
|
if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
|
|
divsel = dsiclk[n].divsel;
|
|
else
|
|
dsiclk[n].divsel = divsel;
|
|
|
|
switch (divsel) {
|
|
case PRCM_DSI_PLLOUT_SEL_PHI_4:
|
|
div *= 2;
|
|
case PRCM_DSI_PLLOUT_SEL_PHI_2:
|
|
div *= 2;
|
|
case PRCM_DSI_PLLOUT_SEL_PHI:
|
|
return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
|
|
PLL_RAW) / div;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static unsigned long dsiescclk_rate(u8 n)
|
|
{
|
|
u32 div;
|
|
|
|
div = readl(PRCM_DSITVCLK_DIV);
|
|
div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift));
|
|
return clock_rate(PRCMU_TVCLK) / max((u32)1, div);
|
|
}
|
|
|
|
unsigned long prcmu_clock_rate(u8 clock)
|
|
{
|
|
if (clock < PRCMU_NUM_REG_CLOCKS)
|
|
return clock_rate(clock);
|
|
else if (clock == PRCMU_TIMCLK)
|
|
return ROOT_CLOCK_RATE / 16;
|
|
else if (clock == PRCMU_SYSCLK)
|
|
return ROOT_CLOCK_RATE;
|
|
else if (clock == PRCMU_PLLSOC0)
|
|
return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
|
|
else if (clock == PRCMU_PLLSOC1)
|
|
return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
|
|
else if (clock == PRCMU_ARMSS)
|
|
return armss_rate();
|
|
else if (clock == PRCMU_PLLDDR)
|
|
return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
|
|
else if (clock == PRCMU_PLLDSI)
|
|
return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
|
|
PLL_RAW);
|
|
else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
|
|
return dsiclk_rate(clock - PRCMU_DSI0CLK);
|
|
else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
|
|
return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long clock_source_rate(u32 clk_mgt_val, int branch)
|
|
{
|
|
if (clk_mgt_val & PRCM_CLK_MGT_CLK38)
|
|
return ROOT_CLOCK_RATE;
|
|
clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK;
|
|
if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0)
|
|
return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch);
|
|
else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1)
|
|
return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch);
|
|
else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR)
|
|
return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static u32 clock_divider(unsigned long src_rate, unsigned long rate)
|
|
{
|
|
u32 div;
|
|
|
|
div = (src_rate / rate);
|
|
if (div == 0)
|
|
return 1;
|
|
if (rate < (src_rate / div))
|
|
div++;
|
|
return div;
|
|
}
|
|
|
|
static long round_clock_rate(u8 clock, unsigned long rate)
|
|
{
|
|
u32 val;
|
|
u32 div;
|
|
unsigned long src_rate;
|
|
long rounded_rate;
|
|
|
|
val = readl(prcmu_base + clk_mgt[clock].offset);
|
|
src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
|
|
clk_mgt[clock].branch);
|
|
div = clock_divider(src_rate, rate);
|
|
if (val & PRCM_CLK_MGT_CLK38) {
|
|
if (clk_mgt[clock].clk38div) {
|
|
if (div > 2)
|
|
div = 2;
|
|
} else {
|
|
div = 1;
|
|
}
|
|
} else if ((clock == PRCMU_SGACLK) && (div == 3)) {
|
|
u64 r = (src_rate * 10);
|
|
|
|
(void)do_div(r, 25);
|
|
if (r <= rate)
|
|
return (unsigned long)r;
|
|
}
|
|
rounded_rate = (src_rate / min(div, (u32)31));
|
|
|
|
return rounded_rate;
|
|
}
|
|
|
|
/* CPU FREQ table, may be changed due to if MAX_OPP is supported. */
|
|
static struct cpufreq_frequency_table db8500_cpufreq_table[] = {
|
|
{ .frequency = 200000, .driver_data = ARM_EXTCLK,},
|
|
{ .frequency = 400000, .driver_data = ARM_50_OPP,},
|
|
{ .frequency = 800000, .driver_data = ARM_100_OPP,},
|
|
{ .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */
|
|
{ .frequency = CPUFREQ_TABLE_END,},
|
|
};
|
|
|
|
static long round_armss_rate(unsigned long rate)
|
|
{
|
|
struct cpufreq_frequency_table *pos;
|
|
long freq = 0;
|
|
|
|
/* cpufreq table frequencies is in KHz. */
|
|
rate = rate / 1000;
|
|
|
|
/* Find the corresponding arm opp from the cpufreq table. */
|
|
cpufreq_for_each_entry(pos, db8500_cpufreq_table) {
|
|
freq = pos->frequency;
|
|
if (freq == rate)
|
|
break;
|
|
}
|
|
|
|
/* Return the last valid value, even if a match was not found. */
|
|
return freq * 1000;
|
|
}
|
|
|
|
#define MIN_PLL_VCO_RATE 600000000ULL
|
|
#define MAX_PLL_VCO_RATE 1680640000ULL
|
|
|
|
static long round_plldsi_rate(unsigned long rate)
|
|
{
|
|
long rounded_rate = 0;
|
|
unsigned long src_rate;
|
|
unsigned long rem;
|
|
u32 r;
|
|
|
|
src_rate = clock_rate(PRCMU_HDMICLK);
|
|
rem = rate;
|
|
|
|
for (r = 7; (rem > 0) && (r > 0); r--) {
|
|
u64 d;
|
|
|
|
d = (r * rate);
|
|
(void)do_div(d, src_rate);
|
|
if (d < 6)
|
|
d = 6;
|
|
else if (d > 255)
|
|
d = 255;
|
|
d *= src_rate;
|
|
if (((2 * d) < (r * MIN_PLL_VCO_RATE)) ||
|
|
((r * MAX_PLL_VCO_RATE) < (2 * d)))
|
|
continue;
|
|
(void)do_div(d, r);
|
|
if (rate < d) {
|
|
if (rounded_rate == 0)
|
|
rounded_rate = (long)d;
|
|
break;
|
|
}
|
|
if ((rate - d) < rem) {
|
|
rem = (rate - d);
|
|
rounded_rate = (long)d;
|
|
}
|
|
}
|
|
return rounded_rate;
|
|
}
|
|
|
|
static long round_dsiclk_rate(unsigned long rate)
|
|
{
|
|
u32 div;
|
|
unsigned long src_rate;
|
|
long rounded_rate;
|
|
|
|
src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
|
|
PLL_RAW);
|
|
div = clock_divider(src_rate, rate);
|
|
rounded_rate = (src_rate / ((div > 2) ? 4 : div));
|
|
|
|
return rounded_rate;
|
|
}
|
|
|
|
static long round_dsiescclk_rate(unsigned long rate)
|
|
{
|
|
u32 div;
|
|
unsigned long src_rate;
|
|
long rounded_rate;
|
|
|
|
src_rate = clock_rate(PRCMU_TVCLK);
|
|
div = clock_divider(src_rate, rate);
|
|
rounded_rate = (src_rate / min(div, (u32)255));
|
|
|
|
return rounded_rate;
|
|
}
|
|
|
|
long prcmu_round_clock_rate(u8 clock, unsigned long rate)
|
|
{
|
|
if (clock < PRCMU_NUM_REG_CLOCKS)
|
|
return round_clock_rate(clock, rate);
|
|
else if (clock == PRCMU_ARMSS)
|
|
return round_armss_rate(rate);
|
|
else if (clock == PRCMU_PLLDSI)
|
|
return round_plldsi_rate(rate);
|
|
else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
|
|
return round_dsiclk_rate(rate);
|
|
else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
|
|
return round_dsiescclk_rate(rate);
|
|
else
|
|
return (long)prcmu_clock_rate(clock);
|
|
}
|
|
|
|
static void set_clock_rate(u8 clock, unsigned long rate)
|
|
{
|
|
u32 val;
|
|
u32 div;
|
|
unsigned long src_rate;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&clk_mgt_lock, flags);
|
|
|
|
/* Grab the HW semaphore. */
|
|
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
|
|
cpu_relax();
|
|
|
|
val = readl(prcmu_base + clk_mgt[clock].offset);
|
|
src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
|
|
clk_mgt[clock].branch);
|
|
div = clock_divider(src_rate, rate);
|
|
if (val & PRCM_CLK_MGT_CLK38) {
|
|
if (clk_mgt[clock].clk38div) {
|
|
if (div > 1)
|
|
val |= PRCM_CLK_MGT_CLK38DIV;
|
|
else
|
|
val &= ~PRCM_CLK_MGT_CLK38DIV;
|
|
}
|
|
} else if (clock == PRCMU_SGACLK) {
|
|
val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK |
|
|
PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN);
|
|
if (div == 3) {
|
|
u64 r = (src_rate * 10);
|
|
|
|
(void)do_div(r, 25);
|
|
if (r <= rate) {
|
|
val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN;
|
|
div = 0;
|
|
}
|
|
}
|
|
val |= min(div, (u32)31);
|
|
} else {
|
|
val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
|
|
val |= min(div, (u32)31);
|
|
}
|
|
writel(val, prcmu_base + clk_mgt[clock].offset);
|
|
|
|
/* Release the HW semaphore. */
|
|
writel(0, PRCM_SEM);
|
|
|
|
spin_unlock_irqrestore(&clk_mgt_lock, flags);
|
|
}
|
|
|
|
static int set_armss_rate(unsigned long rate)
|
|
{
|
|
struct cpufreq_frequency_table *pos;
|
|
|
|
/* cpufreq table frequencies is in KHz. */
|
|
rate = rate / 1000;
|
|
|
|
/* Find the corresponding arm opp from the cpufreq table. */
|
|
cpufreq_for_each_entry(pos, db8500_cpufreq_table)
|
|
if (pos->frequency == rate)
|
|
break;
|
|
|
|
if (pos->frequency != rate)
|
|
return -EINVAL;
|
|
|
|
/* Set the new arm opp. */
|
|
return db8500_prcmu_set_arm_opp(pos->driver_data);
|
|
}
|
|
|
|
static int set_plldsi_rate(unsigned long rate)
|
|
{
|
|
unsigned long src_rate;
|
|
unsigned long rem;
|
|
u32 pll_freq = 0;
|
|
u32 r;
|
|
|
|
src_rate = clock_rate(PRCMU_HDMICLK);
|
|
rem = rate;
|
|
|
|
for (r = 7; (rem > 0) && (r > 0); r--) {
|
|
u64 d;
|
|
u64 hwrate;
|
|
|
|
d = (r * rate);
|
|
(void)do_div(d, src_rate);
|
|
if (d < 6)
|
|
d = 6;
|
|
else if (d > 255)
|
|
d = 255;
|
|
hwrate = (d * src_rate);
|
|
if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) ||
|
|
((r * MAX_PLL_VCO_RATE) < (2 * hwrate)))
|
|
continue;
|
|
(void)do_div(hwrate, r);
|
|
if (rate < hwrate) {
|
|
if (pll_freq == 0)
|
|
pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
|
|
(r << PRCM_PLL_FREQ_R_SHIFT));
|
|
break;
|
|
}
|
|
if ((rate - hwrate) < rem) {
|
|
rem = (rate - hwrate);
|
|
pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
|
|
(r << PRCM_PLL_FREQ_R_SHIFT));
|
|
}
|
|
}
|
|
if (pll_freq == 0)
|
|
return -EINVAL;
|
|
|
|
pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT);
|
|
writel(pll_freq, PRCM_PLLDSI_FREQ);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_dsiclk_rate(u8 n, unsigned long rate)
|
|
{
|
|
u32 val;
|
|
u32 div;
|
|
|
|
div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ,
|
|
clock_rate(PRCMU_HDMICLK), PLL_RAW), rate);
|
|
|
|
dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI :
|
|
(div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 :
|
|
/* else */ PRCM_DSI_PLLOUT_SEL_PHI_4;
|
|
|
|
val = readl(PRCM_DSI_PLLOUT_SEL);
|
|
val &= ~dsiclk[n].divsel_mask;
|
|
val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift);
|
|
writel(val, PRCM_DSI_PLLOUT_SEL);
|
|
}
|
|
|
|
static void set_dsiescclk_rate(u8 n, unsigned long rate)
|
|
{
|
|
u32 val;
|
|
u32 div;
|
|
|
|
div = clock_divider(clock_rate(PRCMU_TVCLK), rate);
|
|
val = readl(PRCM_DSITVCLK_DIV);
|
|
val &= ~dsiescclk[n].div_mask;
|
|
val |= (min(div, (u32)255) << dsiescclk[n].div_shift);
|
|
writel(val, PRCM_DSITVCLK_DIV);
|
|
}
|
|
|
|
int prcmu_set_clock_rate(u8 clock, unsigned long rate)
|
|
{
|
|
if (clock < PRCMU_NUM_REG_CLOCKS)
|
|
set_clock_rate(clock, rate);
|
|
else if (clock == PRCMU_ARMSS)
|
|
return set_armss_rate(rate);
|
|
else if (clock == PRCMU_PLLDSI)
|
|
return set_plldsi_rate(rate);
|
|
else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
|
|
set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate);
|
|
else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
|
|
set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate);
|
|
return 0;
|
|
}
|
|
|
|
int db8500_prcmu_config_esram0_deep_sleep(u8 state)
|
|
{
|
|
if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
|
|
(state < ESRAM0_DEEP_SLEEP_STATE_OFF))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON),
|
|
(tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE));
|
|
writeb(DDR_PWR_STATE_ON,
|
|
(tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
|
|
writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
|
|
|
|
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int db8500_prcmu_config_hotdog(u8 threshold)
|
|
{
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
|
|
writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
|
|
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int db8500_prcmu_config_hotmon(u8 low, u8 high)
|
|
{
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
|
|
writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH));
|
|
writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH),
|
|
(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
|
|
writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
|
|
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int config_hot_period(u16 val)
|
|
{
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
|
|
writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
|
|
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int db8500_prcmu_start_temp_sense(u16 cycles32k)
|
|
{
|
|
if (cycles32k == 0xFFFF)
|
|
return -EINVAL;
|
|
|
|
return config_hot_period(cycles32k);
|
|
}
|
|
|
|
int db8500_prcmu_stop_temp_sense(void)
|
|
{
|
|
return config_hot_period(0xFFFF);
|
|
}
|
|
|
|
static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
|
|
{
|
|
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
|
|
writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
|
|
writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
|
|
writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
|
|
|
|
writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
|
|
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
|
|
{
|
|
BUG_ON(num == 0 || num > 0xf);
|
|
return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
|
|
sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
|
|
A9WDOG_AUTO_OFF_DIS);
|
|
}
|
|
EXPORT_SYMBOL(db8500_prcmu_config_a9wdog);
|
|
|
|
int db8500_prcmu_enable_a9wdog(u8 id)
|
|
{
|
|
return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
|
|
}
|
|
EXPORT_SYMBOL(db8500_prcmu_enable_a9wdog);
|
|
|
|
int db8500_prcmu_disable_a9wdog(u8 id)
|
|
{
|
|
return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
|
|
}
|
|
EXPORT_SYMBOL(db8500_prcmu_disable_a9wdog);
|
|
|
|
int db8500_prcmu_kick_a9wdog(u8 id)
|
|
{
|
|
return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
|
|
}
|
|
EXPORT_SYMBOL(db8500_prcmu_kick_a9wdog);
|
|
|
|
/*
|
|
* timeout is 28 bit, in ms.
|
|
*/
|
|
int db8500_prcmu_load_a9wdog(u8 id, u32 timeout)
|
|
{
|
|
return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
|
|
(id & A9WDOG_ID_MASK) |
|
|
/*
|
|
* Put the lowest 28 bits of timeout at
|
|
* offset 4. Four first bits are used for id.
|
|
*/
|
|
(u8)((timeout << 4) & 0xf0),
|
|
(u8)((timeout >> 4) & 0xff),
|
|
(u8)((timeout >> 12) & 0xff),
|
|
(u8)((timeout >> 20) & 0xff));
|
|
}
|
|
EXPORT_SYMBOL(db8500_prcmu_load_a9wdog);
|
|
|
|
/**
|
|
* prcmu_abb_read() - Read register value(s) from the ABB.
|
|
* @slave: The I2C slave address.
|
|
* @reg: The (start) register address.
|
|
* @value: The read out value(s).
|
|
* @size: The number of registers to read.
|
|
*
|
|
* Reads register value(s) from the ABB.
|
|
* @size has to be 1 for the current firmware version.
|
|
*/
|
|
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
int r;
|
|
|
|
if (size != 1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb5_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
|
|
cpu_relax();
|
|
|
|
writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
|
|
writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
|
|
writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
|
|
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
|
|
writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
|
|
|
|
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
|
|
|
|
if (!wait_for_completion_timeout(&mb5_transfer.work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
} else {
|
|
r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
|
|
}
|
|
|
|
if (!r)
|
|
*value = mb5_transfer.ack.value;
|
|
|
|
mutex_unlock(&mb5_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_abb_write_masked() - Write masked register value(s) to the ABB.
|
|
* @slave: The I2C slave address.
|
|
* @reg: The (start) register address.
|
|
* @value: The value(s) to write.
|
|
* @mask: The mask(s) to use.
|
|
* @size: The number of registers to write.
|
|
*
|
|
* Writes masked register value(s) to the ABB.
|
|
* For each @value, only the bits set to 1 in the corresponding @mask
|
|
* will be written. The other bits are not changed.
|
|
* @size has to be 1 for the current firmware version.
|
|
*/
|
|
int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size)
|
|
{
|
|
int r;
|
|
|
|
if (size != 1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb5_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
|
|
cpu_relax();
|
|
|
|
writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
|
|
writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
|
|
writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
|
|
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
|
|
writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
|
|
|
|
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
|
|
|
|
if (!wait_for_completion_timeout(&mb5_transfer.work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
} else {
|
|
r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
|
|
}
|
|
|
|
mutex_unlock(&mb5_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_abb_write() - Write register value(s) to the ABB.
|
|
* @slave: The I2C slave address.
|
|
* @reg: The (start) register address.
|
|
* @value: The value(s) to write.
|
|
* @size: The number of registers to write.
|
|
*
|
|
* Writes register value(s) to the ABB.
|
|
* @size has to be 1 for the current firmware version.
|
|
*/
|
|
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
u8 mask = ~0;
|
|
|
|
return prcmu_abb_write_masked(slave, reg, value, &mask, size);
|
|
}
|
|
|
|
/**
|
|
* prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
|
|
*/
|
|
int prcmu_ac_wake_req(void)
|
|
{
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&mb0_transfer.ac_wake_lock);
|
|
|
|
val = readl(PRCM_HOSTACCESS_REQ);
|
|
if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
|
|
goto unlock_and_return;
|
|
|
|
atomic_set(&ac_wake_req_state, 1);
|
|
|
|
/*
|
|
* Force Modem Wake-up before hostaccess_req ping-pong.
|
|
* It prevents Modem to enter in Sleep while acking the hostaccess
|
|
* request. The 31us delay has been calculated by HWI.
|
|
*/
|
|
val |= PRCM_HOSTACCESS_REQ_WAKE_REQ;
|
|
writel(val, PRCM_HOSTACCESS_REQ);
|
|
|
|
udelay(31);
|
|
|
|
val |= PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ;
|
|
writel(val, PRCM_HOSTACCESS_REQ);
|
|
|
|
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
|
|
msecs_to_jiffies(5000))) {
|
|
pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
|
|
__func__);
|
|
ret = -EFAULT;
|
|
}
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb0_transfer.ac_wake_lock);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem
|
|
*/
|
|
void prcmu_ac_sleep_req(void)
|
|
{
|
|
u32 val;
|
|
|
|
mutex_lock(&mb0_transfer.ac_wake_lock);
|
|
|
|
val = readl(PRCM_HOSTACCESS_REQ);
|
|
if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
|
|
goto unlock_and_return;
|
|
|
|
writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
|
|
PRCM_HOSTACCESS_REQ);
|
|
|
|
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
|
|
msecs_to_jiffies(5000))) {
|
|
pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
|
|
__func__);
|
|
}
|
|
|
|
atomic_set(&ac_wake_req_state, 0);
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb0_transfer.ac_wake_lock);
|
|
}
|
|
|
|
bool db8500_prcmu_is_ac_wake_requested(void)
|
|
{
|
|
return (atomic_read(&ac_wake_req_state) != 0);
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_system_reset - System reset
|
|
*
|
|
* Saves the reset reason code and then sets the APE_SOFTRST register which
|
|
* fires interrupt to fw
|
|
*/
|
|
void db8500_prcmu_system_reset(u16 reset_code)
|
|
{
|
|
writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
|
|
writel(1, PRCM_APE_SOFTRST);
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_get_reset_code - Retrieve SW reset reason code
|
|
*
|
|
* Retrieves the reset reason code stored by prcmu_system_reset() before
|
|
* last restart.
|
|
*/
|
|
u16 db8500_prcmu_get_reset_code(void)
|
|
{
|
|
return readw(tcdm_base + PRCM_SW_RST_REASON);
|
|
}
|
|
|
|
/**
|
|
* db8500_prcmu_reset_modem - ask the PRCMU to reset modem
|
|
*/
|
|
void db8500_prcmu_modem_reset(void)
|
|
{
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
/*
|
|
* No need to check return from PRCMU as modem should go in reset state
|
|
* This state is already managed by upper layer
|
|
*/
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
}
|
|
|
|
static void ack_dbb_wakeup(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
|
|
cpu_relax();
|
|
|
|
writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
|
|
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
static inline void print_unknown_header_warning(u8 n, u8 header)
|
|
{
|
|
pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
|
|
header, n);
|
|
}
|
|
|
|
static bool read_mailbox_0(void)
|
|
{
|
|
bool r;
|
|
u32 ev;
|
|
unsigned int n;
|
|
u8 header;
|
|
|
|
header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0);
|
|
switch (header) {
|
|
case MB0H_WAKEUP_EXE:
|
|
case MB0H_WAKEUP_SLEEP:
|
|
if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
|
|
ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500);
|
|
else
|
|
ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500);
|
|
|
|
if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK))
|
|
complete(&mb0_transfer.ac_wake_work);
|
|
if (ev & WAKEUP_BIT_SYSCLK_OK)
|
|
complete(&mb3_transfer.sysclk_work);
|
|
|
|
ev &= mb0_transfer.req.dbb_irqs;
|
|
|
|
for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
|
|
if (ev & prcmu_irq_bit[n])
|
|
generic_handle_irq(irq_find_mapping(db8500_irq_domain, n));
|
|
}
|
|
r = true;
|
|
break;
|
|
default:
|
|
print_unknown_header_warning(0, header);
|
|
r = false;
|
|
break;
|
|
}
|
|
writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
|
|
return r;
|
|
}
|
|
|
|
static bool read_mailbox_1(void)
|
|
{
|
|
mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1);
|
|
mb1_transfer.ack.arm_opp = readb(tcdm_base +
|
|
PRCM_ACK_MB1_CURRENT_ARM_OPP);
|
|
mb1_transfer.ack.ape_opp = readb(tcdm_base +
|
|
PRCM_ACK_MB1_CURRENT_APE_OPP);
|
|
mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
|
|
PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
|
|
writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
|
|
complete(&mb1_transfer.work);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_2(void)
|
|
{
|
|
mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
|
|
writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
|
|
complete(&mb2_transfer.work);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_3(void)
|
|
{
|
|
writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_4(void)
|
|
{
|
|
u8 header;
|
|
bool do_complete = true;
|
|
|
|
header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4);
|
|
switch (header) {
|
|
case MB4H_MEM_ST:
|
|
case MB4H_HOTDOG:
|
|
case MB4H_HOTMON:
|
|
case MB4H_HOT_PERIOD:
|
|
case MB4H_A9WDOG_CONF:
|
|
case MB4H_A9WDOG_EN:
|
|
case MB4H_A9WDOG_DIS:
|
|
case MB4H_A9WDOG_LOAD:
|
|
case MB4H_A9WDOG_KICK:
|
|
break;
|
|
default:
|
|
print_unknown_header_warning(4, header);
|
|
do_complete = false;
|
|
break;
|
|
}
|
|
|
|
writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
|
|
|
|
if (do_complete)
|
|
complete(&mb4_transfer.work);
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_5(void)
|
|
{
|
|
mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
|
|
mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
|
|
writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
|
|
complete(&mb5_transfer.work);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_6(void)
|
|
{
|
|
writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_7(void)
|
|
{
|
|
writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
|
|
return false;
|
|
}
|
|
|
|
static bool (* const read_mailbox[NUM_MB])(void) = {
|
|
read_mailbox_0,
|
|
read_mailbox_1,
|
|
read_mailbox_2,
|
|
read_mailbox_3,
|
|
read_mailbox_4,
|
|
read_mailbox_5,
|
|
read_mailbox_6,
|
|
read_mailbox_7
|
|
};
|
|
|
|
static irqreturn_t prcmu_irq_handler(int irq, void *data)
|
|
{
|
|
u32 bits;
|
|
u8 n;
|
|
irqreturn_t r;
|
|
|
|
bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
|
|
if (unlikely(!bits))
|
|
return IRQ_NONE;
|
|
|
|
r = IRQ_HANDLED;
|
|
for (n = 0; bits; n++) {
|
|
if (bits & MBOX_BIT(n)) {
|
|
bits -= MBOX_BIT(n);
|
|
if (read_mailbox[n]())
|
|
r = IRQ_WAKE_THREAD;
|
|
}
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
|
|
{
|
|
ack_dbb_wakeup();
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void prcmu_mask_work(struct work_struct *work)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
config_wakeups();
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
static void prcmu_irq_mask(struct irq_data *d)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->hwirq];
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
if (d->irq != IRQ_PRCMU_CA_SLEEP)
|
|
schedule_work(&mb0_transfer.mask_work);
|
|
}
|
|
|
|
static void prcmu_irq_unmask(struct irq_data *d)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->hwirq];
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
if (d->irq != IRQ_PRCMU_CA_SLEEP)
|
|
schedule_work(&mb0_transfer.mask_work);
|
|
}
|
|
|
|
static void noop(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static struct irq_chip prcmu_irq_chip = {
|
|
.name = "prcmu",
|
|
.irq_disable = prcmu_irq_mask,
|
|
.irq_ack = noop,
|
|
.irq_mask = prcmu_irq_mask,
|
|
.irq_unmask = prcmu_irq_unmask,
|
|
};
|
|
|
|
static __init char *fw_project_name(u32 project)
|
|
{
|
|
switch (project) {
|
|
case PRCMU_FW_PROJECT_U8500:
|
|
return "U8500";
|
|
case PRCMU_FW_PROJECT_U8400:
|
|
return "U8400";
|
|
case PRCMU_FW_PROJECT_U9500:
|
|
return "U9500";
|
|
case PRCMU_FW_PROJECT_U8500_MBB:
|
|
return "U8500 MBB";
|
|
case PRCMU_FW_PROJECT_U8500_C1:
|
|
return "U8500 C1";
|
|
case PRCMU_FW_PROJECT_U8500_C2:
|
|
return "U8500 C2";
|
|
case PRCMU_FW_PROJECT_U8500_C3:
|
|
return "U8500 C3";
|
|
case PRCMU_FW_PROJECT_U8500_C4:
|
|
return "U8500 C4";
|
|
case PRCMU_FW_PROJECT_U9500_MBL:
|
|
return "U9500 MBL";
|
|
case PRCMU_FW_PROJECT_U8500_MBL:
|
|
return "U8500 MBL";
|
|
case PRCMU_FW_PROJECT_U8500_MBL2:
|
|
return "U8500 MBL2";
|
|
case PRCMU_FW_PROJECT_U8520:
|
|
return "U8520 MBL";
|
|
case PRCMU_FW_PROJECT_U8420:
|
|
return "U8420";
|
|
case PRCMU_FW_PROJECT_U9540:
|
|
return "U9540";
|
|
case PRCMU_FW_PROJECT_A9420:
|
|
return "A9420";
|
|
case PRCMU_FW_PROJECT_L8540:
|
|
return "L8540";
|
|
case PRCMU_FW_PROJECT_L8580:
|
|
return "L8580";
|
|
default:
|
|
return "Unknown";
|
|
}
|
|
}
|
|
|
|
static int db8500_irq_map(struct irq_domain *d, unsigned int virq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
irq_set_chip_and_handler(virq, &prcmu_irq_chip,
|
|
handle_simple_irq);
|
|
set_irq_flags(virq, IRQF_VALID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops db8500_irq_ops = {
|
|
.map = db8500_irq_map,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
static int db8500_irq_init(struct device_node *np)
|
|
{
|
|
int i;
|
|
|
|
db8500_irq_domain = irq_domain_add_simple(
|
|
np, NUM_PRCMU_WAKEUPS, 0,
|
|
&db8500_irq_ops, NULL);
|
|
|
|
if (!db8500_irq_domain) {
|
|
pr_err("Failed to create irqdomain\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
/* All wakeups will be used, so create mappings for all */
|
|
for (i = 0; i < NUM_PRCMU_WAKEUPS; i++)
|
|
irq_create_mapping(db8500_irq_domain, i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dbx500_fw_version_init(struct platform_device *pdev,
|
|
u32 version_offset)
|
|
{
|
|
struct resource *res;
|
|
void __iomem *tcpm_base;
|
|
u32 version;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"prcmu-tcpm");
|
|
if (!res) {
|
|
dev_err(&pdev->dev,
|
|
"Error: no prcmu tcpm memory region provided\n");
|
|
return;
|
|
}
|
|
tcpm_base = ioremap(res->start, resource_size(res));
|
|
if (!tcpm_base) {
|
|
dev_err(&pdev->dev, "no prcmu tcpm mem region provided\n");
|
|
return;
|
|
}
|
|
|
|
version = readl(tcpm_base + version_offset);
|
|
fw_info.version.project = (version & 0xFF);
|
|
fw_info.version.api_version = (version >> 8) & 0xFF;
|
|
fw_info.version.func_version = (version >> 16) & 0xFF;
|
|
fw_info.version.errata = (version >> 24) & 0xFF;
|
|
strncpy(fw_info.version.project_name,
|
|
fw_project_name(fw_info.version.project),
|
|
PRCMU_FW_PROJECT_NAME_LEN);
|
|
fw_info.valid = true;
|
|
pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
|
|
fw_info.version.project_name,
|
|
fw_info.version.project,
|
|
fw_info.version.api_version,
|
|
fw_info.version.func_version,
|
|
fw_info.version.errata);
|
|
iounmap(tcpm_base);
|
|
}
|
|
|
|
void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
|
|
{
|
|
/*
|
|
* This is a temporary remap to bring up the clocks. It is
|
|
* subsequently replaces with a real remap. After the merge of
|
|
* the mailbox subsystem all of this early code goes away, and the
|
|
* clock driver can probe independently. An early initcall will
|
|
* still be needed, but it can be diverted into drivers/clk/ux500.
|
|
*/
|
|
prcmu_base = ioremap(phy_base, size);
|
|
if (!prcmu_base)
|
|
pr_err("%s: ioremap() of prcmu registers failed!\n", __func__);
|
|
|
|
spin_lock_init(&mb0_transfer.lock);
|
|
spin_lock_init(&mb0_transfer.dbb_irqs_lock);
|
|
mutex_init(&mb0_transfer.ac_wake_lock);
|
|
init_completion(&mb0_transfer.ac_wake_work);
|
|
mutex_init(&mb1_transfer.lock);
|
|
init_completion(&mb1_transfer.work);
|
|
mb1_transfer.ape_opp = APE_NO_CHANGE;
|
|
mutex_init(&mb2_transfer.lock);
|
|
init_completion(&mb2_transfer.work);
|
|
spin_lock_init(&mb2_transfer.auto_pm_lock);
|
|
spin_lock_init(&mb3_transfer.lock);
|
|
mutex_init(&mb3_transfer.sysclk_lock);
|
|
init_completion(&mb3_transfer.sysclk_work);
|
|
mutex_init(&mb4_transfer.lock);
|
|
init_completion(&mb4_transfer.work);
|
|
mutex_init(&mb5_transfer.lock);
|
|
init_completion(&mb5_transfer.work);
|
|
|
|
INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
|
|
}
|
|
|
|
static void __init init_prcm_registers(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(PRCM_A9PL_FORCE_CLKEN);
|
|
val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
|
|
PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
|
|
writel(val, (PRCM_A9PL_FORCE_CLKEN));
|
|
}
|
|
|
|
/*
|
|
* Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
|
|
*/
|
|
static struct regulator_consumer_supply db8500_vape_consumers[] = {
|
|
REGULATOR_SUPPLY("v-ape", NULL),
|
|
REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"),
|
|
REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"),
|
|
REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"),
|
|
REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"),
|
|
REGULATOR_SUPPLY("v-i2c", "nmk-i2c.4"),
|
|
/* "v-mmc" changed to "vcore" in the mainline kernel */
|
|
REGULATOR_SUPPLY("vcore", "sdi0"),
|
|
REGULATOR_SUPPLY("vcore", "sdi1"),
|
|
REGULATOR_SUPPLY("vcore", "sdi2"),
|
|
REGULATOR_SUPPLY("vcore", "sdi3"),
|
|
REGULATOR_SUPPLY("vcore", "sdi4"),
|
|
REGULATOR_SUPPLY("v-dma", "dma40.0"),
|
|
REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"),
|
|
/* "v-uart" changed to "vcore" in the mainline kernel */
|
|
REGULATOR_SUPPLY("vcore", "uart0"),
|
|
REGULATOR_SUPPLY("vcore", "uart1"),
|
|
REGULATOR_SUPPLY("vcore", "uart2"),
|
|
REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
|
|
REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"),
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
|
|
REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
|
|
/* AV8100 regulator */
|
|
REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
|
|
REGULATOR_SUPPLY("vsupply", "b2r2_bus"),
|
|
REGULATOR_SUPPLY("vsupply", "mcde"),
|
|
};
|
|
|
|
/* SVA MMDSP regulator switch */
|
|
static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
|
|
REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
|
|
};
|
|
|
|
/* SVA pipe regulator switch */
|
|
static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
|
|
REGULATOR_SUPPLY("sva-pipe", "cm_control"),
|
|
};
|
|
|
|
/* SIA MMDSP regulator switch */
|
|
static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
|
|
REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
|
|
};
|
|
|
|
/* SIA pipe regulator switch */
|
|
static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
|
|
REGULATOR_SUPPLY("sia-pipe", "cm_control"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply db8500_sga_consumers[] = {
|
|
REGULATOR_SUPPLY("v-mali", NULL),
|
|
};
|
|
|
|
/* ESRAM1 and 2 regulator switch */
|
|
static struct regulator_consumer_supply db8500_esram12_consumers[] = {
|
|
REGULATOR_SUPPLY("esram12", "cm_control"),
|
|
};
|
|
|
|
/* ESRAM3 and 4 regulator switch */
|
|
static struct regulator_consumer_supply db8500_esram34_consumers[] = {
|
|
REGULATOR_SUPPLY("v-esram34", "mcde"),
|
|
REGULATOR_SUPPLY("esram34", "cm_control"),
|
|
REGULATOR_SUPPLY("lcla_esram", "dma40.0"),
|
|
};
|
|
|
|
static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
|
|
[DB8500_REGULATOR_VAPE] = {
|
|
.constraints = {
|
|
.name = "db8500-vape",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.always_on = true,
|
|
},
|
|
.consumer_supplies = db8500_vape_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),
|
|
},
|
|
[DB8500_REGULATOR_VARM] = {
|
|
.constraints = {
|
|
.name = "db8500-varm",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_VMODEM] = {
|
|
.constraints = {
|
|
.name = "db8500-vmodem",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_VPLL] = {
|
|
.constraints = {
|
|
.name = "db8500-vpll",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_VSMPS1] = {
|
|
.constraints = {
|
|
.name = "db8500-vsmps1",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_VSMPS2] = {
|
|
.constraints = {
|
|
.name = "db8500-vsmps2",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_vsmps2_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers),
|
|
},
|
|
[DB8500_REGULATOR_VSMPS3] = {
|
|
.constraints = {
|
|
.name = "db8500-vsmps3",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_VRF1] = {
|
|
.constraints = {
|
|
.name = "db8500-vrf1",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
|
|
/* dependency to u8500-vape is handled outside regulator framework */
|
|
.constraints = {
|
|
.name = "db8500-sva-mmdsp",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_svammdsp_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
|
|
.constraints = {
|
|
/* "ret" means "retention" */
|
|
.name = "db8500-sva-mmdsp-ret",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_SVAPIPE] = {
|
|
/* dependency to u8500-vape is handled outside regulator framework */
|
|
.constraints = {
|
|
.name = "db8500-sva-pipe",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_svapipe_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
|
|
/* dependency to u8500-vape is handled outside regulator framework */
|
|
.constraints = {
|
|
.name = "db8500-sia-mmdsp",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_siammdsp_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
|
|
.constraints = {
|
|
.name = "db8500-sia-mmdsp-ret",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_SIAPIPE] = {
|
|
/* dependency to u8500-vape is handled outside regulator framework */
|
|
.constraints = {
|
|
.name = "db8500-sia-pipe",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_siapipe_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_SGA] = {
|
|
.supply_regulator = "db8500-vape",
|
|
.constraints = {
|
|
.name = "db8500-sga",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_sga_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
|
|
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
|
|
.supply_regulator = "db8500-vape",
|
|
.constraints = {
|
|
.name = "db8500-b2r2-mcde",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_b2r2_mcde_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_ESRAM12] = {
|
|
/*
|
|
* esram12 is set in retention and supplied by Vsafe when Vape is off,
|
|
* no need to hold Vape
|
|
*/
|
|
.constraints = {
|
|
.name = "db8500-esram12",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_esram12_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
|
|
.constraints = {
|
|
.name = "db8500-esram12-ret",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_ESRAM34] = {
|
|
/*
|
|
* esram34 is set in retention and supplied by Vsafe when Vape is off,
|
|
* no need to hold Vape
|
|
*/
|
|
.constraints = {
|
|
.name = "db8500-esram34",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = db8500_esram34_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
|
|
},
|
|
[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
|
|
.constraints = {
|
|
.name = "db8500-esram34-ret",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct ux500_wdt_data db8500_wdt_pdata = {
|
|
.timeout = 600, /* 10 minutes */
|
|
.has_28_bits_resolution = true,
|
|
};
|
|
/*
|
|
* Thermal Sensor
|
|
*/
|
|
|
|
static struct resource db8500_thsens_resources[] = {
|
|
{
|
|
.name = "IRQ_HOTMON_LOW",
|
|
.start = IRQ_PRCMU_HOTMON_LOW,
|
|
.end = IRQ_PRCMU_HOTMON_LOW,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "IRQ_HOTMON_HIGH",
|
|
.start = IRQ_PRCMU_HOTMON_HIGH,
|
|
.end = IRQ_PRCMU_HOTMON_HIGH,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct db8500_thsens_platform_data db8500_thsens_data = {
|
|
.trip_points[0] = {
|
|
.temp = 70000,
|
|
.type = THERMAL_TRIP_ACTIVE,
|
|
.cdev_name = {
|
|
[0] = "thermal-cpufreq-0",
|
|
},
|
|
},
|
|
.trip_points[1] = {
|
|
.temp = 75000,
|
|
.type = THERMAL_TRIP_ACTIVE,
|
|
.cdev_name = {
|
|
[0] = "thermal-cpufreq-0",
|
|
},
|
|
},
|
|
.trip_points[2] = {
|
|
.temp = 80000,
|
|
.type = THERMAL_TRIP_ACTIVE,
|
|
.cdev_name = {
|
|
[0] = "thermal-cpufreq-0",
|
|
},
|
|
},
|
|
.trip_points[3] = {
|
|
.temp = 85000,
|
|
.type = THERMAL_TRIP_CRITICAL,
|
|
},
|
|
.num_trips = 4,
|
|
};
|
|
|
|
static const struct mfd_cell common_prcmu_devs[] = {
|
|
{
|
|
.name = "ux500_wdt",
|
|
.platform_data = &db8500_wdt_pdata,
|
|
.pdata_size = sizeof(db8500_wdt_pdata),
|
|
.id = -1,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell db8500_prcmu_devs[] = {
|
|
{
|
|
.name = "db8500-prcmu-regulators",
|
|
.of_compatible = "stericsson,db8500-prcmu-regulator",
|
|
.platform_data = &db8500_regulators,
|
|
.pdata_size = sizeof(db8500_regulators),
|
|
},
|
|
{
|
|
.name = "cpufreq-ux500",
|
|
.of_compatible = "stericsson,cpufreq-ux500",
|
|
.platform_data = &db8500_cpufreq_table,
|
|
.pdata_size = sizeof(db8500_cpufreq_table),
|
|
},
|
|
{
|
|
.name = "cpuidle-dbx500",
|
|
.of_compatible = "stericsson,cpuidle-dbx500",
|
|
},
|
|
{
|
|
.name = "db8500-thermal",
|
|
.num_resources = ARRAY_SIZE(db8500_thsens_resources),
|
|
.resources = db8500_thsens_resources,
|
|
.platform_data = &db8500_thsens_data,
|
|
.pdata_size = sizeof(db8500_thsens_data),
|
|
},
|
|
};
|
|
|
|
static void db8500_prcmu_update_cpufreq(void)
|
|
{
|
|
if (prcmu_has_arm_maxopp()) {
|
|
db8500_cpufreq_table[3].frequency = 1000000;
|
|
db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP;
|
|
}
|
|
}
|
|
|
|
static int db8500_prcmu_register_ab8500(struct device *parent,
|
|
struct ab8500_platform_data *pdata)
|
|
{
|
|
struct device_node *np;
|
|
struct resource ab8500_resource;
|
|
const struct mfd_cell ab8500_cell = {
|
|
.name = "ab8500-core",
|
|
.of_compatible = "stericsson,ab8500",
|
|
.id = AB8500_VERSION_AB8500,
|
|
.platform_data = pdata,
|
|
.pdata_size = sizeof(struct ab8500_platform_data),
|
|
.resources = &ab8500_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
if (!parent->of_node)
|
|
return -ENODEV;
|
|
|
|
/* Look up the device node, sneak the IRQ out of it */
|
|
for_each_child_of_node(parent->of_node, np) {
|
|
if (of_device_is_compatible(np, ab8500_cell.of_compatible))
|
|
break;
|
|
}
|
|
if (!np) {
|
|
dev_info(parent, "could not find AB8500 node in the device tree\n");
|
|
return -ENODEV;
|
|
}
|
|
of_irq_to_resource_table(np, &ab8500_resource, 1);
|
|
|
|
return mfd_add_devices(parent, 0, &ab8500_cell, 1, NULL, 0, NULL);
|
|
}
|
|
|
|
/**
|
|
* prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
|
|
*
|
|
*/
|
|
static int db8500_prcmu_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
|
|
int irq = 0, err = 0;
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "no prcmu memory region provided\n");
|
|
return -EINVAL;
|
|
}
|
|
prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
|
|
if (!prcmu_base) {
|
|
dev_err(&pdev->dev,
|
|
"failed to ioremap prcmu register memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
init_prcm_registers();
|
|
dbx500_fw_version_init(pdev, pdata->version_offset);
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
|
|
return -EINVAL;
|
|
}
|
|
tcdm_base = devm_ioremap(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!tcdm_base) {
|
|
dev_err(&pdev->dev,
|
|
"failed to ioremap prcmu-tcdm register memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Clean up the mailbox interrupts after pre-kernel code. */
|
|
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(&pdev->dev, "no prcmu irq provided\n");
|
|
return irq;
|
|
}
|
|
|
|
err = request_threaded_irq(irq, prcmu_irq_handler,
|
|
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
|
|
if (err < 0) {
|
|
pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
|
|
return err;
|
|
}
|
|
|
|
db8500_irq_init(np);
|
|
|
|
prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
|
|
|
|
db8500_prcmu_update_cpufreq();
|
|
|
|
err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs,
|
|
ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain);
|
|
if (err) {
|
|
pr_err("prcmu: Failed to add subdevices\n");
|
|
return err;
|
|
}
|
|
|
|
/* TODO: Remove restriction when clk definitions are available. */
|
|
if (!of_machine_is_compatible("st-ericsson,u8540")) {
|
|
err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
|
|
ARRAY_SIZE(db8500_prcmu_devs), NULL, 0,
|
|
db8500_irq_domain);
|
|
if (err) {
|
|
mfd_remove_devices(&pdev->dev);
|
|
pr_err("prcmu: Failed to add subdevices\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata);
|
|
if (err) {
|
|
mfd_remove_devices(&pdev->dev);
|
|
pr_err("prcmu: Failed to add ab8500 subdevice\n");
|
|
return err;
|
|
}
|
|
|
|
pr_info("DB8500 PRCMU initialized\n");
|
|
return err;
|
|
}
|
|
static const struct of_device_id db8500_prcmu_match[] = {
|
|
{ .compatible = "stericsson,db8500-prcmu"},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver db8500_prcmu_driver = {
|
|
.driver = {
|
|
.name = "db8500-prcmu",
|
|
.of_match_table = db8500_prcmu_match,
|
|
},
|
|
.probe = db8500_prcmu_probe,
|
|
};
|
|
|
|
static int __init db8500_prcmu_init(void)
|
|
{
|
|
return platform_driver_register(&db8500_prcmu_driver);
|
|
}
|
|
|
|
core_initcall(db8500_prcmu_init);
|
|
|
|
MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com>");
|
|
MODULE_DESCRIPTION("DB8500 PRCM Unit driver");
|
|
MODULE_LICENSE("GPL v2");
|