linux_dsm_epyc7002/drivers/pci/iov.c
Tony Nguyen ff26449e41 PCI: Restore ARI Capable Hierarchy before setting numVFs
In the restore path, we previously read PCI_SRIOV_VF_OFFSET and
PCI_SRIOV_VF_STRIDE before restoring PCI_SRIOV_CTRL_ARI:

  pci_restore_state
    pci_restore_iov_state
      sriov_restore_state
        pci_iov_set_numvfs
          pci_read_config_word(... PCI_SRIOV_VF_OFFSET, &iov->offset)
          pci_read_config_word(... PCI_SRIOV_VF_STRIDE, &iov->stride)
        pci_write_config_word(... PCI_SRIOV_CTRL, iov->ctrl)

But per SR-IOV r1.1, sec 3.3.3.5, the device can use PCI_SRIOV_CTRL_ARI to
determine PCI_SRIOV_VF_OFFSET and PCI_SRIOV_VF_STRIDE.  Therefore, this
path, which is used for suspend/resume and AER recovery, can corrupt
iov->offset and iov->stride.

Since the iov state is associated with the device, not the driver, if we
reload the driver, it will use the the corrupted data, which may cause
crashes like this:

  kernel BUG at drivers/pci/iov.c:157!
  RIP: 0010:pci_iov_add_virtfn+0x2eb/0x350
  Call Trace:
   pci_enable_sriov+0x353/0x440
   ixgbe_pci_sriov_configure+0xd5/0x1f0 [ixgbe]
   sriov_numvfs_store+0xf7/0x170
   dev_attr_store+0x18/0x30
   sysfs_kf_write+0x37/0x40
   kernfs_fop_write+0x120/0x1b0
   vfs_write+0xb5/0x1a0
   SyS_write+0x55/0xc0

Restore PCI_SRIOV_CTRL_ARI before calling pci_iov_set_numvfs(), then
restore the rest of PCI_SRIOV_CTRL (which may set PCI_SRIOV_CTRL_VFE)
afterwards.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[bhelgaas: changelog, add comment, also clear ARI if necessary]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Emil Tantilov <emil.s.tantilov@intel.com>
2017-10-10 19:15:29 -05:00

798 lines
18 KiB
C

/*
* drivers/pci/iov.c
*
* Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
*
* PCI Express I/O Virtualization (IOV) support.
* Single Root IOV 1.0
* Address Translation Service 1.0
*/
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/export.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/pci-ats.h>
#include "pci.h"
#define VIRTFN_ID_LEN 16
int pci_iov_virtfn_bus(struct pci_dev *dev, int vf_id)
{
if (!dev->is_physfn)
return -EINVAL;
return dev->bus->number + ((dev->devfn + dev->sriov->offset +
dev->sriov->stride * vf_id) >> 8);
}
int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id)
{
if (!dev->is_physfn)
return -EINVAL;
return (dev->devfn + dev->sriov->offset +
dev->sriov->stride * vf_id) & 0xff;
}
/*
* Per SR-IOV spec sec 3.3.10 and 3.3.11, First VF Offset and VF Stride may
* change when NumVFs changes.
*
* Update iov->offset and iov->stride when NumVFs is written.
*/
static inline void pci_iov_set_numvfs(struct pci_dev *dev, int nr_virtfn)
{
struct pci_sriov *iov = dev->sriov;
pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &iov->offset);
pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &iov->stride);
}
/*
* The PF consumes one bus number. NumVFs, First VF Offset, and VF Stride
* determine how many additional bus numbers will be consumed by VFs.
*
* Iterate over all valid NumVFs, validate offset and stride, and calculate
* the maximum number of bus numbers that could ever be required.
*/
static int compute_max_vf_buses(struct pci_dev *dev)
{
struct pci_sriov *iov = dev->sriov;
int nr_virtfn, busnr, rc = 0;
for (nr_virtfn = iov->total_VFs; nr_virtfn; nr_virtfn--) {
pci_iov_set_numvfs(dev, nr_virtfn);
if (!iov->offset || (nr_virtfn > 1 && !iov->stride)) {
rc = -EIO;
goto out;
}
busnr = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
if (busnr > iov->max_VF_buses)
iov->max_VF_buses = busnr;
}
out:
pci_iov_set_numvfs(dev, 0);
return rc;
}
static struct pci_bus *virtfn_add_bus(struct pci_bus *bus, int busnr)
{
struct pci_bus *child;
if (bus->number == busnr)
return bus;
child = pci_find_bus(pci_domain_nr(bus), busnr);
if (child)
return child;
child = pci_add_new_bus(bus, NULL, busnr);
if (!child)
return NULL;
pci_bus_insert_busn_res(child, busnr, busnr);
return child;
}
static void virtfn_remove_bus(struct pci_bus *physbus, struct pci_bus *virtbus)
{
if (physbus != virtbus && list_empty(&virtbus->devices))
pci_remove_bus(virtbus);
}
resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
{
if (!dev->is_physfn)
return 0;
return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
}
int pci_iov_add_virtfn(struct pci_dev *dev, int id)
{
int i;
int rc = -ENOMEM;
u64 size;
char buf[VIRTFN_ID_LEN];
struct pci_dev *virtfn;
struct resource *res;
struct pci_sriov *iov = dev->sriov;
struct pci_bus *bus;
bus = virtfn_add_bus(dev->bus, pci_iov_virtfn_bus(dev, id));
if (!bus)
goto failed;
virtfn = pci_alloc_dev(bus);
if (!virtfn)
goto failed0;
virtfn->devfn = pci_iov_virtfn_devfn(dev, id);
virtfn->vendor = dev->vendor;
virtfn->device = iov->vf_device;
rc = pci_setup_device(virtfn);
if (rc)
goto failed0;
virtfn->dev.parent = dev->dev.parent;
virtfn->physfn = pci_dev_get(dev);
virtfn->is_virtfn = 1;
virtfn->multifunction = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
res = &dev->resource[i + PCI_IOV_RESOURCES];
if (!res->parent)
continue;
virtfn->resource[i].name = pci_name(virtfn);
virtfn->resource[i].flags = res->flags;
size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
virtfn->resource[i].start = res->start + size * id;
virtfn->resource[i].end = virtfn->resource[i].start + size - 1;
rc = request_resource(res, &virtfn->resource[i]);
BUG_ON(rc);
}
pci_device_add(virtfn, virtfn->bus);
sprintf(buf, "virtfn%u", id);
rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
if (rc)
goto failed1;
rc = sysfs_create_link(&virtfn->dev.kobj, &dev->dev.kobj, "physfn");
if (rc)
goto failed2;
kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);
pci_bus_add_device(virtfn);
return 0;
failed2:
sysfs_remove_link(&dev->dev.kobj, buf);
failed1:
pci_dev_put(dev);
pci_stop_and_remove_bus_device(virtfn);
failed0:
virtfn_remove_bus(dev->bus, bus);
failed:
return rc;
}
void pci_iov_remove_virtfn(struct pci_dev *dev, int id)
{
char buf[VIRTFN_ID_LEN];
struct pci_dev *virtfn;
virtfn = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
pci_iov_virtfn_bus(dev, id),
pci_iov_virtfn_devfn(dev, id));
if (!virtfn)
return;
sprintf(buf, "virtfn%u", id);
sysfs_remove_link(&dev->dev.kobj, buf);
/*
* pci_stop_dev() could have been called for this virtfn already,
* so the directory for the virtfn may have been removed before.
* Double check to avoid spurious sysfs warnings.
*/
if (virtfn->dev.kobj.sd)
sysfs_remove_link(&virtfn->dev.kobj, "physfn");
pci_stop_and_remove_bus_device(virtfn);
virtfn_remove_bus(dev->bus, virtfn->bus);
/* balance pci_get_domain_bus_and_slot() */
pci_dev_put(virtfn);
pci_dev_put(dev);
}
int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
{
return 0;
}
int __weak pcibios_sriov_disable(struct pci_dev *pdev)
{
return 0;
}
static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
{
int rc;
int i;
int nres;
u16 initial;
struct resource *res;
struct pci_dev *pdev;
struct pci_sriov *iov = dev->sriov;
int bars = 0;
int bus;
if (!nr_virtfn)
return 0;
if (iov->num_VFs)
return -EINVAL;
pci_read_config_word(dev, iov->pos + PCI_SRIOV_INITIAL_VF, &initial);
if (initial > iov->total_VFs ||
(!(iov->cap & PCI_SRIOV_CAP_VFM) && (initial != iov->total_VFs)))
return -EIO;
if (nr_virtfn < 0 || nr_virtfn > iov->total_VFs ||
(!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial)))
return -EINVAL;
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
bars |= (1 << (i + PCI_IOV_RESOURCES));
res = &dev->resource[i + PCI_IOV_RESOURCES];
if (res->parent)
nres++;
}
if (nres != iov->nres) {
dev_err(&dev->dev, "not enough MMIO resources for SR-IOV\n");
return -ENOMEM;
}
bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
if (bus > dev->bus->busn_res.end) {
dev_err(&dev->dev, "can't enable %d VFs (bus %02x out of range of %pR)\n",
nr_virtfn, bus, &dev->bus->busn_res);
return -ENOMEM;
}
if (pci_enable_resources(dev, bars)) {
dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n");
return -ENOMEM;
}
if (iov->link != dev->devfn) {
pdev = pci_get_slot(dev->bus, iov->link);
if (!pdev)
return -ENODEV;
if (!pdev->is_physfn) {
pci_dev_put(pdev);
return -ENOSYS;
}
rc = sysfs_create_link(&dev->dev.kobj,
&pdev->dev.kobj, "dep_link");
pci_dev_put(pdev);
if (rc)
return rc;
}
iov->initial_VFs = initial;
if (nr_virtfn < initial)
initial = nr_virtfn;
rc = pcibios_sriov_enable(dev, initial);
if (rc) {
dev_err(&dev->dev, "failure %d from pcibios_sriov_enable()\n", rc);
goto err_pcibios;
}
pci_iov_set_numvfs(dev, nr_virtfn);
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
msleep(100);
pci_cfg_access_unlock(dev);
for (i = 0; i < initial; i++) {
rc = pci_iov_add_virtfn(dev, i);
if (rc)
goto failed;
}
kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE);
iov->num_VFs = nr_virtfn;
return 0;
failed:
while (i--)
pci_iov_remove_virtfn(dev, i);
err_pcibios:
iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
ssleep(1);
pci_cfg_access_unlock(dev);
pcibios_sriov_disable(dev);
if (iov->link != dev->devfn)
sysfs_remove_link(&dev->dev.kobj, "dep_link");
pci_iov_set_numvfs(dev, 0);
return rc;
}
static void sriov_disable(struct pci_dev *dev)
{
int i;
struct pci_sriov *iov = dev->sriov;
if (!iov->num_VFs)
return;
for (i = 0; i < iov->num_VFs; i++)
pci_iov_remove_virtfn(dev, i);
iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
ssleep(1);
pci_cfg_access_unlock(dev);
pcibios_sriov_disable(dev);
if (iov->link != dev->devfn)
sysfs_remove_link(&dev->dev.kobj, "dep_link");
iov->num_VFs = 0;
pci_iov_set_numvfs(dev, 0);
}
static int sriov_init(struct pci_dev *dev, int pos)
{
int i, bar64;
int rc;
int nres;
u32 pgsz;
u16 ctrl, total;
struct pci_sriov *iov;
struct resource *res;
struct pci_dev *pdev;
pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl);
if (ctrl & PCI_SRIOV_CTRL_VFE) {
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0);
ssleep(1);
}
ctrl = 0;
list_for_each_entry(pdev, &dev->bus->devices, bus_list)
if (pdev->is_physfn)
goto found;
pdev = NULL;
if (pci_ari_enabled(dev->bus))
ctrl |= PCI_SRIOV_CTRL_ARI;
found:
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl);
pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &total);
if (!total)
return 0;
pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &pgsz);
i = PAGE_SHIFT > 12 ? PAGE_SHIFT - 12 : 0;
pgsz &= ~((1 << i) - 1);
if (!pgsz)
return -EIO;
pgsz &= ~(pgsz - 1);
pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
iov = kzalloc(sizeof(*iov), GFP_KERNEL);
if (!iov)
return -ENOMEM;
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
res = &dev->resource[i + PCI_IOV_RESOURCES];
/*
* If it is already FIXED, don't change it, something
* (perhaps EA or header fixups) wants it this way.
*/
if (res->flags & IORESOURCE_PCI_FIXED)
bar64 = (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
else
bar64 = __pci_read_base(dev, pci_bar_unknown, res,
pos + PCI_SRIOV_BAR + i * 4);
if (!res->flags)
continue;
if (resource_size(res) & (PAGE_SIZE - 1)) {
rc = -EIO;
goto failed;
}
iov->barsz[i] = resource_size(res);
res->end = res->start + resource_size(res) * total - 1;
dev_info(&dev->dev, "VF(n) BAR%d space: %pR (contains BAR%d for %d VFs)\n",
i, res, i, total);
i += bar64;
nres++;
}
iov->pos = pos;
iov->nres = nres;
iov->ctrl = ctrl;
iov->total_VFs = total;
pci_read_config_word(dev, pos + PCI_SRIOV_VF_DID, &iov->vf_device);
iov->pgsz = pgsz;
iov->self = dev;
iov->drivers_autoprobe = true;
pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link);
if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)
iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link);
if (pdev)
iov->dev = pci_dev_get(pdev);
else
iov->dev = dev;
dev->sriov = iov;
dev->is_physfn = 1;
rc = compute_max_vf_buses(dev);
if (rc)
goto fail_max_buses;
return 0;
fail_max_buses:
dev->sriov = NULL;
dev->is_physfn = 0;
failed:
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
res = &dev->resource[i + PCI_IOV_RESOURCES];
res->flags = 0;
}
kfree(iov);
return rc;
}
static void sriov_release(struct pci_dev *dev)
{
BUG_ON(dev->sriov->num_VFs);
if (dev != dev->sriov->dev)
pci_dev_put(dev->sriov->dev);
kfree(dev->sriov);
dev->sriov = NULL;
}
static void sriov_restore_state(struct pci_dev *dev)
{
int i;
u16 ctrl;
struct pci_sriov *iov = dev->sriov;
pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &ctrl);
if (ctrl & PCI_SRIOV_CTRL_VFE)
return;
/*
* Restore PCI_SRIOV_CTRL_ARI before pci_iov_set_numvfs() because
* it reads offset & stride, which depend on PCI_SRIOV_CTRL_ARI.
*/
ctrl &= ~PCI_SRIOV_CTRL_ARI;
ctrl |= iov->ctrl & PCI_SRIOV_CTRL_ARI;
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, ctrl);
for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++)
pci_update_resource(dev, i);
pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
pci_iov_set_numvfs(dev, iov->num_VFs);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
if (iov->ctrl & PCI_SRIOV_CTRL_VFE)
msleep(100);
}
/**
* pci_iov_init - initialize the IOV capability
* @dev: the PCI device
*
* Returns 0 on success, or negative on failure.
*/
int pci_iov_init(struct pci_dev *dev)
{
int pos;
if (!pci_is_pcie(dev))
return -ENODEV;
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
if (pos)
return sriov_init(dev, pos);
return -ENODEV;
}
/**
* pci_iov_release - release resources used by the IOV capability
* @dev: the PCI device
*/
void pci_iov_release(struct pci_dev *dev)
{
if (dev->is_physfn)
sriov_release(dev);
}
/**
* pci_iov_update_resource - update a VF BAR
* @dev: the PCI device
* @resno: the resource number
*
* Update a VF BAR in the SR-IOV capability of a PF.
*/
void pci_iov_update_resource(struct pci_dev *dev, int resno)
{
struct pci_sriov *iov = dev->is_physfn ? dev->sriov : NULL;
struct resource *res = dev->resource + resno;
int vf_bar = resno - PCI_IOV_RESOURCES;
struct pci_bus_region region;
u16 cmd;
u32 new;
int reg;
/*
* The generic pci_restore_bars() path calls this for all devices,
* including VFs and non-SR-IOV devices. If this is not a PF, we
* have nothing to do.
*/
if (!iov)
return;
pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &cmd);
if ((cmd & PCI_SRIOV_CTRL_VFE) && (cmd & PCI_SRIOV_CTRL_MSE)) {
dev_WARN(&dev->dev, "can't update enabled VF BAR%d %pR\n",
vf_bar, res);
return;
}
/*
* Ignore unimplemented BARs, unused resource slots for 64-bit
* BARs, and non-movable resources, e.g., those described via
* Enhanced Allocation.
*/
if (!res->flags)
return;
if (res->flags & IORESOURCE_UNSET)
return;
if (res->flags & IORESOURCE_PCI_FIXED)
return;
pcibios_resource_to_bus(dev->bus, &region, res);
new = region.start;
new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK;
reg = iov->pos + PCI_SRIOV_BAR + 4 * vf_bar;
pci_write_config_dword(dev, reg, new);
if (res->flags & IORESOURCE_MEM_64) {
new = region.start >> 16 >> 16;
pci_write_config_dword(dev, reg + 4, new);
}
}
resource_size_t __weak pcibios_iov_resource_alignment(struct pci_dev *dev,
int resno)
{
return pci_iov_resource_size(dev, resno);
}
/**
* pci_sriov_resource_alignment - get resource alignment for VF BAR
* @dev: the PCI device
* @resno: the resource number
*
* Returns the alignment of the VF BAR found in the SR-IOV capability.
* This is not the same as the resource size which is defined as
* the VF BAR size multiplied by the number of VFs. The alignment
* is just the VF BAR size.
*/
resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
{
return pcibios_iov_resource_alignment(dev, resno);
}
/**
* pci_restore_iov_state - restore the state of the IOV capability
* @dev: the PCI device
*/
void pci_restore_iov_state(struct pci_dev *dev)
{
if (dev->is_physfn)
sriov_restore_state(dev);
}
/**
* pci_iov_bus_range - find bus range used by Virtual Function
* @bus: the PCI bus
*
* Returns max number of buses (exclude current one) used by Virtual
* Functions.
*/
int pci_iov_bus_range(struct pci_bus *bus)
{
int max = 0;
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
if (!dev->is_physfn)
continue;
if (dev->sriov->max_VF_buses > max)
max = dev->sriov->max_VF_buses;
}
return max ? max - bus->number : 0;
}
/**
* pci_enable_sriov - enable the SR-IOV capability
* @dev: the PCI device
* @nr_virtfn: number of virtual functions to enable
*
* Returns 0 on success, or negative on failure.
*/
int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
{
might_sleep();
if (!dev->is_physfn)
return -ENOSYS;
return sriov_enable(dev, nr_virtfn);
}
EXPORT_SYMBOL_GPL(pci_enable_sriov);
/**
* pci_disable_sriov - disable the SR-IOV capability
* @dev: the PCI device
*/
void pci_disable_sriov(struct pci_dev *dev)
{
might_sleep();
if (!dev->is_physfn)
return;
sriov_disable(dev);
}
EXPORT_SYMBOL_GPL(pci_disable_sriov);
/**
* pci_num_vf - return number of VFs associated with a PF device_release_driver
* @dev: the PCI device
*
* Returns number of VFs, or 0 if SR-IOV is not enabled.
*/
int pci_num_vf(struct pci_dev *dev)
{
if (!dev->is_physfn)
return 0;
return dev->sriov->num_VFs;
}
EXPORT_SYMBOL_GPL(pci_num_vf);
/**
* pci_vfs_assigned - returns number of VFs are assigned to a guest
* @dev: the PCI device
*
* Returns number of VFs belonging to this device that are assigned to a guest.
* If device is not a physical function returns 0.
*/
int pci_vfs_assigned(struct pci_dev *dev)
{
struct pci_dev *vfdev;
unsigned int vfs_assigned = 0;
unsigned short dev_id;
/* only search if we are a PF */
if (!dev->is_physfn)
return 0;
/*
* determine the device ID for the VFs, the vendor ID will be the
* same as the PF so there is no need to check for that one
*/
dev_id = dev->sriov->vf_device;
/* loop through all the VFs to see if we own any that are assigned */
vfdev = pci_get_device(dev->vendor, dev_id, NULL);
while (vfdev) {
/*
* It is considered assigned if it is a virtual function with
* our dev as the physical function and the assigned bit is set
*/
if (vfdev->is_virtfn && (vfdev->physfn == dev) &&
pci_is_dev_assigned(vfdev))
vfs_assigned++;
vfdev = pci_get_device(dev->vendor, dev_id, vfdev);
}
return vfs_assigned;
}
EXPORT_SYMBOL_GPL(pci_vfs_assigned);
/**
* pci_sriov_set_totalvfs -- reduce the TotalVFs available
* @dev: the PCI PF device
* @numvfs: number that should be used for TotalVFs supported
*
* Should be called from PF driver's probe routine with
* device's mutex held.
*
* Returns 0 if PF is an SRIOV-capable device and
* value of numvfs valid. If not a PF return -ENOSYS;
* if numvfs is invalid return -EINVAL;
* if VFs already enabled, return -EBUSY.
*/
int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
{
if (!dev->is_physfn)
return -ENOSYS;
if (numvfs > dev->sriov->total_VFs)
return -EINVAL;
/* Shouldn't change if VFs already enabled */
if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE)
return -EBUSY;
else
dev->sriov->driver_max_VFs = numvfs;
return 0;
}
EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs);
/**
* pci_sriov_get_totalvfs -- get total VFs supported on this device
* @dev: the PCI PF device
*
* For a PCIe device with SRIOV support, return the PCIe
* SRIOV capability value of TotalVFs or the value of driver_max_VFs
* if the driver reduced it. Otherwise 0.
*/
int pci_sriov_get_totalvfs(struct pci_dev *dev)
{
if (!dev->is_physfn)
return 0;
if (dev->sriov->driver_max_VFs)
return dev->sriov->driver_max_VFs;
return dev->sriov->total_VFs;
}
EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs);