mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 04:57:24 +07:00
b01052ab09
Only looking at the lock register causes the status to float between locked and not locked when there is no signal. So improve the logic to also examine the state of the FSC PLL, which results in the lock status being consistently reported. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
796 lines
25 KiB
C
796 lines
25 KiB
C
/*
|
|
* Auvitek AU8522 QAM/8VSB demodulator driver and video decoder
|
|
*
|
|
* Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org>
|
|
* Copyright (C) 2005-2008 Auvitek International, Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* As published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/* Developer notes:
|
|
*
|
|
* Enough is implemented here for CVBS and S-Video inputs, but the actual
|
|
* analog demodulator code isn't implemented (not needed for xc5000 since it
|
|
* has its own demodulator and outputs CVBS)
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-device.h>
|
|
#include "au8522.h"
|
|
#include "au8522_priv.h"
|
|
|
|
MODULE_AUTHOR("Devin Heitmueller");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int au8522_analog_debug;
|
|
|
|
|
|
module_param_named(analog_debug, au8522_analog_debug, int, 0644);
|
|
|
|
MODULE_PARM_DESC(analog_debug,
|
|
"Analog debugging messages [0=Off (default) 1=On]");
|
|
|
|
struct au8522_register_config {
|
|
u16 reg_name;
|
|
u8 reg_val[8];
|
|
};
|
|
|
|
|
|
/* Video Decoder Filter Coefficients
|
|
The values are as follows from left to right
|
|
0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13"
|
|
*/
|
|
static const struct au8522_register_config filter_coef[] = {
|
|
{AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} },
|
|
{AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} },
|
|
{AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} },
|
|
{AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} },
|
|
{AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} },
|
|
{AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} },
|
|
{AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} },
|
|
{AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} },
|
|
{AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} },
|
|
{AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} },
|
|
{AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} },
|
|
{AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} },
|
|
{AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} },
|
|
{AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} },
|
|
{AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} },
|
|
{AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} },
|
|
{AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} },
|
|
{AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} },
|
|
{AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} },
|
|
{AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} },
|
|
{AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} },
|
|
|
|
};
|
|
#define NUM_FILTER_COEF (sizeof(filter_coef)\
|
|
/ sizeof(struct au8522_register_config))
|
|
|
|
|
|
/* Registers 0x060b through 0x0652 are the LP Filter coefficients
|
|
The values are as follows from left to right
|
|
0="SIF" 1="ATVRF/ATVRF13"
|
|
Note: the "ATVRF/ATVRF13" mode has never been tested
|
|
*/
|
|
static const struct au8522_register_config lpfilter_coef[] = {
|
|
{0x060b, {0x21, 0x0b} },
|
|
{0x060c, {0xad, 0xad} },
|
|
{0x060d, {0x70, 0xf0} },
|
|
{0x060e, {0xea, 0xe9} },
|
|
{0x060f, {0xdd, 0xdd} },
|
|
{0x0610, {0x08, 0x64} },
|
|
{0x0611, {0x60, 0x60} },
|
|
{0x0612, {0xf8, 0xb2} },
|
|
{0x0613, {0x01, 0x02} },
|
|
{0x0614, {0xe4, 0xb4} },
|
|
{0x0615, {0x19, 0x02} },
|
|
{0x0616, {0xae, 0x2e} },
|
|
{0x0617, {0xee, 0xc5} },
|
|
{0x0618, {0x56, 0x56} },
|
|
{0x0619, {0x30, 0x58} },
|
|
{0x061a, {0xf9, 0xf8} },
|
|
{0x061b, {0x24, 0x64} },
|
|
{0x061c, {0x07, 0x07} },
|
|
{0x061d, {0x30, 0x30} },
|
|
{0x061e, {0xa9, 0xed} },
|
|
{0x061f, {0x09, 0x0b} },
|
|
{0x0620, {0x42, 0xc2} },
|
|
{0x0621, {0x1d, 0x2a} },
|
|
{0x0622, {0xd6, 0x56} },
|
|
{0x0623, {0x95, 0x8b} },
|
|
{0x0624, {0x2b, 0x2b} },
|
|
{0x0625, {0x30, 0x24} },
|
|
{0x0626, {0x3e, 0x3e} },
|
|
{0x0627, {0x62, 0xe2} },
|
|
{0x0628, {0xe9, 0xf5} },
|
|
{0x0629, {0x99, 0x19} },
|
|
{0x062a, {0xd4, 0x11} },
|
|
{0x062b, {0x03, 0x04} },
|
|
{0x062c, {0xb5, 0x85} },
|
|
{0x062d, {0x1e, 0x20} },
|
|
{0x062e, {0x2a, 0xea} },
|
|
{0x062f, {0xd7, 0xd2} },
|
|
{0x0630, {0x15, 0x15} },
|
|
{0x0631, {0xa3, 0xa9} },
|
|
{0x0632, {0x1f, 0x1f} },
|
|
{0x0633, {0xf9, 0xd1} },
|
|
{0x0634, {0xc0, 0xc3} },
|
|
{0x0635, {0x4d, 0x8d} },
|
|
{0x0636, {0x21, 0x31} },
|
|
{0x0637, {0x83, 0x83} },
|
|
{0x0638, {0x08, 0x8c} },
|
|
{0x0639, {0x19, 0x19} },
|
|
{0x063a, {0x45, 0xa5} },
|
|
{0x063b, {0xef, 0xec} },
|
|
{0x063c, {0x8a, 0x8a} },
|
|
{0x063d, {0xf4, 0xf6} },
|
|
{0x063e, {0x8f, 0x8f} },
|
|
{0x063f, {0x44, 0x0c} },
|
|
{0x0640, {0xef, 0xf0} },
|
|
{0x0641, {0x66, 0x66} },
|
|
{0x0642, {0xcc, 0xd2} },
|
|
{0x0643, {0x41, 0x41} },
|
|
{0x0644, {0x63, 0x93} },
|
|
{0x0645, {0x8e, 0x8e} },
|
|
{0x0646, {0xa2, 0x42} },
|
|
{0x0647, {0x7b, 0x7b} },
|
|
{0x0648, {0x04, 0x04} },
|
|
{0x0649, {0x00, 0x00} },
|
|
{0x064a, {0x40, 0x40} },
|
|
{0x064b, {0x8c, 0x98} },
|
|
{0x064c, {0x00, 0x00} },
|
|
{0x064d, {0x63, 0xc3} },
|
|
{0x064e, {0x04, 0x04} },
|
|
{0x064f, {0x20, 0x20} },
|
|
{0x0650, {0x00, 0x00} },
|
|
{0x0651, {0x40, 0x40} },
|
|
{0x0652, {0x01, 0x01} },
|
|
};
|
|
#define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\
|
|
/ sizeof(struct au8522_register_config))
|
|
|
|
static inline struct au8522_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct au8522_state, sd);
|
|
}
|
|
|
|
static void setup_decoder_defaults(struct au8522_state *state, bool is_svideo)
|
|
{
|
|
int i;
|
|
int filter_coef_type;
|
|
|
|
/* Provide reasonable defaults for picture tuning values */
|
|
au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07);
|
|
au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed);
|
|
au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79);
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80);
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80);
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00);
|
|
|
|
/* Other decoder registers */
|
|
au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00);
|
|
|
|
if (is_svideo)
|
|
au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x04);
|
|
else
|
|
au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x00);
|
|
|
|
au8522_writereg(state, AU8522_TVDEC_PGA_REG012H,
|
|
AU8522_TVDEC_PGA_REG012H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_MODE_REG015H,
|
|
AU8522_TVDEC_COMB_MODE_REG015H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H,
|
|
AU8522_TVDED_DBG_MODE_REG060H_CVBS);
|
|
|
|
if (state->std == V4L2_STD_PAL_M) {
|
|
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H,
|
|
AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 |
|
|
AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 |
|
|
AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_AUTO);
|
|
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H,
|
|
AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_PAL_M);
|
|
} else {
|
|
/* NTSC */
|
|
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H,
|
|
AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 |
|
|
AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 |
|
|
AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN);
|
|
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H,
|
|
AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC);
|
|
}
|
|
au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H,
|
|
AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H,
|
|
AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR1_REG065H,
|
|
AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR2_REG066H,
|
|
AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR3_REG067H,
|
|
AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_NOTCH_THR_REG068H,
|
|
AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR1_REG069H,
|
|
AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH,
|
|
AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH,
|
|
AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS);
|
|
if (is_svideo) {
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO);
|
|
} else {
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
|
|
}
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH,
|
|
AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H,
|
|
AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS);
|
|
au8522_writereg(state, AU8522_REG071H, AU8522_REG071H_CVBS);
|
|
au8522_writereg(state, AU8522_REG072H, AU8522_REG072H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H,
|
|
AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS);
|
|
au8522_writereg(state, AU8522_REG074H, AU8522_REG074H_CVBS);
|
|
au8522_writereg(state, AU8522_REG075H, AU8522_REG075H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_DCAGC_CTRL_REG077H,
|
|
AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_PIC_START_ADJ_REG078H,
|
|
AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H,
|
|
AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH,
|
|
AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_INTRP_CTRL_REG07BH,
|
|
AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H,
|
|
AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS);
|
|
au8522_writereg(state, AU8522_TOREGAAGC_REG0E5H,
|
|
AU8522_TOREGAAGC_REG0E5H_CVBS);
|
|
au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS);
|
|
|
|
if (is_svideo) {
|
|
/* Despite what the table says, for the HVR-950q we still need
|
|
to be in CVBS mode for the S-Video input (reason unknown). */
|
|
/* filter_coef_type = 3; */
|
|
filter_coef_type = 5;
|
|
} else {
|
|
filter_coef_type = 5;
|
|
}
|
|
|
|
/* Load the Video Decoder Filter Coefficients */
|
|
for (i = 0; i < NUM_FILTER_COEF; i++) {
|
|
au8522_writereg(state, filter_coef[i].reg_name,
|
|
filter_coef[i].reg_val[filter_coef_type]);
|
|
}
|
|
|
|
/* It's not clear what these registers are for, but they are always
|
|
set to the same value regardless of what mode we're in */
|
|
au8522_writereg(state, AU8522_REG42EH, 0x87);
|
|
au8522_writereg(state, AU8522_REG42FH, 0xa2);
|
|
au8522_writereg(state, AU8522_REG430H, 0xbf);
|
|
au8522_writereg(state, AU8522_REG431H, 0xcb);
|
|
au8522_writereg(state, AU8522_REG432H, 0xa1);
|
|
au8522_writereg(state, AU8522_REG433H, 0x41);
|
|
au8522_writereg(state, AU8522_REG434H, 0x88);
|
|
au8522_writereg(state, AU8522_REG435H, 0xc2);
|
|
au8522_writereg(state, AU8522_REG436H, 0x3c);
|
|
}
|
|
|
|
static void au8522_setup_cvbs_mode(struct au8522_state *state, u8 input_mode)
|
|
{
|
|
/* here we're going to try the pre-programmed route */
|
|
au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
|
|
AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
|
|
|
|
/* PGA in automatic mode */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
|
|
|
|
/* Enable clamping control */
|
|
au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
|
|
|
|
au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, input_mode);
|
|
|
|
setup_decoder_defaults(state, false);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
|
|
}
|
|
|
|
static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state,
|
|
u8 input_mode)
|
|
{
|
|
/* here we're going to try the pre-programmed route */
|
|
au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
|
|
AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
|
|
|
|
/* It's not clear why we have to have the PGA in automatic mode while
|
|
enabling clamp control, but it's what Windows does */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
|
|
|
|
/* Enable clamping control */
|
|
au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
|
|
|
|
/* Disable automatic PGA (since the CVBS is coming from the tuner) */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
|
|
|
|
/* Set input mode to CVBS on channel 4 with SIF audio input enabled */
|
|
au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, input_mode);
|
|
|
|
setup_decoder_defaults(state, false);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
|
|
}
|
|
|
|
static void au8522_setup_svideo_mode(struct au8522_state *state,
|
|
u8 input_mode)
|
|
{
|
|
au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
|
|
AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO);
|
|
|
|
/* Set input to Y on Channe1, C on Channel 3 */
|
|
au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, input_mode);
|
|
|
|
/* PGA in automatic mode */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
|
|
|
|
/* Enable clamping control */
|
|
au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
|
|
|
|
setup_decoder_defaults(state, true);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static void disable_audio_input(struct au8522_state *state)
|
|
{
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04);
|
|
au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO);
|
|
}
|
|
|
|
/* 0=disable, 1=SIF */
|
|
static void set_audio_input(struct au8522_state *state)
|
|
{
|
|
int aud_input = state->aud_input;
|
|
int i;
|
|
|
|
/* Note that this function needs to be used in conjunction with setting
|
|
the input routing via register 0x81 */
|
|
|
|
if (aud_input == AU8522_AUDIO_NONE) {
|
|
disable_audio_input(state);
|
|
return;
|
|
}
|
|
|
|
if (aud_input != AU8522_AUDIO_SIF) {
|
|
/* The caller asked for a mode we don't currently support */
|
|
printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n",
|
|
aud_input);
|
|
return;
|
|
}
|
|
|
|
/* Load the Audio Decoder Filter Coefficients */
|
|
for (i = 0; i < NUM_LPFILTER_COEF; i++) {
|
|
au8522_writereg(state, lpfilter_coef[i].reg_name,
|
|
lpfilter_coef[i].reg_val[0]);
|
|
}
|
|
|
|
/* Set the volume */
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff);
|
|
|
|
/* Not sure what this does */
|
|
au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO);
|
|
|
|
/* Setup the audio mode to stereo DBX */
|
|
au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82);
|
|
msleep(70);
|
|
|
|
/* Start the audio processing module */
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d);
|
|
|
|
/* Set the audio frequency to 48 KHz */
|
|
au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03);
|
|
|
|
/* Set the I2S parameters (WS, LSB, mode, sample rate */
|
|
au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2);
|
|
|
|
/* Enable the I2S output */
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int au8522_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct au8522_state *state =
|
|
container_of(ctrl->handler, struct au8522_state, hdl);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH,
|
|
ctrl->val - 128);
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH,
|
|
ctrl->val);
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH,
|
|
ctrl->val);
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH,
|
|
ctrl->val);
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH,
|
|
ctrl->val >> 8);
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH,
|
|
ctrl->val & 0xFF);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int au8522_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
reg->val = au8522_readreg(state, reg->reg & 0xffff);
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
au8522_writereg(state, reg->reg, reg->val & 0xff);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void au8522_video_set(struct au8522_state *state)
|
|
{
|
|
u8 input_mode;
|
|
|
|
au8522_writereg(state, 0xa4, 1 << 5);
|
|
|
|
switch (state->vid_input) {
|
|
case AU8522_COMPOSITE_CH1:
|
|
input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH1;
|
|
au8522_setup_cvbs_mode(state, input_mode);
|
|
break;
|
|
case AU8522_COMPOSITE_CH2:
|
|
input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH2;
|
|
au8522_setup_cvbs_mode(state, input_mode);
|
|
break;
|
|
case AU8522_COMPOSITE_CH3:
|
|
input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH3;
|
|
au8522_setup_cvbs_mode(state, input_mode);
|
|
break;
|
|
case AU8522_COMPOSITE_CH4:
|
|
input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH4;
|
|
au8522_setup_cvbs_mode(state, input_mode);
|
|
break;
|
|
case AU8522_SVIDEO_CH13:
|
|
input_mode = AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13;
|
|
au8522_setup_svideo_mode(state, input_mode);
|
|
break;
|
|
case AU8522_SVIDEO_CH24:
|
|
input_mode = AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24;
|
|
au8522_setup_svideo_mode(state, input_mode);
|
|
break;
|
|
default:
|
|
case AU8522_COMPOSITE_CH4_SIF:
|
|
input_mode = AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF;
|
|
au8522_setup_cvbs_tuner_mode(state, input_mode);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int au8522_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
if (enable) {
|
|
/*
|
|
* Clear out any state associated with the digital side of the
|
|
* chip, so that when it gets powered back up it won't think
|
|
* that it is already tuned
|
|
*/
|
|
state->current_frequency = 0;
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
0x01);
|
|
msleep(10);
|
|
|
|
au8522_video_set(state);
|
|
set_audio_input(state);
|
|
|
|
state->operational_mode = AU8522_ANALOG_MODE;
|
|
} else {
|
|
/* This does not completely power down the device
|
|
(it only reduces it from around 140ma to 80ma) */
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
1 << 5);
|
|
state->operational_mode = AU8522_SUSPEND_MODE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_s_video_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
switch(input) {
|
|
case AU8522_COMPOSITE_CH1:
|
|
case AU8522_SVIDEO_CH13:
|
|
case AU8522_COMPOSITE_CH4_SIF:
|
|
state->vid_input = input;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "au8522 mode not currently supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state->operational_mode == AU8522_ANALOG_MODE)
|
|
au8522_video_set(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
if ((std & (V4L2_STD_PAL_M | V4L2_STD_NTSC_M)) == 0)
|
|
return -EINVAL;
|
|
|
|
state->std = std;
|
|
|
|
if (state->operational_mode == AU8522_ANALOG_MODE)
|
|
au8522_video_set(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_s_audio_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
state->aud_input = input;
|
|
|
|
if (state->operational_mode == AU8522_ANALOG_MODE)
|
|
set_audio_input(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
|
|
{
|
|
int val = 0;
|
|
struct au8522_state *state = to_state(sd);
|
|
u8 lock_status;
|
|
u8 pll_status;
|
|
|
|
/* Interrogate the decoder to see if we are getting a real signal */
|
|
lock_status = au8522_readreg(state, 0x00);
|
|
pll_status = au8522_readreg(state, 0x7e);
|
|
if ((lock_status == 0xa2) && (pll_status & 0x10))
|
|
vt->signal = 0xffff;
|
|
else
|
|
vt->signal = 0x00;
|
|
|
|
vt->capability |=
|
|
V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
|
|
V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
|
|
|
|
val = V4L2_TUNER_SUB_MONO;
|
|
vt->rxsubchans = val;
|
|
vt->audmode = V4L2_TUNER_MODE_STEREO;
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_subdev_core_ops au8522_core_ops = {
|
|
.log_status = v4l2_ctrl_subdev_log_status,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = au8522_g_register,
|
|
.s_register = au8522_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_tuner_ops au8522_tuner_ops = {
|
|
.g_tuner = au8522_g_tuner,
|
|
};
|
|
|
|
static const struct v4l2_subdev_audio_ops au8522_audio_ops = {
|
|
.s_routing = au8522_s_audio_routing,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops au8522_video_ops = {
|
|
.s_routing = au8522_s_video_routing,
|
|
.s_stream = au8522_s_stream,
|
|
.s_std = au8522_s_std,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops au8522_ops = {
|
|
.core = &au8522_core_ops,
|
|
.tuner = &au8522_tuner_ops,
|
|
.audio = &au8522_audio_ops,
|
|
.video = &au8522_video_ops,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_ops au8522_ctrl_ops = {
|
|
.s_ctrl = au8522_s_ctrl,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int au8522_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *did)
|
|
{
|
|
struct au8522_state *state;
|
|
struct v4l2_ctrl_handler *hdl;
|
|
struct v4l2_subdev *sd;
|
|
int instance;
|
|
#ifdef CONFIG_MEDIA_CONTROLLER
|
|
int ret;
|
|
#endif
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
return -EIO;
|
|
}
|
|
|
|
/* allocate memory for the internal state */
|
|
instance = au8522_get_state(&state, client->adapter, client->addr);
|
|
switch (instance) {
|
|
case 0:
|
|
printk(KERN_ERR "au8522_decoder allocation failed\n");
|
|
return -EIO;
|
|
case 1:
|
|
/* new demod instance */
|
|
printk(KERN_INFO "au8522_decoder creating new instance...\n");
|
|
break;
|
|
default:
|
|
/* existing demod instance */
|
|
printk(KERN_INFO "au8522_decoder attach existing instance.\n");
|
|
break;
|
|
}
|
|
|
|
state->config.demod_address = 0x8e >> 1;
|
|
state->i2c = client->adapter;
|
|
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &au8522_ops);
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
|
|
state->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
|
|
state->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
|
|
state->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
|
|
state->pads[DEMOD_PAD_AUDIO_OUT].flags = MEDIA_PAD_FL_SOURCE;
|
|
sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
|
|
|
|
ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(state->pads),
|
|
state->pads);
|
|
if (ret < 0) {
|
|
v4l_info(client, "failed to initialize media entity!\n");
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
hdl = &state->hdl;
|
|
v4l2_ctrl_handler_init(hdl, 4);
|
|
v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, 0, 255, 1, 109);
|
|
v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
|
|
V4L2_CID_CONTRAST, 0, 255, 1,
|
|
AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
|
|
v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
|
|
V4L2_CID_SATURATION, 0, 255, 1, 128);
|
|
v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
|
|
V4L2_CID_HUE, -32768, 32767, 1, 0);
|
|
sd->ctrl_handler = hdl;
|
|
if (hdl->error) {
|
|
int err = hdl->error;
|
|
|
|
v4l2_ctrl_handler_free(hdl);
|
|
au8522_release_state(state);
|
|
return err;
|
|
}
|
|
|
|
state->c = client;
|
|
state->std = V4L2_STD_NTSC_M;
|
|
state->vid_input = AU8522_COMPOSITE_CH1;
|
|
state->aud_input = AU8522_AUDIO_NONE;
|
|
state->id = 8522;
|
|
state->rev = 0;
|
|
|
|
/* Jam open the i2c gate to the tuner */
|
|
au8522_writereg(state, 0x106, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
v4l2_device_unregister_subdev(sd);
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
au8522_release_state(to_state(sd));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id au8522_id[] = {
|
|
{"au8522", 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, au8522_id);
|
|
|
|
static struct i2c_driver au8522_driver = {
|
|
.driver = {
|
|
.name = "au8522",
|
|
},
|
|
.probe = au8522_probe,
|
|
.remove = au8522_remove,
|
|
.id_table = au8522_id,
|
|
};
|
|
|
|
module_i2c_driver(au8522_driver);
|