mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 10:25:06 +07:00
1592a8e456
It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
145 lines
3.0 KiB
ArmAsm
145 lines
3.0 KiB
ArmAsm
/*
|
|
* arch/s390/kernel/base.S
|
|
*
|
|
* Copyright IBM Corp. 2006, 2007
|
|
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
* Michael Holzheu <holzheu@de.ibm.com>
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/sigp.h>
|
|
|
|
ENTRY(s390_base_mcck_handler)
|
|
basr %r13,0
|
|
0: lg %r15,__LC_PANIC_STACK # load panic stack
|
|
aghi %r15,-STACK_FRAME_OVERHEAD
|
|
larl %r1,s390_base_mcck_handler_fn
|
|
lg %r1,0(%r1)
|
|
ltgr %r1,%r1
|
|
jz 1f
|
|
basr %r14,%r1
|
|
1: la %r1,4095
|
|
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
|
|
lpswe __LC_MCK_OLD_PSW
|
|
|
|
.section .bss
|
|
.align 8
|
|
.globl s390_base_mcck_handler_fn
|
|
s390_base_mcck_handler_fn:
|
|
.quad 0
|
|
.previous
|
|
|
|
ENTRY(s390_base_ext_handler)
|
|
stmg %r0,%r15,__LC_SAVE_AREA_ASYNC
|
|
basr %r13,0
|
|
0: aghi %r15,-STACK_FRAME_OVERHEAD
|
|
larl %r1,s390_base_ext_handler_fn
|
|
lg %r1,0(%r1)
|
|
ltgr %r1,%r1
|
|
jz 1f
|
|
basr %r14,%r1
|
|
1: lmg %r0,%r15,__LC_SAVE_AREA_ASYNC
|
|
ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit
|
|
lpswe __LC_EXT_OLD_PSW
|
|
|
|
.section .bss
|
|
.align 8
|
|
.globl s390_base_ext_handler_fn
|
|
s390_base_ext_handler_fn:
|
|
.quad 0
|
|
.previous
|
|
|
|
ENTRY(s390_base_pgm_handler)
|
|
stmg %r0,%r15,__LC_SAVE_AREA_SYNC
|
|
basr %r13,0
|
|
0: aghi %r15,-STACK_FRAME_OVERHEAD
|
|
larl %r1,s390_base_pgm_handler_fn
|
|
lg %r1,0(%r1)
|
|
ltgr %r1,%r1
|
|
jz 1f
|
|
basr %r14,%r1
|
|
lmg %r0,%r15,__LC_SAVE_AREA_SYNC
|
|
lpswe __LC_PGM_OLD_PSW
|
|
1: lpswe disabled_wait_psw-0b(%r13)
|
|
|
|
.align 8
|
|
disabled_wait_psw:
|
|
.quad 0x0002000180000000,0x0000000000000000 + s390_base_pgm_handler
|
|
|
|
.section .bss
|
|
.align 8
|
|
.globl s390_base_pgm_handler_fn
|
|
s390_base_pgm_handler_fn:
|
|
.quad 0
|
|
.previous
|
|
|
|
#
|
|
# Calls diag 308 subcode 1 and continues execution
|
|
#
|
|
ENTRY(diag308_reset)
|
|
larl %r4,.Lctlregs # Save control registers
|
|
stctg %c0,%c15,0(%r4)
|
|
lg %r2,0(%r4) # Disable lowcore protection
|
|
nilh %r2,0xefff
|
|
larl %r4,.Lctlreg0
|
|
stg %r2,0(%r4)
|
|
lctlg %c0,%c0,0(%r4)
|
|
larl %r4,.Lfpctl # Floating point control register
|
|
stfpc 0(%r4)
|
|
larl %r4,.Lprefix # Save prefix register
|
|
stpx 0(%r4)
|
|
larl %r4,.Lprefix_zero # Set prefix register to 0
|
|
spx 0(%r4)
|
|
larl %r4,.Lcontinue_psw # Save PSW flags
|
|
epsw %r2,%r3
|
|
stm %r2,%r3,0(%r4)
|
|
larl %r4,.Lrestart_psw # Setup restart PSW at absolute 0
|
|
lghi %r3,0
|
|
lg %r4,0(%r4) # Save PSW
|
|
sturg %r4,%r3 # Use sturg, because of large pages
|
|
lghi %r1,1
|
|
lghi %r0,0
|
|
diag %r0,%r1,0x308
|
|
.Lrestart_part2:
|
|
lhi %r0,0 # Load r0 with zero
|
|
lhi %r1,2 # Use mode 2 = ESAME (dump)
|
|
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode
|
|
sam64 # Switch to 64 bit addressing mode
|
|
larl %r4,.Lctlregs # Restore control registers
|
|
lctlg %c0,%c15,0(%r4)
|
|
larl %r4,.Lfpctl # Restore floating point ctl register
|
|
lfpc 0(%r4)
|
|
larl %r4,.Lprefix # Restore prefix register
|
|
spx 0(%r4)
|
|
larl %r4,.Lcontinue_psw # Restore PSW flags
|
|
lpswe 0(%r4)
|
|
.Lcontinue:
|
|
br %r14
|
|
.align 16
|
|
.Lrestart_psw:
|
|
.long 0x00080000,0x80000000 + .Lrestart_part2
|
|
|
|
.section .data..nosave,"aw",@progbits
|
|
.align 8
|
|
.Lcontinue_psw:
|
|
.quad 0,.Lcontinue
|
|
.previous
|
|
|
|
.section .bss
|
|
.align 8
|
|
.Lctlreg0:
|
|
.quad 0
|
|
.Lctlregs:
|
|
.rept 16
|
|
.quad 0
|
|
.endr
|
|
.Lfpctl:
|
|
.long 0
|
|
.Lprefix:
|
|
.long 0
|
|
.Lprefix_zero:
|
|
.long 0
|
|
.previous
|