..
akita-ioexp.c
i2c: normal_i2c can be made const (remaining drivers)
2008-01-27 18:14:47 +01:00
clock.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
clock.h
[ARM] pxa: introduce clk support for PXA SoC clocks
2007-10-12 21:14:55 +01:00
cm-x270-pci.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
cm-x270-pci.h
[ARM] 4576/1: CM-X270 machine support
2007-10-15 18:53:57 +01:00
cm-x270.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
colibri.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
corgi_lcd.c
[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
2008-01-28 13:13:25 +00:00
corgi_pm.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
corgi_ssp.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
corgi.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
cpu-pxa.c
[ARM] eliminate MODULE_PARM() usage
2008-02-29 22:47:17 +00:00
devices.c
[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()
2008-04-19 11:29:05 +01:00
devices.h
[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()
2008-04-19 11:29:05 +01:00
dma.c
[ARM] replace remaining __FUNCTION__ occurrences
2008-03-06 12:18:18 +00:00
em-x270.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
eseries.c
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
2008-01-28 13:13:13 +00:00
generic.c
[ARM] pxa: move GPIO sysdev outside of generic.c into gpio.c
2008-04-19 11:29:04 +01:00
generic.h
[ARM] pxa: move ARRAY_AND_SIZE definition to generic.h
2008-04-19 11:29:04 +01:00
gpio.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
gumstix.c
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards
2008-04-19 11:29:06 +01:00
idp.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
irq.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
Kconfig
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards
2008-04-19 11:29:06 +01:00
leds-idp.c
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
leds-lubbock.c
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
leds-mainstone.c
Remove obsolete #include <linux/config.h>
2006-06-30 19:25:36 +02:00
leds-trizeps4.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
leds.c
[ARM] 3666/1: TRIZEPS4 [1/5] core
2006-06-29 16:25:37 +01:00
leds.h
fix file specification in comments
2006-10-03 23:01:26 +02:00
littleton.c
[ARM] pxa: add keypad support for littleton
2008-04-19 11:29:06 +01:00
lpd270.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
lubbock.c
[ARM] pxa: use new pin configuration mechanism for lubbock
2008-04-19 11:29:05 +01:00
magician.c
[ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLD
2008-04-19 11:29:07 +01:00
mainstone.c
[ARM] 4901/3: mainstone: Register primary I2C bus
2008-04-19 11:29:06 +01:00
Makefile
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards
2008-04-19 11:29:06 +01:00
Makefile.boot
Linux-2.6.12-rc2
2005-04-16 15:20:36 -07:00
mfp-pxa2xx.c
[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}
2008-04-19 11:29:05 +01:00
mfp-pxa3xx.c
[ARM] pxa: move mfp sysdev registeration out for suspend/resume order
2008-04-19 11:29:04 +01:00
pcm027.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
pcm990-baseboard.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
pm.c
[ARM] pxa: skip registers saving/restoring if entering standby mode
2008-01-26 15:07:57 +00:00
poodle.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
pxa3xx.c
[ARM] 4946/1: pxa3xx: Print an error if we refuse to suspend
2008-04-19 11:29:06 +01:00
pxa25x.c
[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}
2008-04-19 11:29:05 +01:00
pxa27x.c
[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()
2008-04-19 11:29:05 +01:00
pxa300.c
[ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com
2007-10-31 15:21:48 +00:00
pxa320.c
[ARM] 4675/1: pxa: fix mfp address definition error for pxa320
2007-11-29 20:52:54 +00:00
sharpsl_pm.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
sharpsl.h
[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
2008-01-28 13:13:25 +00:00
sleep.S
[ARM] pxa: add preliminary suspend/resume code for pxa3xx
2008-02-04 13:17:33 +00:00
smemc.c
[ARM] pxa: introduce sysdev for pxa3xx static memory controller
2008-02-04 13:17:33 +00:00
spitz_pm.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
spitz.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
ssp.c
Merge branch 'pxa-plat' into devel
2008-01-28 13:21:38 +00:00
standby.S
[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
2008-01-26 15:07:56 +00:00
time.c
[ARM] pxa: fix PXA27x resume
2008-01-26 15:07:57 +00:00
tosa.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
trizeps4.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
zylonite_pxa300.c
[ARM] pxa: move ARRAY_AND_SIZE definition to generic.h
2008-04-19 11:29:04 +01:00
zylonite_pxa320.c
[ARM] pxa: move ARRAY_AND_SIZE definition to generic.h
2008-04-19 11:29:04 +01:00
zylonite.c
[ARM] pxa: add keypad support for zylonite
2008-04-19 11:29:05 +01:00