linux_dsm_epyc7002/include/linux/context_tracking.h
Linus Torvalds 221bb8a46e - ARM: GICv3 ITS emulation and various fixes. Removal of the old
VGIC implementation.
 
 - s390: support for trapping software breakpoints, nested virtualization
 (vSIE), the STHYI opcode, initial extensions for CPU model support.
 
 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups,
 preliminary to this and the upcoming support for hardware virtualization
 extensions.
 
 - x86: support for execute-only mappings in nested EPT; reduced vmexit
 latency for TSC deadline timer (by about 30%) on Intel hosts; support for
 more than 255 vCPUs.
 
 - PPC: bugfixes.
 
 The ugly bit is the conflicts.  A couple of them are simple conflicts due
 to 4.7 fixes, but most of them are with other trees. There was definitely
 too much reliance on Acked-by here.  Some conflicts are for KVM patches
 where _I_ gave my Acked-by, but the worst are for this pull request's
 patches that touch files outside arch/*/kvm.  KVM submaintainers should
 probably learn to synchronize better with arch maintainers, with the
 latter providing topic branches whenever possible instead of Acked-by.
 This is what we do with arch/x86.  And I should learn to refuse pull
 requests when linux-next sends scary signals, even if that means that
 submaintainers have to rebase their branches.
 
 Anyhow, here's the list:
 
 - arch/x86/kvm/vmx.c: handle_pcommit and EXIT_REASON_PCOMMIT was removed
 by the nvdimm tree.  This tree adds handle_preemption_timer and
 EXIT_REASON_PREEMPTION_TIMER at the same place.  In general all mentions
 of pcommit have to go.
 
 There is also a conflict between a stable fix and this patch, where the
 stable fix removed the vmx_create_pml_buffer function and its call.
 
 - virt/kvm/kvm_main.c: kvm_cpu_notifier was removed by the hotplug tree.
 This tree adds kvm_io_bus_get_dev at the same place.
 
 - virt/kvm/arm/vgic.c: a few final bugfixes went into 4.7 before the
 file was completely removed for 4.8.
 
 - include/linux/irqchip/arm-gic-v3.h: this one is entirely our fault;
 this is a change that should have gone in through the irqchip tree and
 pulled by kvm-arm.  I think I would have rejected this kvm-arm pull
 request.  The KVM version is the right one, except that it lacks
 GITS_BASER_PAGES_SHIFT.
 
 - arch/powerpc: what a mess.  For the idle_book3s.S conflict, the KVM
 tree is the right one; everything else is trivial.  In this case I am
 not quite sure what went wrong.  The commit that is causing the mess
 (fd7bacbca4, "KVM: PPC: Book3S HV: Fix TB corruption in guest exit
 path on HMI interrupt", 2016-05-15) touches both arch/powerpc/kernel/
 and arch/powerpc/kvm/.  It's large, but at 396 insertions/5 deletions
 I guessed that it wasn't really possible to split it and that the 5
 deletions wouldn't conflict.  That wasn't the case.
 
 - arch/s390: also messy.  First is hypfs_diag.c where the KVM tree
 moved some code and the s390 tree patched it.  You have to reapply the
 relevant part of commits 6c22c98637, plus all of e030c1125e, to
 arch/s390/kernel/diag.c.  Or pick the linux-next conflict
 resolution from http://marc.info/?l=kvm&m=146717549531603&w=2.
 Second, there is a conflict in gmap.c between a stable fix and 4.8.
 The KVM version here is the correct one.
 
 I have pushed my resolution at refs/heads/merge-20160802 (commit
 3d1f53419842) at git://git.kernel.org/pub/scm/virt/kvm/kvm.git.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXoGm7AAoJEL/70l94x66DugQIAIj703ePAFepB/fCrKHkZZia
 SGrsBdvAtNsOhr7FQ5qvvjLxiv/cv7CymeuJivX8H+4kuUHUllDzey+RPHYHD9X7
 U6n1PdCH9F15a3IXc8tDjlDdOMNIKJixYuq1UyNZMU6NFwl00+TZf9JF8A2US65b
 x/41W98ilL6nNBAsoDVmCLtPNWAqQ3lajaZELGfcqRQ9ZGKcAYOaLFXHv2YHf2XC
 qIDMf+slBGSQ66UoATnYV2gAopNlWbZ7n0vO6tE2KyvhHZ1m399aBX1+k8la/0JI
 69r+Tz7ZHUSFtmlmyByi5IAB87myy2WQHyAPwj+4vwJkDGPcl0TrupzbG7+T05Y=
 =42ti
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:

 - ARM: GICv3 ITS emulation and various fixes.  Removal of the
   old VGIC implementation.

 - s390: support for trapping software breakpoints, nested
   virtualization (vSIE), the STHYI opcode, initial extensions
   for CPU model support.

 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots
   of cleanups, preliminary to this and the upcoming support for
   hardware virtualization extensions.

 - x86: support for execute-only mappings in nested EPT; reduced
   vmexit latency for TSC deadline timer (by about 30%) on Intel
   hosts; support for more than 255 vCPUs.

 - PPC: bugfixes.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
  KVM: PPC: Introduce KVM_CAP_PPC_HTM
  MIPS: Select HAVE_KVM for MIPS64_R{2,6}
  MIPS: KVM: Reset CP0_PageMask during host TLB flush
  MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
  MIPS: KVM: Sign extend MFC0/RDHWR results
  MIPS: KVM: Fix 64-bit big endian dynamic translation
  MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
  MIPS: KVM: Use 64-bit CP0_EBase when appropriate
  MIPS: KVM: Set CP0_Status.KX on MIPS64
  MIPS: KVM: Make entry code MIPS64 friendly
  MIPS: KVM: Use kmap instead of CKSEG0ADDR()
  MIPS: KVM: Use virt_to_phys() to get commpage PFN
  MIPS: Fix definition of KSEGX() for 64-bit
  KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
  kvm: x86: nVMX: maintain internal copy of current VMCS
  KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
  KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
  KVM: arm64: vgic-its: Simplify MAPI error handling
  KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
  KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
  ...
2016-08-02 16:11:27 -04:00

175 lines
4.4 KiB
C

#ifndef _LINUX_CONTEXT_TRACKING_H
#define _LINUX_CONTEXT_TRACKING_H
#include <linux/sched.h>
#include <linux/vtime.h>
#include <linux/context_tracking_state.h>
#include <asm/ptrace.h>
#ifdef CONFIG_CONTEXT_TRACKING
extern void context_tracking_cpu_set(int cpu);
/* Called with interrupts disabled. */
extern void __context_tracking_enter(enum ctx_state state);
extern void __context_tracking_exit(enum ctx_state state);
extern void context_tracking_enter(enum ctx_state state);
extern void context_tracking_exit(enum ctx_state state);
extern void context_tracking_user_enter(void);
extern void context_tracking_user_exit(void);
static inline void user_enter(void)
{
if (context_tracking_is_enabled())
context_tracking_enter(CONTEXT_USER);
}
static inline void user_exit(void)
{
if (context_tracking_is_enabled())
context_tracking_exit(CONTEXT_USER);
}
/* Called with interrupts disabled. */
static inline void user_enter_irqoff(void)
{
if (context_tracking_is_enabled())
__context_tracking_enter(CONTEXT_USER);
}
static inline void user_exit_irqoff(void)
{
if (context_tracking_is_enabled())
__context_tracking_exit(CONTEXT_USER);
}
static inline enum ctx_state exception_enter(void)
{
enum ctx_state prev_ctx;
if (!context_tracking_is_enabled())
return 0;
prev_ctx = this_cpu_read(context_tracking.state);
if (prev_ctx != CONTEXT_KERNEL)
context_tracking_exit(prev_ctx);
return prev_ctx;
}
static inline void exception_exit(enum ctx_state prev_ctx)
{
if (context_tracking_is_enabled()) {
if (prev_ctx != CONTEXT_KERNEL)
context_tracking_enter(prev_ctx);
}
}
/**
* ct_state() - return the current context tracking state if known
*
* Returns the current cpu's context tracking state if context tracking
* is enabled. If context tracking is disabled, returns
* CONTEXT_DISABLED. This should be used primarily for debugging.
*/
static inline enum ctx_state ct_state(void)
{
return context_tracking_is_enabled() ?
this_cpu_read(context_tracking.state) : CONTEXT_DISABLED;
}
#else
static inline void user_enter(void) { }
static inline void user_exit(void) { }
static inline void user_enter_irqoff(void) { }
static inline void user_exit_irqoff(void) { }
static inline enum ctx_state exception_enter(void) { return 0; }
static inline void exception_exit(enum ctx_state prev_ctx) { }
static inline enum ctx_state ct_state(void) { return CONTEXT_DISABLED; }
#endif /* !CONFIG_CONTEXT_TRACKING */
#define CT_WARN_ON(cond) WARN_ON(context_tracking_is_enabled() && (cond))
#ifdef CONFIG_CONTEXT_TRACKING_FORCE
extern void context_tracking_init(void);
#else
static inline void context_tracking_init(void) { }
#endif /* CONFIG_CONTEXT_TRACKING_FORCE */
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
/* must be called with irqs disabled */
static inline void guest_enter_irqoff(void)
{
if (vtime_accounting_cpu_enabled())
vtime_guest_enter(current);
else
current->flags |= PF_VCPU;
if (context_tracking_is_enabled())
__context_tracking_enter(CONTEXT_GUEST);
/* KVM does not hold any references to rcu protected data when it
* switches CPU into a guest mode. In fact switching to a guest mode
* is very similar to exiting to userspace from rcu point of view. In
* addition CPU may stay in a guest mode for quite a long time (up to
* one time slice). Lets treat guest mode as quiescent state, just like
* we do with user-mode execution.
*/
if (!context_tracking_cpu_is_enabled())
rcu_virt_note_context_switch(smp_processor_id());
}
static inline void guest_exit_irqoff(void)
{
if (context_tracking_is_enabled())
__context_tracking_exit(CONTEXT_GUEST);
if (vtime_accounting_cpu_enabled())
vtime_guest_exit(current);
else
current->flags &= ~PF_VCPU;
}
#else
static inline void guest_enter_irqoff(void)
{
/*
* This is running in ioctl context so its safe
* to assume that it's the stime pending cputime
* to flush.
*/
vtime_account_system(current);
current->flags |= PF_VCPU;
rcu_virt_note_context_switch(smp_processor_id());
}
static inline void guest_exit_irqoff(void)
{
/* Flush the guest cputime we spent on the guest */
vtime_account_system(current);
current->flags &= ~PF_VCPU;
}
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */
static inline void guest_enter(void)
{
unsigned long flags;
local_irq_save(flags);
guest_enter_irqoff();
local_irq_restore(flags);
}
static inline void guest_exit(void)
{
unsigned long flags;
local_irq_save(flags);
guest_exit_irqoff();
local_irq_restore(flags);
}
#endif