mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
f352c72512
Based on a patch by Benjamin Herrenschmidt <benh@kernel.crashing.org> Modernized and slightly modified to not record erros into the nvram log since we do not have that device driver just yet. Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
1134 lines
33 KiB
C
1134 lines
33 KiB
C
/*
|
|
* Copyright 2010 Ben Herrenschmidt, IBM Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#define DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/debugfs.h>
|
|
|
|
#include <asm/sections.h>
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/ppc-pci.h>
|
|
#include <asm/iommu.h>
|
|
#include <asm/io-workarounds.h>
|
|
|
|
#include "wsp.h"
|
|
#include "wsp_pci.h"
|
|
#include "msi.h"
|
|
|
|
|
|
/* Max number of TVTs for one table. Only 32-bit tables can use
|
|
* multiple TVTs and so the max currently supported is thus 8
|
|
* since only 2G of DMA space is supported
|
|
*/
|
|
#define MAX_TABLE_TVT_COUNT 8
|
|
|
|
struct wsp_dma_table {
|
|
struct list_head link;
|
|
struct iommu_table table;
|
|
struct wsp_phb *phb;
|
|
struct page *tces[MAX_TABLE_TVT_COUNT];
|
|
};
|
|
|
|
/* We support DMA regions from 0...2G in 32bit space (no support for
|
|
* 64-bit DMA just yet). Each device gets a separate TCE table (TVT
|
|
* entry) with validation enabled (though not supported by SimiCS
|
|
* just yet).
|
|
*
|
|
* To simplify things, we divide this 2G space into N regions based
|
|
* on the constant below which could be turned into a tunable eventually
|
|
*
|
|
* We then assign dynamically those regions to devices as they show up.
|
|
*
|
|
* We use a bitmap as an allocator for these.
|
|
*
|
|
* Tables are allocated/created dynamically as devices are discovered,
|
|
* multiple TVT entries are used if needed
|
|
*
|
|
* When 64-bit DMA support is added we should simply use a separate set
|
|
* of larger regions (the HW supports 64 TVT entries). We can
|
|
* additionally create a bypass region in 64-bit space for performances
|
|
* though that would have a cost in term of security.
|
|
*
|
|
* If you set NUM_DMA32_REGIONS to 1, then a single table is shared
|
|
* for all devices and bus/dev/fn validation is disabled
|
|
*
|
|
* Note that a DMA32 region cannot be smaller than 256M so the max
|
|
* supported here for now is 8. We don't yet support sharing regions
|
|
* between multiple devices so the max number of devices supported
|
|
* is MAX_TABLE_TVT_COUNT.
|
|
*/
|
|
#define NUM_DMA32_REGIONS 1
|
|
|
|
struct wsp_phb {
|
|
struct pci_controller *hose;
|
|
|
|
/* Lock controlling access to the list of dma tables.
|
|
* It does -not- protect against dma_* operations on
|
|
* those tables, those should be stopped before an entry
|
|
* is removed from the list.
|
|
*
|
|
* The lock is also used for error handling operations
|
|
*/
|
|
spinlock_t lock;
|
|
struct list_head dma_tables;
|
|
unsigned long dma32_map;
|
|
unsigned long dma32_base;
|
|
unsigned int dma32_num_regions;
|
|
unsigned long dma32_region_size;
|
|
|
|
/* Debugfs stuff */
|
|
struct dentry *ddir;
|
|
|
|
struct list_head all;
|
|
};
|
|
static LIST_HEAD(wsp_phbs);
|
|
|
|
//#define cfg_debug(fmt...) pr_debug(fmt)
|
|
#define cfg_debug(fmt...)
|
|
|
|
|
|
static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
int offset, int len, u32 *val)
|
|
{
|
|
struct pci_controller *hose;
|
|
int suboff;
|
|
u64 addr;
|
|
|
|
hose = pci_bus_to_host(bus);
|
|
if (hose == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
if (offset >= 0x1000)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
addr = PCIE_REG_CA_ENABLE |
|
|
((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
|
|
((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
|
|
((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
|
|
suboff = offset & 3;
|
|
|
|
/*
|
|
* Note: the caller has already checked that offset is
|
|
* suitably aligned and that len is 1, 2 or 4.
|
|
*/
|
|
|
|
switch (len) {
|
|
case 1:
|
|
addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
|
|
out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
|
|
*val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
|
|
>> (suboff << 3)) & 0xff;
|
|
cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
|
|
bus->number, devfn >> 3, devfn & 7,
|
|
offset, suboff, addr, *val);
|
|
break;
|
|
case 2:
|
|
addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
|
|
out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
|
|
*val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
|
|
>> (suboff << 3)) & 0xffff;
|
|
cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
|
|
bus->number, devfn >> 3, devfn & 7,
|
|
offset, suboff, addr, *val);
|
|
break;
|
|
default:
|
|
addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
|
|
out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
|
|
*val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA);
|
|
cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
|
|
bus->number, devfn >> 3, devfn & 7,
|
|
offset, suboff, addr, *val);
|
|
break;
|
|
}
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
int offset, int len, u32 val)
|
|
{
|
|
struct pci_controller *hose;
|
|
int suboff;
|
|
u64 addr;
|
|
|
|
hose = pci_bus_to_host(bus);
|
|
if (hose == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
if (offset >= 0x1000)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
addr = PCIE_REG_CA_ENABLE |
|
|
((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
|
|
((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
|
|
((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
|
|
suboff = offset & 3;
|
|
|
|
/*
|
|
* Note: the caller has already checked that offset is
|
|
* suitably aligned and that len is 1, 2 or 4.
|
|
*/
|
|
switch (len) {
|
|
case 1:
|
|
addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
|
|
val <<= suboff << 3;
|
|
out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
|
|
out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
|
|
cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
|
|
bus->number, devfn >> 3, devfn & 7,
|
|
offset, suboff, addr, val);
|
|
break;
|
|
case 2:
|
|
addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
|
|
val <<= suboff << 3;
|
|
out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
|
|
out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
|
|
cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
|
|
bus->number, devfn >> 3, devfn & 7,
|
|
offset, suboff, addr, val);
|
|
break;
|
|
default:
|
|
addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
|
|
out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
|
|
out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
|
|
cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
|
|
bus->number, devfn >> 3, devfn & 7,
|
|
offset, suboff, addr, val);
|
|
break;
|
|
}
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops wsp_pcie_pci_ops =
|
|
{
|
|
.read = wsp_pcie_read_config,
|
|
.write = wsp_pcie_write_config,
|
|
};
|
|
|
|
#define TCE_SHIFT 12
|
|
#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
|
|
#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */
|
|
#define TCE_PCI_READ 0x1 /* read from PCI allowed */
|
|
#define TCE_RPN_MASK 0x3fffffffffful /* 42-bit RPN (4K pages) */
|
|
#define TCE_RPN_SHIFT 12
|
|
|
|
//#define dma_debug(fmt...) pr_debug(fmt)
|
|
#define dma_debug(fmt...)
|
|
|
|
static int tce_build_wsp(struct iommu_table *tbl, long index, long npages,
|
|
unsigned long uaddr, enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
struct wsp_dma_table *ptbl = container_of(tbl,
|
|
struct wsp_dma_table,
|
|
table);
|
|
u64 proto_tce;
|
|
u64 *tcep;
|
|
u64 rpn;
|
|
|
|
proto_tce = TCE_PCI_READ;
|
|
#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
|
|
proto_tce |= TCE_PCI_WRITE;
|
|
#else
|
|
if (direction != DMA_TO_DEVICE)
|
|
proto_tce |= TCE_PCI_WRITE;
|
|
#endif
|
|
|
|
/* XXX Make this faster by factoring out the page address for
|
|
* within a TCE table
|
|
*/
|
|
while (npages--) {
|
|
/* We don't use it->base as the table can be scattered */
|
|
tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
|
|
tcep += (index & 0xffff);
|
|
|
|
/* can't move this out since we might cross LMB boundary */
|
|
rpn = __pa(uaddr) >> TCE_SHIFT;
|
|
*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
|
|
|
|
dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n",
|
|
tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT);
|
|
|
|
uaddr += TCE_PAGE_SIZE;
|
|
index++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void tce_free_wsp(struct iommu_table *tbl, long index, long npages)
|
|
{
|
|
struct wsp_dma_table *ptbl = container_of(tbl,
|
|
struct wsp_dma_table,
|
|
table);
|
|
#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
|
|
struct pci_controller *hose = ptbl->phb->hose;
|
|
#endif
|
|
u64 *tcep;
|
|
|
|
/* XXX Make this faster by factoring out the page address for
|
|
* within a TCE table. Also use line-kill option to kill multiple
|
|
* TCEs at once
|
|
*/
|
|
while (npages--) {
|
|
/* We don't use it->base as the table can be scattered */
|
|
tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
|
|
tcep += (index & 0xffff);
|
|
dma_debug("[DMA] TCE %p cleared\n", tcep);
|
|
*tcep = 0;
|
|
#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
|
|
/* Don't write there since it would pollute other MMIO accesses */
|
|
out_be64(hose->cfg_data + PCIE_REG_TCE_KILL,
|
|
PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K |
|
|
(__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK));
|
|
#endif
|
|
index++;
|
|
}
|
|
}
|
|
|
|
static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb,
|
|
unsigned int region,
|
|
struct pci_dev *validate)
|
|
{
|
|
struct pci_controller *hose = phb->hose;
|
|
unsigned long size = phb->dma32_region_size;
|
|
unsigned long addr = phb->dma32_region_size * region + phb->dma32_base;
|
|
struct wsp_dma_table *tbl;
|
|
int tvts_per_table, i, tvt, nid;
|
|
unsigned long flags;
|
|
|
|
nid = of_node_to_nid(phb->hose->dn);
|
|
|
|
/* Calculate how many TVTs are needed */
|
|
tvts_per_table = size / 0x10000000;
|
|
if (tvts_per_table == 0)
|
|
tvts_per_table = 1;
|
|
|
|
/* Calculate the base TVT index. We know all tables have the same
|
|
* size so we just do a simple multiply here
|
|
*/
|
|
tvt = region * tvts_per_table;
|
|
|
|
pr_debug(" Region : %d\n", region);
|
|
pr_debug(" DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1);
|
|
pr_debug(" Number of TVTs : %d\n", tvts_per_table);
|
|
pr_debug(" Base TVT : %d\n", tvt);
|
|
pr_debug(" Node : %d\n", nid);
|
|
|
|
tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid);
|
|
if (!tbl)
|
|
return ERR_PTR(-ENOMEM);
|
|
tbl->phb = phb;
|
|
|
|
/* Create as many TVTs as needed, each represents 256M at most */
|
|
for (i = 0; i < tvts_per_table; i++) {
|
|
u64 tvt_data1, tvt_data0;
|
|
|
|
/* Allocate table. We use a 4K TCE size for now always so
|
|
* one table is always 8 * (258M / 4K) == 512K
|
|
*/
|
|
tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000));
|
|
if (tbl->tces[i] == NULL)
|
|
goto fail;
|
|
memset(page_address(tbl->tces[i]), 0, 0x80000);
|
|
|
|
pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i]));
|
|
|
|
/* Table size. We currently set it to be the whole 256M region */
|
|
tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT;
|
|
/* IO page size set to 4K */
|
|
tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT;
|
|
/* Shift in the address */
|
|
tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT;
|
|
|
|
/* Validation stuff. We only validate fully bus/dev/fn for now
|
|
* one day maybe we can group devices but that isn't the case
|
|
* at the moment
|
|
*/
|
|
if (validate) {
|
|
tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK;
|
|
tvt_data0 |= validate->bus->number;
|
|
tvt_data1 |= IODA_TVT1_DEVNUM_VALID;
|
|
tvt_data1 |= ((u64)PCI_SLOT(validate->devfn))
|
|
<< IODA_TVT1_DEVNUM_VALUE_SHIFT;
|
|
tvt_data1 |= IODA_TVT1_FUNCNUM_VALID;
|
|
tvt_data1 |= ((u64)PCI_FUNC(validate->devfn))
|
|
<< IODA_TVT1_FUNCNUM_VALUE_SHIFT;
|
|
}
|
|
|
|
/* XX PE number is always 0 for now */
|
|
|
|
/* Program the values using the PHB lock */
|
|
spin_lock_irqsave(&phb->lock, flags);
|
|
out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
|
|
(tvt + i) | PCIE_REG_IODA_AD_TBL_TVT);
|
|
out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1);
|
|
out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0);
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
}
|
|
|
|
/* Init bits and pieces */
|
|
tbl->table.it_blocksize = 16;
|
|
tbl->table.it_offset = addr >> IOMMU_PAGE_SHIFT;
|
|
tbl->table.it_size = size >> IOMMU_PAGE_SHIFT;
|
|
|
|
/*
|
|
* It's already blank but we clear it anyway.
|
|
* Consider an aditiona interface that makes cleaing optional
|
|
*/
|
|
iommu_init_table(&tbl->table, nid);
|
|
|
|
list_add(&tbl->link, &phb->dma_tables);
|
|
return tbl;
|
|
|
|
fail:
|
|
pr_debug(" Failed to allocate a 256M TCE table !\n");
|
|
for (i = 0; i < tvts_per_table; i++)
|
|
if (tbl->tces[i])
|
|
__free_pages(tbl->tces[i], get_order(0x80000));
|
|
kfree(tbl);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
static void __devinit wsp_pci_dma_dev_setup(struct pci_dev *pdev)
|
|
{
|
|
struct dev_archdata *archdata = &pdev->dev.archdata;
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct wsp_phb *phb = hose->private_data;
|
|
struct wsp_dma_table *table = NULL;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
/* Don't assign an iommu table to a bridge */
|
|
if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
|
|
return;
|
|
|
|
pr_debug("%s: Setting up DMA...\n", pci_name(pdev));
|
|
|
|
spin_lock_irqsave(&phb->lock, flags);
|
|
|
|
/* If only one region, check if it already exist */
|
|
if (phb->dma32_num_regions == 1) {
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
if (list_empty(&phb->dma_tables))
|
|
table = wsp_pci_create_dma32_table(phb, 0, NULL);
|
|
else
|
|
table = list_first_entry(&phb->dma_tables,
|
|
struct wsp_dma_table,
|
|
link);
|
|
} else {
|
|
/* else find a free region */
|
|
for (i = 0; i < phb->dma32_num_regions && !table; i++) {
|
|
if (__test_and_set_bit(i, &phb->dma32_map))
|
|
continue;
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
table = wsp_pci_create_dma32_table(phb, i, pdev);
|
|
}
|
|
}
|
|
|
|
/* Check if we got an error */
|
|
if (IS_ERR(table)) {
|
|
pr_err("%s: Failed to create DMA table, err %ld !\n",
|
|
pci_name(pdev), PTR_ERR(table));
|
|
return;
|
|
}
|
|
|
|
/* Or a valid table */
|
|
if (table) {
|
|
pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n",
|
|
pci_name(pdev),
|
|
table->table.it_offset << IOMMU_PAGE_SHIFT,
|
|
(table->table.it_offset << IOMMU_PAGE_SHIFT)
|
|
+ phb->dma32_region_size - 1);
|
|
archdata->dma_data.iommu_table_base = &table->table;
|
|
return;
|
|
}
|
|
|
|
/* Or no room */
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
pr_err("%s: Out of DMA space !\n", pci_name(pdev));
|
|
}
|
|
|
|
static void __init wsp_pcie_configure_hw(struct pci_controller *hose)
|
|
{
|
|
u64 val;
|
|
int i;
|
|
|
|
#define DUMP_REG(x) \
|
|
pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
|
|
|
|
#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
|
|
/* WSP DD1 has a bogus class code by default in the PCI-E
|
|
* root complex's built-in P2P bridge */
|
|
val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
|
|
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
|
|
out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
|
|
(val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
|
|
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
|
|
#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
|
|
|
|
#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
|
|
/* XXX Disable TCE caching, it doesn't work on DD1 */
|
|
out_be64(hose->cfg_data + 0xe50,
|
|
in_be64(hose->cfg_data + 0xe50) | (3ull << 62));
|
|
printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50));
|
|
#endif
|
|
|
|
/* Configure M32A and IO. IO is hard wired to be 1M for now */
|
|
out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys);
|
|
out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK,
|
|
(~(hose->io_resource.end - hose->io_resource.start)) &
|
|
0x3fffffff000ul);
|
|
out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1);
|
|
|
|
out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR,
|
|
hose->mem_resources[0].start);
|
|
printk("Want to write to M32A_BASE_MASK : 0x%llx\n",
|
|
(~(hose->mem_resources[0].end -
|
|
hose->mem_resources[0].start)) & 0x3ffffff0000ul);
|
|
out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK,
|
|
(~(hose->mem_resources[0].end -
|
|
hose->mem_resources[0].start)) & 0x3ffffff0000ul);
|
|
out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR,
|
|
(hose->mem_resources[0].start - hose->pci_mem_offset) | 1);
|
|
|
|
/* Clear all TVT entries
|
|
*
|
|
* XX Might get TVT count from device-tree
|
|
*/
|
|
for (i = 0; i < IODA_TVT_COUNT; i++) {
|
|
out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
|
|
PCIE_REG_IODA_AD_TBL_TVT | i);
|
|
out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0);
|
|
out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0);
|
|
}
|
|
|
|
/* Kill the TCE cache */
|
|
out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG,
|
|
in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) |
|
|
PCIE_REG_PHBC_64B_TCE_EN);
|
|
|
|
/* Enable 32 & 64-bit MSIs, IO space and M32A */
|
|
val = PCIE_REG_PHBC_32BIT_MSI_EN |
|
|
PCIE_REG_PHBC_IO_EN |
|
|
PCIE_REG_PHBC_64BIT_MSI_EN |
|
|
PCIE_REG_PHBC_M32A_EN;
|
|
if (iommu_is_off)
|
|
val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS;
|
|
pr_debug("Will write config: 0x%llx\n", val);
|
|
out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val);
|
|
|
|
/* Enable error reporting */
|
|
out_be64(hose->cfg_data + 0xe00,
|
|
in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull);
|
|
|
|
/* Mask an error that's generated when doing config space probe
|
|
*
|
|
* XXX Maybe we should only mask it around config space cycles... that or
|
|
* ignore it when we know we had a config space cycle recently ?
|
|
*/
|
|
out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull);
|
|
out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull);
|
|
|
|
/* Enable UTL errors, for now, all of them got to UTL irq 1
|
|
*
|
|
* We similarily mask one UTL error caused apparently during normal
|
|
* probing. We also mask the link up error
|
|
*/
|
|
out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0);
|
|
out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0);
|
|
out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0);
|
|
out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull);
|
|
out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull);
|
|
out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull);
|
|
|
|
DUMP_REG(PCIE_REG_IO_BASE_ADDR);
|
|
DUMP_REG(PCIE_REG_IO_BASE_MASK);
|
|
DUMP_REG(PCIE_REG_IO_START_ADDR);
|
|
DUMP_REG(PCIE_REG_M32A_BASE_ADDR);
|
|
DUMP_REG(PCIE_REG_M32A_BASE_MASK);
|
|
DUMP_REG(PCIE_REG_M32A_START_ADDR);
|
|
DUMP_REG(PCIE_REG_M32B_BASE_ADDR);
|
|
DUMP_REG(PCIE_REG_M32B_BASE_MASK);
|
|
DUMP_REG(PCIE_REG_M32B_START_ADDR);
|
|
DUMP_REG(PCIE_REG_M64_BASE_ADDR);
|
|
DUMP_REG(PCIE_REG_M64_BASE_MASK);
|
|
DUMP_REG(PCIE_REG_M64_START_ADDR);
|
|
DUMP_REG(PCIE_REG_PHB_CONFIG);
|
|
}
|
|
|
|
static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port)
|
|
{
|
|
u64 val;
|
|
int i;
|
|
|
|
for (i = 0; i < 10000; i++) {
|
|
val = in_be64(phb->hose->cfg_data + 0xe08);
|
|
if ((val & 0x1900000000000000ull) == 0x0100000000000000ull)
|
|
return;
|
|
udelay(1);
|
|
}
|
|
pr_warning("PCI IO timeout on domain %d port 0x%lx\n",
|
|
phb->hose->global_number, port);
|
|
}
|
|
|
|
#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa) \
|
|
static ret wsp_pci_##name at \
|
|
{ \
|
|
struct iowa_bus *bus; \
|
|
struct wsp_phb *phb; \
|
|
unsigned long flags; \
|
|
ret rval; \
|
|
bus = iowa_pio_find_bus(aa); \
|
|
WARN_ON(!bus); \
|
|
phb = bus->private; \
|
|
spin_lock_irqsave(&phb->lock, flags); \
|
|
wsp_pci_wait_io_idle(phb, aa); \
|
|
rval = __do_##name al; \
|
|
spin_unlock_irqrestore(&phb->lock, flags); \
|
|
return rval; \
|
|
}
|
|
|
|
#define DEF_PCI_AC_NORET_pio(name, at, al, aa) \
|
|
static void wsp_pci_##name at \
|
|
{ \
|
|
struct iowa_bus *bus; \
|
|
struct wsp_phb *phb; \
|
|
unsigned long flags; \
|
|
bus = iowa_pio_find_bus(aa); \
|
|
WARN_ON(!bus); \
|
|
phb = bus->private; \
|
|
spin_lock_irqsave(&phb->lock, flags); \
|
|
wsp_pci_wait_io_idle(phb, aa); \
|
|
__do_##name al; \
|
|
spin_unlock_irqrestore(&phb->lock, flags); \
|
|
}
|
|
|
|
#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa)
|
|
#define DEF_PCI_AC_NORET_mem(name, at, al, aa)
|
|
|
|
#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
|
|
DEF_PCI_AC_RET_##space(name, ret, at, al, aa)
|
|
|
|
#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
|
|
DEF_PCI_AC_NORET_##space(name, at, al, aa) \
|
|
|
|
|
|
#include <asm/io-defs.h>
|
|
|
|
#undef DEF_PCI_AC_RET
|
|
#undef DEF_PCI_AC_NORET
|
|
|
|
static struct ppc_pci_io wsp_pci_iops = {
|
|
.inb = wsp_pci_inb,
|
|
.inw = wsp_pci_inw,
|
|
.inl = wsp_pci_inl,
|
|
.outb = wsp_pci_outb,
|
|
.outw = wsp_pci_outw,
|
|
.outl = wsp_pci_outl,
|
|
.insb = wsp_pci_insb,
|
|
.insw = wsp_pci_insw,
|
|
.insl = wsp_pci_insl,
|
|
.outsb = wsp_pci_outsb,
|
|
.outsw = wsp_pci_outsw,
|
|
.outsl = wsp_pci_outsl,
|
|
};
|
|
|
|
static int __init wsp_setup_one_phb(struct device_node *np)
|
|
{
|
|
struct pci_controller *hose;
|
|
struct wsp_phb *phb;
|
|
|
|
pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name);
|
|
|
|
phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL);
|
|
if (!phb)
|
|
return -ENOMEM;
|
|
hose = pcibios_alloc_controller(np);
|
|
if (!hose) {
|
|
/* Can't really free the phb */
|
|
return -ENOMEM;
|
|
}
|
|
hose->private_data = phb;
|
|
phb->hose = hose;
|
|
|
|
INIT_LIST_HEAD(&phb->dma_tables);
|
|
spin_lock_init(&phb->lock);
|
|
|
|
/* XXX Use bus-range property ? */
|
|
hose->first_busno = 0;
|
|
hose->last_busno = 0xff;
|
|
|
|
/* We use cfg_data as the address for the whole bridge MMIO space
|
|
*/
|
|
hose->cfg_data = of_iomap(hose->dn, 0);
|
|
|
|
pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data);
|
|
|
|
/* Get the ranges of the device-tree */
|
|
pci_process_bridge_OF_ranges(hose, np, 0);
|
|
|
|
/* XXX Force re-assigning of everything for now */
|
|
pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC |
|
|
PCI_ENABLE_PROC_DOMAINS);
|
|
pci_probe_only = 0;
|
|
|
|
/* Calculate how the TCE space is divided */
|
|
phb->dma32_base = 0;
|
|
phb->dma32_num_regions = NUM_DMA32_REGIONS;
|
|
if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) {
|
|
pr_warning("IOMMU: Clamped to %d DMA32 regions\n",
|
|
MAX_TABLE_TVT_COUNT);
|
|
phb->dma32_num_regions = MAX_TABLE_TVT_COUNT;
|
|
}
|
|
phb->dma32_region_size = 0x80000000 / phb->dma32_num_regions;
|
|
|
|
BUG_ON(!is_power_of_2(phb->dma32_region_size));
|
|
|
|
/* Setup config ops */
|
|
hose->ops = &wsp_pcie_pci_ops;
|
|
|
|
/* Configure the HW */
|
|
wsp_pcie_configure_hw(hose);
|
|
|
|
/* Instanciate IO workarounds */
|
|
iowa_register_bus(hose, &wsp_pci_iops, NULL, phb);
|
|
#ifdef CONFIG_PCI_MSI
|
|
wsp_setup_phb_msi(hose);
|
|
#endif
|
|
|
|
/* Add to global list */
|
|
list_add(&phb->all, &wsp_phbs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init wsp_setup_pci(void)
|
|
{
|
|
struct device_node *np;
|
|
int rc;
|
|
|
|
/* Find host bridges */
|
|
for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) {
|
|
rc = wsp_setup_one_phb(np);
|
|
if (rc)
|
|
pr_err("Failed to setup PCIe bridge %s, rc=%d\n",
|
|
np->full_name, rc);
|
|
}
|
|
|
|
/* Establish device-tree linkage */
|
|
pci_devs_phb_init();
|
|
|
|
/* Set DMA ops to use TCEs */
|
|
if (iommu_is_off) {
|
|
pr_info("PCI-E: Disabled TCEs, using direct DMA\n");
|
|
set_pci_dma_ops(&dma_direct_ops);
|
|
} else {
|
|
ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup;
|
|
ppc_md.tce_build = tce_build_wsp;
|
|
ppc_md.tce_free = tce_free_wsp;
|
|
set_pci_dma_ops(&dma_iommu_ops);
|
|
}
|
|
}
|
|
|
|
#define err_debug(fmt...) pr_debug(fmt)
|
|
//#define err_debug(fmt...)
|
|
|
|
static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np)
|
|
{
|
|
const u32 *prop;
|
|
int hw_irq;
|
|
|
|
/* Ok, no interrupts property, let's try to find our child P2P */
|
|
np = of_get_next_child(np, NULL);
|
|
if (np == NULL)
|
|
return 0;
|
|
|
|
/* Grab it's interrupt map */
|
|
prop = of_get_property(np, "interrupt-map", NULL);
|
|
if (prop == NULL)
|
|
return 0;
|
|
|
|
/* Grab one of the interrupts in there, keep the low 4 bits */
|
|
hw_irq = prop[5] & 0xf;
|
|
|
|
/* 0..4 for PHB 0 and 5..9 for PHB 1 */
|
|
if (hw_irq < 5)
|
|
hw_irq = 4;
|
|
else
|
|
hw_irq = 9;
|
|
hw_irq |= prop[5] & ~0xf;
|
|
|
|
err_debug("PCI: Using 0x%x as error IRQ for %s\n",
|
|
hw_irq, np->parent->full_name);
|
|
return irq_create_mapping(NULL, hw_irq);
|
|
}
|
|
|
|
static const struct {
|
|
u32 offset;
|
|
const char *name;
|
|
} wsp_pci_regs[] = {
|
|
#define DREG(x) { PCIE_REG_##x, #x }
|
|
#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x }
|
|
/* Architected registers except CONFIG_ and IODA
|
|
* to avoid side effects
|
|
*/
|
|
DREG(DMA_CHAN_STATUS),
|
|
DREG(CPU_LOADSTORE_STATUS),
|
|
DREG(LOCK0),
|
|
DREG(LOCK1),
|
|
DREG(PHB_CONFIG),
|
|
DREG(IO_BASE_ADDR),
|
|
DREG(IO_BASE_MASK),
|
|
DREG(IO_START_ADDR),
|
|
DREG(M32A_BASE_ADDR),
|
|
DREG(M32A_BASE_MASK),
|
|
DREG(M32A_START_ADDR),
|
|
DREG(M32B_BASE_ADDR),
|
|
DREG(M32B_BASE_MASK),
|
|
DREG(M32B_START_ADDR),
|
|
DREG(M64_BASE_ADDR),
|
|
DREG(M64_BASE_MASK),
|
|
DREG(M64_START_ADDR),
|
|
DREG(TCE_KILL),
|
|
DREG(LOCK2),
|
|
DREG(PHB_GEN_CAP),
|
|
DREG(PHB_TCE_CAP),
|
|
DREG(PHB_IRQ_CAP),
|
|
DREG(PHB_EEH_CAP),
|
|
DREG(PAPR_ERR_INJ_CONTROL),
|
|
DREG(PAPR_ERR_INJ_ADDR),
|
|
DREG(PAPR_ERR_INJ_MASK),
|
|
|
|
/* UTL core regs */
|
|
DUTL(SYS_BUS_CONTROL),
|
|
DUTL(STATUS),
|
|
DUTL(SYS_BUS_AGENT_STATUS),
|
|
DUTL(SYS_BUS_AGENT_ERR_SEV),
|
|
DUTL(SYS_BUS_AGENT_IRQ_EN),
|
|
DUTL(SYS_BUS_BURST_SZ_CONF),
|
|
DUTL(REVISION_ID),
|
|
DUTL(OUT_POST_HDR_BUF_ALLOC),
|
|
DUTL(OUT_POST_DAT_BUF_ALLOC),
|
|
DUTL(IN_POST_HDR_BUF_ALLOC),
|
|
DUTL(IN_POST_DAT_BUF_ALLOC),
|
|
DUTL(OUT_NP_BUF_ALLOC),
|
|
DUTL(IN_NP_BUF_ALLOC),
|
|
DUTL(PCIE_TAGS_ALLOC),
|
|
DUTL(GBIF_READ_TAGS_ALLOC),
|
|
|
|
DUTL(PCIE_PORT_CONTROL),
|
|
DUTL(PCIE_PORT_STATUS),
|
|
DUTL(PCIE_PORT_ERROR_SEV),
|
|
DUTL(PCIE_PORT_IRQ_EN),
|
|
DUTL(RC_STATUS),
|
|
DUTL(RC_ERR_SEVERITY),
|
|
DUTL(RC_IRQ_EN),
|
|
DUTL(EP_STATUS),
|
|
DUTL(EP_ERR_SEVERITY),
|
|
DUTL(EP_ERR_IRQ_EN),
|
|
DUTL(PCI_PM_CTRL1),
|
|
DUTL(PCI_PM_CTRL2),
|
|
|
|
/* PCIe stack regs */
|
|
DREG(SYSTEM_CONFIG1),
|
|
DREG(SYSTEM_CONFIG2),
|
|
DREG(EP_SYSTEM_CONFIG),
|
|
DREG(EP_FLR),
|
|
DREG(EP_BAR_CONFIG),
|
|
DREG(LINK_CONFIG),
|
|
DREG(PM_CONFIG),
|
|
DREG(DLP_CONTROL),
|
|
DREG(DLP_STATUS),
|
|
DREG(ERR_REPORT_CONTROL),
|
|
DREG(SLOT_CONTROL1),
|
|
DREG(SLOT_CONTROL2),
|
|
DREG(UTL_CONFIG),
|
|
DREG(BUFFERS_CONFIG),
|
|
DREG(ERROR_INJECT),
|
|
DREG(SRIOV_CONFIG),
|
|
DREG(PF0_SRIOV_STATUS),
|
|
DREG(PF1_SRIOV_STATUS),
|
|
DREG(PORT_NUMBER),
|
|
DREG(POR_SYSTEM_CONFIG),
|
|
|
|
/* Internal logic regs */
|
|
DREG(PHB_VERSION),
|
|
DREG(RESET),
|
|
DREG(PHB_CONTROL),
|
|
DREG(PHB_TIMEOUT_CONTROL1),
|
|
DREG(PHB_QUIESCE_DMA),
|
|
DREG(PHB_DMA_READ_TAG_ACTV),
|
|
DREG(PHB_TCE_READ_TAG_ACTV),
|
|
|
|
/* FIR registers */
|
|
DREG(LEM_FIR_ACCUM),
|
|
DREG(LEM_FIR_AND_MASK),
|
|
DREG(LEM_FIR_OR_MASK),
|
|
DREG(LEM_ACTION0),
|
|
DREG(LEM_ACTION1),
|
|
DREG(LEM_ERROR_MASK),
|
|
DREG(LEM_ERROR_AND_MASK),
|
|
DREG(LEM_ERROR_OR_MASK),
|
|
|
|
/* Error traps registers */
|
|
DREG(PHB_ERR_STATUS),
|
|
DREG(PHB_ERR_STATUS),
|
|
DREG(PHB_ERR1_STATUS),
|
|
DREG(PHB_ERR_INJECT),
|
|
DREG(PHB_ERR_LEM_ENABLE),
|
|
DREG(PHB_ERR_IRQ_ENABLE),
|
|
DREG(PHB_ERR_FREEZE_ENABLE),
|
|
DREG(PHB_ERR_SIDE_ENABLE),
|
|
DREG(PHB_ERR_LOG_0),
|
|
DREG(PHB_ERR_LOG_1),
|
|
DREG(PHB_ERR_STATUS_MASK),
|
|
DREG(PHB_ERR1_STATUS_MASK),
|
|
DREG(MMIO_ERR_STATUS),
|
|
DREG(MMIO_ERR1_STATUS),
|
|
DREG(MMIO_ERR_INJECT),
|
|
DREG(MMIO_ERR_LEM_ENABLE),
|
|
DREG(MMIO_ERR_IRQ_ENABLE),
|
|
DREG(MMIO_ERR_FREEZE_ENABLE),
|
|
DREG(MMIO_ERR_SIDE_ENABLE),
|
|
DREG(MMIO_ERR_LOG_0),
|
|
DREG(MMIO_ERR_LOG_1),
|
|
DREG(MMIO_ERR_STATUS_MASK),
|
|
DREG(MMIO_ERR1_STATUS_MASK),
|
|
DREG(DMA_ERR_STATUS),
|
|
DREG(DMA_ERR1_STATUS),
|
|
DREG(DMA_ERR_INJECT),
|
|
DREG(DMA_ERR_LEM_ENABLE),
|
|
DREG(DMA_ERR_IRQ_ENABLE),
|
|
DREG(DMA_ERR_FREEZE_ENABLE),
|
|
DREG(DMA_ERR_SIDE_ENABLE),
|
|
DREG(DMA_ERR_LOG_0),
|
|
DREG(DMA_ERR_LOG_1),
|
|
DREG(DMA_ERR_STATUS_MASK),
|
|
DREG(DMA_ERR1_STATUS_MASK),
|
|
|
|
/* Debug and Trace registers */
|
|
DREG(PHB_DEBUG_CONTROL0),
|
|
DREG(PHB_DEBUG_STATUS0),
|
|
DREG(PHB_DEBUG_CONTROL1),
|
|
DREG(PHB_DEBUG_STATUS1),
|
|
DREG(PHB_DEBUG_CONTROL2),
|
|
DREG(PHB_DEBUG_STATUS2),
|
|
DREG(PHB_DEBUG_CONTROL3),
|
|
DREG(PHB_DEBUG_STATUS3),
|
|
DREG(PHB_DEBUG_CONTROL4),
|
|
DREG(PHB_DEBUG_STATUS4),
|
|
DREG(PHB_DEBUG_CONTROL5),
|
|
DREG(PHB_DEBUG_STATUS5),
|
|
|
|
/* Don't seem to exist ...
|
|
DREG(PHB_DEBUG_CONTROL6),
|
|
DREG(PHB_DEBUG_STATUS6),
|
|
*/
|
|
};
|
|
|
|
static int wsp_pci_regs_show(struct seq_file *m, void *private)
|
|
{
|
|
struct wsp_phb *phb = m->private;
|
|
struct pci_controller *hose = phb->hose;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
|
|
/* Skip write-only regs */
|
|
if (wsp_pci_regs[i].offset == 0xc08 ||
|
|
wsp_pci_regs[i].offset == 0xc10 ||
|
|
wsp_pci_regs[i].offset == 0xc38 ||
|
|
wsp_pci_regs[i].offset == 0xc40)
|
|
continue;
|
|
seq_printf(m, "0x%03x: 0x%016llx %s\n",
|
|
wsp_pci_regs[i].offset,
|
|
in_be64(hose->cfg_data + wsp_pci_regs[i].offset),
|
|
wsp_pci_regs[i].name);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int wsp_pci_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, wsp_pci_regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations wsp_pci_regs_fops = {
|
|
.open = wsp_pci_regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int wsp_pci_reg_set(void *data, u64 val)
|
|
{
|
|
out_be64((void __iomem *)data, val);
|
|
return 0;
|
|
}
|
|
|
|
static int wsp_pci_reg_get(void *data, u64 *val)
|
|
{
|
|
*val = in_be64((void __iomem *)data);
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n");
|
|
|
|
static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id)
|
|
{
|
|
struct wsp_phb *phb = dev_id;
|
|
struct pci_controller *hose = phb->hose;
|
|
irqreturn_t handled = IRQ_NONE;
|
|
struct wsp_pcie_err_log_data ed;
|
|
|
|
pr_err("PCI: Error interrupt on %s (PHB %d)\n",
|
|
hose->dn->full_name, hose->global_number);
|
|
again:
|
|
memset(&ed, 0, sizeof(ed));
|
|
|
|
/* Read and clear UTL errors */
|
|
ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS);
|
|
if (ed.utl_sys_err)
|
|
out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err);
|
|
ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS);
|
|
if (ed.utl_port_err)
|
|
out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err);
|
|
ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS);
|
|
if (ed.utl_rc_err)
|
|
out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err);
|
|
|
|
/* Read and clear main trap errors */
|
|
ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS);
|
|
if (ed.phb_err) {
|
|
ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS);
|
|
ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0);
|
|
ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1);
|
|
out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0);
|
|
out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0);
|
|
}
|
|
ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS);
|
|
if (ed.mmio_err) {
|
|
ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS);
|
|
ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0);
|
|
ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1);
|
|
out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0);
|
|
out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0);
|
|
}
|
|
ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS);
|
|
if (ed.dma_err) {
|
|
ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS);
|
|
ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0);
|
|
ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1);
|
|
out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0);
|
|
out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0);
|
|
}
|
|
|
|
/* Now print things out */
|
|
if (ed.phb_err) {
|
|
pr_err(" PHB Error Status : 0x%016llx\n", ed.phb_err);
|
|
pr_err(" PHB First Error Status: 0x%016llx\n", ed.phb_err1);
|
|
pr_err(" PHB Error Log 0 : 0x%016llx\n", ed.phb_log0);
|
|
pr_err(" PHB Error Log 1 : 0x%016llx\n", ed.phb_log1);
|
|
}
|
|
if (ed.mmio_err) {
|
|
pr_err(" MMIO Error Status : 0x%016llx\n", ed.mmio_err);
|
|
pr_err(" MMIO First Error Status: 0x%016llx\n", ed.mmio_err1);
|
|
pr_err(" MMIO Error Log 0 : 0x%016llx\n", ed.mmio_log0);
|
|
pr_err(" MMIO Error Log 1 : 0x%016llx\n", ed.mmio_log1);
|
|
}
|
|
if (ed.dma_err) {
|
|
pr_err(" DMA Error Status : 0x%016llx\n", ed.dma_err);
|
|
pr_err(" DMA First Error Status: 0x%016llx\n", ed.dma_err1);
|
|
pr_err(" DMA Error Log 0 : 0x%016llx\n", ed.dma_log0);
|
|
pr_err(" DMA Error Log 1 : 0x%016llx\n", ed.dma_log1);
|
|
}
|
|
if (ed.utl_sys_err)
|
|
pr_err(" UTL Sys Error Status : 0x%016llx\n", ed.utl_sys_err);
|
|
if (ed.utl_port_err)
|
|
pr_err(" UTL Port Error Status : 0x%016llx\n", ed.utl_port_err);
|
|
if (ed.utl_rc_err)
|
|
pr_err(" UTL RC Error Status : 0x%016llx\n", ed.utl_rc_err);
|
|
|
|
/* Interrupts are caused by the error traps. If we had any error there
|
|
* we loop again in case the UTL buffered some new stuff between
|
|
* going there and going to the traps
|
|
*/
|
|
if (ed.dma_err || ed.mmio_err || ed.phb_err) {
|
|
handled = IRQ_HANDLED;
|
|
goto again;
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb)
|
|
{
|
|
struct pci_controller *hose = phb->hose;
|
|
int err_irq, i, rc;
|
|
char fname[16];
|
|
|
|
/* Create a debugfs file for that PHB */
|
|
sprintf(fname, "phb%d", phb->hose->global_number);
|
|
phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root);
|
|
|
|
/* Some useful debug output */
|
|
if (phb->ddir) {
|
|
struct dentry *d = debugfs_create_dir("regs", phb->ddir);
|
|
char tmp[64];
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
|
|
sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset,
|
|
wsp_pci_regs[i].name);
|
|
debugfs_create_file(tmp, 0600, d,
|
|
hose->cfg_data + wsp_pci_regs[i].offset,
|
|
&wsp_pci_reg_fops);
|
|
}
|
|
debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops);
|
|
}
|
|
|
|
/* Find the IRQ number for that PHB */
|
|
err_irq = irq_of_parse_and_map(hose->dn, 0);
|
|
if (err_irq == 0)
|
|
/* XXX Error IRQ lacking from device-tree */
|
|
err_irq = wsp_pci_get_err_irq_no_dt(hose->dn);
|
|
if (err_irq == 0) {
|
|
pr_err("PCI: Failed to fetch error interrupt for %s\n",
|
|
hose->dn->full_name);
|
|
return;
|
|
}
|
|
/* Request it */
|
|
rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb);
|
|
if (rc) {
|
|
pr_err("PCI: Failed to request interrupt for %s\n",
|
|
hose->dn->full_name);
|
|
}
|
|
/* Enable interrupts for all errors for now */
|
|
out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
|
|
out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
|
|
out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
|
|
}
|
|
|
|
/*
|
|
* This is called later to hookup with the error interrupt
|
|
*/
|
|
static int __init wsp_setup_pci_late(void)
|
|
{
|
|
struct wsp_phb *phb;
|
|
|
|
list_for_each_entry(phb, &wsp_phbs, all)
|
|
wsp_setup_pci_err_reporting(phb);
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall(wsp_setup_pci_late);
|