mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 04:50:57 +07:00
6fdd34d43b
This removes the use of the sysctl and the minisock variable for the Send Ack
Vector feature, as it now is handled fully dynamically via feature negotiation
(i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per
RFC 4341, 4.).
Using a sysctl in parallel to this implementation would open the door to
crashes, since much of the code relies on tests of the boolean minisock /
sysctl variable. Thus, this patch replaces all tests of type
if (dccp_msk(sk)->dccpms_send_ack_vector)
/* ... */
with
if (dp->dccps_hc_rx_ackvec != NULL)
/* ... */
The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature
negotiation concluded that Ack Vectors are to be used on the half-connection.
Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child),
so that the test is a valid one.
The activation handler for Ack Vectors is called as soon as the feature
negotiation has concluded at the
* server when the Ack marking the transition RESPOND => OPEN arrives;
* client after it has sent its ACK, marking the transition REQUEST => PARTOPEN.
Adding the sequence number of the Response packet to the Ack Vector has been
removed, since
(a) connection establishment implies that the Response has been received;
(b) the CCIDs only look at packets received in the (PART)OPEN state, i.e.
this entry will always be ignored;
(c) it can not be used for anything useful - to detect loss for instance, only
packets received after the loss can serve as pseudo-dupacks.
There was a FIXME to change the error code when dccp_ackvec_add() fails.
I removed this after finding out that:
* the check whether ackno < ISN is already made earlier,
* this Response is likely the 1st packet with an Ackno that the client gets,
* so when dccp_ackvec_add() fails, the reason is likely not a packet error.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
167 lines
7.2 KiB
Plaintext
167 lines
7.2 KiB
Plaintext
DCCP protocol
|
|
============
|
|
|
|
|
|
Contents
|
|
========
|
|
|
|
- Introduction
|
|
- Missing features
|
|
- Socket options
|
|
- Notes
|
|
|
|
Introduction
|
|
============
|
|
|
|
Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
|
|
oriented protocol designed to solve issues present in UDP and TCP, particularly
|
|
for real-time and multimedia (streaming) traffic.
|
|
It divides into a base protocol (RFC 4340) and plugable congestion control
|
|
modules called CCIDs. Like plugable TCP congestion control, at least one CCID
|
|
needs to be enabled in order for the protocol to function properly. In the Linux
|
|
implementation, this is the TCP-like CCID2 (RFC 4341). Additional CCIDs, such as
|
|
the TCP-friendly CCID3 (RFC 4342), are optional.
|
|
For a brief introduction to CCIDs and suggestions for choosing a CCID to match
|
|
given applications, see section 10 of RFC 4340.
|
|
|
|
It has a base protocol and pluggable congestion control IDs (CCIDs).
|
|
|
|
DCCP is a Proposed Standard (RFC 2026), and the homepage for DCCP as a protocol
|
|
is at http://www.ietf.org/html.charters/dccp-charter.html
|
|
|
|
Missing features
|
|
================
|
|
|
|
The Linux DCCP implementation does not currently support all the features that are
|
|
specified in RFCs 4340...42.
|
|
|
|
The known bugs are at:
|
|
http://linux-net.osdl.org/index.php/TODO#DCCP
|
|
|
|
For more up-to-date versions of the DCCP implementation, please consider using
|
|
the experimental DCCP test tree; instructions for checking this out are on:
|
|
http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree
|
|
|
|
|
|
Socket options
|
|
==============
|
|
|
|
DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
|
|
service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
|
|
the socket will fall back to 0 (which means that no meaningful service code
|
|
is present). On active sockets this is set before connect(); specifying more
|
|
than one code has no effect (all subsequent service codes are ignored). The
|
|
case is different for passive sockets, where multiple service codes (up to 32)
|
|
can be set before calling bind().
|
|
|
|
DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
|
|
size (application payload size) in bytes, see RFC 4340, section 14.
|
|
|
|
DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
|
|
supported by the endpoint (see include/linux/dccp.h for symbolic constants).
|
|
The caller needs to provide a sufficiently large (> 2) array of type uint8_t.
|
|
|
|
DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
|
|
time, combining the operation of the next two socket options. This option is
|
|
preferrable over the latter two, since often applications will use the same
|
|
type of CCID for both directions; and mixed use of CCIDs is not currently well
|
|
understood. This socket option takes as argument at least one uint8_t value, or
|
|
an array of uint8_t values, which must match available CCIDS (see above). CCIDs
|
|
must be registered on the socket before calling connect() or listen().
|
|
|
|
DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets
|
|
the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID.
|
|
Please note that the getsockopt argument type here is `int', not uint8_t.
|
|
|
|
DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID.
|
|
|
|
DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold
|
|
timewait state when closing the connection (RFC 4340, 8.3). The usual case is
|
|
that the closing server sends a CloseReq, whereupon the client holds timewait
|
|
state. When this boolean socket option is on, the server sends a Close instead
|
|
and will enter TIMEWAIT. This option must be set after accept() returns.
|
|
|
|
DCCP_SOCKOPT_SEND_CSCOV and DCCP_SOCKOPT_RECV_CSCOV are used for setting the
|
|
partial checksum coverage (RFC 4340, sec. 9.2). The default is that checksums
|
|
always cover the entire packet and that only fully covered application data is
|
|
accepted by the receiver. Hence, when using this feature on the sender, it must
|
|
be enabled at the receiver, too with suitable choice of CsCov.
|
|
|
|
DCCP_SOCKOPT_SEND_CSCOV sets the sender checksum coverage. Values in the
|
|
range 0..15 are acceptable. The default setting is 0 (full coverage),
|
|
values between 1..15 indicate partial coverage.
|
|
DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it
|
|
sets a threshold, where again values 0..15 are acceptable. The default
|
|
of 0 means that all packets with a partial coverage will be discarded.
|
|
Values in the range 1..15 indicate that packets with minimally such a
|
|
coverage value are also acceptable. The higher the number, the more
|
|
restrictive this setting (see [RFC 4340, sec. 9.2.1]). Partial coverage
|
|
settings are inherited to the child socket after accept().
|
|
|
|
The following two options apply to CCID 3 exclusively and are getsockopt()-only.
|
|
In either case, a TFRC info struct (defined in <linux/tfrc.h>) is returned.
|
|
DCCP_SOCKOPT_CCID_RX_INFO
|
|
Returns a `struct tfrc_rx_info' in optval; the buffer for optval and
|
|
optlen must be set to at least sizeof(struct tfrc_rx_info).
|
|
DCCP_SOCKOPT_CCID_TX_INFO
|
|
Returns a `struct tfrc_tx_info' in optval; the buffer for optval and
|
|
optlen must be set to at least sizeof(struct tfrc_tx_info).
|
|
|
|
On unidirectional connections it is useful to close the unused half-connection
|
|
via shutdown (SHUT_WR or SHUT_RD): this will reduce per-packet processing costs.
|
|
|
|
Sysctl variables
|
|
================
|
|
Several DCCP default parameters can be managed by the following sysctls
|
|
(sysctl net.dccp.default or /proc/sys/net/dccp/default):
|
|
|
|
request_retries
|
|
The number of active connection initiation retries (the number of
|
|
Requests minus one) before timing out. In addition, it also governs
|
|
the behaviour of the other, passive side: this variable also sets
|
|
the number of times DCCP repeats sending a Response when the initial
|
|
handshake does not progress from RESPOND to OPEN (i.e. when no Ack
|
|
is received after the initial Request). This value should be greater
|
|
than 0, suggested is less than 10. Analogue of tcp_syn_retries.
|
|
|
|
retries1
|
|
How often a DCCP Response is retransmitted until the listening DCCP
|
|
side considers its connecting peer dead. Analogue of tcp_retries1.
|
|
|
|
retries2
|
|
The number of times a general DCCP packet is retransmitted. This has
|
|
importance for retransmitted acknowledgments and feature negotiation,
|
|
data packets are never retransmitted. Analogue of tcp_retries2.
|
|
|
|
tx_ccid = 2
|
|
Default CCID for the sender-receiver half-connection. Depending on the
|
|
choice of CCID, the Send Ack Vector feature is enabled automatically.
|
|
|
|
rx_ccid = 2
|
|
Default CCID for the receiver-sender half-connection; see tx_ccid.
|
|
|
|
seq_window = 100
|
|
The initial sequence window (sec. 7.5.2).
|
|
|
|
tx_qlen = 5
|
|
The size of the transmit buffer in packets. A value of 0 corresponds
|
|
to an unbounded transmit buffer.
|
|
|
|
sync_ratelimit = 125 ms
|
|
The timeout between subsequent DCCP-Sync packets sent in response to
|
|
sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
|
|
of this parameter is milliseconds; a value of 0 disables rate-limiting.
|
|
|
|
IOCTLS
|
|
======
|
|
FIONREAD
|
|
Works as in udp(7): returns in the `int' argument pointer the size of
|
|
the next pending datagram in bytes, or 0 when no datagram is pending.
|
|
|
|
Notes
|
|
=====
|
|
|
|
DCCP does not travel through NAT successfully at present on many boxes. This is
|
|
because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
|
|
support for DCCP has been added.
|