AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-23 00:47:11 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
6f9414e0f6
linux_dsm_epyc7002/drivers/regulator/rk808-regulator.c
Matti Vaittinen 60ab7f4153
regulator: use linear_ranges helper 
Change the regulator helpers to use common linear_ranges code.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-08 18:18:13 +01:00

1382 lines
43 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Regulator driver for Rockchip RK805/RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
*
* Author: Wadim Egorov <w.egorov@phytec.de>
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/mfd/rk808.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio/consumer.h>
/* Field Definitions */
#define RK808_BUCK_VSEL_MASK 0x3f
#define RK808_BUCK4_VSEL_MASK 0xf
#define RK808_LDO_VSEL_MASK 0x1f
#define RK809_BUCK5_VSEL_MASK 0x7
#define RK817_LDO_VSEL_MASK 0x7f
#define RK817_BOOST_VSEL_MASK 0x7
#define RK817_BUCK_VSEL_MASK 0x7f
#define RK818_BUCK_VSEL_MASK 0x3f
#define RK818_BUCK4_VSEL_MASK 0x1f
#define RK818_LDO_VSEL_MASK 0x1f
#define RK818_LDO3_ON_VSEL_MASK 0xf
#define RK818_BOOST_ON_VSEL_MASK 0xe0
/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET 3
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
#define RK808_DVS2_POL BIT(2)
#define RK808_DVS1_POL BIT(1)
/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
#define RK808_SLP_REG_OFFSET 1
/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
#define RK808_DVS_REG_OFFSET 2
/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
#define RK808_SLP_SET_OFF_REG_OFFSET 2
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
#define ENABLE_MASK(id) (BIT(id) | BIT(4 + (id)))
#define DISABLE_VAL(id) (BIT(4 + (id)))
#define RK817_BOOST_DESC(_id, _match, _supply, _min, _max, _step, _vreg,\
_vmask, _ereg, _emask, _enval, _disval, _etime, m_drop) \
{ \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
.enable_time = (_etime), \
.min_dropout_uV = (m_drop) * 1000, \
.ops = &rk817_boost_ops, \
}
#define RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _enval, _disval, _etime, _ops) \
{ \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
.enable_time = (_etime), \
.ops = _ops, \
}
#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, 0, 0, _etime, &rk805_reg_ops)
#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)
#define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _disval, _etime) \
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _emask, _disval, _etime, &rk817_reg_ops)
#define RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
_enval, _disval, _ops) \
{ \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
.owner = THIS_MODULE, \
.ops = _ops \
}
#define RK817_DESC_SWITCH(_id, _match, _supply, _ereg, _emask, \
_disval) \
RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
_emask, _disval, &rk817_switch_ops)
#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
0, 0, &rk808_switch_ops)
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
static const int rk808_buck_config_regs[] = {
RK808_BUCK1_CONFIG_REG,
RK808_BUCK2_CONFIG_REG,
RK808_BUCK3_CONFIG_REG,
RK808_BUCK4_CONFIG_REG,
};
static const struct linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
#define RK809_BUCK5_SEL_CNT (8)
static const struct linear_range rk809_buck5_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0),
REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000),
REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000),
REGULATOR_LINEAR_RANGE(3300000, 6, 7, 300000),
};
#define RK817_BUCK1_MIN0 500000
#define RK817_BUCK1_MAX0 1500000
#define RK817_BUCK1_MIN1 1600000
#define RK817_BUCK1_MAX1 2400000
#define RK817_BUCK3_MAX1 3400000
#define RK817_BUCK1_STP0 12500
#define RK817_BUCK1_STP1 100000
#define RK817_BUCK1_SEL0 ((RK817_BUCK1_MAX0 - RK817_BUCK1_MIN0) /\
RK817_BUCK1_STP0)
#define RK817_BUCK1_SEL1 ((RK817_BUCK1_MAX1 - RK817_BUCK1_MIN1) /\
RK817_BUCK1_STP1)
#define RK817_BUCK3_SEL1 ((RK817_BUCK3_MAX1 - RK817_BUCK1_MIN1) /\
RK817_BUCK1_STP1)
#define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1)
#define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1)
static const struct linear_range rk817_buck1_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1),
};
static const struct linear_range rk817_buck3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
RK817_BUCK3_SEL_CNT, RK817_BUCK1_STP1),
};
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int val;
int ret;
if (!gpio || gpiod_get_value(gpio) == 0)
return regulator_get_voltage_sel_regmap(rdev);
ret = regmap_read(rdev->regmap,
rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
&val);
if (ret != 0)
return ret;
val &= rdev->desc->vsel_mask;
val >>= ffs(rdev->desc->vsel_mask) - 1;
return val;
}
static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
int ret, delta_sel;
unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
if (ret != 0)
return ret;
tmp = val & ~mask;
old_sel = val & mask;
old_sel >>= ffs(mask) - 1;
delta_sel = sel - old_sel;
/*
* If directly modify the register to change the voltage, we will face
* the risk of overshoot. Put it into a multi-step, can effectively
* avoid this problem, a step is 100mv here.
*/
while (delta_sel > MAX_STEPS_ONE_TIME) {
old_sel += MAX_STEPS_ONE_TIME;
val = old_sel << (ffs(mask) - 1);
val |= tmp;
/*
* i2c is 400kHz (2.5us per bit) and we must transmit _at least_
* 3 bytes (24 bits) plus start and stop so 26 bits. So we've
* got more than 65 us between each voltage change and thus
* won't ramp faster than ~1500 uV / us.
*/
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
delta_sel = sel - old_sel;
}
sel <<= ffs(mask) - 1;
val = tmp | sel;
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
/*
* When we change the voltage register directly, the ramp rate is about
* 100000uv/us, wait 1us to make sure the target voltage to be stable,
* so we needn't wait extra time after that.
*/
udelay(1);
return ret;
}
static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int reg = rdev->desc->vsel_reg;
unsigned old_sel;
int ret, gpio_level;
if (!gpio)
return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
gpio_level = gpiod_get_value(gpio);
if (gpio_level == 0) {
reg += RK808_DVS_REG_OFFSET;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
} else {
ret = regmap_read(rdev->regmap,
reg + RK808_DVS_REG_OFFSET,
&old_sel);
}
if (ret != 0)
return ret;
sel <<= ffs(rdev->desc->vsel_mask) - 1;
sel |= old_sel & ~rdev->desc->vsel_mask;
ret = regmap_write(rdev->regmap, reg, sel);
if (ret)
return ret;
gpiod_set_value(gpio, !gpio_level);
return ret;
}
static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
/* if there is no dvs1/2 pin, we don't need wait extra time here. */
if (!gpio)
return 0;
return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
}
static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];
switch (ramp_delay) {
case 1 ... 2000:
ramp_value = RK808_RAMP_RATE_2MV_PER_US;
break;
case 2001 ... 4000:
ramp_value = RK808_RAMP_RATE_4MV_PER_US;
break;
case 4001 ... 6000:
ramp_value = RK808_RAMP_RATE_6MV_PER_US;
break;
case 6001 ... 10000:
break;
default:
pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(rdev->regmap, reg,
RK808_RAMP_RATE_MASK, ramp_value);
}
/*
* RK817 RK809
*/
static int rk817_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK817_RAMP_RATE_25MV_PER_US;
unsigned int reg = RK817_BUCK_CONFIG_REG(rdev_get_id(rdev));
switch (ramp_delay) {
case 0 ... 3000:
ramp_value = RK817_RAMP_RATE_3MV_PER_US;
break;
case 3001 ... 6300:
ramp_value = RK817_RAMP_RATE_6_3MV_PER_US;
break;
case 6301 ... 12500:
ramp_value = RK817_RAMP_RATE_12_5MV_PER_US;
break;
case 12501 ... 25000:
break;
default:
dev_warn(&rdev->dev,
"%s ramp_delay: %d not supported, setting 25000\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(rdev->regmap, reg,
RK817_RAMP_RATE_MASK, ramp_value);
}
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear(rdev, uv, uv);
if (sel < 0)
return -EINVAL;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->vsel_mask,
sel);
}
static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
return -EINVAL;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->vsel_mask,
sel);
}
static int rk805_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
}
static int rk805_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
0);
}
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
0);
}
static int rk808_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
}
static int rk817_set_suspend_enable_ctrl(struct regulator_dev *rdev,
unsigned int en)
{
unsigned int reg;
int id = rdev_get_id(rdev);
unsigned int id_slp, msk, val;
if (id >= RK817_ID_DCDC1 && id <= RK817_ID_DCDC4)
id_slp = id;
else if (id >= RK817_ID_LDO1 && id <= RK817_ID_LDO8)
id_slp = 8 + (id - RK817_ID_LDO1);
else if (id >= RK817_ID_LDO9 && id <= RK809_ID_SW2)
id_slp = 4 + (id - RK817_ID_LDO9);
else
return -EINVAL;
reg = RK817_POWER_SLP_EN_REG(id_slp / 8);
msk = BIT(id_slp % 8);
if (en)
val = msk;
else
val = 0;
return regmap_update_bits(rdev->regmap, reg, msk, val);
}
static int rk817_set_suspend_enable(struct regulator_dev *rdev)
{
return rk817_set_suspend_enable_ctrl(rdev, 1);
}
static int rk817_set_suspend_disable(struct regulator_dev *rdev)
{
return rk817_set_suspend_enable_ctrl(rdev, 0);
}
static int rk8xx_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode)
{
unsigned int reg;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
switch (mode) {
case REGULATOR_MODE_FAST:
return regmap_update_bits(rdev->regmap, reg,
PWM_MODE_MSK, FPWM_MODE);
case REGULATOR_MODE_NORMAL:
return regmap_update_bits(rdev->regmap, reg,
PWM_MODE_MSK, AUTO_PWM_MODE);
default:
dev_err(&rdev->dev, "do not support this mode\n");
return -EINVAL;
}
return 0;
}
static int rk8xx_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
switch (mode) {
case REGULATOR_MODE_FAST:
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
PWM_MODE_MSK, FPWM_MODE);
case REGULATOR_MODE_NORMAL:
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
PWM_MODE_MSK, AUTO_PWM_MODE);
default:
dev_err(&rdev->dev, "do not support this mode\n");
return -EINVAL;
}
return 0;
}
static unsigned int rk8xx_get_mode(struct regulator_dev *rdev)
{
unsigned int val;
int err;
err = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
if (err)
return err;
if (val & FPWM_MODE)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
}
static int rk8xx_is_enabled_wmsk_regmap(struct regulator_dev *rdev)
{
unsigned int val;
int ret;
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
if (ret != 0)
return ret;
/* add write mask bit */
val |= (rdev->desc->enable_mask & 0xf0);
val &= rdev->desc->enable_mask;
if (rdev->desc->enable_is_inverted) {
if (rdev->desc->enable_val)
return val != rdev->desc->enable_val;
return (val == 0);
}
if (rdev->desc->enable_val)
return val == rdev->desc->enable_val;
return val != 0;
}
static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode)
{
switch (mode) {
case 1:
return REGULATOR_MODE_FAST;
case 2:
return REGULATOR_MODE_NORMAL;
default:
return REGULATOR_MODE_INVALID;
}
}
static const struct regulator_ops rk805_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static const struct regulator_ops rk805_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static const struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_ramp_delay = rk808_set_ramp_delay,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct linear_range rk805_buck_1_2_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
};
static const struct regulator_ops rk809_buck5_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static const struct regulator_ops rk817_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static const struct regulator_ops rk817_boost_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static const struct regulator_ops rk817_buck_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_mode = rk8xx_set_mode,
.get_mode = rk8xx_get_mode,
.set_suspend_mode = rk8xx_set_suspend_mode,
.set_ramp_delay = rk817_set_ramp_delay,
.set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static const struct regulator_ops rk817_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static const struct regulator_desc rk805_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC1,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC2,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC3,
.ops = &rk805_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK805_DCDC_EN_REG, BIT(3), 0),
RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(0), 400),
RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(1), 400),
RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(2), 400),
};
static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
RK808_DCDC_EN_REG, BIT(3), 0),
RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(0), 400),
RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(1), 400),
{
.name = "LDO_REG3",
.supply_name = "vcc7",
.of_match = of_match_ptr("LDO_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
.vsel_reg = RK808_LDO3_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
},
RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(3), 400),
RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(4), 400),
RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(5), 400),
RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(6), 400),
RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(7), 400),
RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
RK808_DCDC_EN_REG, BIT(5)),
RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
RK808_DCDC_EN_REG, BIT(6)),
};
static const struct regulator_desc rk809_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC1,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK1_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC2,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK2_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC3,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK3_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG4",
.supply_name = "vcc4",
.of_match = of_match_ptr("DCDC_REG4"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC4,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
.linear_ranges = rk817_buck3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
.vsel_reg = RK817_BUCK4_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG5",
.supply_name = "vcc9",
.of_match = of_match_ptr("DCDC_REG5"),
.regulators_node = of_match_ptr("regulators"),
.id = RK809_ID_DCDC5,
.ops = &rk809_buck5_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK809_BUCK5_SEL_CNT,
.linear_ranges = rk809_buck5_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
.vsel_reg = RK809_BUCK5_CONFIG(0),
.vsel_mask = RK809_BUCK5_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(3),
.enable_mask = ENABLE_MASK(1),
.enable_val = ENABLE_MASK(1),
.disable_val = DISABLE_VAL(1),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
},
RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC_SWITCH(RK809_ID_SW1, "SWITCH_REG1", "vcc9",
RK817_POWER_EN_REG(3), ENABLE_MASK(2),
DISABLE_VAL(2)),
RK817_DESC_SWITCH(RK809_ID_SW2, "SWITCH_REG2", "vcc8",
RK817_POWER_EN_REG(3), ENABLE_MASK(3),
DISABLE_VAL(3)),
};
static const struct regulator_desc rk817_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC1,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK1_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC2,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK2_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC3,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK3_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG4",
.supply_name = "vcc4",
.of_match = of_match_ptr("DCDC_REG4"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC4,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
.linear_ranges = rk817_buck3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
.vsel_reg = RK817_BUCK4_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
},
RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_BOOST_DESC(RK817_ID_BOOST, "BOOST", "vcc8", 4700, 5400, 100,
RK817_BOOST_OTG_CFG, RK817_BOOST_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400, 3500 - 5400),
RK817_DESC_SWITCH(RK817_ID_BOOST_OTG_SW, "OTG_SWITCH", "vcc9",
RK817_POWER_EN_REG(3), ENABLE_MASK(2),
DISABLE_VAL(2)),
};
static const struct regulator_desc rk818_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(3), 0),
RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(4), 0),
RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(0), 400),
RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(1), 400),
{
.name = "LDO_REG3",
.supply_name = "vcc7",
.of_match = of_match_ptr("LDO_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
.vsel_reg = RK818_LDO3_ON_VSEL_REG,
.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
.enable_reg = RK818_LDO_EN_REG,
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
},
RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(3), 400),
RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(4), 400),
RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(5), 400),
RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(6), 400),
RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(7), 400),
RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(5), 400),
RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
RK818_DCDC_EN_REG, BIT(6)),
RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
RK818_H5V_EN_REG, BIT(0)),
RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
RK818_DCDC_EN_REG, BIT(7)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct device *client_dev,
struct regmap *map,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
GPIOD_OUT_LOW);
if (IS_ERR(pdata->dvs_gpio[i])) {
ret = PTR_ERR(pdata->dvs_gpio[i]);
dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
goto dt_parse_end;
}
if (!pdata->dvs_gpio[i]) {
dev_info(dev, "there is no dvs%d gpio\n", i);
continue;
}
tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
gpiod_is_active_low(pdata->dvs_gpio[i]) ?
0 : tmp);
}
dt_parse_end:
of_node_put(np);
return ret;
}
static int rk808_regulator_probe(struct platform_device *pdev)
{
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
struct i2c_client *client = rk808->i2c;
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
const struct regulator_desc *regulators;
int ret, i, nregulators;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
rk808->regmap, pdata);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, pdata);
switch (rk808->variant) {
case RK805_ID:
regulators = rk805_reg;
nregulators = RK805_NUM_REGULATORS;
break;
case RK808_ID:
regulators = rk808_reg;
nregulators = RK808_NUM_REGULATORS;
break;
case RK809_ID:
regulators = rk809_reg;
nregulators = RK809_NUM_REGULATORS;
break;
case RK817_ID:
regulators = rk817_reg;
nregulators = RK817_NUM_REGULATORS;
break;
case RK818_ID:
regulators = rk818_reg;
nregulators = RK818_NUM_REGULATORS;
break;
default:
dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
rk808->variant);
return -EINVAL;
}
config.dev = &client->dev;
config.driver_data = pdata;
config.regmap = rk808->regmap;
/* Instantiate the regulators */
for (i = 0; i < nregulators; i++) {
rk808_rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rk808_rdev)) {
dev_err(&client->dev,
"failed to register %d regulator\n", i);
return PTR_ERR(rk808_rdev);
}
}
return 0;
}
static struct platform_driver rk808_regulator_driver = {
.probe = rk808_regulator_probe,
.driver = {
.name = "rk808-regulator"
},
};
module_platform_driver(rk808_regulator_driver);
MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs");
MODULE_AUTHOR("Tony xie <tony.xie@rock-chips.com>");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk808-regulator");
Reference in New Issue View Git Blame Copy Permalink