mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 23:16:37 +07:00
c8ebae3703
Based on a patch from Linus Walleij. Add dmaengine based support for DMA to the MMCI driver, using the Primecell DMA engine interface. The changes over Linus' driver are: - rename txsize_threshold to dmasize_threshold, as this reflects the purpose more. - use 'mmci_dma_' as the function prefix rather than 'dma_mmci_'. - clean up requesting of dma channels. - don't release a single channel twice when it's shared between tx and rx. - get rid of 'dma_enable' bool - instead check whether the channel is NULL. - detect incomplete DMA at the end of a transfer. Some DMA controllers (eg, PL08x) are unable to be configured for scatter DMA and also listen to all four DMA request signals [BREQ,SREQ,LBREQ,LSREQ] from the MMCI. They can do one or other but not both. As MMCI uses LBREQ/LSREQ for the final burst/words, PL08x does not transfer the last few words. - map and unmap DMA buffers using the DMA engine struct device, not the MMCI struct device - the DMA engine is doing the DMA transfer, not us. - avoid double-unmapping of the DMA buffers on MMCI data errors. - don't check for negative values from the dmaengine tx submission function - Dan says this must never fail. - use new dmaengine helper functions rather than using the ugly function pointers directly. - allow DMA code to be fully optimized away using dma_inprogress() which is defined to constant 0 if DMA engine support is disabled. - request maximum segment size from the DMA engine struct device and set this appropriately. - removed checking of buffer alignment - the DMA engine should deal with its own restrictions on buffer alignment, not the individual DMA engine users. - removed setting DMAREQCTL - this confuses some DMA controllers as it causes LBREQ to be asserted for the last seven transfers, rather than six SREQ and one LSREQ. - removed burst setting - the DMA controller should not burst past the transfer size required to complete the DMA operation. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
197 lines
5.5 KiB
C
197 lines
5.5 KiB
C
/*
|
|
* linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
|
|
*
|
|
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#define MMCIPOWER 0x000
|
|
#define MCI_PWR_OFF 0x00
|
|
#define MCI_PWR_UP 0x02
|
|
#define MCI_PWR_ON 0x03
|
|
#define MCI_DATA2DIREN (1 << 2)
|
|
#define MCI_CMDDIREN (1 << 3)
|
|
#define MCI_DATA0DIREN (1 << 4)
|
|
#define MCI_DATA31DIREN (1 << 5)
|
|
#define MCI_OD (1 << 6)
|
|
#define MCI_ROD (1 << 7)
|
|
/* The ST Micro version does not have ROD */
|
|
#define MCI_FBCLKEN (1 << 7)
|
|
#define MCI_DATA74DIREN (1 << 8)
|
|
|
|
#define MMCICLOCK 0x004
|
|
#define MCI_CLK_ENABLE (1 << 8)
|
|
#define MCI_CLK_PWRSAVE (1 << 9)
|
|
#define MCI_CLK_BYPASS (1 << 10)
|
|
#define MCI_4BIT_BUS (1 << 11)
|
|
/* 8bit wide buses supported in ST Micro versions */
|
|
#define MCI_ST_8BIT_BUS (1 << 12)
|
|
|
|
#define MMCIARGUMENT 0x008
|
|
#define MMCICOMMAND 0x00c
|
|
#define MCI_CPSM_RESPONSE (1 << 6)
|
|
#define MCI_CPSM_LONGRSP (1 << 7)
|
|
#define MCI_CPSM_INTERRUPT (1 << 8)
|
|
#define MCI_CPSM_PENDING (1 << 9)
|
|
#define MCI_CPSM_ENABLE (1 << 10)
|
|
#define MCI_SDIO_SUSP (1 << 11)
|
|
#define MCI_ENCMD_COMPL (1 << 12)
|
|
#define MCI_NIEN (1 << 13)
|
|
#define MCI_CE_ATACMD (1 << 14)
|
|
|
|
#define MMCIRESPCMD 0x010
|
|
#define MMCIRESPONSE0 0x014
|
|
#define MMCIRESPONSE1 0x018
|
|
#define MMCIRESPONSE2 0x01c
|
|
#define MMCIRESPONSE3 0x020
|
|
#define MMCIDATATIMER 0x024
|
|
#define MMCIDATALENGTH 0x028
|
|
#define MMCIDATACTRL 0x02c
|
|
#define MCI_DPSM_ENABLE (1 << 0)
|
|
#define MCI_DPSM_DIRECTION (1 << 1)
|
|
#define MCI_DPSM_MODE (1 << 2)
|
|
#define MCI_DPSM_DMAENABLE (1 << 3)
|
|
#define MCI_DPSM_BLOCKSIZE (1 << 4)
|
|
/* Control register extensions in the ST Micro U300 and Ux500 versions */
|
|
#define MCI_ST_DPSM_RWSTART (1 << 8)
|
|
#define MCI_ST_DPSM_RWSTOP (1 << 9)
|
|
#define MCI_ST_DPSM_RWMOD (1 << 10)
|
|
#define MCI_ST_DPSM_SDIOEN (1 << 11)
|
|
/* Control register extensions in the ST Micro Ux500 versions */
|
|
#define MCI_ST_DPSM_DMAREQCTL (1 << 12)
|
|
#define MCI_ST_DPSM_DBOOTMODEEN (1 << 13)
|
|
#define MCI_ST_DPSM_BUSYMODE (1 << 14)
|
|
#define MCI_ST_DPSM_DDRMODE (1 << 15)
|
|
|
|
#define MMCIDATACNT 0x030
|
|
#define MMCISTATUS 0x034
|
|
#define MCI_CMDCRCFAIL (1 << 0)
|
|
#define MCI_DATACRCFAIL (1 << 1)
|
|
#define MCI_CMDTIMEOUT (1 << 2)
|
|
#define MCI_DATATIMEOUT (1 << 3)
|
|
#define MCI_TXUNDERRUN (1 << 4)
|
|
#define MCI_RXOVERRUN (1 << 5)
|
|
#define MCI_CMDRESPEND (1 << 6)
|
|
#define MCI_CMDSENT (1 << 7)
|
|
#define MCI_DATAEND (1 << 8)
|
|
#define MCI_DATABLOCKEND (1 << 10)
|
|
#define MCI_CMDACTIVE (1 << 11)
|
|
#define MCI_TXACTIVE (1 << 12)
|
|
#define MCI_RXACTIVE (1 << 13)
|
|
#define MCI_TXFIFOHALFEMPTY (1 << 14)
|
|
#define MCI_RXFIFOHALFFULL (1 << 15)
|
|
#define MCI_TXFIFOFULL (1 << 16)
|
|
#define MCI_RXFIFOFULL (1 << 17)
|
|
#define MCI_TXFIFOEMPTY (1 << 18)
|
|
#define MCI_RXFIFOEMPTY (1 << 19)
|
|
#define MCI_TXDATAAVLBL (1 << 20)
|
|
#define MCI_RXDATAAVLBL (1 << 21)
|
|
#define MCI_SDIOIT (1 << 22)
|
|
#define MCI_CEATAEND (1 << 23)
|
|
|
|
#define MMCICLEAR 0x038
|
|
#define MCI_CMDCRCFAILCLR (1 << 0)
|
|
#define MCI_DATACRCFAILCLR (1 << 1)
|
|
#define MCI_CMDTIMEOUTCLR (1 << 2)
|
|
#define MCI_DATATIMEOUTCLR (1 << 3)
|
|
#define MCI_TXUNDERRUNCLR (1 << 4)
|
|
#define MCI_RXOVERRUNCLR (1 << 5)
|
|
#define MCI_CMDRESPENDCLR (1 << 6)
|
|
#define MCI_CMDSENTCLR (1 << 7)
|
|
#define MCI_DATAENDCLR (1 << 8)
|
|
#define MCI_DATABLOCKENDCLR (1 << 10)
|
|
#define MCI_SDIOITC (1 << 22)
|
|
#define MCI_CEATAENDC (1 << 23)
|
|
|
|
#define MMCIMASK0 0x03c
|
|
#define MCI_CMDCRCFAILMASK (1 << 0)
|
|
#define MCI_DATACRCFAILMASK (1 << 1)
|
|
#define MCI_CMDTIMEOUTMASK (1 << 2)
|
|
#define MCI_DATATIMEOUTMASK (1 << 3)
|
|
#define MCI_TXUNDERRUNMASK (1 << 4)
|
|
#define MCI_RXOVERRUNMASK (1 << 5)
|
|
#define MCI_CMDRESPENDMASK (1 << 6)
|
|
#define MCI_CMDSENTMASK (1 << 7)
|
|
#define MCI_DATAENDMASK (1 << 8)
|
|
#define MCI_DATABLOCKENDMASK (1 << 10)
|
|
#define MCI_CMDACTIVEMASK (1 << 11)
|
|
#define MCI_TXACTIVEMASK (1 << 12)
|
|
#define MCI_RXACTIVEMASK (1 << 13)
|
|
#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
|
|
#define MCI_RXFIFOHALFFULLMASK (1 << 15)
|
|
#define MCI_TXFIFOFULLMASK (1 << 16)
|
|
#define MCI_RXFIFOFULLMASK (1 << 17)
|
|
#define MCI_TXFIFOEMPTYMASK (1 << 18)
|
|
#define MCI_RXFIFOEMPTYMASK (1 << 19)
|
|
#define MCI_TXDATAAVLBLMASK (1 << 20)
|
|
#define MCI_RXDATAAVLBLMASK (1 << 21)
|
|
#define MCI_SDIOITMASK (1 << 22)
|
|
#define MCI_CEATAENDMASK (1 << 23)
|
|
|
|
#define MMCIMASK1 0x040
|
|
#define MMCIFIFOCNT 0x048
|
|
#define MMCIFIFO 0x080 /* to 0x0bc */
|
|
|
|
#define MCI_IRQENABLE \
|
|
(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
|
|
MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
|
|
MCI_CMDRESPENDMASK|MCI_CMDSENTMASK)
|
|
|
|
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
|
|
#define MCI_IRQ1MASK \
|
|
(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
|
|
MCI_TXFIFOHALFEMPTYMASK)
|
|
|
|
#define NR_SG 16
|
|
|
|
struct clk;
|
|
struct variant_data;
|
|
struct dma_chan;
|
|
|
|
struct mmci_host {
|
|
phys_addr_t phybase;
|
|
void __iomem *base;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
struct mmc_host *mmc;
|
|
struct clk *clk;
|
|
int gpio_cd;
|
|
int gpio_wp;
|
|
int gpio_cd_irq;
|
|
bool singleirq;
|
|
|
|
spinlock_t lock;
|
|
|
|
unsigned int mclk;
|
|
unsigned int cclk;
|
|
u32 pwr;
|
|
struct mmci_platform_data *plat;
|
|
struct variant_data *variant;
|
|
|
|
u8 hw_designer;
|
|
u8 hw_revision:4;
|
|
|
|
struct timer_list timer;
|
|
unsigned int oldstat;
|
|
|
|
/* pio stuff */
|
|
struct sg_mapping_iter sg_miter;
|
|
unsigned int size;
|
|
struct regulator *vcc;
|
|
|
|
#ifdef CONFIG_DMA_ENGINE
|
|
/* DMA stuff */
|
|
struct dma_chan *dma_current;
|
|
struct dma_chan *dma_rx_channel;
|
|
struct dma_chan *dma_tx_channel;
|
|
|
|
#define dma_inprogress(host) ((host)->dma_current)
|
|
#else
|
|
#define dma_inprogress(host) (0)
|
|
#endif
|
|
};
|
|
|