linux_dsm_epyc7002/drivers/net/wan/hd64572.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

641 lines
18 KiB
C

/*
* Hitachi (now Renesas) SCA-II HD64572 driver for Linux
*
* Copyright (C) 1998-2008 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* Source of information: HD64572 SCA-II User's Manual
*
* We use the following SCA memory map:
*
* Packet buffer descriptor rings - starting from card->rambase:
* rx_ring_buffers * sizeof(pkt_desc) = logical channel #0 RX ring
* tx_ring_buffers * sizeof(pkt_desc) = logical channel #0 TX ring
* rx_ring_buffers * sizeof(pkt_desc) = logical channel #1 RX ring (if used)
* tx_ring_buffers * sizeof(pkt_desc) = logical channel #1 TX ring (if used)
*
* Packet data buffers - starting from card->rambase + buff_offset:
* rx_ring_buffers * HDLC_MAX_MRU = logical channel #0 RX buffers
* tx_ring_buffers * HDLC_MAX_MRU = logical channel #0 TX buffers
* rx_ring_buffers * HDLC_MAX_MRU = logical channel #0 RX buffers (if used)
* tx_ring_buffers * HDLC_MAX_MRU = logical channel #0 TX buffers (if used)
*/
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/fcntl.h>
#include <linux/hdlc.h>
#include <linux/in.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/string.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include "hd64572.h"
#define NAPI_WEIGHT 16
#define get_msci(port) (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET)
#define get_dmac_rx(port) (port->chan ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)
#define get_dmac_tx(port) (port->chan ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)
#define sca_in(reg, card) readb(card->scabase + (reg))
#define sca_out(value, reg, card) writeb(value, card->scabase + (reg))
#define sca_inw(reg, card) readw(card->scabase + (reg))
#define sca_outw(value, reg, card) writew(value, card->scabase + (reg))
#define sca_inl(reg, card) readl(card->scabase + (reg))
#define sca_outl(value, reg, card) writel(value, card->scabase + (reg))
static int sca_poll(struct napi_struct *napi, int budget);
static inline port_t* dev_to_port(struct net_device *dev)
{
return dev_to_hdlc(dev)->priv;
}
static inline void enable_intr(port_t *port)
{
/* enable DMIB and MSCI RXINTA interrupts */
sca_outl(sca_inl(IER0, port->card) |
(port->chan ? 0x08002200 : 0x00080022), IER0, port->card);
}
static inline void disable_intr(port_t *port)
{
sca_outl(sca_inl(IER0, port->card) &
(port->chan ? 0x00FF00FF : 0xFF00FF00), IER0, port->card);
}
static inline u16 desc_abs_number(port_t *port, u16 desc, int transmit)
{
u16 rx_buffs = port->card->rx_ring_buffers;
u16 tx_buffs = port->card->tx_ring_buffers;
desc %= (transmit ? tx_buffs : rx_buffs); // called with "X + 1" etc.
return port->chan * (rx_buffs + tx_buffs) + transmit * rx_buffs + desc;
}
static inline u16 desc_offset(port_t *port, u16 desc, int transmit)
{
/* Descriptor offset always fits in 16 bits */
return desc_abs_number(port, desc, transmit) * sizeof(pkt_desc);
}
static inline pkt_desc __iomem *desc_address(port_t *port, u16 desc,
int transmit)
{
return (pkt_desc __iomem *)(port->card->rambase +
desc_offset(port, desc, transmit));
}
static inline u32 buffer_offset(port_t *port, u16 desc, int transmit)
{
return port->card->buff_offset +
desc_abs_number(port, desc, transmit) * (u32)HDLC_MAX_MRU;
}
static inline void sca_set_carrier(port_t *port)
{
if (!(sca_in(get_msci(port) + ST3, port->card) & ST3_DCD)) {
#ifdef DEBUG_LINK
printk(KERN_DEBUG "%s: sca_set_carrier on\n",
port->netdev.name);
#endif
netif_carrier_on(port->netdev);
} else {
#ifdef DEBUG_LINK
printk(KERN_DEBUG "%s: sca_set_carrier off\n",
port->netdev.name);
#endif
netif_carrier_off(port->netdev);
}
}
static void sca_init_port(port_t *port)
{
card_t *card = port->card;
u16 dmac_rx = get_dmac_rx(port), dmac_tx = get_dmac_tx(port);
int transmit, i;
port->rxin = 0;
port->txin = 0;
port->txlast = 0;
for (transmit = 0; transmit < 2; transmit++) {
u16 buffs = transmit ? card->tx_ring_buffers
: card->rx_ring_buffers;
for (i = 0; i < buffs; i++) {
pkt_desc __iomem *desc = desc_address(port, i, transmit);
u16 chain_off = desc_offset(port, i + 1, transmit);
u32 buff_off = buffer_offset(port, i, transmit);
writel(chain_off, &desc->cp);
writel(buff_off, &desc->bp);
writew(0, &desc->len);
writeb(0, &desc->stat);
}
}
/* DMA disable - to halt state */
sca_out(0, DSR_RX(port->chan), card);
sca_out(0, DSR_TX(port->chan), card);
/* software ABORT - to initial state */
sca_out(DCR_ABORT, DCR_RX(port->chan), card);
sca_out(DCR_ABORT, DCR_TX(port->chan), card);
/* current desc addr */
sca_outl(desc_offset(port, 0, 0), dmac_rx + CDAL, card);
sca_outl(desc_offset(port, card->tx_ring_buffers - 1, 0),
dmac_rx + EDAL, card);
sca_outl(desc_offset(port, 0, 1), dmac_tx + CDAL, card);
sca_outl(desc_offset(port, 0, 1), dmac_tx + EDAL, card);
/* clear frame end interrupt counter */
sca_out(DCR_CLEAR_EOF, DCR_RX(port->chan), card);
sca_out(DCR_CLEAR_EOF, DCR_TX(port->chan), card);
/* Receive */
sca_outw(HDLC_MAX_MRU, dmac_rx + BFLL, card); /* set buffer length */
sca_out(0x14, DMR_RX(port->chan), card); /* Chain mode, Multi-frame */
sca_out(DIR_EOME, DIR_RX(port->chan), card); /* enable interrupts */
sca_out(DSR_DE, DSR_RX(port->chan), card); /* DMA enable */
/* Transmit */
sca_out(0x14, DMR_TX(port->chan), card); /* Chain mode, Multi-frame */
sca_out(DIR_EOME, DIR_TX(port->chan), card); /* enable interrupts */
sca_set_carrier(port);
netif_napi_add(port->netdev, &port->napi, sca_poll, NAPI_WEIGHT);
}
/* MSCI interrupt service */
static inline void sca_msci_intr(port_t *port)
{
u16 msci = get_msci(port);
card_t* card = port->card;
if (sca_in(msci + ST1, card) & ST1_CDCD) {
/* Reset MSCI CDCD status bit */
sca_out(ST1_CDCD, msci + ST1, card);
sca_set_carrier(port);
}
}
static inline void sca_rx(card_t *card, port_t *port, pkt_desc __iomem *desc,
u16 rxin)
{
struct net_device *dev = port->netdev;
struct sk_buff *skb;
u16 len;
u32 buff;
len = readw(&desc->len);
skb = dev_alloc_skb(len);
if (!skb) {
dev->stats.rx_dropped++;
return;
}
buff = buffer_offset(port, rxin, 0);
memcpy_fromio(skb->data, card->rambase + buff, len);
skb_put(skb, len);
#ifdef DEBUG_PKT
printk(KERN_DEBUG "%s RX(%i):", dev->name, skb->len);
debug_frame(skb);
#endif
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
skb->protocol = hdlc_type_trans(skb, dev);
netif_receive_skb(skb);
}
/* Receive DMA service */
static inline int sca_rx_done(port_t *port, int budget)
{
struct net_device *dev = port->netdev;
u16 dmac = get_dmac_rx(port);
card_t *card = port->card;
u8 stat = sca_in(DSR_RX(port->chan), card); /* read DMA Status */
int received = 0;
/* Reset DSR status bits */
sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
DSR_RX(port->chan), card);
if (stat & DSR_BOF)
/* Dropped one or more frames */
dev->stats.rx_over_errors++;
while (received < budget) {
u32 desc_off = desc_offset(port, port->rxin, 0);
pkt_desc __iomem *desc;
u32 cda = sca_inl(dmac + CDAL, card);
if ((cda >= desc_off) && (cda < desc_off + sizeof(pkt_desc)))
break; /* No frame received */
desc = desc_address(port, port->rxin, 0);
stat = readb(&desc->stat);
if (!(stat & ST_RX_EOM))
port->rxpart = 1; /* partial frame received */
else if ((stat & ST_ERROR_MASK) || port->rxpart) {
dev->stats.rx_errors++;
if (stat & ST_RX_OVERRUN)
dev->stats.rx_fifo_errors++;
else if ((stat & (ST_RX_SHORT | ST_RX_ABORT |
ST_RX_RESBIT)) || port->rxpart)
dev->stats.rx_frame_errors++;
else if (stat & ST_RX_CRC)
dev->stats.rx_crc_errors++;
if (stat & ST_RX_EOM)
port->rxpart = 0; /* received last fragment */
} else {
sca_rx(card, port, desc, port->rxin);
received++;
}
/* Set new error descriptor address */
sca_outl(desc_off, dmac + EDAL, card);
port->rxin = (port->rxin + 1) % card->rx_ring_buffers;
}
/* make sure RX DMA is enabled */
sca_out(DSR_DE, DSR_RX(port->chan), card);
return received;
}
/* Transmit DMA service */
static inline void sca_tx_done(port_t *port)
{
struct net_device *dev = port->netdev;
card_t* card = port->card;
u8 stat;
spin_lock(&port->lock);
stat = sca_in(DSR_TX(port->chan), card); /* read DMA Status */
/* Reset DSR status bits */
sca_out((stat & (DSR_EOT | DSR_EOM | DSR_BOF | DSR_COF)) | DSR_DWE,
DSR_TX(port->chan), card);
while (1) {
pkt_desc __iomem *desc = desc_address(port, port->txlast, 1);
u8 stat = readb(&desc->stat);
if (!(stat & ST_TX_OWNRSHP))
break; /* not yet transmitted */
if (stat & ST_TX_UNDRRUN) {
dev->stats.tx_errors++;
dev->stats.tx_fifo_errors++;
} else {
dev->stats.tx_packets++;
dev->stats.tx_bytes += readw(&desc->len);
}
writeb(0, &desc->stat); /* Free descriptor */
port->txlast = (port->txlast + 1) % card->tx_ring_buffers;
}
netif_wake_queue(dev);
spin_unlock(&port->lock);
}
static int sca_poll(struct napi_struct *napi, int budget)
{
port_t *port = container_of(napi, port_t, napi);
u32 isr0 = sca_inl(ISR0, port->card);
int received = 0;
if (isr0 & (port->chan ? 0x08000000 : 0x00080000))
sca_msci_intr(port);
if (isr0 & (port->chan ? 0x00002000 : 0x00000020))
sca_tx_done(port);
if (isr0 & (port->chan ? 0x00000200 : 0x00000002))
received = sca_rx_done(port, budget);
if (received < budget) {
napi_complete(napi);
enable_intr(port);
}
return received;
}
static irqreturn_t sca_intr(int irq, void *dev_id)
{
card_t *card = dev_id;
u32 isr0 = sca_inl(ISR0, card);
int i, handled = 0;
for (i = 0; i < 2; i++) {
port_t *port = get_port(card, i);
if (port && (isr0 & (i ? 0x08002200 : 0x00080022))) {
handled = 1;
disable_intr(port);
napi_schedule(&port->napi);
}
}
return IRQ_RETVAL(handled);
}
static void sca_set_port(port_t *port)
{
card_t* card = port->card;
u16 msci = get_msci(port);
u8 md2 = sca_in(msci + MD2, card);
unsigned int tmc, br = 10, brv = 1024;
if (port->settings.clock_rate > 0) {
/* Try lower br for better accuracy*/
do {
br--;
brv >>= 1; /* brv = 2^9 = 512 max in specs */
/* Baud Rate = CLOCK_BASE / TMC / 2^BR */
tmc = CLOCK_BASE / brv / port->settings.clock_rate;
}while (br > 1 && tmc <= 128);
if (tmc < 1) {
tmc = 1;
br = 0; /* For baud=CLOCK_BASE we use tmc=1 br=0 */
brv = 1;
} else if (tmc > 255)
tmc = 256; /* tmc=0 means 256 - low baud rates */
port->settings.clock_rate = CLOCK_BASE / brv / tmc;
} else {
br = 9; /* Minimum clock rate */
tmc = 256; /* 8bit = 0 */
port->settings.clock_rate = CLOCK_BASE / (256 * 512);
}
port->rxs = (port->rxs & ~CLK_BRG_MASK) | br;
port->txs = (port->txs & ~CLK_BRG_MASK) | br;
port->tmc = tmc;
/* baud divisor - time constant*/
sca_out(port->tmc, msci + TMCR, card);
sca_out(port->tmc, msci + TMCT, card);
/* Set BRG bits */
sca_out(port->rxs, msci + RXS, card);
sca_out(port->txs, msci + TXS, card);
if (port->settings.loopback)
md2 |= MD2_LOOPBACK;
else
md2 &= ~MD2_LOOPBACK;
sca_out(md2, msci + MD2, card);
}
static void sca_open(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
card_t* card = port->card;
u16 msci = get_msci(port);
u8 md0, md2;
switch(port->encoding) {
case ENCODING_NRZ: md2 = MD2_NRZ; break;
case ENCODING_NRZI: md2 = MD2_NRZI; break;
case ENCODING_FM_MARK: md2 = MD2_FM_MARK; break;
case ENCODING_FM_SPACE: md2 = MD2_FM_SPACE; break;
default: md2 = MD2_MANCHESTER;
}
if (port->settings.loopback)
md2 |= MD2_LOOPBACK;
switch(port->parity) {
case PARITY_CRC16_PR0: md0 = MD0_HDLC | MD0_CRC_16_0; break;
case PARITY_CRC16_PR1: md0 = MD0_HDLC | MD0_CRC_16; break;
case PARITY_CRC32_PR1_CCITT: md0 = MD0_HDLC | MD0_CRC_ITU32; break;
case PARITY_CRC16_PR1_CCITT: md0 = MD0_HDLC | MD0_CRC_ITU; break;
default: md0 = MD0_HDLC | MD0_CRC_NONE;
}
sca_out(CMD_RESET, msci + CMD, card);
sca_out(md0, msci + MD0, card);
sca_out(0x00, msci + MD1, card); /* no address field check */
sca_out(md2, msci + MD2, card);
sca_out(0x7E, msci + IDL, card); /* flag character 0x7E */
/* Skip the rest of underrun frame */
sca_out(CTL_IDLE | CTL_URCT | CTL_URSKP, msci + CTL, card);
sca_out(0x0F, msci + RNR, card); /* +1=RX DMA activation condition */
sca_out(0x3C, msci + TFS, card); /* +1 = TX start */
sca_out(0x38, msci + TCR, card); /* =Critical TX DMA activ condition */
sca_out(0x38, msci + TNR0, card); /* =TX DMA activation condition */
sca_out(0x3F, msci + TNR1, card); /* +1=TX DMA deactivation condition*/
/* We're using the following interrupts:
- RXINTA (DCD changes only)
- DMIB (EOM - single frame transfer complete)
*/
sca_outl(IE0_RXINTA | IE0_CDCD, msci + IE0, card);
sca_out(port->tmc, msci + TMCR, card);
sca_out(port->tmc, msci + TMCT, card);
sca_out(port->rxs, msci + RXS, card);
sca_out(port->txs, msci + TXS, card);
sca_out(CMD_TX_ENABLE, msci + CMD, card);
sca_out(CMD_RX_ENABLE, msci + CMD, card);
sca_set_carrier(port);
enable_intr(port);
napi_enable(&port->napi);
netif_start_queue(dev);
}
static void sca_close(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
/* reset channel */
sca_out(CMD_RESET, get_msci(port) + CMD, port->card);
disable_intr(port);
napi_disable(&port->napi);
netif_stop_queue(dev);
}
static int sca_attach(struct net_device *dev, unsigned short encoding,
unsigned short parity)
{
if (encoding != ENCODING_NRZ &&
encoding != ENCODING_NRZI &&
encoding != ENCODING_FM_MARK &&
encoding != ENCODING_FM_SPACE &&
encoding != ENCODING_MANCHESTER)
return -EINVAL;
if (parity != PARITY_NONE &&
parity != PARITY_CRC16_PR0 &&
parity != PARITY_CRC16_PR1 &&
parity != PARITY_CRC32_PR1_CCITT &&
parity != PARITY_CRC16_PR1_CCITT)
return -EINVAL;
dev_to_port(dev)->encoding = encoding;
dev_to_port(dev)->parity = parity;
return 0;
}
#ifdef DEBUG_RINGS
static void sca_dump_rings(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
card_t *card = port->card;
u16 cnt;
printk(KERN_DEBUG "RX ring: CDA=%u EDA=%u DSR=%02X in=%u %sactive",
sca_inl(get_dmac_rx(port) + CDAL, card),
sca_inl(get_dmac_rx(port) + EDAL, card),
sca_in(DSR_RX(port->chan), card), port->rxin,
sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
printk(KERN_CONT "\n");
printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_inl(get_dmac_tx(port) + CDAL, card),
sca_inl(get_dmac_tx(port) + EDAL, card),
sca_in(DSR_TX(port->chan), card), port->txin, port->txlast,
sca_in(DSR_TX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->tx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 1)->stat)));
printk("\n");
printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x,"
" ST: %02x %02x %02x %02x %02x, FST: %02x CST: %02x %02x\n",
sca_in(get_msci(port) + MD0, card),
sca_in(get_msci(port) + MD1, card),
sca_in(get_msci(port) + MD2, card),
sca_in(get_msci(port) + ST0, card),
sca_in(get_msci(port) + ST1, card),
sca_in(get_msci(port) + ST2, card),
sca_in(get_msci(port) + ST3, card),
sca_in(get_msci(port) + ST4, card),
sca_in(get_msci(port) + FST, card),
sca_in(get_msci(port) + CST0, card),
sca_in(get_msci(port) + CST1, card));
printk(KERN_DEBUG "ILAR: %02x ISR: %08x %08x\n", sca_in(ILAR, card),
sca_inl(ISR0, card), sca_inl(ISR1, card));
}
#endif /* DEBUG_RINGS */
static netdev_tx_t sca_xmit(struct sk_buff *skb, struct net_device *dev)
{
port_t *port = dev_to_port(dev);
card_t *card = port->card;
pkt_desc __iomem *desc;
u32 buff, len;
spin_lock_irq(&port->lock);
desc = desc_address(port, port->txin + 1, 1);
BUG_ON(readb(&desc->stat)); /* previous xmit should stop queue */
#ifdef DEBUG_PKT
printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
debug_frame(skb);
#endif
desc = desc_address(port, port->txin, 1);
buff = buffer_offset(port, port->txin, 1);
len = skb->len;
memcpy_toio(card->rambase + buff, skb->data, len);
writew(len, &desc->len);
writeb(ST_TX_EOM, &desc->stat);
dev->trans_start = jiffies;
port->txin = (port->txin + 1) % card->tx_ring_buffers;
sca_outl(desc_offset(port, port->txin, 1),
get_dmac_tx(port) + EDAL, card);
sca_out(DSR_DE, DSR_TX(port->chan), card); /* Enable TX DMA */
desc = desc_address(port, port->txin + 1, 1);
if (readb(&desc->stat)) /* allow 1 packet gap */
netif_stop_queue(dev);
spin_unlock_irq(&port->lock);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
static u32 __devinit sca_detect_ram(card_t *card, u8 __iomem *rambase,
u32 ramsize)
{
/* Round RAM size to 32 bits, fill from end to start */
u32 i = ramsize &= ~3;
do {
i -= 4;
writel(i ^ 0x12345678, rambase + i);
} while (i > 0);
for (i = 0; i < ramsize ; i += 4) {
if (readl(rambase + i) != (i ^ 0x12345678))
break;
}
return i;
}
static void __devinit sca_init(card_t *card, int wait_states)
{
sca_out(wait_states, WCRL, card); /* Wait Control */
sca_out(wait_states, WCRM, card);
sca_out(wait_states, WCRH, card);
sca_out(0, DMER, card); /* DMA Master disable */
sca_out(0x03, PCR, card); /* DMA priority */
sca_out(0, DSR_RX(0), card); /* DMA disable - to halt state */
sca_out(0, DSR_TX(0), card);
sca_out(0, DSR_RX(1), card);
sca_out(0, DSR_TX(1), card);
sca_out(DMER_DME, DMER, card); /* DMA Master enable */
}