mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
dae5220450
This reverts commit 8ed4636877.
This commit breaks boot on Armada 8K based systems. Reverting it makes
affected systems boot again.
Reported-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
333 lines
7.5 KiB
Plaintext
333 lines
7.5 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2016 Marvell Technology Group Ltd.
|
|
*
|
|
* Device Tree file for Marvell Armada AP806.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "Marvell Armada AP806";
|
|
compatible = "marvell,armada-ap806";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
gpio0 = &ap_gpio;
|
|
spi0 = &spi0;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
ap806 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
config-space@f0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0x0 0xf0000000 0x1000000>;
|
|
|
|
gic: interrupt-controller@210000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
reg = <0x210000 0x10000>,
|
|
<0x220000 0x20000>,
|
|
<0x240000 0x20000>,
|
|
<0x260000 0x20000>;
|
|
|
|
gic_v2m0: v2m@280000 {
|
|
compatible = "arm,gic-v2m-frame";
|
|
msi-controller;
|
|
reg = <0x280000 0x1000>;
|
|
arm,msi-base-spi = <160>;
|
|
arm,msi-num-spis = <32>;
|
|
};
|
|
gic_v2m1: v2m@290000 {
|
|
compatible = "arm,gic-v2m-frame";
|
|
msi-controller;
|
|
reg = <0x290000 0x1000>;
|
|
arm,msi-base-spi = <192>;
|
|
arm,msi-num-spis = <32>;
|
|
};
|
|
gic_v2m2: v2m@2a0000 {
|
|
compatible = "arm,gic-v2m-frame";
|
|
msi-controller;
|
|
reg = <0x2a0000 0x1000>;
|
|
arm,msi-base-spi = <224>;
|
|
arm,msi-num-spis = <32>;
|
|
};
|
|
gic_v2m3: v2m@2b0000 {
|
|
compatible = "arm,gic-v2m-frame";
|
|
msi-controller;
|
|
reg = <0x2b0000 0x1000>;
|
|
arm,msi-base-spi = <256>;
|
|
arm,msi-num-spis = <32>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a72-pmu";
|
|
interrupt-parent = <&pic>;
|
|
interrupts = <17>;
|
|
};
|
|
|
|
odmi: odmi@300000 {
|
|
compatible = "marvell,odmi-controller";
|
|
interrupt-controller;
|
|
msi-controller;
|
|
marvell,odmi-frames = <4>;
|
|
reg = <0x300000 0x4000>,
|
|
<0x304000 0x4000>,
|
|
<0x308000 0x4000>,
|
|
<0x30C000 0x4000>;
|
|
marvell,spi-base = <128>, <136>, <144>, <152>;
|
|
};
|
|
|
|
gicp: gicp@3f0040 {
|
|
compatible = "marvell,ap806-gicp";
|
|
reg = <0x3f0040 0x10>;
|
|
marvell,spi-ranges = <64 64>, <288 64>;
|
|
msi-controller;
|
|
};
|
|
|
|
pic: interrupt-controller@3f0100 {
|
|
compatible = "marvell,armada-8k-pic";
|
|
reg = <0x3f0100 0x10>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sei: interrupt-controller@3f0200 {
|
|
compatible = "marvell,ap806-sei";
|
|
reg = <0x3f0200 0x40>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
msi-controller;
|
|
};
|
|
|
|
xor@400000 {
|
|
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
reg = <0x400000 0x1000>,
|
|
<0x410000 0x1000>;
|
|
msi-parent = <&gic_v2m0>;
|
|
clocks = <&ap_clk 3>;
|
|
dma-coherent;
|
|
};
|
|
|
|
xor@420000 {
|
|
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
reg = <0x420000 0x1000>,
|
|
<0x430000 0x1000>;
|
|
msi-parent = <&gic_v2m0>;
|
|
clocks = <&ap_clk 3>;
|
|
dma-coherent;
|
|
};
|
|
|
|
xor@440000 {
|
|
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
reg = <0x440000 0x1000>,
|
|
<0x450000 0x1000>;
|
|
msi-parent = <&gic_v2m0>;
|
|
clocks = <&ap_clk 3>;
|
|
dma-coherent;
|
|
};
|
|
|
|
xor@460000 {
|
|
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
reg = <0x460000 0x1000>,
|
|
<0x470000 0x1000>;
|
|
msi-parent = <&gic_v2m0>;
|
|
clocks = <&ap_clk 3>;
|
|
dma-coherent;
|
|
};
|
|
|
|
spi0: spi@510600 {
|
|
compatible = "marvell,armada-380-spi";
|
|
reg = <0x510600 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ap_clk 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@511000 {
|
|
compatible = "marvell,mv78230-i2c";
|
|
reg = <0x511000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&ap_clk 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@512000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x512000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&ap_clk 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@512100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x512100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&ap_clk 3>;
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
watchdog: watchdog@610000 {
|
|
compatible = "arm,sbsa-gwdt";
|
|
reg = <0x610000 0x1000>, <0x600000 0x1000>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ap_sdhci0: sdhci@6e0000 {
|
|
compatible = "marvell,armada-ap806-sdhci";
|
|
reg = <0x6e0000 0x300>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "core";
|
|
clocks = <&ap_clk 4>;
|
|
dma-coherent;
|
|
marvell,xenon-phy-slow-mode;
|
|
status = "disabled";
|
|
};
|
|
|
|
ap_syscon: system-controller@6f4000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x6f4000 0x2000>;
|
|
|
|
ap_clk: clock {
|
|
compatible = "marvell,ap806-clock";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
ap_pinctrl: pinctrl {
|
|
compatible = "marvell,ap806-pinctrl";
|
|
|
|
uart0_pins: uart0-pins {
|
|
marvell,pins = "mpp11", "mpp19";
|
|
marvell,function = "uart0";
|
|
};
|
|
};
|
|
|
|
ap_gpio: gpio@1040 {
|
|
compatible = "marvell,armada-8k-gpio";
|
|
offset = <0x1040>;
|
|
ngpios = <20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&ap_pinctrl 0 0 20>;
|
|
};
|
|
};
|
|
|
|
ap_syscon1: system-controller@6f8000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x6f8000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ap_thermal: thermal-sensor@80 {
|
|
compatible = "marvell,armada-ap806-thermal";
|
|
reg = <0x80 0x10>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* The thermal IP features one internal sensor plus, if applicable, one
|
|
* remote channel wired to one sensor per CPU.
|
|
*
|
|
* The cooling maps are always empty as there are no cooling devices.
|
|
*/
|
|
thermal-zones {
|
|
ap_thermal_ic: ap-thermal-ic {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&ap_thermal 0>;
|
|
|
|
trips { };
|
|
cooling-maps { };
|
|
};
|
|
|
|
ap_thermal_cpu1: ap-thermal-cpu1 {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&ap_thermal 1>;
|
|
|
|
trips { };
|
|
cooling-maps { };
|
|
};
|
|
|
|
ap_thermal_cpu2: ap-thermal-cpu2 {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&ap_thermal 2>;
|
|
|
|
trips { };
|
|
cooling-maps { };
|
|
};
|
|
|
|
ap_thermal_cpu3: ap-thermal-cpu3 {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&ap_thermal 3>;
|
|
|
|
trips { };
|
|
cooling-maps { };
|
|
};
|
|
|
|
ap_thermal_cpu4: ap-thermal-cpu4 {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&ap_thermal 4>;
|
|
|
|
trips { };
|
|
cooling-maps { };
|
|
};
|
|
};
|
|
};
|