linux_dsm_epyc7002/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
Linus Walleij 1a780d45b1 ARM: ux500: move GPIO key configuration to device tree
This moves over the configuration of the GPIO keys (used for
proximity sensor and Hall effect sensor) from the static pin
configuration file to the device tree. As part of the exercise,
implement the GPIO keys properly in a per-UIB file as this
setup actually differs with each UIB.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 21:01:56 +01:00

176 lines
4.4 KiB
Plaintext

/*
* Copyright 2012 ST-Ericsson
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/pinctrl/nomadik.h>
/ {
in_nopull: in_nopull {
ste,input = <INPUT_NOPULL>;
};
in_pu: input_pull_up {
ste,input = <INPUT_PULLUP>;
};
in_pd: input_pull_down {
ste,input = <INPUT_PULLDOWN>;
};
out_hi: output_high {
ste,output = <OUTPUT_HIGH>;
};
out_lo: output_low {
ste,output = <OUTPUT_LOW>;
};
gpio_in_pu: gpio_input_pull_up {
ste,gpio = <GPIOMODE_ENABLED>;
ste,input = <INPUT_PULLUP>;
};
gpio_in_pd: gpio_input_pull_down {
ste,gpio = <GPIOMODE_ENABLED>;
ste,input = <INPUT_PULLDOWN>;
};
gpio_out_lo: gpio_output_low {
ste,gpio = <GPIOMODE_ENABLED>;
ste,output = <OUTPUT_LOW>;
};
gpio_out_hi: gpio_output_high {
ste,gpio = <GPIOMODE_ENABLED>;
ste,output = <OUTPUT_HIGH>;
};
slpm_pdis: slpm_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_wkup_pdis: slpm_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_wkup_pdis_en: slpm_wkup_pdis_en {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
};
slpm_in_pu: slpm_in_pu {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_INPUT_PULLUP>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_in_pdis: slpm_in_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_in_wkup_pdis: slpm_in_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
};
slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_INPUT_PULLUP>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
};
slpm_out_lo: slpm_out_lo {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_LOW>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_out_hi: slpm_out_hi {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_out_lo_pdis: slpm_out_lo_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_LOW>;
ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_LOW>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_out_wkup_pdis: slpm_out_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_DIR_OUTPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
in_wkup_pdis: in_wkup_pdis {
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
in_wkup_pdis_en: in_wkup_pdis_en {
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
};
out_lo_wkup_pdis: out_lo_wkup_pdis {
ste,sleep-output = <SLPM_OUTPUT_LOW>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
out_hi_wkup_pdis: out_hi_wkup_pdis {
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
out_wkup_pdis: out_wkup_pdis {
ste,sleep-output = <SLPM_DIR_OUTPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
};