linux_dsm_epyc7002/drivers/pci/htirq.c
Yinghai Lu 6d50bc2683 x86: use 28 bits irq NR for pci msi/msix and ht
also print out irq no in /proc/interrups and /proc/stat in hex, so could
tell bus/dev/func.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:52 +02:00

197 lines
4.5 KiB
C

/*
* File: htirq.c
* Purpose: Hypertransport Interrupt Capability
*
* Copyright (C) 2006 Linux Networx
* Copyright (C) Eric Biederman <ebiederman@lnxi.com>
*/
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/gfp.h>
#include <linux/htirq.h>
/* Global ht irq lock.
*
* This is needed to serialize access to the data port in hypertransport
* irq capability.
*
* With multiple simultaneous hypertransport irq devices it might pay
* to make this more fine grained. But start with simple, stupid, and correct.
*/
static DEFINE_SPINLOCK(ht_irq_lock);
struct ht_irq_cfg {
struct pci_dev *dev;
/* Update callback used to cope with buggy hardware */
ht_irq_update_t *update;
unsigned pos;
unsigned idx;
struct ht_irq_msg msg;
};
void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
unsigned long flags;
spin_lock_irqsave(&ht_irq_lock, flags);
if (cfg->msg.address_lo != msg->address_lo) {
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo);
}
if (cfg->msg.address_hi != msg->address_hi) {
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi);
}
if (cfg->update)
cfg->update(cfg->dev, irq, msg);
spin_unlock_irqrestore(&ht_irq_lock, flags);
cfg->msg = *msg;
}
void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
*msg = cfg->msg;
}
void mask_ht_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
struct ht_irq_msg msg;
cfg = get_irq_data(irq);
msg = cfg->msg;
msg.address_lo |= 1;
write_ht_irq_msg(irq, &msg);
}
void unmask_ht_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
struct ht_irq_msg msg;
cfg = get_irq_data(irq);
msg = cfg->msg;
msg.address_lo &= ~1;
write_ht_irq_msg(irq, &msg);
}
static unsigned int build_irq_for_pci_dev(struct pci_dev *dev)
{
unsigned int irq;
irq = dev->bus->number;
irq <<= 8;
irq |= dev->devfn;
irq <<= 12;
return irq;
}
/**
* __ht_create_irq - create an irq and attach it to a device.
* @dev: The hypertransport device to find the irq capability on.
* @idx: Which of the possible irqs to attach to.
* @update: Function to be called when changing the htirq message
*
* The irq number of the new irq or a negative error value is returned.
*/
int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
{
struct ht_irq_cfg *cfg;
unsigned long flags;
u32 data;
int max_irq;
int pos;
unsigned int irq;
unsigned int irq_want;
pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
if (!pos)
return -EINVAL;
/* Verify the idx I want to use is in range */
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(dev, pos + 2, 1);
pci_read_config_dword(dev, pos + 4, &data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
max_irq = (data >> 16) & 0xff;
if ( idx > max_irq)
return -EINVAL;
cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
if (!cfg)
return -ENOMEM;
cfg->dev = dev;
cfg->update = update;
cfg->pos = pos;
cfg->idx = 0x10 + (idx * 2);
/* Initialize msg to a value that will never match the first write. */
cfg->msg.address_lo = 0xffffffff;
cfg->msg.address_hi = 0xffffffff;
irq_want= build_irq_for_pci_dev(dev);
#ifdef CONFIG_HAVE_SPARSE_IRQ
irq = create_irq_nr(irq_want + idx);
#else
irq = create_irq();
#endif
if (irq == 0) {
kfree(cfg);
return -EBUSY;
}
set_irq_data(irq, cfg);
if (arch_setup_ht_irq(irq, dev) < 0) {
ht_destroy_irq(irq);
return -EBUSY;
}
return irq;
}
/**
* ht_create_irq - create an irq and attach it to a device.
* @dev: The hypertransport device to find the irq capability on.
* @idx: Which of the possible irqs to attach to.
*
* ht_create_irq needs to be called for all hypertransport devices
* that generate irqs.
*
* The irq number of the new irq or a negative error value is returned.
*/
int ht_create_irq(struct pci_dev *dev, int idx)
{
return __ht_create_irq(dev, idx, NULL);
}
/**
* ht_destroy_irq - destroy an irq created with ht_create_irq
*
* This reverses ht_create_irq removing the specified irq from
* existence. The irq should be free before this happens.
*/
void ht_destroy_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
cfg = get_irq_data(irq);
set_irq_chip(irq, NULL);
set_irq_data(irq, NULL);
destroy_irq(irq);
kfree(cfg);
}
EXPORT_SYMBOL(__ht_create_irq);
EXPORT_SYMBOL(ht_create_irq);
EXPORT_SYMBOL(ht_destroy_irq);