linux_dsm_epyc7002/drivers/clk/meson/meson8b.h
Jerome Brunet 05f814402d clk: meson: add fdiv clock gates
Fdiv fixed dividers clocks of the fixed_pll can actually gate
independently. We never had an issue so far because these clocks
were provided 'enabled' by the bootloader.

Add these gates to enable/disable the clocks when required.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13 10:09:58 +01:00

97 lines
3.7 KiB
C

/*
* Copyright (c) 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* Copyright (c) 2016 BayLibre, Inc.
* Michael Turquette <mturquette@baylibre.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __MESON8B_H
#define __MESON8B_H
/*
* Clock controller register offsets
*
* Register offsets from the HardKernel[0] data sheet are listed in comment
* blocks below. Those offsets must be multiplied by 4 before adding them to
* the base address to get the right value
*
* [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
*/
#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */
#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */
#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
#define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */
#define HHI_VID_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
/*
* MPLL register offeset taken from the S905 datasheet. Vendor kernel source
* confirm these are the same for the S805.
*/
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */
#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */
#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */
#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */
#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */
#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */
#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */
#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */
#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */
/*
* CLKID index values
*
* These indices are entirely contrived and do not map onto the hardware.
* It has now been decided to expose everything by default in the DT header:
* include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want
* to expose, such as the internal muxes and dividers of composite clocks,
* will remain defined here.
*/
#define CLKID_MPLL0_DIV 96
#define CLKID_MPLL1_DIV 97
#define CLKID_MPLL2_DIV 98
#define CLKID_CPU_IN_SEL 99
#define CLKID_CPU_DIV2 100
#define CLKID_CPU_DIV3 101
#define CLKID_CPU_SCALE_DIV 102
#define CLKID_CPU_SCALE_OUT_SEL 103
#define CLKID_MPLL_PREDIV 104
#define CLKID_FCLK_DIV2_DIV 105
#define CLKID_FCLK_DIV3_DIV 106
#define CLKID_FCLK_DIV4_DIV 107
#define CLKID_FCLK_DIV5_DIV 108
#define CLKID_FCLK_DIV7_DIV 109
#define CLK_NR_CLKS 110
/*
* include the CLKID and RESETID that have
* been made part of the stable DT binding
*/
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
#endif /* __MESON8B_H */