mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 04:22:19 +07:00
f0c98ebc57
1/ Replace pcommit with ADR / directed-flushing: The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. 2/ On-demand ARS (address range scrub): Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. 3/ Support for the Microsoft DSM (device specific method) command format. 4/ Support for EDK2/OVMF virtual disk device memory ranges. 5/ Various fixes and cleanups across the subsystem. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXmXBsAAoJEB7SkWpmfYgCEwwP/1IOt9ocP+iHLMDH9KE7VaTZ NmUDR+Zy6g5cRQM7SgcuU5BXUcx+OsSrSrUTVF1cW994o9Gbz1mFotkv0ZAsPcYY ZVRQxo2oqHrssyOcg+PsgKWiXn68rJOCgmpEyzaJywl5qTMst7pzsT1s1f7rSh6h trCf4VaJJwxZR8fARGtlHUnnhPe2Orp99EZRKEWprAsIv2kPuWpPHSjRjuEgN1JG KW8AYwWqFTtiLRUk86I4KBB0wcDrfctsjgN9Ogd6+aHyQBRnVSr2U+vDCFkC8KLu qiDCpYp+yyxBjclnljz7tRRT3GtzfCUWd4v2KVWqgg2IaobUc0Lbukp/rmikUXQP WLikT2OCQ994eFK5OX3Q3cIU/4j459TQnof8q14yVSpjAKrNUXVSR5puN7Hxa+V7 41wKrAsnsyY1oq+Yd/rMR8VfH7PHx3bFkrmRCGZCufLX1UQm4aYj+sWagDKiV3yA DiudghbOnhfurfGsnXUVw7y7GKs+gNWNBmB6ndAD6ZEHmKoGUhAEbJDLCc3DnANl b/2mv1MIdIcC1DlCmnbbcn6fv6bICe/r8poK3VrCK3UgOq/EOvKIWl7giP+k1JuC 6DdVYhlNYIVFXUNSLFAwz8OkLu8byx7WDm36iEqrKHtPw+8qa/2bWVgOU6OBgpjV cN3edFVIdxvZeMgM5Ubq =xCBG -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...
1097 lines
27 KiB
C
1097 lines
27 KiB
C
/*
|
|
* dcssblk.c -- the S/390 block driver for dcss memory
|
|
*
|
|
* Authors: Carsten Otte, Stefan Weinhuber, Gerald Schaefer
|
|
*/
|
|
|
|
#define KMSG_COMPONENT "dcssblk"
|
|
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pfn_t.h>
|
|
#include <asm/extmem.h>
|
|
#include <asm/io.h>
|
|
|
|
#define DCSSBLK_NAME "dcssblk"
|
|
#define DCSSBLK_MINORS_PER_DISK 1
|
|
#define DCSSBLK_PARM_LEN 400
|
|
#define DCSS_BUS_ID_SIZE 20
|
|
|
|
static int dcssblk_open(struct block_device *bdev, fmode_t mode);
|
|
static void dcssblk_release(struct gendisk *disk, fmode_t mode);
|
|
static blk_qc_t dcssblk_make_request(struct request_queue *q,
|
|
struct bio *bio);
|
|
static long dcssblk_direct_access(struct block_device *bdev, sector_t secnum,
|
|
void **kaddr, pfn_t *pfn, long size);
|
|
|
|
static char dcssblk_segments[DCSSBLK_PARM_LEN] = "\0";
|
|
|
|
static int dcssblk_major;
|
|
static const struct block_device_operations dcssblk_devops = {
|
|
.owner = THIS_MODULE,
|
|
.open = dcssblk_open,
|
|
.release = dcssblk_release,
|
|
.direct_access = dcssblk_direct_access,
|
|
};
|
|
|
|
struct dcssblk_dev_info {
|
|
struct list_head lh;
|
|
struct device dev;
|
|
char segment_name[DCSS_BUS_ID_SIZE];
|
|
atomic_t use_count;
|
|
struct gendisk *gd;
|
|
unsigned long start;
|
|
unsigned long end;
|
|
int segment_type;
|
|
unsigned char save_pending;
|
|
unsigned char is_shared;
|
|
struct request_queue *dcssblk_queue;
|
|
int num_of_segments;
|
|
struct list_head seg_list;
|
|
};
|
|
|
|
struct segment_info {
|
|
struct list_head lh;
|
|
char segment_name[DCSS_BUS_ID_SIZE];
|
|
unsigned long start;
|
|
unsigned long end;
|
|
int segment_type;
|
|
};
|
|
|
|
static ssize_t dcssblk_add_store(struct device * dev, struct device_attribute *attr, const char * buf,
|
|
size_t count);
|
|
static ssize_t dcssblk_remove_store(struct device * dev, struct device_attribute *attr, const char * buf,
|
|
size_t count);
|
|
|
|
static DEVICE_ATTR(add, S_IWUSR, NULL, dcssblk_add_store);
|
|
static DEVICE_ATTR(remove, S_IWUSR, NULL, dcssblk_remove_store);
|
|
|
|
static struct device *dcssblk_root_dev;
|
|
|
|
static LIST_HEAD(dcssblk_devices);
|
|
static struct rw_semaphore dcssblk_devices_sem;
|
|
|
|
/*
|
|
* release function for segment device.
|
|
*/
|
|
static void
|
|
dcssblk_release_segment(struct device *dev)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *entry, *temp;
|
|
|
|
dev_info = container_of(dev, struct dcssblk_dev_info, dev);
|
|
list_for_each_entry_safe(entry, temp, &dev_info->seg_list, lh) {
|
|
list_del(&entry->lh);
|
|
kfree(entry);
|
|
}
|
|
kfree(dev_info);
|
|
module_put(THIS_MODULE);
|
|
}
|
|
|
|
/*
|
|
* get a minor number. needs to be called with
|
|
* down_write(&dcssblk_devices_sem) and the
|
|
* device needs to be enqueued before the semaphore is
|
|
* freed.
|
|
*/
|
|
static int
|
|
dcssblk_assign_free_minor(struct dcssblk_dev_info *dev_info)
|
|
{
|
|
int minor, found;
|
|
struct dcssblk_dev_info *entry;
|
|
|
|
if (dev_info == NULL)
|
|
return -EINVAL;
|
|
for (minor = 0; minor < (1<<MINORBITS); minor++) {
|
|
found = 0;
|
|
// test if minor available
|
|
list_for_each_entry(entry, &dcssblk_devices, lh)
|
|
if (minor == entry->gd->first_minor)
|
|
found++;
|
|
if (!found) break; // got unused minor
|
|
}
|
|
if (found)
|
|
return -EBUSY;
|
|
dev_info->gd->first_minor = minor;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* get the struct dcssblk_dev_info from dcssblk_devices
|
|
* for the given name.
|
|
* down_read(&dcssblk_devices_sem) must be held.
|
|
*/
|
|
static struct dcssblk_dev_info *
|
|
dcssblk_get_device_by_name(char *name)
|
|
{
|
|
struct dcssblk_dev_info *entry;
|
|
|
|
list_for_each_entry(entry, &dcssblk_devices, lh) {
|
|
if (!strcmp(name, entry->segment_name)) {
|
|
return entry;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* get the struct segment_info from seg_list
|
|
* for the given name.
|
|
* down_read(&dcssblk_devices_sem) must be held.
|
|
*/
|
|
static struct segment_info *
|
|
dcssblk_get_segment_by_name(char *name)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *entry;
|
|
|
|
list_for_each_entry(dev_info, &dcssblk_devices, lh) {
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
if (!strcmp(name, entry->segment_name))
|
|
return entry;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* get the highest address of the multi-segment block.
|
|
*/
|
|
static unsigned long
|
|
dcssblk_find_highest_addr(struct dcssblk_dev_info *dev_info)
|
|
{
|
|
unsigned long highest_addr;
|
|
struct segment_info *entry;
|
|
|
|
highest_addr = 0;
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
if (highest_addr < entry->end)
|
|
highest_addr = entry->end;
|
|
}
|
|
return highest_addr;
|
|
}
|
|
|
|
/*
|
|
* get the lowest address of the multi-segment block.
|
|
*/
|
|
static unsigned long
|
|
dcssblk_find_lowest_addr(struct dcssblk_dev_info *dev_info)
|
|
{
|
|
int set_first;
|
|
unsigned long lowest_addr;
|
|
struct segment_info *entry;
|
|
|
|
set_first = 0;
|
|
lowest_addr = 0;
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
if (set_first == 0) {
|
|
lowest_addr = entry->start;
|
|
set_first = 1;
|
|
} else {
|
|
if (lowest_addr > entry->start)
|
|
lowest_addr = entry->start;
|
|
}
|
|
}
|
|
return lowest_addr;
|
|
}
|
|
|
|
/*
|
|
* Check continuity of segments.
|
|
*/
|
|
static int
|
|
dcssblk_is_continuous(struct dcssblk_dev_info *dev_info)
|
|
{
|
|
int i, j, rc;
|
|
struct segment_info *sort_list, *entry, temp;
|
|
|
|
if (dev_info->num_of_segments <= 1)
|
|
return 0;
|
|
|
|
sort_list = kzalloc(
|
|
sizeof(struct segment_info) * dev_info->num_of_segments,
|
|
GFP_KERNEL);
|
|
if (sort_list == NULL)
|
|
return -ENOMEM;
|
|
i = 0;
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
memcpy(&sort_list[i], entry, sizeof(struct segment_info));
|
|
i++;
|
|
}
|
|
|
|
/* sort segments */
|
|
for (i = 0; i < dev_info->num_of_segments; i++)
|
|
for (j = 0; j < dev_info->num_of_segments; j++)
|
|
if (sort_list[j].start > sort_list[i].start) {
|
|
memcpy(&temp, &sort_list[i],
|
|
sizeof(struct segment_info));
|
|
memcpy(&sort_list[i], &sort_list[j],
|
|
sizeof(struct segment_info));
|
|
memcpy(&sort_list[j], &temp,
|
|
sizeof(struct segment_info));
|
|
}
|
|
|
|
/* check continuity */
|
|
for (i = 0; i < dev_info->num_of_segments - 1; i++) {
|
|
if ((sort_list[i].end + 1) != sort_list[i+1].start) {
|
|
pr_err("Adjacent DCSSs %s and %s are not "
|
|
"contiguous\n", sort_list[i].segment_name,
|
|
sort_list[i+1].segment_name);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
/* EN and EW are allowed in a block device */
|
|
if (sort_list[i].segment_type != sort_list[i+1].segment_type) {
|
|
if (!(sort_list[i].segment_type & SEGMENT_EXCLUSIVE) ||
|
|
(sort_list[i].segment_type == SEG_TYPE_ER) ||
|
|
!(sort_list[i+1].segment_type &
|
|
SEGMENT_EXCLUSIVE) ||
|
|
(sort_list[i+1].segment_type == SEG_TYPE_ER)) {
|
|
pr_err("DCSS %s and DCSS %s have "
|
|
"incompatible types\n",
|
|
sort_list[i].segment_name,
|
|
sort_list[i+1].segment_name);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
rc = 0;
|
|
out:
|
|
kfree(sort_list);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Load a segment
|
|
*/
|
|
static int
|
|
dcssblk_load_segment(char *name, struct segment_info **seg_info)
|
|
{
|
|
int rc;
|
|
|
|
/* already loaded? */
|
|
down_read(&dcssblk_devices_sem);
|
|
*seg_info = dcssblk_get_segment_by_name(name);
|
|
up_read(&dcssblk_devices_sem);
|
|
if (*seg_info != NULL)
|
|
return -EEXIST;
|
|
|
|
/* get a struct segment_info */
|
|
*seg_info = kzalloc(sizeof(struct segment_info), GFP_KERNEL);
|
|
if (*seg_info == NULL)
|
|
return -ENOMEM;
|
|
|
|
strcpy((*seg_info)->segment_name, name);
|
|
|
|
/* load the segment */
|
|
rc = segment_load(name, SEGMENT_SHARED,
|
|
&(*seg_info)->start, &(*seg_info)->end);
|
|
if (rc < 0) {
|
|
segment_warning(rc, (*seg_info)->segment_name);
|
|
kfree(*seg_info);
|
|
} else {
|
|
INIT_LIST_HEAD(&(*seg_info)->lh);
|
|
(*seg_info)->segment_type = rc;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* device attribute for switching shared/nonshared (exclusive)
|
|
* operation (show + store)
|
|
*/
|
|
static ssize_t
|
|
dcssblk_shared_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
|
|
dev_info = container_of(dev, struct dcssblk_dev_info, dev);
|
|
return sprintf(buf, dev_info->is_shared ? "1\n" : "0\n");
|
|
}
|
|
|
|
static ssize_t
|
|
dcssblk_shared_store(struct device *dev, struct device_attribute *attr, const char *inbuf, size_t count)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *entry, *temp;
|
|
int rc;
|
|
|
|
if ((count > 1) && (inbuf[1] != '\n') && (inbuf[1] != '\0'))
|
|
return -EINVAL;
|
|
down_write(&dcssblk_devices_sem);
|
|
dev_info = container_of(dev, struct dcssblk_dev_info, dev);
|
|
if (atomic_read(&dev_info->use_count)) {
|
|
rc = -EBUSY;
|
|
goto out;
|
|
}
|
|
if (inbuf[0] == '1') {
|
|
/* reload segments in shared mode */
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
rc = segment_modify_shared(entry->segment_name,
|
|
SEGMENT_SHARED);
|
|
if (rc < 0) {
|
|
BUG_ON(rc == -EINVAL);
|
|
if (rc != -EAGAIN)
|
|
goto removeseg;
|
|
}
|
|
}
|
|
dev_info->is_shared = 1;
|
|
switch (dev_info->segment_type) {
|
|
case SEG_TYPE_SR:
|
|
case SEG_TYPE_ER:
|
|
case SEG_TYPE_SC:
|
|
set_disk_ro(dev_info->gd, 1);
|
|
}
|
|
} else if (inbuf[0] == '0') {
|
|
/* reload segments in exclusive mode */
|
|
if (dev_info->segment_type == SEG_TYPE_SC) {
|
|
pr_err("DCSS %s is of type SC and cannot be "
|
|
"loaded as exclusive-writable\n",
|
|
dev_info->segment_name);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
rc = segment_modify_shared(entry->segment_name,
|
|
SEGMENT_EXCLUSIVE);
|
|
if (rc < 0) {
|
|
BUG_ON(rc == -EINVAL);
|
|
if (rc != -EAGAIN)
|
|
goto removeseg;
|
|
}
|
|
}
|
|
dev_info->is_shared = 0;
|
|
set_disk_ro(dev_info->gd, 0);
|
|
} else {
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
rc = count;
|
|
goto out;
|
|
|
|
removeseg:
|
|
pr_err("DCSS device %s is removed after a failed access mode "
|
|
"change\n", dev_info->segment_name);
|
|
temp = entry;
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
if (entry != temp)
|
|
segment_unload(entry->segment_name);
|
|
}
|
|
list_del(&dev_info->lh);
|
|
|
|
del_gendisk(dev_info->gd);
|
|
blk_cleanup_queue(dev_info->dcssblk_queue);
|
|
dev_info->gd->queue = NULL;
|
|
put_disk(dev_info->gd);
|
|
up_write(&dcssblk_devices_sem);
|
|
|
|
if (device_remove_file_self(dev, attr)) {
|
|
device_unregister(dev);
|
|
put_device(dev);
|
|
}
|
|
return rc;
|
|
out:
|
|
up_write(&dcssblk_devices_sem);
|
|
return rc;
|
|
}
|
|
static DEVICE_ATTR(shared, S_IWUSR | S_IRUSR, dcssblk_shared_show,
|
|
dcssblk_shared_store);
|
|
|
|
/*
|
|
* device attribute for save operation on current copy
|
|
* of the segment. If the segment is busy, saving will
|
|
* become pending until it gets released, which can be
|
|
* undone by storing a non-true value to this entry.
|
|
* (show + store)
|
|
*/
|
|
static ssize_t
|
|
dcssblk_save_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
|
|
dev_info = container_of(dev, struct dcssblk_dev_info, dev);
|
|
return sprintf(buf, dev_info->save_pending ? "1\n" : "0\n");
|
|
}
|
|
|
|
static ssize_t
|
|
dcssblk_save_store(struct device *dev, struct device_attribute *attr, const char *inbuf, size_t count)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *entry;
|
|
|
|
if ((count > 1) && (inbuf[1] != '\n') && (inbuf[1] != '\0'))
|
|
return -EINVAL;
|
|
dev_info = container_of(dev, struct dcssblk_dev_info, dev);
|
|
|
|
down_write(&dcssblk_devices_sem);
|
|
if (inbuf[0] == '1') {
|
|
if (atomic_read(&dev_info->use_count) == 0) {
|
|
// device is idle => we save immediately
|
|
pr_info("All DCSSs that map to device %s are "
|
|
"saved\n", dev_info->segment_name);
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
if (entry->segment_type == SEG_TYPE_EN ||
|
|
entry->segment_type == SEG_TYPE_SN)
|
|
pr_warn("DCSS %s is of type SN or EN"
|
|
" and cannot be saved\n",
|
|
entry->segment_name);
|
|
else
|
|
segment_save(entry->segment_name);
|
|
}
|
|
} else {
|
|
// device is busy => we save it when it becomes
|
|
// idle in dcssblk_release
|
|
pr_info("Device %s is in use, its DCSSs will be "
|
|
"saved when it becomes idle\n",
|
|
dev_info->segment_name);
|
|
dev_info->save_pending = 1;
|
|
}
|
|
} else if (inbuf[0] == '0') {
|
|
if (dev_info->save_pending) {
|
|
// device is busy & the user wants to undo his save
|
|
// request
|
|
dev_info->save_pending = 0;
|
|
pr_info("A pending save request for device %s "
|
|
"has been canceled\n",
|
|
dev_info->segment_name);
|
|
}
|
|
} else {
|
|
up_write(&dcssblk_devices_sem);
|
|
return -EINVAL;
|
|
}
|
|
up_write(&dcssblk_devices_sem);
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR(save, S_IWUSR | S_IRUSR, dcssblk_save_show,
|
|
dcssblk_save_store);
|
|
|
|
/*
|
|
* device attribute for showing all segments in a device
|
|
*/
|
|
static ssize_t
|
|
dcssblk_seglist_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int i;
|
|
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *entry;
|
|
|
|
down_read(&dcssblk_devices_sem);
|
|
dev_info = container_of(dev, struct dcssblk_dev_info, dev);
|
|
i = 0;
|
|
buf[0] = '\0';
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
strcpy(&buf[i], entry->segment_name);
|
|
i += strlen(entry->segment_name);
|
|
buf[i] = '\n';
|
|
i++;
|
|
}
|
|
up_read(&dcssblk_devices_sem);
|
|
return i;
|
|
}
|
|
static DEVICE_ATTR(seglist, S_IRUSR, dcssblk_seglist_show, NULL);
|
|
|
|
static struct attribute *dcssblk_dev_attrs[] = {
|
|
&dev_attr_shared.attr,
|
|
&dev_attr_save.attr,
|
|
&dev_attr_seglist.attr,
|
|
NULL,
|
|
};
|
|
static struct attribute_group dcssblk_dev_attr_group = {
|
|
.attrs = dcssblk_dev_attrs,
|
|
};
|
|
static const struct attribute_group *dcssblk_dev_attr_groups[] = {
|
|
&dcssblk_dev_attr_group,
|
|
NULL,
|
|
};
|
|
|
|
/*
|
|
* device attribute for adding devices
|
|
*/
|
|
static ssize_t
|
|
dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
int rc, i, j, num_of_segments;
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *seg_info, *temp;
|
|
char *local_buf;
|
|
unsigned long seg_byte_size;
|
|
|
|
dev_info = NULL;
|
|
seg_info = NULL;
|
|
if (dev != dcssblk_root_dev) {
|
|
rc = -EINVAL;
|
|
goto out_nobuf;
|
|
}
|
|
if ((count < 1) || (buf[0] == '\0') || (buf[0] == '\n')) {
|
|
rc = -ENAMETOOLONG;
|
|
goto out_nobuf;
|
|
}
|
|
|
|
local_buf = kmalloc(count + 1, GFP_KERNEL);
|
|
if (local_buf == NULL) {
|
|
rc = -ENOMEM;
|
|
goto out_nobuf;
|
|
}
|
|
|
|
/*
|
|
* parse input
|
|
*/
|
|
num_of_segments = 0;
|
|
for (i = 0; (i < count && (buf[i] != '\0') && (buf[i] != '\n')); i++) {
|
|
for (j = i; j < count &&
|
|
(buf[j] != ':') &&
|
|
(buf[j] != '\0') &&
|
|
(buf[j] != '\n'); j++) {
|
|
local_buf[j-i] = toupper(buf[j]);
|
|
}
|
|
local_buf[j-i] = '\0';
|
|
if (((j - i) == 0) || ((j - i) > 8)) {
|
|
rc = -ENAMETOOLONG;
|
|
goto seg_list_del;
|
|
}
|
|
|
|
rc = dcssblk_load_segment(local_buf, &seg_info);
|
|
if (rc < 0)
|
|
goto seg_list_del;
|
|
/*
|
|
* get a struct dcssblk_dev_info
|
|
*/
|
|
if (num_of_segments == 0) {
|
|
dev_info = kzalloc(sizeof(struct dcssblk_dev_info),
|
|
GFP_KERNEL);
|
|
if (dev_info == NULL) {
|
|
rc = -ENOMEM;
|
|
goto out;
|
|
}
|
|
strcpy(dev_info->segment_name, local_buf);
|
|
dev_info->segment_type = seg_info->segment_type;
|
|
INIT_LIST_HEAD(&dev_info->seg_list);
|
|
}
|
|
list_add_tail(&seg_info->lh, &dev_info->seg_list);
|
|
num_of_segments++;
|
|
i = j;
|
|
|
|
if ((buf[j] == '\0') || (buf[j] == '\n'))
|
|
break;
|
|
}
|
|
|
|
/* no trailing colon at the end of the input */
|
|
if ((i > 0) && (buf[i-1] == ':')) {
|
|
rc = -ENAMETOOLONG;
|
|
goto seg_list_del;
|
|
}
|
|
strlcpy(local_buf, buf, i + 1);
|
|
dev_info->num_of_segments = num_of_segments;
|
|
rc = dcssblk_is_continuous(dev_info);
|
|
if (rc < 0)
|
|
goto seg_list_del;
|
|
|
|
dev_info->start = dcssblk_find_lowest_addr(dev_info);
|
|
dev_info->end = dcssblk_find_highest_addr(dev_info);
|
|
|
|
dev_set_name(&dev_info->dev, "%s", dev_info->segment_name);
|
|
dev_info->dev.release = dcssblk_release_segment;
|
|
dev_info->dev.groups = dcssblk_dev_attr_groups;
|
|
INIT_LIST_HEAD(&dev_info->lh);
|
|
dev_info->gd = alloc_disk(DCSSBLK_MINORS_PER_DISK);
|
|
if (dev_info->gd == NULL) {
|
|
rc = -ENOMEM;
|
|
goto seg_list_del;
|
|
}
|
|
dev_info->gd->major = dcssblk_major;
|
|
dev_info->gd->fops = &dcssblk_devops;
|
|
dev_info->dcssblk_queue = blk_alloc_queue(GFP_KERNEL);
|
|
dev_info->gd->queue = dev_info->dcssblk_queue;
|
|
dev_info->gd->private_data = dev_info;
|
|
blk_queue_make_request(dev_info->dcssblk_queue, dcssblk_make_request);
|
|
blk_queue_logical_block_size(dev_info->dcssblk_queue, 4096);
|
|
queue_flag_set_unlocked(QUEUE_FLAG_DAX, dev_info->dcssblk_queue);
|
|
|
|
seg_byte_size = (dev_info->end - dev_info->start + 1);
|
|
set_capacity(dev_info->gd, seg_byte_size >> 9); // size in sectors
|
|
pr_info("Loaded %s with total size %lu bytes and capacity %lu "
|
|
"sectors\n", local_buf, seg_byte_size, seg_byte_size >> 9);
|
|
|
|
dev_info->save_pending = 0;
|
|
dev_info->is_shared = 1;
|
|
dev_info->dev.parent = dcssblk_root_dev;
|
|
|
|
/*
|
|
*get minor, add to list
|
|
*/
|
|
down_write(&dcssblk_devices_sem);
|
|
if (dcssblk_get_segment_by_name(local_buf)) {
|
|
rc = -EEXIST;
|
|
goto release_gd;
|
|
}
|
|
rc = dcssblk_assign_free_minor(dev_info);
|
|
if (rc)
|
|
goto release_gd;
|
|
sprintf(dev_info->gd->disk_name, "dcssblk%d",
|
|
dev_info->gd->first_minor);
|
|
list_add_tail(&dev_info->lh, &dcssblk_devices);
|
|
|
|
if (!try_module_get(THIS_MODULE)) {
|
|
rc = -ENODEV;
|
|
goto dev_list_del;
|
|
}
|
|
/*
|
|
* register the device
|
|
*/
|
|
rc = device_register(&dev_info->dev);
|
|
if (rc)
|
|
goto put_dev;
|
|
|
|
get_device(&dev_info->dev);
|
|
device_add_disk(&dev_info->dev, dev_info->gd);
|
|
|
|
switch (dev_info->segment_type) {
|
|
case SEG_TYPE_SR:
|
|
case SEG_TYPE_ER:
|
|
case SEG_TYPE_SC:
|
|
set_disk_ro(dev_info->gd,1);
|
|
break;
|
|
default:
|
|
set_disk_ro(dev_info->gd,0);
|
|
break;
|
|
}
|
|
up_write(&dcssblk_devices_sem);
|
|
rc = count;
|
|
goto out;
|
|
|
|
put_dev:
|
|
list_del(&dev_info->lh);
|
|
blk_cleanup_queue(dev_info->dcssblk_queue);
|
|
dev_info->gd->queue = NULL;
|
|
put_disk(dev_info->gd);
|
|
list_for_each_entry(seg_info, &dev_info->seg_list, lh) {
|
|
segment_unload(seg_info->segment_name);
|
|
}
|
|
put_device(&dev_info->dev);
|
|
up_write(&dcssblk_devices_sem);
|
|
goto out;
|
|
dev_list_del:
|
|
list_del(&dev_info->lh);
|
|
release_gd:
|
|
blk_cleanup_queue(dev_info->dcssblk_queue);
|
|
dev_info->gd->queue = NULL;
|
|
put_disk(dev_info->gd);
|
|
up_write(&dcssblk_devices_sem);
|
|
seg_list_del:
|
|
if (dev_info == NULL)
|
|
goto out;
|
|
list_for_each_entry_safe(seg_info, temp, &dev_info->seg_list, lh) {
|
|
list_del(&seg_info->lh);
|
|
segment_unload(seg_info->segment_name);
|
|
kfree(seg_info);
|
|
}
|
|
kfree(dev_info);
|
|
out:
|
|
kfree(local_buf);
|
|
out_nobuf:
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* device attribute for removing devices
|
|
*/
|
|
static ssize_t
|
|
dcssblk_remove_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *entry;
|
|
int rc, i;
|
|
char *local_buf;
|
|
|
|
if (dev != dcssblk_root_dev) {
|
|
return -EINVAL;
|
|
}
|
|
local_buf = kmalloc(count + 1, GFP_KERNEL);
|
|
if (local_buf == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
/*
|
|
* parse input
|
|
*/
|
|
for (i = 0; (i < count && (*(buf+i)!='\0') && (*(buf+i)!='\n')); i++) {
|
|
local_buf[i] = toupper(buf[i]);
|
|
}
|
|
local_buf[i] = '\0';
|
|
if ((i == 0) || (i > 8)) {
|
|
rc = -ENAMETOOLONG;
|
|
goto out_buf;
|
|
}
|
|
|
|
down_write(&dcssblk_devices_sem);
|
|
dev_info = dcssblk_get_device_by_name(local_buf);
|
|
if (dev_info == NULL) {
|
|
up_write(&dcssblk_devices_sem);
|
|
pr_warn("Device %s cannot be removed because it is not a known device\n",
|
|
local_buf);
|
|
rc = -ENODEV;
|
|
goto out_buf;
|
|
}
|
|
if (atomic_read(&dev_info->use_count) != 0) {
|
|
up_write(&dcssblk_devices_sem);
|
|
pr_warn("Device %s cannot be removed while it is in use\n",
|
|
local_buf);
|
|
rc = -EBUSY;
|
|
goto out_buf;
|
|
}
|
|
|
|
list_del(&dev_info->lh);
|
|
del_gendisk(dev_info->gd);
|
|
blk_cleanup_queue(dev_info->dcssblk_queue);
|
|
dev_info->gd->queue = NULL;
|
|
put_disk(dev_info->gd);
|
|
|
|
/* unload all related segments */
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh)
|
|
segment_unload(entry->segment_name);
|
|
|
|
up_write(&dcssblk_devices_sem);
|
|
|
|
device_unregister(&dev_info->dev);
|
|
put_device(&dev_info->dev);
|
|
|
|
rc = count;
|
|
out_buf:
|
|
kfree(local_buf);
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
dcssblk_open(struct block_device *bdev, fmode_t mode)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
int rc;
|
|
|
|
dev_info = bdev->bd_disk->private_data;
|
|
if (NULL == dev_info) {
|
|
rc = -ENODEV;
|
|
goto out;
|
|
}
|
|
atomic_inc(&dev_info->use_count);
|
|
bdev->bd_block_size = 4096;
|
|
rc = 0;
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
dcssblk_release(struct gendisk *disk, fmode_t mode)
|
|
{
|
|
struct dcssblk_dev_info *dev_info = disk->private_data;
|
|
struct segment_info *entry;
|
|
|
|
if (!dev_info) {
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
down_write(&dcssblk_devices_sem);
|
|
if (atomic_dec_and_test(&dev_info->use_count)
|
|
&& (dev_info->save_pending)) {
|
|
pr_info("Device %s has become idle and is being saved "
|
|
"now\n", dev_info->segment_name);
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
if (entry->segment_type == SEG_TYPE_EN ||
|
|
entry->segment_type == SEG_TYPE_SN)
|
|
pr_warn("DCSS %s is of type SN or EN and cannot"
|
|
" be saved\n", entry->segment_name);
|
|
else
|
|
segment_save(entry->segment_name);
|
|
}
|
|
dev_info->save_pending = 0;
|
|
}
|
|
up_write(&dcssblk_devices_sem);
|
|
}
|
|
|
|
static blk_qc_t
|
|
dcssblk_make_request(struct request_queue *q, struct bio *bio)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct bio_vec bvec;
|
|
struct bvec_iter iter;
|
|
unsigned long index;
|
|
unsigned long page_addr;
|
|
unsigned long source_addr;
|
|
unsigned long bytes_done;
|
|
|
|
blk_queue_split(q, &bio, q->bio_split);
|
|
|
|
bytes_done = 0;
|
|
dev_info = bio->bi_bdev->bd_disk->private_data;
|
|
if (dev_info == NULL)
|
|
goto fail;
|
|
if ((bio->bi_iter.bi_sector & 7) != 0 ||
|
|
(bio->bi_iter.bi_size & 4095) != 0)
|
|
/* Request is not page-aligned. */
|
|
goto fail;
|
|
if (bio_end_sector(bio) > get_capacity(bio->bi_bdev->bd_disk)) {
|
|
/* Request beyond end of DCSS segment. */
|
|
goto fail;
|
|
}
|
|
/* verify data transfer direction */
|
|
if (dev_info->is_shared) {
|
|
switch (dev_info->segment_type) {
|
|
case SEG_TYPE_SR:
|
|
case SEG_TYPE_ER:
|
|
case SEG_TYPE_SC:
|
|
/* cannot write to these segments */
|
|
if (bio_data_dir(bio) == WRITE) {
|
|
pr_warn("Writing to %s failed because it is a read-only device\n",
|
|
dev_name(&dev_info->dev));
|
|
goto fail;
|
|
}
|
|
}
|
|
}
|
|
|
|
index = (bio->bi_iter.bi_sector >> 3);
|
|
bio_for_each_segment(bvec, bio, iter) {
|
|
page_addr = (unsigned long)
|
|
page_address(bvec.bv_page) + bvec.bv_offset;
|
|
source_addr = dev_info->start + (index<<12) + bytes_done;
|
|
if (unlikely((page_addr & 4095) != 0) || (bvec.bv_len & 4095) != 0)
|
|
// More paranoia.
|
|
goto fail;
|
|
if (bio_data_dir(bio) == READ) {
|
|
memcpy((void*)page_addr, (void*)source_addr,
|
|
bvec.bv_len);
|
|
} else {
|
|
memcpy((void*)source_addr, (void*)page_addr,
|
|
bvec.bv_len);
|
|
}
|
|
bytes_done += bvec.bv_len;
|
|
}
|
|
bio_endio(bio);
|
|
return BLK_QC_T_NONE;
|
|
fail:
|
|
bio_io_error(bio);
|
|
return BLK_QC_T_NONE;
|
|
}
|
|
|
|
static long
|
|
dcssblk_direct_access (struct block_device *bdev, sector_t secnum,
|
|
void **kaddr, pfn_t *pfn, long size)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
unsigned long offset, dev_sz;
|
|
|
|
dev_info = bdev->bd_disk->private_data;
|
|
if (!dev_info)
|
|
return -ENODEV;
|
|
dev_sz = dev_info->end - dev_info->start;
|
|
offset = secnum * 512;
|
|
*kaddr = (void *) dev_info->start + offset;
|
|
*pfn = __pfn_to_pfn_t(PFN_DOWN(dev_info->start + offset), PFN_DEV);
|
|
|
|
return dev_sz - offset;
|
|
}
|
|
|
|
static void
|
|
dcssblk_check_params(void)
|
|
{
|
|
int rc, i, j, k;
|
|
char buf[DCSSBLK_PARM_LEN + 1];
|
|
struct dcssblk_dev_info *dev_info;
|
|
|
|
for (i = 0; (i < DCSSBLK_PARM_LEN) && (dcssblk_segments[i] != '\0');
|
|
i++) {
|
|
for (j = i; (j < DCSSBLK_PARM_LEN) &&
|
|
(dcssblk_segments[j] != ',') &&
|
|
(dcssblk_segments[j] != '\0') &&
|
|
(dcssblk_segments[j] != '('); j++)
|
|
{
|
|
buf[j-i] = dcssblk_segments[j];
|
|
}
|
|
buf[j-i] = '\0';
|
|
rc = dcssblk_add_store(dcssblk_root_dev, NULL, buf, j-i);
|
|
if ((rc >= 0) && (dcssblk_segments[j] == '(')) {
|
|
for (k = 0; (buf[k] != ':') && (buf[k] != '\0'); k++)
|
|
buf[k] = toupper(buf[k]);
|
|
buf[k] = '\0';
|
|
if (!strncmp(&dcssblk_segments[j], "(local)", 7)) {
|
|
down_read(&dcssblk_devices_sem);
|
|
dev_info = dcssblk_get_device_by_name(buf);
|
|
up_read(&dcssblk_devices_sem);
|
|
if (dev_info)
|
|
dcssblk_shared_store(&dev_info->dev,
|
|
NULL, "0\n", 2);
|
|
}
|
|
}
|
|
while ((dcssblk_segments[j] != ',') &&
|
|
(dcssblk_segments[j] != '\0'))
|
|
{
|
|
j++;
|
|
}
|
|
if (dcssblk_segments[j] == '\0')
|
|
break;
|
|
i = j;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Suspend / Resume
|
|
*/
|
|
static int dcssblk_freeze(struct device *dev)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
int rc = 0;
|
|
|
|
list_for_each_entry(dev_info, &dcssblk_devices, lh) {
|
|
switch (dev_info->segment_type) {
|
|
case SEG_TYPE_SR:
|
|
case SEG_TYPE_ER:
|
|
case SEG_TYPE_SC:
|
|
if (!dev_info->is_shared)
|
|
rc = -EINVAL;
|
|
break;
|
|
default:
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
if (rc)
|
|
break;
|
|
}
|
|
if (rc)
|
|
pr_err("Suspending the system failed because DCSS device %s "
|
|
"is writable\n",
|
|
dev_info->segment_name);
|
|
return rc;
|
|
}
|
|
|
|
static int dcssblk_restore(struct device *dev)
|
|
{
|
|
struct dcssblk_dev_info *dev_info;
|
|
struct segment_info *entry;
|
|
unsigned long start, end;
|
|
int rc = 0;
|
|
|
|
list_for_each_entry(dev_info, &dcssblk_devices, lh) {
|
|
list_for_each_entry(entry, &dev_info->seg_list, lh) {
|
|
segment_unload(entry->segment_name);
|
|
rc = segment_load(entry->segment_name, SEGMENT_SHARED,
|
|
&start, &end);
|
|
if (rc < 0) {
|
|
// TODO in_use check ?
|
|
segment_warning(rc, entry->segment_name);
|
|
goto out_panic;
|
|
}
|
|
if (start != entry->start || end != entry->end) {
|
|
pr_err("The address range of DCSS %s changed "
|
|
"while the system was suspended\n",
|
|
entry->segment_name);
|
|
goto out_panic;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
out_panic:
|
|
panic("fatal dcssblk resume error\n");
|
|
}
|
|
|
|
static int dcssblk_thaw(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops dcssblk_pm_ops = {
|
|
.freeze = dcssblk_freeze,
|
|
.thaw = dcssblk_thaw,
|
|
.restore = dcssblk_restore,
|
|
};
|
|
|
|
static struct platform_driver dcssblk_pdrv = {
|
|
.driver = {
|
|
.name = "dcssblk",
|
|
.pm = &dcssblk_pm_ops,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *dcssblk_pdev;
|
|
|
|
|
|
/*
|
|
* The init/exit functions.
|
|
*/
|
|
static void __exit
|
|
dcssblk_exit(void)
|
|
{
|
|
platform_device_unregister(dcssblk_pdev);
|
|
platform_driver_unregister(&dcssblk_pdrv);
|
|
root_device_unregister(dcssblk_root_dev);
|
|
unregister_blkdev(dcssblk_major, DCSSBLK_NAME);
|
|
}
|
|
|
|
static int __init
|
|
dcssblk_init(void)
|
|
{
|
|
int rc;
|
|
|
|
rc = platform_driver_register(&dcssblk_pdrv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
dcssblk_pdev = platform_device_register_simple("dcssblk", -1, NULL,
|
|
0);
|
|
if (IS_ERR(dcssblk_pdev)) {
|
|
rc = PTR_ERR(dcssblk_pdev);
|
|
goto out_pdrv;
|
|
}
|
|
|
|
dcssblk_root_dev = root_device_register("dcssblk");
|
|
if (IS_ERR(dcssblk_root_dev)) {
|
|
rc = PTR_ERR(dcssblk_root_dev);
|
|
goto out_pdev;
|
|
}
|
|
rc = device_create_file(dcssblk_root_dev, &dev_attr_add);
|
|
if (rc)
|
|
goto out_root;
|
|
rc = device_create_file(dcssblk_root_dev, &dev_attr_remove);
|
|
if (rc)
|
|
goto out_root;
|
|
rc = register_blkdev(0, DCSSBLK_NAME);
|
|
if (rc < 0)
|
|
goto out_root;
|
|
dcssblk_major = rc;
|
|
init_rwsem(&dcssblk_devices_sem);
|
|
|
|
dcssblk_check_params();
|
|
return 0;
|
|
|
|
out_root:
|
|
root_device_unregister(dcssblk_root_dev);
|
|
out_pdev:
|
|
platform_device_unregister(dcssblk_pdev);
|
|
out_pdrv:
|
|
platform_driver_unregister(&dcssblk_pdrv);
|
|
return rc;
|
|
}
|
|
|
|
module_init(dcssblk_init);
|
|
module_exit(dcssblk_exit);
|
|
|
|
module_param_string(segments, dcssblk_segments, DCSSBLK_PARM_LEN, 0444);
|
|
MODULE_PARM_DESC(segments, "Name of DCSS segment(s) to be loaded, "
|
|
"comma-separated list, names in each set separated "
|
|
"by commas are separated by colons, each set contains "
|
|
"names of contiguous segments and each name max. 8 chars.\n"
|
|
"Adding \"(local)\" to the end of each set equals echoing 0 "
|
|
"to /sys/devices/dcssblk/<device name>/shared after loading "
|
|
"the contiguous segments - \n"
|
|
"e.g. segments=\"mydcss1,mydcss2:mydcss3,mydcss4(local)\"");
|
|
|
|
MODULE_LICENSE("GPL");
|