mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-27 17:11:37 +07:00
e6717dbaef
Many nodes in the MSM8916 device trees use '_' in node names (especially pinctrl), even though (seemingly) '-' is preferred now. Make this more consistent by replacing '_' with '-' where possible. Similar naming is used for pinctrl in newer device trees (e.g. sdm845.dtsi). Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200514112754.148919-1-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
371 lines
6.6 KiB
Plaintext
371 lines
6.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
#include "msm8916.dtsi"
|
|
#include "pm8916.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
reserved-memory {
|
|
/* Additional memory used by Samsung firmware modifications */
|
|
tz-apps@85500000 {
|
|
reg = <0x0 0x85500000 0x0 0xb00000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
sdhci@7824000 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&pm8916_l8>;
|
|
vqmmc-supply = <&pm8916_l5>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
|
|
};
|
|
|
|
sdhci@7864000 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&pm8916_l11>;
|
|
vqmmc-supply = <&pm8916_l12>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
|
|
|
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
serial@78b0000 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&blsp1_uart2_default>;
|
|
pinctrl-1 = <&blsp1_uart2_sleep>;
|
|
};
|
|
|
|
usb@78d9000 {
|
|
status = "okay";
|
|
extcon = <&muic>, <&muic>;
|
|
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
|
|
ulpi {
|
|
phy {
|
|
extcon = <&muic>;
|
|
v1p8-supply = <&pm8916_l7>;
|
|
v3p3-supply = <&pm8916_l13>;
|
|
};
|
|
};
|
|
};
|
|
|
|
mdss@1a00000 {
|
|
dsi@1a98000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vdda-supply = <&pm8916_l2>;
|
|
vddio-supply = <&pm8916_l6>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&mdss_default>;
|
|
pinctrl-1 = <&mdss_sleep>;
|
|
};
|
|
|
|
dsi-phy@1a98300 {
|
|
vddio-supply = <&pm8916_l6>;
|
|
};
|
|
};
|
|
|
|
wcnss@a21b000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_default>;
|
|
|
|
label = "GPIO Buttons";
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
home {
|
|
label = "Home";
|
|
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_HOMEPAGE>;
|
|
};
|
|
};
|
|
|
|
gpio-hall-sensor {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_hall_sensor_default>;
|
|
|
|
label = "GPIO Hall Effect Sensor";
|
|
|
|
hall-sensor {
|
|
label = "Hall Effect Sensor";
|
|
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
reg_vdd_tsp: regulator-vdd-tsp {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_tsp";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tsp_en_default>;
|
|
};
|
|
|
|
i2c-muic {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
muic: sm5502@25 {
|
|
compatible = "siliconmitus,sm5502-muic";
|
|
|
|
reg = <0x25>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&muic_int_default>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&msmgpio {
|
|
gpio_keys_default: gpio-keys-default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio107", "gpio109";
|
|
};
|
|
pinconf {
|
|
pins = "gpio107", "gpio109";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
gpio_hall_sensor_default: gpio-hall-sensor-default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio52";
|
|
};
|
|
pinconf {
|
|
pins = "gpio52";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
muic_int_default: muic-int-default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio12";
|
|
};
|
|
pinconf {
|
|
pins = "gpio12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
tsp_en_default: tsp-en-default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio73";
|
|
};
|
|
pinconf {
|
|
pins = "gpio73";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pmx-mdss {
|
|
mdss_default: mdss-default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio25";
|
|
};
|
|
pinconf {
|
|
pins = "gpio25";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
mdss_sleep: mdss-sleep {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio25";
|
|
};
|
|
pinconf {
|
|
pins = "gpio25";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&smd_rpm_regulators {
|
|
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
|
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
|
vdd_l7-supply = <&pm8916_s4>;
|
|
|
|
s1 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
};
|
|
|
|
l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l3 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1287500>;
|
|
};
|
|
|
|
l4 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l10 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
l13 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
pm8916@0 {
|
|
pon@800 {
|
|
volume-down {
|
|
compatible = "qcom,pm8941-resin";
|
|
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
|
bias-pull-up;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
};
|
|
};
|