mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-27 17:31:48 +07:00
756d534b3e
apq8016-sbc.dtsi is the only remaining device which takes up
4 files since it has its pinctrl split into separate files.
Actually this does not really make the device tree easier to read
(just harder to find nodes). For db820c the files were merged in
commit 88264f1f6b ("arm64: dts: qcom: db820c: Remove pin specific files").
Do the same for apq8016-sbc (db410c) and move the pinctrl definitions
into apq8016-sbc.dtsi.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200514112754.148919-3-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
934 lines
20 KiB
Plaintext
934 lines
20 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include "msm8916.dtsi"
|
|
#include "pm8916.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
|
#include <dt-bindings/sound/apq8016-lpass.h>
|
|
|
|
/*
|
|
* GPIO name legend: proper name = the GPIO line is used as GPIO
|
|
* NC = not connected (pin out but not routed from the chip to
|
|
* anything the board)
|
|
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
|
|
* LSEC = Low Speed External Connector
|
|
* HSEC = High Speed External Connector
|
|
*
|
|
* Line names are taken from the schematic "DragonBoard410c"
|
|
* dated monday, august 31, 2015. Page 5 in particular.
|
|
*
|
|
* For the lines routed to the external connectors the
|
|
* lines are named after the 96Boards CE Specification 1.0,
|
|
* Appendix "Expansion Connector Signal Description".
|
|
*
|
|
* When the 96Board naming of a line and the schematic name of
|
|
* the same line are in conflict, the 96Board specification
|
|
* takes precedence, which means that the external UART on the
|
|
* LSEC is named UART0 while the schematic and SoC names this
|
|
* UART3. This is only for the informational lines i.e. "[FOO]",
|
|
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
|
|
* ones actually used for GPIO.
|
|
*/
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
serial1 = &blsp1_uart1;
|
|
usid0 = &pm8916_0;
|
|
i2c0 = &blsp_i2c2;
|
|
i2c1 = &blsp_i2c6;
|
|
i2c3 = &blsp_i2c4;
|
|
spi0 = &blsp_spi5;
|
|
spi1 = &blsp_spi3;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
camera_vdddo_1v8: camera-vdddo-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "camera_vdddo";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
camera_vdda_2v8: camera-vdda-2v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "camera_vdda";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
camera_vddd_1v5: camera-vddd-1v5 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "camera_vddd";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reserved-memory {
|
|
ramoops@bff00000{
|
|
compatible = "ramoops";
|
|
reg = <0x0 0xbff00000 0x0 0x100000>;
|
|
|
|
record-size = <0x20000>;
|
|
console-size = <0x20000>;
|
|
ftrace-size = <0x20000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
pinctrl@1000000 {
|
|
gpio-line-names =
|
|
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
|
|
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
|
|
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
|
|
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
|
|
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
|
|
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
|
|
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
|
|
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
|
|
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
|
|
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
|
|
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
|
|
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
|
|
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
|
|
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
|
|
"[I2C3_SDA]", /* HSEC pin 38 */
|
|
"[I2C3_SCL]", /* HSEC pin 36 */
|
|
"[SPI0_MOSI]", /* LSEC pin 14 */
|
|
"[SPI0_MISO]", /* LSEC pin 10 */
|
|
"[SPI0_CS_N]", /* LSEC pin 12 */
|
|
"[SPI0_CLK]", /* LSEC pin 8 */
|
|
"HDMI_HPD_N", /* GPIO 20 */
|
|
"USR_LED_1_CTRL",
|
|
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
|
|
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
|
|
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
|
|
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
|
|
"[CSI0_MCLK]", /* HSEC pin 15 */
|
|
"[CSI1_MCLK]", /* HSEC pin 17 */
|
|
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
|
|
"[I2C2_SDA]", /* HSEC pin 34 */
|
|
"[I2C2_SCL]", /* HSEC pin 32 */
|
|
"DSI2HDMI_INT_N",
|
|
"DSI_SW_SEL_APQ",
|
|
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
|
|
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
|
|
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
|
|
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
|
|
"FORCED_USB_BOOT",
|
|
"SD_CARD_DET_N",
|
|
"[WCSS_BT_SSBI]",
|
|
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
|
|
"[WCSS_WLAN_DATA_1]",
|
|
"[WCSS_WLAN_DATA_0]",
|
|
"[WCSS_WLAN_SET]",
|
|
"[WCSS_WLAN_CLK]",
|
|
"[WCSS_FM_SSBI]",
|
|
"[WCSS_FM_SDI]",
|
|
"[WCSS_BT_DAT_CTL]",
|
|
"[WCSS_BT_DAT_STB]",
|
|
"NC",
|
|
"NC", /* GPIO 50 */
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC", /* GPIO 60 */
|
|
"NC",
|
|
"NC",
|
|
"[CDC_PDM0_CLK]",
|
|
"[CDC_PDM0_SYNC]",
|
|
"[CDC_PDM0_TX0]",
|
|
"[CDC_PDM0_RX0]",
|
|
"[CDC_PDM0_RX1]",
|
|
"[CDC_PDM0_RX2]",
|
|
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
|
|
"NC", /* GPIO 70 */
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC", /* GPIO 74 */
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"BOOT_CONFIG_0", /* GPIO 80 */
|
|
"BOOT_CONFIG_1",
|
|
"BOOT_CONFIG_2",
|
|
"BOOT_CONFIG_3",
|
|
"NC",
|
|
"NC",
|
|
"BOOT_CONFIG_5",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC", /* GPIO 90 */
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC", /* GPIO 100 */
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"SSBI_GPS",
|
|
"NC",
|
|
"NC",
|
|
"KEY_VOLP_N",
|
|
"NC",
|
|
"NC",
|
|
"[LS_EXP_MI2S_WS]", /* GPIO 110 */
|
|
"NC",
|
|
"NC",
|
|
"[LS_EXP_MI2S_SCK]",
|
|
"[LS_EXP_MI2S_DATA0]",
|
|
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
|
|
"NC",
|
|
"[DSI2HDMI_MI2S_WS]",
|
|
"[DSI2HDMI_MI2S_SCK]",
|
|
"[DSI2HDMI_MI2S_DATA0]",
|
|
"USR_LED_2_CTRL", /* GPIO 120 */
|
|
"SB_HS_ID";
|
|
};
|
|
|
|
dma@7884000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@78af000 {
|
|
label = "LS-UART0";
|
|
status = "okay";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&blsp1_uart1_default>;
|
|
pinctrl-1 = <&blsp1_uart1_sleep>;
|
|
};
|
|
|
|
serial@78b0000 {
|
|
label = "LS-UART1";
|
|
status = "okay";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&blsp1_uart2_default>;
|
|
pinctrl-1 = <&blsp1_uart2_sleep>;
|
|
};
|
|
|
|
i2c@78b6000 {
|
|
/* On Low speed expansion */
|
|
label = "LS-I2C0";
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@78b8000 {
|
|
/* On High speed expansion */
|
|
label = "HS-I2C2";
|
|
status = "okay";
|
|
|
|
adv_bridge: bridge@39 {
|
|
status = "okay";
|
|
|
|
compatible = "adi,adv7533";
|
|
reg = <0x39>;
|
|
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <31 2>;
|
|
|
|
adi,dsi-lanes = <4>;
|
|
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
|
|
clock-names = "cec";
|
|
|
|
pd-gpios = <&msmgpio 32 0>;
|
|
|
|
avdd-supply = <&pm8916_l6>;
|
|
v1p2-supply = <&pm8916_l6>;
|
|
v3p3-supply = <&pm8916_l17>;
|
|
|
|
pinctrl-names = "default","sleep";
|
|
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
|
|
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
|
|
#sound-dai-cells = <1>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
adv7533_in: endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
adv7533_out: endpoint {
|
|
remote-endpoint = <&hdmi_con>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@78ba000 {
|
|
/* On Low speed expansion */
|
|
label = "LS-I2C1";
|
|
status = "okay";
|
|
};
|
|
|
|
spi@78b7000 {
|
|
/* On High speed expansion */
|
|
label = "HS-SPI1";
|
|
status = "okay";
|
|
};
|
|
|
|
spi@78b9000 {
|
|
/* On Low speed expansion */
|
|
label = "LS-SPI0";
|
|
status = "okay";
|
|
};
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&msmgpio_leds>,
|
|
<&pm8916_gpios_leds>,
|
|
<&pm8916_mpps_leds>;
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
led@1 {
|
|
label = "apq8016-sbc:green:user1";
|
|
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "off";
|
|
};
|
|
|
|
led@2 {
|
|
label = "apq8016-sbc:green:user2";
|
|
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
|
|
led@3 {
|
|
label = "apq8016-sbc:green:user3";
|
|
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc1";
|
|
default-state = "off";
|
|
};
|
|
|
|
led@4 {
|
|
label = "apq8016-sbc:green:user4";
|
|
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "none";
|
|
panic-indicator;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@5 {
|
|
label = "apq8016-sbc:yellow:wlan";
|
|
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0tx";
|
|
default-state = "off";
|
|
};
|
|
|
|
led@6 {
|
|
label = "apq8016-sbc:blue:bt";
|
|
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "bluetooth-power";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
sdhci@7824000 {
|
|
vmmc-supply = <&pm8916_l8>;
|
|
vqmmc-supply = <&pm8916_l5>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@7864000 {
|
|
vmmc-supply = <&pm8916_l11>;
|
|
vqmmc-supply = <&pm8916_l12>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
|
|
|
cd-gpios = <&msmgpio 38 0x1>;
|
|
status = "okay";
|
|
};
|
|
|
|
usb@78d9000 {
|
|
extcon = <&usb_id>, <&usb_id>;
|
|
status = "okay";
|
|
adp-disable;
|
|
hnp-disable;
|
|
srp-disable;
|
|
dr_mode = "otg";
|
|
pinctrl-names = "default", "device";
|
|
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
|
|
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
|
|
ulpi {
|
|
phy {
|
|
v1p8-supply = <&pm8916_l7>;
|
|
v3p3-supply = <&pm8916_l13>;
|
|
extcon = <&usb_id>;
|
|
};
|
|
};
|
|
};
|
|
|
|
lpass@7708000 {
|
|
status = "okay";
|
|
};
|
|
|
|
mdss@1a00000 {
|
|
status = "okay";
|
|
|
|
mdp@1a01000 {
|
|
status = "okay";
|
|
};
|
|
|
|
dsi@1a98000 {
|
|
status = "okay";
|
|
|
|
vdda-supply = <&pm8916_l2>;
|
|
vddio-supply = <&pm8916_l6>;
|
|
|
|
ports {
|
|
port@1 {
|
|
endpoint {
|
|
remote-endpoint = <&adv7533_in>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi-phy@1a98300 {
|
|
status = "okay";
|
|
|
|
vddio-supply = <&pm8916_l6>;
|
|
};
|
|
};
|
|
|
|
lpass_codec: codec{
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
Internal Codec
|
|
playback - Primary MI2S
|
|
capture - Ter MI2S
|
|
|
|
External Primary:
|
|
playback - secondary MI2S
|
|
capture - Quat MI2S
|
|
|
|
External Secondary:
|
|
playback - Quat MI2S
|
|
capture - Quat MI2S
|
|
|
|
*/
|
|
|
|
sound: sound {
|
|
compatible = "qcom,apq8016-sbc-sndcard";
|
|
reg = <0x07702000 0x4>, <0x07702004 0x4>;
|
|
reg-names = "mic-iomux", "spkr-iomux";
|
|
|
|
status = "okay";
|
|
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
|
|
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
|
|
pinctrl-names = "default", "sleep";
|
|
qcom,model = "DB410c";
|
|
qcom,audio-routing =
|
|
"AMIC2", "MIC BIAS Internal2",
|
|
"AMIC3", "MIC BIAS External1";
|
|
external-dai-link@0 {
|
|
link-name = "ADV7533";
|
|
cpu { /* QUAT */
|
|
sound-dai = <&lpass MI2S_QUATERNARY>;
|
|
};
|
|
codec {
|
|
sound-dai = <&adv_bridge 0>;
|
|
};
|
|
};
|
|
|
|
internal-codec-playback-dai-link@0 { /* I2S - Internal codec */
|
|
link-name = "WCD";
|
|
cpu { /* PRIMARY */
|
|
sound-dai = <&lpass MI2S_PRIMARY>;
|
|
};
|
|
codec {
|
|
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
|
|
};
|
|
};
|
|
|
|
internal-codec-capture-dai-link@0 { /* I2S - Internal codec */
|
|
link-name = "WCD-Capture";
|
|
cpu { /* PRIMARY */
|
|
sound-dai = <&lpass MI2S_TERTIARY>;
|
|
};
|
|
codec {
|
|
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
spmi@200f000 {
|
|
pm8916@0 {
|
|
gpios@c000 {
|
|
gpio-line-names =
|
|
"USR_LED_3_CTRL",
|
|
"USR_LED_4_CTRL",
|
|
"USB_HUB_RESET_N_PM",
|
|
"USB_SW_SEL_PM";
|
|
};
|
|
mpps@a000 {
|
|
gpio-line-names =
|
|
"VDD_PX_BIAS",
|
|
"WLAN_LED_CTRL",
|
|
"BT_LED_CTRL",
|
|
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
|
|
};
|
|
};
|
|
};
|
|
|
|
wcnss@a21b000 {
|
|
status = "okay";
|
|
};
|
|
|
|
tpiu@820000 { status = "okay"; };
|
|
funnel@821000 { status = "okay"; };
|
|
replicator@824000 { status = "okay"; };
|
|
etf@825000 { status = "okay"; };
|
|
etr@826000 { status = "okay"; };
|
|
funnel@841000 { status = "okay"; };
|
|
debug@850000 { status = "okay"; };
|
|
debug@852000 { status = "okay"; };
|
|
debug@854000 { status = "okay"; };
|
|
debug@856000 { status = "okay"; };
|
|
etm@85c000 { status = "okay"; };
|
|
etm@85d000 { status = "okay"; };
|
|
etm@85e000 { status = "okay"; };
|
|
etm@85f000 { status = "okay"; };
|
|
cti@810000 { status = "okay"; };
|
|
cti@811000 { status = "okay"; };
|
|
cti@858000 { status = "okay"; };
|
|
cti@859000 { status = "okay"; };
|
|
cti@85a000 { status = "okay"; };
|
|
cti@85b000 { status = "okay"; };
|
|
};
|
|
|
|
usb2513 {
|
|
compatible = "smsc,usb3503";
|
|
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
|
|
initial-mode = <1>;
|
|
};
|
|
|
|
usb_id: usb-id {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_id_default>;
|
|
};
|
|
|
|
hdmi-out {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con: endpoint {
|
|
remote-endpoint = <&adv7533_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
autorepeat;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&msm_key_volp_n_default>;
|
|
|
|
button@0 {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&camss {
|
|
status = "ok";
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
csiphy0_ep: endpoint {
|
|
clock-lanes = <1>;
|
|
data-lanes = <0 2>;
|
|
remote-endpoint = <&ov5640_ep>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cci {
|
|
status = "ok";
|
|
};
|
|
|
|
&cci_i2c0 {
|
|
camera_rear@3b {
|
|
compatible = "ovti,ov5640";
|
|
reg = <0x3b>;
|
|
|
|
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&camera_rear_default>;
|
|
|
|
clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
|
|
clock-names = "xclk";
|
|
clock-frequency = <23880000>;
|
|
|
|
vdddo-supply = <&camera_vdddo_1v8>;
|
|
vdda-supply = <&camera_vdda_2v8>;
|
|
vddd-supply = <&camera_vddd_1v5>;
|
|
|
|
/* No camera mezzanine by default */
|
|
status = "disabled";
|
|
|
|
port {
|
|
ov5640_ep: endpoint {
|
|
clock-lanes = <1>;
|
|
data-lanes = <0 2>;
|
|
remote-endpoint = <&csiphy0_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
pm8916_0: pm8916@0 {
|
|
pon@800 {
|
|
resin {
|
|
compatible = "qcom,pm8941-resin";
|
|
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
|
debounce = <15625>;
|
|
bias-pull-up;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&wcd_codec {
|
|
status = "okay";
|
|
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
|
|
clock-names = "mclk";
|
|
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
|
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
|
};
|
|
|
|
&smd_rpm_regulators {
|
|
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
|
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
|
vdd_l7-supply = <&pm8916_s4>;
|
|
|
|
s1 {
|
|
regulator-min-microvolt = <375000>;
|
|
regulator-max-microvolt = <1562000>;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <375000>;
|
|
regulator-max-microvolt = <1562000>;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l1 {
|
|
regulator-min-microvolt = <375000>;
|
|
regulator-max-microvolt = <1525000>;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l3 {
|
|
regulator-min-microvolt = <375000>;
|
|
regulator-max-microvolt = <1525000>;
|
|
};
|
|
|
|
l4 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l10 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l13 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
/**
|
|
* 1.8v required on LS expansion
|
|
* for mezzanine boards
|
|
*/
|
|
l15 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3337000>;
|
|
};
|
|
};
|
|
|
|
&msmgpio {
|
|
msmgpio_leds: msmgpio-leds {
|
|
pinconf {
|
|
pins = "gpio21", "gpio120";
|
|
function = "gpio";
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
usb_id_default: usb-id-default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio121";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio121";
|
|
drive-strength = <8>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
adv7533_int_active: adv533-int-active {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio31";
|
|
};
|
|
pinconf {
|
|
pins = "gpio31";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
adv7533_int_suspend: adv7533-int-suspend {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio31";
|
|
};
|
|
pinconf {
|
|
pins = "gpio31";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
adv7533_switch_active: adv7533-switch-active {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio32";
|
|
};
|
|
pinconf {
|
|
pins = "gpio32";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
adv7533_switch_suspend: adv7533-switch-suspend {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio32";
|
|
};
|
|
pinconf {
|
|
pins = "gpio32";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
msm_key_volp_n_default: msm-key-volp-n-default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio107";
|
|
};
|
|
pinconf {
|
|
pins = "gpio107";
|
|
drive-strength = <8>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8916_gpios {
|
|
usb_hub_reset_pm: usb-hub-reset-pm {
|
|
pinconf {
|
|
pins = "gpio3";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
input-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
|
|
pinconf {
|
|
pins = "gpio3";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
usb_sw_sel_pm: usb-sw-sel-pm {
|
|
pinconf {
|
|
pins = "gpio4";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
power-source = <PM8916_GPIO_VPH>;
|
|
input-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
|
|
pinconf {
|
|
pins = "gpio4";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
power-source = <PM8916_GPIO_VPH>;
|
|
input-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
pm8916_gpios_leds: pm8916-gpios-leds {
|
|
pinconf {
|
|
pins = "gpio1", "gpio2";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8916_mpps {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ls_exp_gpio_f>;
|
|
|
|
ls_exp_gpio_f: pm8916-mpp4 {
|
|
pinconf {
|
|
pins = "mpp4";
|
|
function = "digital";
|
|
output-low;
|
|
power-source = <PM8916_MPP_L5>; // 1.8V
|
|
};
|
|
};
|
|
|
|
pm8916_mpps_leds: pm8916-mpps-leds {
|
|
pinconf {
|
|
pins = "mpp2", "mpp3";
|
|
function = "digital";
|
|
output-low;
|
|
};
|
|
};
|
|
};
|