AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 08:46:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
6b667f880f
linux_dsm_epyc7002/arch/arm/mach-omap2/cpuidle34xx.c
Kevin Hilman e7410cf783 OMAP3: PM: move device-specific special cases from PM core into CPUidle 
In an effort to simplify the core idle path, move any device-specific
special case handling from the core PM idle path into the CPUidle
pre-idle checking path.

This keeps the core, interrupts-disabled idle path streamlined and
independent of any device-specific handling, and also allows CPUidle
to do the checking only for certain C-states as needed.  This patch
has the device checks in place for all states with the CHECK_BM flag,
namely all states >= C2.

This patch was inspired by a similar patch written by Tero Kristo as
part of a larger series to add INACTIVE state support.

NOTE: This is a baby-step towards decoupling device idle (or system
idle) from CPU idle.  Eventually, CPUidle should only manage the CPU,
and device/system idle should be managed elsewhere.

Cc: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-23 17:13:50 -07:00

525 lines
15 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/cpuidle34xx.c
*
* OMAP3 CPU IDLE Routines
*
* Copyright (C) 2008 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Karthik Dasu <karthik-dp@ti.com>
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2005 Texas Instruments, Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Based on pm.c for omap2
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/cpuidle.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
#include <plat/control.h>
#include <plat/serial.h>
#include "pm.h"
#ifdef CONFIG_CPU_IDLE
#define OMAP3_MAX_STATES 7
#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */
#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */
#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */
#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */
#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */
#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
#define OMAP3_STATE_MAX OMAP3_STATE_C7
struct omap3_processor_cx {
u8 valid;
u8 type;
u32 sleep_latency;
u32 wakeup_latency;
u32 mpu_state;
u32 core_state;
u32 threshold;
u32 flags;
};
struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
struct omap3_processor_cx current_cx_state;
struct powerdomain *mpu_pd, *core_pd, *per_pd;
struct powerdomain *cam_pd;
/*
* The latencies/thresholds for various C states have
* to be configured from the respective board files.
* These are some default values (which might not provide
* the best power savings) used on boards which do not
* pass these details from the board file.
*/
static struct cpuidle_params cpuidle_params_table[] = {
/* C1 */
{1, 2, 2, 5},
/* C2 */
{1, 10, 10, 30},
/* C3 */
{1, 50, 50, 300},
/* C4 */
{1, 1500, 1800, 4000},
/* C5 */
{1, 2500, 7500, 12000},
/* C6 */
{1, 3000, 8500, 15000},
/* C7 */
{1, 10000, 30000, 300000},
};
static int omap3_idle_bm_check(void)
{
if (!omap3_can_sleep())
return 1;
return 0;
}
static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
struct clockdomain *clkdm)
{
omap2_clkdm_allow_idle(clkdm);
return 0;
}
static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
struct clockdomain *clkdm)
{
omap2_clkdm_deny_idle(clkdm);
return 0;
}
/**
* omap3_enter_idle - Programs OMAP3 to enter the specified state
* @dev: cpuidle device
* @state: The target state to be programmed
*
* Called from the CPUidle framework to program the device to the
* specified target state selected by the governor.
*/
static int omap3_enter_idle(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
current_cx_state = *cx;
/* Used to keep track of the total time in idle */
getnstimeofday(&ts_preidle);
local_irq_disable();
local_fiq_disable();
pwrdm_set_next_pwrst(mpu_pd, mpu_state);
pwrdm_set_next_pwrst(core_pd, core_state);
if (omap_irq_pending() || need_resched())
goto return_sleep_time;
if (cx->type == OMAP3_STATE_C1) {
pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
}
/* Execute ARM wfi */
omap_sram_idle();
if (cx->type == OMAP3_STATE_C1) {
pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
}
return_sleep_time:
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
local_irq_enable();
local_fiq_enable();
return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
}
/**
* next_valid_state - Find next valid c-state
* @dev: cpuidle device
* @state: Currently selected c-state
*
* If the current state is valid, it is returned back to the caller.
* Else, this function searches for a lower c-state which is still
* valid (as defined in omap3_power_states[]).
*/
static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
struct cpuidle_state *curr)
{
struct cpuidle_state *next = NULL;
struct omap3_processor_cx *cx;
cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr);
/* Check if current state is valid */
if (cx->valid) {
return curr;
} else {
u8 idx = OMAP3_STATE_MAX;
/*
* Reach the current state starting at highest C-state
*/
for (; idx >= OMAP3_STATE_C1; idx--) {
if (&dev->states[idx] == curr) {
next = &dev->states[idx];
break;
}
}
/*
* Should never hit this condition.
*/
WARN_ON(next == NULL);
/*
* Drop to next valid state.
* Start search from the next (lower) state.
*/
idx--;
for (; idx >= OMAP3_STATE_C1; idx--) {
struct omap3_processor_cx *cx;
cx = cpuidle_get_statedata(&dev->states[idx]);
if (cx->valid) {
next = &dev->states[idx];
break;
}
}
/*
* C1 and C2 are always valid.
* So, no need to check for 'next==NULL' outside this loop.
*/
}
return next;
}
/**
* omap3_enter_idle_bm - Checks for any bus activity
* @dev: cpuidle device
* @state: The target state to be programmed
*
* Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This
* function checks for any pending activity and then programs the
* device to the specified or a safer state.
*/
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct cpuidle_state *new_state = next_valid_state(dev, state);
u32 core_next_state, per_next_state = 0, per_saved_state = 0;
u32 cam_state;
struct omap3_processor_cx *cx;
int ret;
if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
BUG_ON(!dev->safe_state);
new_state = dev->safe_state;
goto select_state;
}
cx = cpuidle_get_statedata(state);
core_next_state = cx->core_state;
/*
* FIXME: we currently manage device-specific idle states
* for PER and CORE in combination with CPU-specific
* idle states. This is wrong, and device-specific
* idle managment needs to be separated out into
* its own code.
*/
/*
* Prevent idle completely if CAM is active.
* CAM does not have wakeup capability in OMAP3.
*/
cam_state = pwrdm_read_pwrst(cam_pd);
if (cam_state == PWRDM_POWER_ON) {
new_state = dev->safe_state;
goto select_state;
}
/*
* Prevent PER off if CORE is not in retention or off as this
* would disable PER wakeups completely.
*/
per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
if ((per_next_state == PWRDM_POWER_OFF) &&
(core_next_state > PWRDM_POWER_RET)) {
per_next_state = PWRDM_POWER_RET;
pwrdm_set_next_pwrst(per_pd, per_next_state);
}
/* Are we changing PER target state? */
if (per_next_state != per_saved_state)
pwrdm_set_next_pwrst(per_pd, per_next_state);
select_state:
dev->last_state = new_state;
ret = omap3_enter_idle(dev, new_state);
/* Restore original PER state if it was modified */
if (per_next_state != per_saved_state)
pwrdm_set_next_pwrst(per_pd, per_saved_state);
return ret;
}
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
/**
* omap3_cpuidle_update_states - Update the cpuidle states.
*
* Currently, this function toggles the validity of idle states based upon
* the flag 'enable_off_mode'. When the flag is set all states are valid.
* Else, states leading to OFF state set to be invalid.
*/
void omap3_cpuidle_update_states(void)
{
int i;
for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
struct omap3_processor_cx *cx = &omap3_power_states[i];
if (enable_off_mode) {
cx->valid = 1;
} else {
if ((cx->mpu_state == PWRDM_POWER_OFF) ||
(cx->core_state == PWRDM_POWER_OFF))
cx->valid = 0;
}
}
}
void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
{
int i;
if (!cpuidle_board_params)
return;
for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
cpuidle_params_table[i].valid =
cpuidle_board_params[i].valid;
cpuidle_params_table[i].sleep_latency =
cpuidle_board_params[i].sleep_latency;
cpuidle_params_table[i].wake_latency =
cpuidle_board_params[i].wake_latency;
cpuidle_params_table[i].threshold =
cpuidle_board_params[i].threshold;
}
return;
}
/* omap3_init_power_states - Initialises the OMAP3 specific C states.
*
* Below is the desciption of each C state.
* C1 . MPU WFI + Core active
* C2 . MPU WFI + Core inactive
* C3 . MPU CSWR + Core inactive
* C4 . MPU OFF + Core inactive
* C5 . MPU CSWR + Core CSWR
* C6 . MPU OFF + Core CSWR
* C7 . MPU OFF + Core OFF
*/
void omap_init_power_states(void)
{
/* C1 . MPU WFI + Core active */
omap3_power_states[OMAP3_STATE_C1].valid =
cpuidle_params_table[OMAP3_STATE_C1].valid;
omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
omap3_power_states[OMAP3_STATE_C1].sleep_latency =
cpuidle_params_table[OMAP3_STATE_C1].sleep_latency;
omap3_power_states[OMAP3_STATE_C1].wakeup_latency =
cpuidle_params_table[OMAP3_STATE_C1].wake_latency;
omap3_power_states[OMAP3_STATE_C1].threshold =
cpuidle_params_table[OMAP3_STATE_C1].threshold;
omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
/* C2 . MPU WFI + Core inactive */
omap3_power_states[OMAP3_STATE_C2].valid =
cpuidle_params_table[OMAP3_STATE_C2].valid;
omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
omap3_power_states[OMAP3_STATE_C2].sleep_latency =
cpuidle_params_table[OMAP3_STATE_C2].sleep_latency;
omap3_power_states[OMAP3_STATE_C2].wakeup_latency =
cpuidle_params_table[OMAP3_STATE_C2].wake_latency;
omap3_power_states[OMAP3_STATE_C2].threshold =
cpuidle_params_table[OMAP3_STATE_C2].threshold;
omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C3 . MPU CSWR + Core inactive */
omap3_power_states[OMAP3_STATE_C3].valid =
cpuidle_params_table[OMAP3_STATE_C3].valid;
omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
omap3_power_states[OMAP3_STATE_C3].sleep_latency =
cpuidle_params_table[OMAP3_STATE_C3].sleep_latency;
omap3_power_states[OMAP3_STATE_C3].wakeup_latency =
cpuidle_params_table[OMAP3_STATE_C3].wake_latency;
omap3_power_states[OMAP3_STATE_C3].threshold =
cpuidle_params_table[OMAP3_STATE_C3].threshold;
omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C4 . MPU OFF + Core inactive */
omap3_power_states[OMAP3_STATE_C4].valid =
cpuidle_params_table[OMAP3_STATE_C4].valid;
omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
omap3_power_states[OMAP3_STATE_C4].sleep_latency =
cpuidle_params_table[OMAP3_STATE_C4].sleep_latency;
omap3_power_states[OMAP3_STATE_C4].wakeup_latency =
cpuidle_params_table[OMAP3_STATE_C4].wake_latency;
omap3_power_states[OMAP3_STATE_C4].threshold =
cpuidle_params_table[OMAP3_STATE_C4].threshold;
omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C5 . MPU CSWR + Core CSWR*/
omap3_power_states[OMAP3_STATE_C5].valid =
cpuidle_params_table[OMAP3_STATE_C5].valid;
omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
omap3_power_states[OMAP3_STATE_C5].sleep_latency =
cpuidle_params_table[OMAP3_STATE_C5].sleep_latency;
omap3_power_states[OMAP3_STATE_C5].wakeup_latency =
cpuidle_params_table[OMAP3_STATE_C5].wake_latency;
omap3_power_states[OMAP3_STATE_C5].threshold =
cpuidle_params_table[OMAP3_STATE_C5].threshold;
omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C6 . MPU OFF + Core CSWR */
omap3_power_states[OMAP3_STATE_C6].valid =
cpuidle_params_table[OMAP3_STATE_C6].valid;
omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
omap3_power_states[OMAP3_STATE_C6].sleep_latency =
cpuidle_params_table[OMAP3_STATE_C6].sleep_latency;
omap3_power_states[OMAP3_STATE_C6].wakeup_latency =
cpuidle_params_table[OMAP3_STATE_C6].wake_latency;
omap3_power_states[OMAP3_STATE_C6].threshold =
cpuidle_params_table[OMAP3_STATE_C6].threshold;
omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C7 . MPU OFF + Core OFF */
omap3_power_states[OMAP3_STATE_C7].valid =
cpuidle_params_table[OMAP3_STATE_C7].valid;
omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
omap3_power_states[OMAP3_STATE_C7].sleep_latency =
cpuidle_params_table[OMAP3_STATE_C7].sleep_latency;
omap3_power_states[OMAP3_STATE_C7].wakeup_latency =
cpuidle_params_table[OMAP3_STATE_C7].wake_latency;
omap3_power_states[OMAP3_STATE_C7].threshold =
cpuidle_params_table[OMAP3_STATE_C7].threshold;
omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
}
struct cpuidle_driver omap3_idle_driver = {
.name = "omap3_idle",
.owner = THIS_MODULE,
};
/**
* omap3_idle_init - Init routine for OMAP3 idle
*
* Registers the OMAP3 specific cpuidle driver with the cpuidle
* framework with the valid set of states.
*/
int __init omap3_idle_init(void)
{
int i, count = 0;
struct omap3_processor_cx *cx;
struct cpuidle_state *state;
struct cpuidle_device *dev;
mpu_pd = pwrdm_lookup("mpu_pwrdm");
core_pd = pwrdm_lookup("core_pwrdm");
per_pd = pwrdm_lookup("per_pwrdm");
cam_pd = pwrdm_lookup("cam_pwrdm");
omap_init_power_states();
cpuidle_register_driver(&omap3_idle_driver);
dev = &per_cpu(omap3_idle_dev, smp_processor_id());
for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
cx = &omap3_power_states[i];
state = &dev->states[count];
if (!cx->valid)
continue;
cpuidle_set_statedata(state, cx);
state->exit_latency = cx->sleep_latency + cx->wakeup_latency;
state->target_residency = cx->threshold;
state->flags = cx->flags;
state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ?
omap3_enter_idle_bm : omap3_enter_idle;
if (cx->type == OMAP3_STATE_C1)
dev->safe_state = state;
sprintf(state->name, "C%d", count+1);
count++;
}
if (!count)
return -EINVAL;
dev->state_count = count;
omap3_cpuidle_update_states();
if (cpuidle_register_device(dev)) {
printk(KERN_ERR "%s: CPUidle register device failed\n",
__func__);
return -EIO;
}
return 0;
}
#else
int __init omap3_idle_init(void)
{
return 0;
}
#endif /* CONFIG_CPU_IDLE */
Reference in New Issue View Git Blame Copy Permalink