mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 18:39:03 +07:00
c54c719b55
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
311 lines
7.9 KiB
C
311 lines
7.9 KiB
C
/*
|
|
* IDE tuning and bus mastering support for the CS5510/CS5520
|
|
* chipsets
|
|
*
|
|
* The CS5510/CS5520 are slightly unusual devices. Unlike the
|
|
* typical IDE controllers they do bus mastering with the drive in
|
|
* PIO mode and smarter silicon.
|
|
*
|
|
* The practical upshot of this is that we must always tune the
|
|
* drive for the right PIO mode. We must also ignore all the blacklists
|
|
* and the drive bus mastering DMA information. Also to confuse matters
|
|
* further we can do DMA on PIO only drives.
|
|
*
|
|
* DMA on the 5510 also requires we disable_hlt() during DMA on early
|
|
* revisions.
|
|
*
|
|
* *** This driver is strictly experimental ***
|
|
*
|
|
* (c) Copyright Red Hat Inc 2002
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* Documentation:
|
|
* Not publicly available.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_cs5520"
|
|
#define DRV_VERSION "0.6.6"
|
|
|
|
struct pio_clocks
|
|
{
|
|
int address;
|
|
int assert;
|
|
int recovery;
|
|
};
|
|
|
|
static const struct pio_clocks cs5520_pio_clocks[]={
|
|
{3, 6, 11},
|
|
{2, 5, 6},
|
|
{1, 4, 3},
|
|
{1, 3, 2},
|
|
{1, 2, 1}
|
|
};
|
|
|
|
/**
|
|
* cs5520_set_timings - program PIO timings
|
|
* @ap: ATA port
|
|
* @adev: ATA device
|
|
*
|
|
* Program the PIO mode timings for the controller according to the pio
|
|
* clocking table.
|
|
*/
|
|
|
|
static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int pio)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int slave = adev->devno;
|
|
|
|
pio -= XFER_PIO_0;
|
|
|
|
/* Channel command timing */
|
|
pci_write_config_byte(pdev, 0x62 + ap->port_no,
|
|
(cs5520_pio_clocks[pio].recovery << 4) |
|
|
(cs5520_pio_clocks[pio].assert));
|
|
/* FIXME: should these use address ? */
|
|
/* Read command timing */
|
|
pci_write_config_byte(pdev, 0x64 + 4*ap->port_no + slave,
|
|
(cs5520_pio_clocks[pio].recovery << 4) |
|
|
(cs5520_pio_clocks[pio].assert));
|
|
/* Write command timing */
|
|
pci_write_config_byte(pdev, 0x66 + 4*ap->port_no + slave,
|
|
(cs5520_pio_clocks[pio].recovery << 4) |
|
|
(cs5520_pio_clocks[pio].assert));
|
|
}
|
|
|
|
/**
|
|
* cs5520_set_piomode - program PIO timings
|
|
* @ap: ATA port
|
|
* @adev: ATA device
|
|
*
|
|
* Program the PIO mode timings for the controller according to the pio
|
|
* clocking table.
|
|
*/
|
|
|
|
static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
cs5520_set_timings(ap, adev, adev->pio_mode);
|
|
}
|
|
|
|
static struct scsi_host_template cs5520_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
|
|
};
|
|
|
|
static struct ata_port_operations cs5520_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.qc_prep = ata_bmdma_dumb_qc_prep,
|
|
.cable_detect = ata_cable_40wire,
|
|
.set_piomode = cs5520_set_piomode,
|
|
};
|
|
|
|
static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const unsigned int cmd_port[] = { 0x1F0, 0x170 };
|
|
static const unsigned int ctl_port[] = { 0x3F6, 0x376 };
|
|
struct ata_port_info pi = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.port_ops = &cs5520_port_ops,
|
|
};
|
|
const struct ata_port_info *ppi[2];
|
|
u8 pcicfg;
|
|
void __iomem *iomap[5];
|
|
struct ata_host *host;
|
|
struct ata_ioports *ioaddr;
|
|
int i, rc;
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* IDE port enable bits */
|
|
pci_read_config_byte(pdev, 0x60, &pcicfg);
|
|
|
|
/* Check if the ATA ports are enabled */
|
|
if ((pcicfg & 3) == 0)
|
|
return -ENODEV;
|
|
|
|
ppi[0] = ppi[1] = &ata_dummy_port_info;
|
|
if (pcicfg & 1)
|
|
ppi[0] = π
|
|
if (pcicfg & 2)
|
|
ppi[1] = π
|
|
|
|
if ((pcicfg & 0x40) == 0) {
|
|
dev_warn(&pdev->dev, "DMA mode disabled. Enabling.\n");
|
|
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
|
|
}
|
|
|
|
pi.mwdma_mask = id->driver_data;
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
/* Perform set up for DMA */
|
|
if (pci_enable_device_io(pdev)) {
|
|
printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
|
|
printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
|
|
return -ENODEV;
|
|
}
|
|
if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
|
|
printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Map IO ports and initialize host accordingly */
|
|
iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8);
|
|
iomap[1] = devm_ioport_map(&pdev->dev, ctl_port[0], 1);
|
|
iomap[2] = devm_ioport_map(&pdev->dev, cmd_port[1], 8);
|
|
iomap[3] = devm_ioport_map(&pdev->dev, ctl_port[1], 1);
|
|
iomap[4] = pcim_iomap(pdev, 2, 0);
|
|
|
|
if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
|
|
return -ENOMEM;
|
|
|
|
ioaddr = &host->ports[0]->ioaddr;
|
|
ioaddr->cmd_addr = iomap[0];
|
|
ioaddr->ctl_addr = iomap[1];
|
|
ioaddr->altstatus_addr = iomap[1];
|
|
ioaddr->bmdma_addr = iomap[4];
|
|
ata_sff_std_ports(ioaddr);
|
|
|
|
ata_port_desc(host->ports[0],
|
|
"cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]);
|
|
ata_port_pbar_desc(host->ports[0], 4, 0, "bmdma");
|
|
|
|
ioaddr = &host->ports[1]->ioaddr;
|
|
ioaddr->cmd_addr = iomap[2];
|
|
ioaddr->ctl_addr = iomap[3];
|
|
ioaddr->altstatus_addr = iomap[3];
|
|
ioaddr->bmdma_addr = iomap[4] + 8;
|
|
ata_sff_std_ports(ioaddr);
|
|
|
|
ata_port_desc(host->ports[1],
|
|
"cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]);
|
|
ata_port_pbar_desc(host->ports[1], 4, 8, "bmdma");
|
|
|
|
/* activate the host */
|
|
pci_set_master(pdev);
|
|
rc = ata_host_start(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
static const int irq[] = { 14, 15 };
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (ata_port_is_dummy(ap))
|
|
continue;
|
|
|
|
rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
|
|
ata_bmdma_interrupt, 0, DRV_NAME, host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ata_port_desc(ap, "irq %d", irq[i]);
|
|
}
|
|
|
|
return ata_host_register(host, &cs5520_sht);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/**
|
|
* cs5520_reinit_one - device resume
|
|
* @pdev: PCI device
|
|
*
|
|
* Do any reconfiguration work needed by a resume from RAM. We need
|
|
* to restore DMA mode support on BIOSen which disabled it
|
|
*/
|
|
|
|
static int cs5520_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
u8 pcicfg;
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pci_read_config_byte(pdev, 0x60, &pcicfg);
|
|
if ((pcicfg & 0x40) == 0)
|
|
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
|
|
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cs5520_pci_device_suspend - device suspend
|
|
* @pdev: PCI device
|
|
*
|
|
* We have to cut and waste bits from the standard method because
|
|
* the 5520 is a bit odd and not just a pure ATA device. As a result
|
|
* we must not disable it. The needed code is short and this avoids
|
|
* chip specific mess in the core code.
|
|
*/
|
|
|
|
static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int rc = 0;
|
|
|
|
rc = ata_host_suspend(host, mesg);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pci_save_state(pdev);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
/* For now keep DMA off. We can set it for all but A rev CS5510 once the
|
|
core ATA code can handle it */
|
|
|
|
static const struct pci_device_id pata_cs5520[] = {
|
|
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
|
|
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cs5520_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pata_cs5520,
|
|
.probe = cs5520_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = cs5520_pci_device_suspend,
|
|
.resume = cs5520_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(cs5520_pci_driver);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for Cyrix CS5510/5520");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pata_cs5520);
|
|
MODULE_VERSION(DRV_VERSION);
|