mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 14:33:30 +07:00
ecf20d28ff
This demod implements an i2c adapter for attached tuner and relays i2c messages from users (dvb adapters / bridge chips). Some of them, such as Friio dvb card using gl861, require each pair of i2c messages for one read to be issued as two separate transactions. This patch adds a configuration option to enable this split. Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
854 lines
20 KiB
C
854 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Toshiba TC90522 Demodulator
|
|
*
|
|
* Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com>
|
|
*/
|
|
|
|
/*
|
|
* NOTICE:
|
|
* This driver is incomplete and lacks init/config of the chips,
|
|
* as the necessary info is not disclosed.
|
|
* It assumes that users of this driver (such as a PCI bridge of
|
|
* DTV receiver cards) properly init and configure the chip
|
|
* via I2C *before* calling this driver's init() function.
|
|
*
|
|
* Currently, PT3 driver is the only one that uses this driver,
|
|
* and contains init/config code in its firmware.
|
|
* Thus some part of the code might be dependent on PT3 specific config.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/dvb/frontend.h>
|
|
#include <media/dvb_math.h>
|
|
#include "tc90522.h"
|
|
|
|
#define TC90522_I2C_THRU_REG 0xfe
|
|
|
|
#define TC90522_MODULE_IDX(addr) (((u8)(addr) & 0x02U) >> 1)
|
|
|
|
struct tc90522_state {
|
|
struct tc90522_config cfg;
|
|
struct dvb_frontend fe;
|
|
struct i2c_client *i2c_client;
|
|
struct i2c_adapter tuner_i2c;
|
|
|
|
bool lna;
|
|
};
|
|
|
|
struct reg_val {
|
|
u8 reg;
|
|
u8 val;
|
|
};
|
|
|
|
static int
|
|
reg_write(struct tc90522_state *state, const struct reg_val *regs, int num)
|
|
{
|
|
int i, ret;
|
|
struct i2c_msg msg;
|
|
|
|
ret = 0;
|
|
msg.addr = state->i2c_client->addr;
|
|
msg.flags = 0;
|
|
msg.len = 2;
|
|
for (i = 0; i < num; i++) {
|
|
msg.buf = (u8 *)®s[i];
|
|
ret = i2c_transfer(state->i2c_client->adapter, &msg, 1);
|
|
if (ret == 0)
|
|
ret = -EIO;
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int reg_read(struct tc90522_state *state, u8 reg, u8 *val, u8 len)
|
|
{
|
|
struct i2c_msg msgs[2] = {
|
|
{
|
|
.addr = state->i2c_client->addr,
|
|
.flags = 0,
|
|
.buf = ®,
|
|
.len = 1,
|
|
},
|
|
{
|
|
.addr = state->i2c_client->addr,
|
|
.flags = I2C_M_RD,
|
|
.buf = val,
|
|
.len = len,
|
|
},
|
|
};
|
|
int ret;
|
|
|
|
ret = i2c_transfer(state->i2c_client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret == ARRAY_SIZE(msgs))
|
|
ret = 0;
|
|
else if (ret >= 0)
|
|
ret = -EIO;
|
|
return ret;
|
|
}
|
|
|
|
static struct tc90522_state *cfg_to_state(struct tc90522_config *c)
|
|
{
|
|
return container_of(c, struct tc90522_state, cfg);
|
|
}
|
|
|
|
|
|
static int tc90522s_set_tsid(struct dvb_frontend *fe)
|
|
{
|
|
struct reg_val set_tsid[] = {
|
|
{ 0x8f, 00 },
|
|
{ 0x90, 00 }
|
|
};
|
|
|
|
set_tsid[0].val = (fe->dtv_property_cache.stream_id & 0xff00) >> 8;
|
|
set_tsid[1].val = fe->dtv_property_cache.stream_id & 0xff;
|
|
return reg_write(fe->demodulator_priv, set_tsid, ARRAY_SIZE(set_tsid));
|
|
}
|
|
|
|
static int tc90522t_set_layers(struct dvb_frontend *fe)
|
|
{
|
|
struct reg_val rv;
|
|
u8 laysel;
|
|
|
|
laysel = ~fe->dtv_property_cache.isdbt_layer_enabled & 0x07;
|
|
laysel = (laysel & 0x01) << 2 | (laysel & 0x02) | (laysel & 0x04) >> 2;
|
|
rv.reg = 0x71;
|
|
rv.val = laysel;
|
|
return reg_write(fe->demodulator_priv, &rv, 1);
|
|
}
|
|
|
|
/* frontend ops */
|
|
|
|
static int tc90522s_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct tc90522_state *state;
|
|
int ret;
|
|
u8 reg;
|
|
|
|
state = fe->demodulator_priv;
|
|
ret = reg_read(state, 0xc3, ®, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*status = 0;
|
|
if (reg & 0x80) /* input level under min ? */
|
|
return 0;
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
if (reg & 0x60) /* carrier? */
|
|
return 0;
|
|
*status |= FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC;
|
|
|
|
if (reg & 0x10)
|
|
return 0;
|
|
if (reg_read(state, 0xc5, ®, 1) < 0 || !(reg & 0x03))
|
|
return 0;
|
|
*status |= FE_HAS_LOCK;
|
|
return 0;
|
|
}
|
|
|
|
static int tc90522t_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct tc90522_state *state;
|
|
int ret;
|
|
u8 reg;
|
|
|
|
state = fe->demodulator_priv;
|
|
ret = reg_read(state, 0x96, ®, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*status = 0;
|
|
if (reg & 0xe0) {
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI
|
|
| FE_HAS_SYNC | FE_HAS_LOCK;
|
|
return 0;
|
|
}
|
|
|
|
ret = reg_read(state, 0x80, ®, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (reg & 0xf0)
|
|
return 0;
|
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
|
|
|
|
if (reg & 0x0c)
|
|
return 0;
|
|
*status |= FE_HAS_SYNC | FE_HAS_VITERBI;
|
|
|
|
if (reg & 0x02)
|
|
return 0;
|
|
*status |= FE_HAS_LOCK;
|
|
return 0;
|
|
}
|
|
|
|
static const enum fe_code_rate fec_conv_sat[] = {
|
|
FEC_NONE, /* unused */
|
|
FEC_1_2, /* for BPSK */
|
|
FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_7_8, /* for QPSK */
|
|
FEC_2_3, /* for 8PSK. (trellis code) */
|
|
};
|
|
|
|
static int tc90522s_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *c)
|
|
{
|
|
struct tc90522_state *state;
|
|
struct dtv_fe_stats *stats;
|
|
int ret, i;
|
|
int layers;
|
|
u8 val[10];
|
|
u32 cndat;
|
|
|
|
state = fe->demodulator_priv;
|
|
c->delivery_system = SYS_ISDBS;
|
|
c->symbol_rate = 28860000;
|
|
|
|
layers = 0;
|
|
ret = reg_read(state, 0xe6, val, 5);
|
|
if (ret == 0) {
|
|
u8 v;
|
|
|
|
c->stream_id = val[0] << 8 | val[1];
|
|
|
|
/* high/single layer */
|
|
v = (val[2] & 0x70) >> 4;
|
|
c->modulation = (v == 7) ? PSK_8 : QPSK;
|
|
c->fec_inner = fec_conv_sat[v];
|
|
c->layer[0].fec = c->fec_inner;
|
|
c->layer[0].modulation = c->modulation;
|
|
c->layer[0].segment_count = val[3] & 0x3f; /* slots */
|
|
|
|
/* low layer */
|
|
v = (val[2] & 0x07);
|
|
c->layer[1].fec = fec_conv_sat[v];
|
|
if (v == 0) /* no low layer */
|
|
c->layer[1].segment_count = 0;
|
|
else
|
|
c->layer[1].segment_count = val[4] & 0x3f; /* slots */
|
|
/*
|
|
* actually, BPSK if v==1, but not defined in
|
|
* enum fe_modulation
|
|
*/
|
|
c->layer[1].modulation = QPSK;
|
|
layers = (v > 0) ? 2 : 1;
|
|
}
|
|
|
|
/* statistics */
|
|
|
|
stats = &c->strength;
|
|
stats->len = 0;
|
|
/* let the connected tuner set RSSI property cache */
|
|
if (fe->ops.tuner_ops.get_rf_strength) {
|
|
u16 dummy;
|
|
|
|
fe->ops.tuner_ops.get_rf_strength(fe, &dummy);
|
|
}
|
|
|
|
stats = &c->cnr;
|
|
stats->len = 1;
|
|
stats->stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
cndat = 0;
|
|
ret = reg_read(state, 0xbc, val, 2);
|
|
if (ret == 0)
|
|
cndat = val[0] << 8 | val[1];
|
|
if (cndat >= 3000) {
|
|
u32 p, p4;
|
|
s64 cn;
|
|
|
|
cndat -= 3000; /* cndat: 4.12 fixed point float */
|
|
/*
|
|
* cnr[mdB] = -1634.6 * P^5 + 14341 * P^4 - 50259 * P^3
|
|
* + 88977 * P^2 - 89565 * P + 58857
|
|
* (P = sqrt(cndat) / 64)
|
|
*/
|
|
/* p := sqrt(cndat) << 8 = P << 14, 2.14 fixed point float */
|
|
/* cn = cnr << 3 */
|
|
p = int_sqrt(cndat << 16);
|
|
p4 = cndat * cndat;
|
|
cn = div64_s64(-16346LL * p4 * p, 10) >> 35;
|
|
cn += (14341LL * p4) >> 21;
|
|
cn -= (50259LL * cndat * p) >> 23;
|
|
cn += (88977LL * cndat) >> 9;
|
|
cn -= (89565LL * p) >> 11;
|
|
cn += 58857 << 3;
|
|
stats->stat[0].svalue = cn >> 3;
|
|
stats->stat[0].scale = FE_SCALE_DECIBEL;
|
|
}
|
|
|
|
/* per-layer post viterbi BER (or PER? config dependent?) */
|
|
stats = &c->post_bit_error;
|
|
memset(stats, 0, sizeof(*stats));
|
|
stats->len = layers;
|
|
ret = reg_read(state, 0xeb, val, 10);
|
|
if (ret < 0)
|
|
for (i = 0; i < layers; i++)
|
|
stats->stat[i].scale = FE_SCALE_NOT_AVAILABLE;
|
|
else {
|
|
for (i = 0; i < layers; i++) {
|
|
stats->stat[i].scale = FE_SCALE_COUNTER;
|
|
stats->stat[i].uvalue = val[i * 5] << 16
|
|
| val[i * 5 + 1] << 8 | val[i * 5 + 2];
|
|
}
|
|
}
|
|
stats = &c->post_bit_count;
|
|
memset(stats, 0, sizeof(*stats));
|
|
stats->len = layers;
|
|
if (ret < 0)
|
|
for (i = 0; i < layers; i++)
|
|
stats->stat[i].scale = FE_SCALE_NOT_AVAILABLE;
|
|
else {
|
|
for (i = 0; i < layers; i++) {
|
|
stats->stat[i].scale = FE_SCALE_COUNTER;
|
|
stats->stat[i].uvalue =
|
|
val[i * 5 + 3] << 8 | val[i * 5 + 4];
|
|
stats->stat[i].uvalue *= 204 * 8;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const enum fe_transmit_mode tm_conv[] = {
|
|
TRANSMISSION_MODE_2K,
|
|
TRANSMISSION_MODE_4K,
|
|
TRANSMISSION_MODE_8K,
|
|
0
|
|
};
|
|
|
|
static const enum fe_code_rate fec_conv_ter[] = {
|
|
FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_7_8, 0, 0, 0
|
|
};
|
|
|
|
static const enum fe_modulation mod_conv[] = {
|
|
DQPSK, QPSK, QAM_16, QAM_64, 0, 0, 0, 0
|
|
};
|
|
|
|
static int tc90522t_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *c)
|
|
{
|
|
struct tc90522_state *state;
|
|
struct dtv_fe_stats *stats;
|
|
int ret, i;
|
|
int layers;
|
|
u8 val[15], mode;
|
|
u32 cndat;
|
|
|
|
state = fe->demodulator_priv;
|
|
c->delivery_system = SYS_ISDBT;
|
|
c->bandwidth_hz = 6000000;
|
|
mode = 1;
|
|
ret = reg_read(state, 0xb0, val, 1);
|
|
if (ret == 0) {
|
|
mode = (val[0] & 0xc0) >> 6;
|
|
c->transmission_mode = tm_conv[mode];
|
|
c->guard_interval = (val[0] & 0x30) >> 4;
|
|
}
|
|
|
|
ret = reg_read(state, 0xb2, val, 6);
|
|
layers = 0;
|
|
if (ret == 0) {
|
|
u8 v;
|
|
|
|
c->isdbt_partial_reception = val[0] & 0x01;
|
|
c->isdbt_sb_mode = (val[0] & 0xc0) == 0x40;
|
|
|
|
/* layer A */
|
|
v = (val[2] & 0x78) >> 3;
|
|
if (v == 0x0f)
|
|
c->layer[0].segment_count = 0;
|
|
else {
|
|
layers++;
|
|
c->layer[0].segment_count = v;
|
|
c->layer[0].fec = fec_conv_ter[(val[1] & 0x1c) >> 2];
|
|
c->layer[0].modulation = mod_conv[(val[1] & 0xe0) >> 5];
|
|
v = (val[1] & 0x03) << 1 | (val[2] & 0x80) >> 7;
|
|
c->layer[0].interleaving = v;
|
|
}
|
|
|
|
/* layer B */
|
|
v = (val[3] & 0x03) << 2 | (val[4] & 0xc0) >> 6;
|
|
if (v == 0x0f)
|
|
c->layer[1].segment_count = 0;
|
|
else {
|
|
layers++;
|
|
c->layer[1].segment_count = v;
|
|
c->layer[1].fec = fec_conv_ter[(val[3] & 0xe0) >> 5];
|
|
c->layer[1].modulation = mod_conv[(val[2] & 0x07)];
|
|
c->layer[1].interleaving = (val[3] & 0x1c) >> 2;
|
|
}
|
|
|
|
/* layer C */
|
|
v = (val[5] & 0x1e) >> 1;
|
|
if (v == 0x0f)
|
|
c->layer[2].segment_count = 0;
|
|
else {
|
|
layers++;
|
|
c->layer[2].segment_count = v;
|
|
c->layer[2].fec = fec_conv_ter[(val[4] & 0x07)];
|
|
c->layer[2].modulation = mod_conv[(val[4] & 0x38) >> 3];
|
|
c->layer[2].interleaving = (val[5] & 0xe0) >> 5;
|
|
}
|
|
}
|
|
|
|
/* statistics */
|
|
|
|
stats = &c->strength;
|
|
stats->len = 0;
|
|
/* let the connected tuner set RSSI property cache */
|
|
if (fe->ops.tuner_ops.get_rf_strength) {
|
|
u16 dummy;
|
|
|
|
fe->ops.tuner_ops.get_rf_strength(fe, &dummy);
|
|
}
|
|
|
|
stats = &c->cnr;
|
|
stats->len = 1;
|
|
stats->stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
cndat = 0;
|
|
ret = reg_read(state, 0x8b, val, 3);
|
|
if (ret == 0)
|
|
cndat = val[0] << 16 | val[1] << 8 | val[2];
|
|
if (cndat != 0) {
|
|
u32 p, tmp;
|
|
s64 cn;
|
|
|
|
/*
|
|
* cnr[mdB] = 0.024 P^4 - 1.6 P^3 + 39.8 P^2 + 549.1 P + 3096.5
|
|
* (P = 10log10(5505024/cndat))
|
|
*/
|
|
/* cn = cnr << 3 (61.3 fixed point float */
|
|
/* p = 10log10(5505024/cndat) << 24 (8.24 fixed point float)*/
|
|
p = intlog10(5505024) - intlog10(cndat);
|
|
p *= 10;
|
|
|
|
cn = 24772;
|
|
cn += div64_s64(43827LL * p, 10) >> 24;
|
|
tmp = p >> 8;
|
|
cn += div64_s64(3184LL * tmp * tmp, 10) >> 32;
|
|
tmp = p >> 13;
|
|
cn -= div64_s64(128LL * tmp * tmp * tmp, 10) >> 33;
|
|
tmp = p >> 18;
|
|
cn += div64_s64(192LL * tmp * tmp * tmp * tmp, 1000) >> 24;
|
|
|
|
stats->stat[0].svalue = cn >> 3;
|
|
stats->stat[0].scale = FE_SCALE_DECIBEL;
|
|
}
|
|
|
|
/* per-layer post viterbi BER (or PER? config dependent?) */
|
|
stats = &c->post_bit_error;
|
|
memset(stats, 0, sizeof(*stats));
|
|
stats->len = layers;
|
|
ret = reg_read(state, 0x9d, val, 15);
|
|
if (ret < 0)
|
|
for (i = 0; i < layers; i++)
|
|
stats->stat[i].scale = FE_SCALE_NOT_AVAILABLE;
|
|
else {
|
|
for (i = 0; i < layers; i++) {
|
|
stats->stat[i].scale = FE_SCALE_COUNTER;
|
|
stats->stat[i].uvalue = val[i * 3] << 16
|
|
| val[i * 3 + 1] << 8 | val[i * 3 + 2];
|
|
}
|
|
}
|
|
stats = &c->post_bit_count;
|
|
memset(stats, 0, sizeof(*stats));
|
|
stats->len = layers;
|
|
if (ret < 0)
|
|
for (i = 0; i < layers; i++)
|
|
stats->stat[i].scale = FE_SCALE_NOT_AVAILABLE;
|
|
else {
|
|
for (i = 0; i < layers; i++) {
|
|
stats->stat[i].scale = FE_SCALE_COUNTER;
|
|
stats->stat[i].uvalue =
|
|
val[9 + i * 2] << 8 | val[9 + i * 2 + 1];
|
|
stats->stat[i].uvalue *= 204 * 8;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct reg_val reset_sat = { 0x03, 0x01 };
|
|
static const struct reg_val reset_ter = { 0x01, 0x40 };
|
|
|
|
static int tc90522_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct tc90522_state *state;
|
|
int ret;
|
|
|
|
state = fe->demodulator_priv;
|
|
|
|
if (fe->ops.tuner_ops.set_params)
|
|
ret = fe->ops.tuner_ops.set_params(fe);
|
|
else
|
|
ret = -ENODEV;
|
|
if (ret < 0)
|
|
goto failed;
|
|
|
|
if (fe->ops.delsys[0] == SYS_ISDBS) {
|
|
ret = tc90522s_set_tsid(fe);
|
|
if (ret < 0)
|
|
goto failed;
|
|
ret = reg_write(state, &reset_sat, 1);
|
|
} else {
|
|
ret = tc90522t_set_layers(fe);
|
|
if (ret < 0)
|
|
goto failed;
|
|
ret = reg_write(state, &reset_ter, 1);
|
|
}
|
|
if (ret < 0)
|
|
goto failed;
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
dev_warn(&state->tuner_i2c.dev, "(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
|
|
static int tc90522_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *settings)
|
|
{
|
|
if (fe->ops.delsys[0] == SYS_ISDBS) {
|
|
settings->min_delay_ms = 250;
|
|
settings->step_size = 1000;
|
|
settings->max_drift = settings->step_size * 2;
|
|
} else {
|
|
settings->min_delay_ms = 400;
|
|
settings->step_size = 142857;
|
|
settings->max_drift = settings->step_size;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tc90522_set_if_agc(struct dvb_frontend *fe, bool on)
|
|
{
|
|
struct reg_val agc_sat[] = {
|
|
{ 0x0a, 0x00 },
|
|
{ 0x10, 0x30 },
|
|
{ 0x11, 0x00 },
|
|
{ 0x03, 0x01 },
|
|
};
|
|
struct reg_val agc_ter[] = {
|
|
{ 0x25, 0x00 },
|
|
{ 0x23, 0x4c },
|
|
{ 0x01, 0x40 },
|
|
};
|
|
struct tc90522_state *state;
|
|
struct reg_val *rv;
|
|
int num;
|
|
|
|
state = fe->demodulator_priv;
|
|
if (fe->ops.delsys[0] == SYS_ISDBS) {
|
|
agc_sat[0].val = on ? 0xff : 0x00;
|
|
agc_sat[1].val |= 0x80;
|
|
agc_sat[1].val |= on ? 0x01 : 0x00;
|
|
agc_sat[2].val |= on ? 0x40 : 0x00;
|
|
rv = agc_sat;
|
|
num = ARRAY_SIZE(agc_sat);
|
|
} else {
|
|
agc_ter[0].val = on ? 0x40 : 0x00;
|
|
agc_ter[1].val |= on ? 0x00 : 0x01;
|
|
rv = agc_ter;
|
|
num = ARRAY_SIZE(agc_ter);
|
|
}
|
|
return reg_write(state, rv, num);
|
|
}
|
|
|
|
static const struct reg_val sleep_sat = { 0x17, 0x01 };
|
|
static const struct reg_val sleep_ter = { 0x03, 0x90 };
|
|
|
|
static int tc90522_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct tc90522_state *state;
|
|
int ret;
|
|
|
|
state = fe->demodulator_priv;
|
|
if (fe->ops.delsys[0] == SYS_ISDBS)
|
|
ret = reg_write(state, &sleep_sat, 1);
|
|
else {
|
|
ret = reg_write(state, &sleep_ter, 1);
|
|
if (ret == 0 && fe->ops.set_lna &&
|
|
fe->dtv_property_cache.lna == LNA_AUTO) {
|
|
fe->dtv_property_cache.lna = 0;
|
|
ret = fe->ops.set_lna(fe);
|
|
fe->dtv_property_cache.lna = LNA_AUTO;
|
|
}
|
|
}
|
|
if (ret < 0)
|
|
dev_warn(&state->tuner_i2c.dev,
|
|
"(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
|
|
static const struct reg_val wakeup_sat = { 0x17, 0x00 };
|
|
static const struct reg_val wakeup_ter = { 0x03, 0x80 };
|
|
|
|
static int tc90522_init(struct dvb_frontend *fe)
|
|
{
|
|
struct tc90522_state *state;
|
|
int ret;
|
|
|
|
/*
|
|
* Because the init sequence is not public,
|
|
* the parent device/driver should have init'ed the device before.
|
|
* just wake up the device here.
|
|
*/
|
|
|
|
state = fe->demodulator_priv;
|
|
if (fe->ops.delsys[0] == SYS_ISDBS)
|
|
ret = reg_write(state, &wakeup_sat, 1);
|
|
else {
|
|
ret = reg_write(state, &wakeup_ter, 1);
|
|
if (ret == 0 && fe->ops.set_lna &&
|
|
fe->dtv_property_cache.lna == LNA_AUTO) {
|
|
fe->dtv_property_cache.lna = 1;
|
|
ret = fe->ops.set_lna(fe);
|
|
fe->dtv_property_cache.lna = LNA_AUTO;
|
|
}
|
|
}
|
|
if (ret < 0) {
|
|
dev_warn(&state->tuner_i2c.dev,
|
|
"(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
|
|
/* prefer 'all-layers' to 'none' as a default */
|
|
if (fe->dtv_property_cache.isdbt_layer_enabled == 0)
|
|
fe->dtv_property_cache.isdbt_layer_enabled = 7;
|
|
return tc90522_set_if_agc(fe, true);
|
|
}
|
|
|
|
|
|
/*
|
|
* tuner I2C adapter functions
|
|
*/
|
|
|
|
static int
|
|
tc90522_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct tc90522_state *state;
|
|
struct i2c_msg *new_msgs;
|
|
int i, j;
|
|
int ret, rd_num;
|
|
u8 wbuf[256];
|
|
u8 *p, *bufend;
|
|
|
|
if (num <= 0)
|
|
return -EINVAL;
|
|
|
|
rd_num = 0;
|
|
for (i = 0; i < num; i++)
|
|
if (msgs[i].flags & I2C_M_RD)
|
|
rd_num++;
|
|
new_msgs = kmalloc_array(num + rd_num, sizeof(*new_msgs), GFP_KERNEL);
|
|
if (!new_msgs)
|
|
return -ENOMEM;
|
|
|
|
state = i2c_get_adapdata(adap);
|
|
p = wbuf;
|
|
bufend = wbuf + sizeof(wbuf);
|
|
for (i = 0, j = 0; i < num; i++, j++) {
|
|
new_msgs[j].addr = state->i2c_client->addr;
|
|
new_msgs[j].flags = msgs[i].flags;
|
|
|
|
if (msgs[i].flags & I2C_M_RD) {
|
|
new_msgs[j].flags &= ~I2C_M_RD;
|
|
if (p + 2 > bufend)
|
|
break;
|
|
p[0] = TC90522_I2C_THRU_REG;
|
|
p[1] = msgs[i].addr << 1 | 0x01;
|
|
new_msgs[j].buf = p;
|
|
new_msgs[j].len = 2;
|
|
p += 2;
|
|
j++;
|
|
new_msgs[j].addr = state->i2c_client->addr;
|
|
new_msgs[j].flags = msgs[i].flags;
|
|
new_msgs[j].buf = msgs[i].buf;
|
|
new_msgs[j].len = msgs[i].len;
|
|
continue;
|
|
}
|
|
|
|
if (p + msgs[i].len + 2 > bufend)
|
|
break;
|
|
p[0] = TC90522_I2C_THRU_REG;
|
|
p[1] = msgs[i].addr << 1;
|
|
memcpy(p + 2, msgs[i].buf, msgs[i].len);
|
|
new_msgs[j].buf = p;
|
|
new_msgs[j].len = msgs[i].len + 2;
|
|
p += new_msgs[j].len;
|
|
}
|
|
|
|
if (i < num) {
|
|
ret = -ENOMEM;
|
|
} else if (!state->cfg.split_tuner_read_i2c || rd_num == 0) {
|
|
ret = i2c_transfer(state->i2c_client->adapter, new_msgs, j);
|
|
} else {
|
|
/*
|
|
* Split transactions at each I2C_M_RD message.
|
|
* Some of the parent device require this,
|
|
* such as Friio (see. dvb-usb-gl861).
|
|
*/
|
|
int from, to;
|
|
|
|
ret = 0;
|
|
from = 0;
|
|
do {
|
|
int r;
|
|
|
|
to = from + 1;
|
|
while (to < j && !(new_msgs[to].flags & I2C_M_RD))
|
|
to++;
|
|
r = i2c_transfer(state->i2c_client->adapter,
|
|
&new_msgs[from], to - from);
|
|
ret = (r <= 0) ? r : ret + r;
|
|
from = to;
|
|
} while (from < j && ret > 0);
|
|
}
|
|
|
|
if (ret >= 0 && ret < j)
|
|
ret = -EIO;
|
|
kfree(new_msgs);
|
|
return (ret == j) ? num : ret;
|
|
}
|
|
|
|
static u32 tc90522_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
static const struct i2c_algorithm tc90522_tuner_i2c_algo = {
|
|
.master_xfer = &tc90522_master_xfer,
|
|
.functionality = &tc90522_functionality,
|
|
};
|
|
|
|
|
|
/*
|
|
* I2C driver functions
|
|
*/
|
|
|
|
static const struct dvb_frontend_ops tc90522_ops_sat = {
|
|
.delsys = { SYS_ISDBS },
|
|
.info = {
|
|
.name = "Toshiba TC90522 ISDB-S module",
|
|
.frequency_min_hz = 950 * MHz,
|
|
.frequency_max_hz = 2150 * MHz,
|
|
.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
|
|
},
|
|
|
|
.init = tc90522_init,
|
|
.sleep = tc90522_sleep,
|
|
.set_frontend = tc90522_set_frontend,
|
|
.get_tune_settings = tc90522_get_tune_settings,
|
|
|
|
.get_frontend = tc90522s_get_frontend,
|
|
.read_status = tc90522s_read_status,
|
|
};
|
|
|
|
static const struct dvb_frontend_ops tc90522_ops_ter = {
|
|
.delsys = { SYS_ISDBT },
|
|
.info = {
|
|
.name = "Toshiba TC90522 ISDB-T module",
|
|
.frequency_min_hz = 470 * MHz,
|
|
.frequency_max_hz = 770 * MHz,
|
|
.frequency_stepsize_hz = 142857,
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
|
|
FE_CAN_HIERARCHY_AUTO,
|
|
},
|
|
|
|
.init = tc90522_init,
|
|
.sleep = tc90522_sleep,
|
|
.set_frontend = tc90522_set_frontend,
|
|
.get_tune_settings = tc90522_get_tune_settings,
|
|
|
|
.get_frontend = tc90522t_get_frontend,
|
|
.read_status = tc90522t_read_status,
|
|
};
|
|
|
|
|
|
static int tc90522_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct tc90522_state *state;
|
|
struct tc90522_config *cfg;
|
|
const struct dvb_frontend_ops *ops;
|
|
struct i2c_adapter *adap;
|
|
int ret;
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
state->i2c_client = client;
|
|
|
|
cfg = client->dev.platform_data;
|
|
memcpy(&state->cfg, cfg, sizeof(state->cfg));
|
|
cfg->fe = state->cfg.fe = &state->fe;
|
|
ops = id->driver_data == 0 ? &tc90522_ops_sat : &tc90522_ops_ter;
|
|
memcpy(&state->fe.ops, ops, sizeof(*ops));
|
|
state->fe.demodulator_priv = state;
|
|
|
|
adap = &state->tuner_i2c;
|
|
adap->owner = THIS_MODULE;
|
|
adap->algo = &tc90522_tuner_i2c_algo;
|
|
adap->dev.parent = &client->dev;
|
|
strscpy(adap->name, "tc90522_sub", sizeof(adap->name));
|
|
i2c_set_adapdata(adap, state);
|
|
ret = i2c_add_adapter(adap);
|
|
if (ret < 0)
|
|
goto free_state;
|
|
cfg->tuner_i2c = state->cfg.tuner_i2c = adap;
|
|
|
|
i2c_set_clientdata(client, &state->cfg);
|
|
dev_info(&client->dev, "Toshiba TC90522 attached.\n");
|
|
return 0;
|
|
free_state:
|
|
kfree(state);
|
|
return ret;
|
|
}
|
|
|
|
static int tc90522_remove(struct i2c_client *client)
|
|
{
|
|
struct tc90522_state *state;
|
|
|
|
state = cfg_to_state(i2c_get_clientdata(client));
|
|
i2c_del_adapter(&state->tuner_i2c);
|
|
kfree(state);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct i2c_device_id tc90522_id[] = {
|
|
{ TC90522_I2C_DEV_SAT, 0 },
|
|
{ TC90522_I2C_DEV_TER, 1 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tc90522_id);
|
|
|
|
static struct i2c_driver tc90522_driver = {
|
|
.driver = {
|
|
.name = "tc90522",
|
|
},
|
|
.probe = tc90522_probe,
|
|
.remove = tc90522_remove,
|
|
.id_table = tc90522_id,
|
|
};
|
|
|
|
module_i2c_driver(tc90522_driver);
|
|
|
|
MODULE_DESCRIPTION("Toshiba TC90522 frontend");
|
|
MODULE_AUTHOR("Akihiro TSUKADA");
|
|
MODULE_LICENSE("GPL");
|