mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-04 07:36:46 +07:00
6b5a12dbca
This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIUAwUAVqAGcmCrR//JCVInAQLDog/4x9F0PHGmZhexGfFOpi2Od63Jjx55izRU zRXqRjjFjambOrZuOx8lEGDy/qzqKbsDU8D1P4IUugkDr2bLSXv+NTLZL1kNBIdm YOlJhw/BmzLYqauOHmBzGhtv1FDUk3rqbgTsP5tTWj5LpSkwjmqui3HBZpi+f3Rr YOn+NeQSARiw+51D0b106a9RFshQXRGgn5m3xFjLWhJqshb2z2Ew5cogX/zdwrrM ss1BFomxsvgk6S+snN6v7cEX2iXe3r89qNR5jEW5BgNpQGFsAUeXPr9zzH07L/Qq O7XLw9jt5MX/X5372zVHPb57WoflLbF9cFaaDUZV3eTqt3lC67BTxOtYIdC2i90k E5GYlsy88CRwT2EO+ok/6UTryph+hVv7JqHfbKfnISrbraMCK36DtDTpBIpZ9uYF rRB7ncJZUWBcyoe+qvitSl+2KV54iB1ez2RXsketxM98dDZsfB2M2ImFou1F/Pgg ALvpifPubi/uDe7xNUsSuaT6/3jAomBuNsxnkYJ3NeiH/+duZbOYGkzK/LlcjZyc UrA0IpLfwIFsBNzwfpZPZ1lkEu8Y1YZZ+Hv9k65q1wMuBDgrFI5zUeYrPZi4pN9T Yo1xP9FstVLDouJrpGZo12VIIxR1UBeGqfRI/BZ58LEF3PRq/g2OVFsdQia5gZKr ddiJKSL1Vw== =z1AW -----END PGP SIGNATURE----- Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
635 lines
15 KiB
C
635 lines
15 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-ams-delta.c
|
|
*
|
|
* Modified from board-generic.c
|
|
*
|
|
* Board specific inits for the Amstrad E3 (codename Delta) videophone
|
|
*
|
|
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/export.h>
|
|
#include <linux/omapfb.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_data/gpio-omap.h>
|
|
|
|
#include <media/soc_camera.h>
|
|
|
|
#include <asm/serial.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/board-ams-delta.h>
|
|
#include <linux/platform_data/keypad-omap.h>
|
|
#include <mach/mux.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/ams-delta-fiq.h>
|
|
#include "camera.h"
|
|
#include <mach/usb.h>
|
|
|
|
#include "iomap.h"
|
|
#include "common.h"
|
|
|
|
static const unsigned int ams_delta_keymap[] = {
|
|
KEY(0, 0, KEY_F1), /* Advert */
|
|
|
|
KEY(0, 3, KEY_COFFEE), /* Games */
|
|
KEY(0, 2, KEY_QUESTION), /* Directory */
|
|
KEY(2, 3, KEY_CONNECT), /* Internet */
|
|
KEY(1, 2, KEY_SHOP), /* Services */
|
|
KEY(1, 1, KEY_PHONE), /* VoiceMail */
|
|
|
|
KEY(0, 1, KEY_DELETE), /* Delete */
|
|
KEY(2, 2, KEY_PLAY), /* Play */
|
|
KEY(1, 0, KEY_PAGEUP), /* Up */
|
|
KEY(1, 3, KEY_PAGEDOWN), /* Down */
|
|
KEY(2, 0, KEY_EMAIL), /* ReadEmail */
|
|
KEY(2, 1, KEY_STOP), /* Stop */
|
|
|
|
/* Numeric keypad portion */
|
|
KEY(0, 7, KEY_KP1),
|
|
KEY(0, 6, KEY_KP2),
|
|
KEY(0, 5, KEY_KP3),
|
|
KEY(1, 7, KEY_KP4),
|
|
KEY(1, 6, KEY_KP5),
|
|
KEY(1, 5, KEY_KP6),
|
|
KEY(2, 7, KEY_KP7),
|
|
KEY(2, 6, KEY_KP8),
|
|
KEY(2, 5, KEY_KP9),
|
|
KEY(3, 6, KEY_KP0),
|
|
KEY(3, 7, KEY_KPASTERISK),
|
|
KEY(3, 5, KEY_KPDOT), /* # key */
|
|
KEY(7, 2, KEY_NUMLOCK), /* Mute */
|
|
KEY(7, 1, KEY_KPMINUS), /* Recall */
|
|
KEY(6, 1, KEY_KPPLUS), /* Redial */
|
|
KEY(7, 6, KEY_KPSLASH), /* Handsfree */
|
|
KEY(6, 0, KEY_ENTER), /* Video */
|
|
|
|
KEY(7, 4, KEY_CAMERA), /* Photo */
|
|
|
|
KEY(0, 4, KEY_F2), /* Home */
|
|
KEY(1, 4, KEY_F3), /* Office */
|
|
KEY(2, 4, KEY_F4), /* Mobile */
|
|
KEY(7, 7, KEY_F5), /* SMS */
|
|
KEY(7, 5, KEY_F6), /* Email */
|
|
|
|
/* QWERTY portion of keypad */
|
|
KEY(3, 4, KEY_Q),
|
|
KEY(3, 3, KEY_W),
|
|
KEY(3, 2, KEY_E),
|
|
KEY(3, 1, KEY_R),
|
|
KEY(3, 0, KEY_T),
|
|
KEY(4, 7, KEY_Y),
|
|
KEY(4, 6, KEY_U),
|
|
KEY(4, 5, KEY_I),
|
|
KEY(4, 4, KEY_O),
|
|
KEY(4, 3, KEY_P),
|
|
|
|
KEY(4, 2, KEY_A),
|
|
KEY(4, 1, KEY_S),
|
|
KEY(4, 0, KEY_D),
|
|
KEY(5, 7, KEY_F),
|
|
KEY(5, 6, KEY_G),
|
|
KEY(5, 5, KEY_H),
|
|
KEY(5, 4, KEY_J),
|
|
KEY(5, 3, KEY_K),
|
|
KEY(5, 2, KEY_L),
|
|
|
|
KEY(5, 1, KEY_Z),
|
|
KEY(5, 0, KEY_X),
|
|
KEY(6, 7, KEY_C),
|
|
KEY(6, 6, KEY_V),
|
|
KEY(6, 5, KEY_B),
|
|
KEY(6, 4, KEY_N),
|
|
KEY(6, 3, KEY_M),
|
|
KEY(6, 2, KEY_SPACE),
|
|
|
|
KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */
|
|
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
|
|
};
|
|
|
|
#define LATCH1_PHYS 0x01000000
|
|
#define LATCH1_VIRT 0xEA000000
|
|
#define MODEM_PHYS 0x04000000
|
|
#define MODEM_VIRT 0xEB000000
|
|
#define LATCH2_PHYS 0x08000000
|
|
#define LATCH2_VIRT 0xEC000000
|
|
|
|
static struct map_desc ams_delta_io_desc[] __initdata = {
|
|
/* AMS_DELTA_LATCH1 */
|
|
{
|
|
.virtual = LATCH1_VIRT,
|
|
.pfn = __phys_to_pfn(LATCH1_PHYS),
|
|
.length = 0x01000000,
|
|
.type = MT_DEVICE
|
|
},
|
|
/* AMS_DELTA_LATCH2 */
|
|
{
|
|
.virtual = LATCH2_VIRT,
|
|
.pfn = __phys_to_pfn(LATCH2_PHYS),
|
|
.length = 0x01000000,
|
|
.type = MT_DEVICE
|
|
},
|
|
/* AMS_DELTA_MODEM */
|
|
{
|
|
.virtual = MODEM_VIRT,
|
|
.pfn = __phys_to_pfn(MODEM_PHYS),
|
|
.length = 0x01000000,
|
|
.type = MT_DEVICE
|
|
}
|
|
};
|
|
|
|
static struct omap_lcd_config ams_delta_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_usb_config ams_delta_usb_config __initdata = {
|
|
.register_host = 1,
|
|
.hmc_mode = 16,
|
|
.pins[0] = 2,
|
|
};
|
|
|
|
#define LATCH1_GPIO_BASE 232
|
|
#define LATCH1_NGPIO 8
|
|
|
|
static struct resource latch1_resources[] = {
|
|
[0] = {
|
|
.name = "dat",
|
|
.start = LATCH1_PHYS,
|
|
.end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct bgpio_pdata latch1_pdata = {
|
|
.base = LATCH1_GPIO_BASE,
|
|
.ngpio = LATCH1_NGPIO,
|
|
};
|
|
|
|
static struct platform_device latch1_gpio_device = {
|
|
.name = "basic-mmio-gpio",
|
|
.id = 0,
|
|
.resource = latch1_resources,
|
|
.num_resources = ARRAY_SIZE(latch1_resources),
|
|
.dev = {
|
|
.platform_data = &latch1_pdata,
|
|
},
|
|
};
|
|
|
|
static struct resource latch2_resources[] = {
|
|
[0] = {
|
|
.name = "dat",
|
|
.start = LATCH2_PHYS,
|
|
.end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct bgpio_pdata latch2_pdata = {
|
|
.base = AMS_DELTA_LATCH2_GPIO_BASE,
|
|
.ngpio = AMS_DELTA_LATCH2_NGPIO,
|
|
};
|
|
|
|
static struct platform_device latch2_gpio_device = {
|
|
.name = "basic-mmio-gpio",
|
|
.id = 1,
|
|
.resource = latch2_resources,
|
|
.num_resources = ARRAY_SIZE(latch2_resources),
|
|
.dev = {
|
|
.platform_data = &latch2_pdata,
|
|
},
|
|
};
|
|
|
|
static const struct gpio latch_gpios[] __initconst = {
|
|
{
|
|
.gpio = LATCH1_GPIO_BASE + 6,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "dockit1",
|
|
},
|
|
{
|
|
.gpio = LATCH1_GPIO_BASE + 7,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "dockit2",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "scard_rstin",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "scard_cmdvcc",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "modem_codec",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "hookflash1",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "hookflash2",
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply modem_nreset_consumers[] = {
|
|
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
|
|
REGULATOR_SUPPLY("POR", "cx20442-codec"),
|
|
};
|
|
|
|
static struct regulator_init_data modem_nreset_data = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers),
|
|
.consumer_supplies = modem_nreset_consumers,
|
|
};
|
|
|
|
static struct fixed_voltage_config modem_nreset_config = {
|
|
.supply_name = "modem_nreset",
|
|
.microvolts = 3300000,
|
|
.gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
|
|
.startup_delay = 25000,
|
|
.enable_high = 1,
|
|
.enabled_at_boot = 1,
|
|
.init_data = &modem_nreset_data,
|
|
};
|
|
|
|
static struct platform_device modem_nreset_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &modem_nreset_config,
|
|
},
|
|
};
|
|
|
|
struct modem_private_data {
|
|
struct regulator *regulator;
|
|
};
|
|
|
|
static struct modem_private_data modem_priv;
|
|
|
|
void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
|
|
{
|
|
int bit = 0;
|
|
u16 bitpos = 1 << bit;
|
|
|
|
for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
|
|
if (!(mask & bitpos))
|
|
continue;
|
|
else
|
|
gpio_set_value(base + bit, (value & bitpos) != 0);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(ams_delta_latch_write);
|
|
|
|
static struct resource ams_delta_nand_resources[] = {
|
|
[0] = {
|
|
.start = OMAP1_MPUIO_BASE,
|
|
.end = OMAP1_MPUIO_BASE +
|
|
OMAP_MPUIO_IO_CNTL + sizeof(u32) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device ams_delta_nand_device = {
|
|
.name = "ams-delta-nand",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(ams_delta_nand_resources),
|
|
.resource = ams_delta_nand_resources,
|
|
};
|
|
|
|
static struct resource ams_delta_kp_resources[] = {
|
|
[0] = {
|
|
.start = INT_KEYBOARD,
|
|
.end = INT_KEYBOARD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct matrix_keymap_data ams_delta_keymap_data = {
|
|
.keymap = ams_delta_keymap,
|
|
.keymap_size = ARRAY_SIZE(ams_delta_keymap),
|
|
};
|
|
|
|
static struct omap_kp_platform_data ams_delta_kp_data = {
|
|
.rows = 8,
|
|
.cols = 8,
|
|
.keymap_data = &ams_delta_keymap_data,
|
|
.delay = 9,
|
|
};
|
|
|
|
static struct platform_device ams_delta_kp_device = {
|
|
.name = "omap-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ams_delta_kp_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(ams_delta_kp_resources),
|
|
.resource = ams_delta_kp_resources,
|
|
};
|
|
|
|
static struct platform_device ams_delta_lcd_device = {
|
|
.name = "lcd_ams_delta",
|
|
.id = -1,
|
|
};
|
|
|
|
static const struct gpio_led gpio_leds[] __initconst = {
|
|
{
|
|
.name = "camera",
|
|
.gpio = LATCH1_GPIO_BASE + 0,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
#ifdef CONFIG_LEDS_TRIGGERS
|
|
.default_trigger = "ams_delta_camera",
|
|
#endif
|
|
},
|
|
{
|
|
.name = "advert",
|
|
.gpio = LATCH1_GPIO_BASE + 1,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "email",
|
|
.gpio = LATCH1_GPIO_BASE + 2,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "handsfree",
|
|
.gpio = LATCH1_GPIO_BASE + 3,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "voicemail",
|
|
.gpio = LATCH1_GPIO_BASE + 4,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "voice",
|
|
.gpio = LATCH1_GPIO_BASE + 5,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
};
|
|
|
|
static const struct gpio_led_platform_data leds_pdata __initconst = {
|
|
.leds = gpio_leds,
|
|
.num_leds = ARRAY_SIZE(gpio_leds),
|
|
};
|
|
|
|
static struct i2c_board_info ams_delta_camera_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("ov6650", 0x60),
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_LEDS_TRIGGERS
|
|
DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
|
|
|
|
static int ams_delta_camera_power(struct device *dev, int power)
|
|
{
|
|
/*
|
|
* turn on camera LED
|
|
*/
|
|
if (power)
|
|
led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
|
|
else
|
|
led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define ams_delta_camera_power NULL
|
|
#endif
|
|
|
|
static struct soc_camera_link ams_delta_iclink = {
|
|
.bus_id = 0, /* OMAP1 SoC camera bus */
|
|
.i2c_adapter_id = 1,
|
|
.board_info = &ams_delta_camera_board_info[0],
|
|
.module_name = "ov6650",
|
|
.power = ams_delta_camera_power,
|
|
};
|
|
|
|
static struct platform_device ams_delta_camera_device = {
|
|
.name = "soc-camera-pdrv",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &ams_delta_iclink,
|
|
},
|
|
};
|
|
|
|
static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
|
|
.camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */
|
|
.lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */
|
|
};
|
|
|
|
static struct platform_device ams_delta_audio_device = {
|
|
.name = "ams-delta-audio",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device cx20442_codec_device = {
|
|
.name = "cx20442-codec",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device *ams_delta_devices[] __initdata = {
|
|
&latch1_gpio_device,
|
|
&latch2_gpio_device,
|
|
&ams_delta_kp_device,
|
|
&ams_delta_camera_device,
|
|
&ams_delta_audio_device,
|
|
};
|
|
|
|
static struct platform_device *late_devices[] __initdata = {
|
|
&ams_delta_nand_device,
|
|
&ams_delta_lcd_device,
|
|
&cx20442_codec_device,
|
|
};
|
|
|
|
static void __init ams_delta_init(void)
|
|
{
|
|
/* mux pins for uarts */
|
|
omap_cfg_reg(UART1_TX);
|
|
omap_cfg_reg(UART1_RTS);
|
|
|
|
/* parallel camera interface */
|
|
omap_cfg_reg(H19_1610_CAM_EXCLK);
|
|
omap_cfg_reg(J15_1610_CAM_LCLK);
|
|
omap_cfg_reg(L18_1610_CAM_VS);
|
|
omap_cfg_reg(L15_1610_CAM_HS);
|
|
omap_cfg_reg(L19_1610_CAM_D0);
|
|
omap_cfg_reg(K14_1610_CAM_D1);
|
|
omap_cfg_reg(K15_1610_CAM_D2);
|
|
omap_cfg_reg(K19_1610_CAM_D3);
|
|
omap_cfg_reg(K18_1610_CAM_D4);
|
|
omap_cfg_reg(J14_1610_CAM_D5);
|
|
omap_cfg_reg(J19_1610_CAM_D6);
|
|
omap_cfg_reg(J18_1610_CAM_D7);
|
|
|
|
omap_serial_init();
|
|
omap_register_i2c_bus(1, 100, NULL, 0);
|
|
|
|
omap1_usb_init(&ams_delta_usb_config);
|
|
omap1_set_camera_info(&ams_delta_camera_platform_data);
|
|
#ifdef CONFIG_LEDS_TRIGGERS
|
|
led_trigger_register_simple("ams_delta_camera",
|
|
&ams_delta_camera_led_trigger);
|
|
#endif
|
|
gpio_led_register_device(-1, &leds_pdata);
|
|
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
|
|
|
|
ams_delta_init_fiq();
|
|
|
|
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
|
|
|
|
omapfb_set_lcd_config(&ams_delta_lcd_config);
|
|
}
|
|
|
|
static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
|
|
{
|
|
struct modem_private_data *priv = port->private_data;
|
|
|
|
if (IS_ERR(priv->regulator))
|
|
return;
|
|
|
|
if (state == old)
|
|
return;
|
|
|
|
if (state == 0)
|
|
regulator_enable(priv->regulator);
|
|
else if (old == 0)
|
|
regulator_disable(priv->regulator);
|
|
}
|
|
|
|
static struct plat_serial8250_port ams_delta_modem_ports[] = {
|
|
{
|
|
.membase = IOMEM(MODEM_VIRT),
|
|
.mapbase = MODEM_PHYS,
|
|
.irq = -EINVAL, /* changed later */
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.irqflags = IRQF_TRIGGER_RISING,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 1,
|
|
.uartclk = BASE_BAUD * 16,
|
|
.pm = modem_pm,
|
|
.private_data = &modem_priv,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device ams_delta_modem_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM1,
|
|
.dev = {
|
|
.platform_data = ams_delta_modem_ports,
|
|
},
|
|
};
|
|
|
|
static int __init late_init(void)
|
|
{
|
|
int err;
|
|
|
|
if (!machine_is_ams_delta())
|
|
return -ENODEV;
|
|
|
|
err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
|
|
if (err) {
|
|
pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
|
|
return err;
|
|
}
|
|
|
|
platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
|
|
|
|
err = platform_device_register(&modem_nreset_device);
|
|
if (err) {
|
|
pr_err("Couldn't register the modem regulator device\n");
|
|
return err;
|
|
}
|
|
|
|
omap_cfg_reg(M14_1510_GPIO2);
|
|
ams_delta_modem_ports[0].irq =
|
|
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
|
|
|
|
err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
|
|
if (err) {
|
|
pr_err("Couldn't request gpio pin for modem\n");
|
|
return err;
|
|
}
|
|
gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
|
|
|
|
/* Initialize the modem_nreset regulator consumer before use */
|
|
modem_priv.regulator = ERR_PTR(-ENODEV);
|
|
|
|
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
|
|
AMS_DELTA_LATCH2_MODEM_CODEC);
|
|
|
|
err = platform_device_register(&ams_delta_modem_device);
|
|
if (err)
|
|
goto gpio_free;
|
|
|
|
/*
|
|
* Once the modem device is registered, the modem_nreset
|
|
* regulator can be requested on behalf of that device.
|
|
*/
|
|
modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
|
|
"RESET#");
|
|
if (IS_ERR(modem_priv.regulator)) {
|
|
err = PTR_ERR(modem_priv.regulator);
|
|
goto unregister;
|
|
}
|
|
return 0;
|
|
|
|
unregister:
|
|
platform_device_unregister(&ams_delta_modem_device);
|
|
gpio_free:
|
|
gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
|
|
return err;
|
|
}
|
|
|
|
static void __init ams_delta_init_late(void)
|
|
{
|
|
omap1_init_late();
|
|
late_init();
|
|
}
|
|
|
|
static void __init ams_delta_map_io(void)
|
|
{
|
|
omap15xx_map_io();
|
|
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
|
|
}
|
|
|
|
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
|
|
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
|
|
.atag_offset = 0x100,
|
|
.map_io = ams_delta_map_io,
|
|
.init_early = omap1_init_early,
|
|
.init_irq = omap1_init_irq,
|
|
.handle_irq = omap1_handle_irq,
|
|
.init_machine = ams_delta_init,
|
|
.init_late = ams_delta_init_late,
|
|
.init_time = omap1_timer_init,
|
|
.restart = omap1_restart,
|
|
MACHINE_END
|