mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 14:40:53 +07:00
8a48ac3393
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. This does not cover all drivers; some actually modify the fbops struct, for example to adjust for different configurations, and others do more involved things that I'd rather not touch in practically obsolete drivers. Mostly this is the low hanging fruit where we can add "const" and be done with it. v3: - un-constify atyfb, mb862xx, nvidia and uvesabf (0day) v2: - fix typo (Christophe de Dinechin) - use "static const" instead of "const static" in mx3fb.c - also constify smscufx.c Cc: linux-fbdev@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ce67f14435f3af498f2e8bf35ce4be11f7504132.1575390740.git.jani.nikula@intel.com
306 lines
8.0 KiB
C
306 lines
8.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/amigahw.h>
|
|
#include <asm/amigaints.h>
|
|
#include <asm/apollohw.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/module.h>
|
|
|
|
/* apollo video HW definitions */
|
|
|
|
/*
|
|
* Control Registers. IOBASE + $x
|
|
*
|
|
* Note: these are the Memory/IO BASE definitions for a mono card set to the
|
|
* alternate address
|
|
*
|
|
* Control 3A and 3B serve identical functions except that 3A
|
|
* deals with control 1 and 3b deals with Color LUT reg.
|
|
*/
|
|
|
|
#define AP_IOBASE 0x3b0 /* Base address of 1 plane board. */
|
|
#define AP_STATUS isaIO2mem(AP_IOBASE+0) /* Status register. Read */
|
|
#define AP_WRITE_ENABLE isaIO2mem(AP_IOBASE+0) /* Write Enable Register Write */
|
|
#define AP_DEVICE_ID isaIO2mem(AP_IOBASE+1) /* Device ID Register. Read */
|
|
#define AP_ROP_1 isaIO2mem(AP_IOBASE+2) /* Raster Operation reg. Write Word */
|
|
#define AP_DIAG_MEM_REQ isaIO2mem(AP_IOBASE+4) /* Diagnostic Memory Request. Write Word */
|
|
#define AP_CONTROL_0 isaIO2mem(AP_IOBASE+8) /* Control Register 0. Read/Write */
|
|
#define AP_CONTROL_1 isaIO2mem(AP_IOBASE+0xa) /* Control Register 1. Read/Write */
|
|
#define AP_CONTROL_3A isaIO2mem(AP_IOBASE+0xe) /* Control Register 3a. Read/Write */
|
|
#define AP_CONTROL_2 isaIO2mem(AP_IOBASE+0xc) /* Control Register 2. Read/Write */
|
|
|
|
|
|
#define FRAME_BUFFER_START 0x0FA0000
|
|
#define FRAME_BUFFER_LEN 0x40000
|
|
|
|
/* CREG 0 */
|
|
#define VECTOR_MODE 0x40 /* 010x.xxxx */
|
|
#define DBLT_MODE 0x80 /* 100x.xxxx */
|
|
#define NORMAL_MODE 0xE0 /* 111x.xxxx */
|
|
#define SHIFT_BITS 0x1F /* xxx1.1111 */
|
|
/* other bits are Shift value */
|
|
|
|
/* CREG 1 */
|
|
#define AD_BLT 0x80 /* 1xxx.xxxx */
|
|
#define NORMAL 0x80 /* 1xxx.xxxx */ /* What is happening here ?? */
|
|
#define INVERSE 0x00 /* 0xxx.xxxx */ /* Clearing this reverses the screen */
|
|
#define PIX_BLT 0x00 /* 0xxx.xxxx */
|
|
|
|
#define AD_HIBIT 0x40 /* xIxx.xxxx */
|
|
|
|
#define ROP_EN 0x10 /* xxx1.xxxx */
|
|
#define DST_EQ_SRC 0x00 /* xxx0.xxxx */
|
|
#define nRESET_SYNC 0x08 /* xxxx.1xxx */
|
|
#define SYNC_ENAB 0x02 /* xxxx.xx1x */
|
|
|
|
#define BLANK_DISP 0x00 /* xxxx.xxx0 */
|
|
#define ENAB_DISP 0x01 /* xxxx.xxx1 */
|
|
|
|
#define NORM_CREG1 (nRESET_SYNC | SYNC_ENAB | ENAB_DISP) /* no reset sync */
|
|
|
|
/* CREG 2 */
|
|
|
|
/*
|
|
* Following 3 defines are common to 1, 4 and 8 plane.
|
|
*/
|
|
|
|
#define S_DATA_1s 0x00 /* 00xx.xxxx */ /* set source to all 1's -- vector drawing */
|
|
#define S_DATA_PIX 0x40 /* 01xx.xxxx */ /* takes source from ls-bits and replicates over 16 bits */
|
|
#define S_DATA_PLN 0xC0 /* 11xx.xxxx */ /* normal, each data access =16-bits in
|
|
one plane of image mem */
|
|
|
|
/* CREG 3A/CREG 3B */
|
|
# define RESET_CREG 0x80 /* 1000.0000 */
|
|
|
|
/* ROP REG - all one nibble */
|
|
/* ********* NOTE : this is used r0,r1,r2,r3 *********** */
|
|
#define ROP(r2,r3,r0,r1) ( (U_SHORT)((r0)|((r1)<<4)|((r2)<<8)|((r3)<<12)) )
|
|
#define DEST_ZERO 0x0
|
|
#define SRC_AND_DEST 0x1
|
|
#define SRC_AND_nDEST 0x2
|
|
#define SRC 0x3
|
|
#define nSRC_AND_DEST 0x4
|
|
#define DEST 0x5
|
|
#define SRC_XOR_DEST 0x6
|
|
#define SRC_OR_DEST 0x7
|
|
#define SRC_NOR_DEST 0x8
|
|
#define SRC_XNOR_DEST 0x9
|
|
#define nDEST 0xA
|
|
#define SRC_OR_nDEST 0xB
|
|
#define nSRC 0xC
|
|
#define nSRC_OR_DEST 0xD
|
|
#define SRC_NAND_DEST 0xE
|
|
#define DEST_ONE 0xF
|
|
|
|
#define SWAP(A) ((A>>8) | ((A&0xff) <<8))
|
|
|
|
/* frame buffer operations */
|
|
|
|
static int dnfb_blank(int blank, struct fb_info *info);
|
|
static void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
|
|
|
|
static const struct fb_ops dn_fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_blank = dnfb_blank,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = dnfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
static const struct fb_var_screeninfo dnfb_var = {
|
|
.xres = 1280,
|
|
.yres = 1024,
|
|
.xres_virtual = 2048,
|
|
.yres_virtual = 1024,
|
|
.bits_per_pixel = 1,
|
|
.height = -1,
|
|
.width = -1,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
};
|
|
|
|
static const struct fb_fix_screeninfo dnfb_fix = {
|
|
.id = "Apollo Mono",
|
|
.smem_start = (FRAME_BUFFER_START + IO_BASE),
|
|
.smem_len = FRAME_BUFFER_LEN,
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.visual = FB_VISUAL_MONO10,
|
|
.line_length = 256,
|
|
};
|
|
|
|
static int dnfb_blank(int blank, struct fb_info *info)
|
|
{
|
|
if (blank)
|
|
out_8(AP_CONTROL_3A, 0x0);
|
|
else
|
|
out_8(AP_CONTROL_3A, 0x1);
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
|
|
{
|
|
|
|
int incr, y_delta, pre_read = 0, x_end, x_word_count;
|
|
uint start_mask, end_mask, dest;
|
|
ushort *src, dummy;
|
|
short i, j;
|
|
|
|
incr = (area->dy <= area->sy) ? 1 : -1;
|
|
|
|
src = (ushort *)(info->screen_base + area->sy * info->fix.line_length +
|
|
(area->sx >> 4));
|
|
dest = area->dy * (info->fix.line_length >> 1) + (area->dx >> 4);
|
|
|
|
if (incr > 0) {
|
|
y_delta = (info->fix.line_length * 8) - area->sx - area->width;
|
|
x_end = area->dx + area->width - 1;
|
|
x_word_count = (x_end >> 4) - (area->dx >> 4) + 1;
|
|
start_mask = 0xffff0000 >> (area->dx & 0xf);
|
|
end_mask = 0x7ffff >> (x_end & 0xf);
|
|
out_8(AP_CONTROL_0,
|
|
(((area->dx & 0xf) - (area->sx & 0xf)) % 16) | (0x4 << 5));
|
|
if ((area->dx & 0xf) < (area->sx & 0xf))
|
|
pre_read = 1;
|
|
} else {
|
|
y_delta = -((info->fix.line_length * 8) - area->sx - area->width);
|
|
x_end = area->dx - area->width + 1;
|
|
x_word_count = (area->dx >> 4) - (x_end >> 4) + 1;
|
|
start_mask = 0x7ffff >> (area->dx & 0xf);
|
|
end_mask = 0xffff0000 >> (x_end & 0xf);
|
|
out_8(AP_CONTROL_0,
|
|
((-((area->sx & 0xf) - (area->dx & 0xf))) % 16) |
|
|
(0x4 << 5));
|
|
if ((area->dx & 0xf) > (area->sx & 0xf))
|
|
pre_read = 1;
|
|
}
|
|
|
|
for (i = 0; i < area->height; i++) {
|
|
|
|
out_8(AP_CONTROL_3A, 0xc | (dest >> 16));
|
|
|
|
if (pre_read) {
|
|
dummy = *src;
|
|
src += incr;
|
|
}
|
|
|
|
if (x_word_count) {
|
|
out_8(AP_WRITE_ENABLE, start_mask);
|
|
*src = dest;
|
|
src += incr;
|
|
dest += incr;
|
|
out_8(AP_WRITE_ENABLE, 0);
|
|
|
|
for (j = 1; j < (x_word_count - 1); j++) {
|
|
*src = dest;
|
|
src += incr;
|
|
dest += incr;
|
|
}
|
|
|
|
out_8(AP_WRITE_ENABLE, start_mask);
|
|
*src = dest;
|
|
dest += incr;
|
|
src += incr;
|
|
} else {
|
|
out_8(AP_WRITE_ENABLE, start_mask | end_mask);
|
|
*src = dest;
|
|
dest += incr;
|
|
src += incr;
|
|
}
|
|
src += (y_delta / 16);
|
|
dest += (y_delta / 16);
|
|
}
|
|
out_8(AP_CONTROL_0, NORMAL_MODE);
|
|
}
|
|
|
|
/*
|
|
* Initialization
|
|
*/
|
|
|
|
static int dnfb_probe(struct platform_device *dev)
|
|
{
|
|
struct fb_info *info;
|
|
int err = 0;
|
|
|
|
info = framebuffer_alloc(0, &dev->dev);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
info->fbops = &dn_fb_ops;
|
|
info->fix = dnfb_fix;
|
|
info->var = dnfb_var;
|
|
info->var.red.length = 1;
|
|
info->var.red.offset = 0;
|
|
info->var.green = info->var.blue = info->var.red;
|
|
info->screen_base = (u_char *) info->fix.smem_start;
|
|
|
|
err = fb_alloc_cmap(&info->cmap, 2, 0);
|
|
if (err < 0)
|
|
goto release_framebuffer;
|
|
|
|
err = register_framebuffer(info);
|
|
if (err < 0) {
|
|
fb_dealloc_cmap(&info->cmap);
|
|
goto release_framebuffer;
|
|
}
|
|
platform_set_drvdata(dev, info);
|
|
|
|
/* now we have registered we can safely setup the hardware */
|
|
out_8(AP_CONTROL_3A, RESET_CREG);
|
|
out_be16(AP_WRITE_ENABLE, 0x0);
|
|
out_8(AP_CONTROL_0, NORMAL_MODE);
|
|
out_8(AP_CONTROL_1, (AD_BLT | DST_EQ_SRC | NORM_CREG1));
|
|
out_8(AP_CONTROL_2, S_DATA_PLN);
|
|
out_be16(AP_ROP_1, SWAP(0x3));
|
|
|
|
printk("apollo frame buffer alive and kicking !\n");
|
|
return err;
|
|
|
|
release_framebuffer:
|
|
framebuffer_release(info);
|
|
return err;
|
|
}
|
|
|
|
static struct platform_driver dnfb_driver = {
|
|
.probe = dnfb_probe,
|
|
.driver = {
|
|
.name = "dnfb",
|
|
},
|
|
};
|
|
|
|
static struct platform_device dnfb_device = {
|
|
.name = "dnfb",
|
|
};
|
|
|
|
int __init dnfb_init(void)
|
|
{
|
|
int ret;
|
|
|
|
if (!MACH_IS_APOLLO)
|
|
return -ENODEV;
|
|
|
|
if (fb_get_options("dnfb", NULL))
|
|
return -ENODEV;
|
|
|
|
ret = platform_driver_register(&dnfb_driver);
|
|
|
|
if (!ret) {
|
|
ret = platform_device_register(&dnfb_device);
|
|
if (ret)
|
|
platform_driver_unregister(&dnfb_driver);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
module_init(dnfb_init);
|
|
|
|
MODULE_LICENSE("GPL");
|