mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 01:26:29 +07:00
0c5220a3c1
Commita758f50f10("mtd: onenand: omap2: Configure driver from DT") started using DT specified timings for GPMC, and as a result the OneNAND stopped working on N900 as we had wrong values in the DT. Fix by updating the values to bootloader timings that have been tested to be working on Nokia N900 with OneNAND manufacturers: Samsung, Numonyx. Fixes:a758f50f10("mtd: onenand: omap2: Configure driver from DT") Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com> Tested-by: Merlijn Wajer <merlijn@wizzup.org> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
1157 lines
29 KiB
Plaintext
1157 lines
29 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
|
|
* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "omap34xx.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/*
|
|
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
|
|
* for omap AES HW crypto support. When linux kernel try to access memory of AES
|
|
* blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
|
|
* and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
|
|
* crash anymore) omap AES support will be disabled for all Nokia N900 devices.
|
|
* There is "unofficial" version of bootloader which enables AES in L3 firewall
|
|
* but it is not widely used and to prevent kernel crash rather AES is disabled.
|
|
* There is also no runtime detection code if AES is disabled in L3 firewall...
|
|
*/
|
|
&aes {
|
|
status = "disabled";
|
|
};
|
|
|
|
/ {
|
|
model = "Nokia N900";
|
|
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
|
|
|
|
aliases {
|
|
i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
display0 = &lcd;
|
|
display1 = &tv;
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vcc>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
heartbeat {
|
|
label = "debug::sleep";
|
|
gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
|
|
linux,default-trigger = "default-on";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&debug_leds>;
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
|
|
camera_lens_cover {
|
|
label = "Camera Lens Cover";
|
|
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_CAMERA_LENS_COVER>;
|
|
linux,can-disable;
|
|
};
|
|
|
|
camera_focus {
|
|
label = "Camera Focus";
|
|
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
|
linux,can-disable;
|
|
};
|
|
|
|
camera_capture {
|
|
label = "Camera Capture";
|
|
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
|
|
linux,code = <KEY_CAMERA>;
|
|
linux,can-disable;
|
|
};
|
|
|
|
lock_button {
|
|
label = "Lock Button";
|
|
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
|
|
linux,code = <KEY_SCREENLOCK>;
|
|
linux,can-disable;
|
|
};
|
|
|
|
keypad_slide {
|
|
label = "Keypad Slide";
|
|
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_KEYPAD_SLIDE>;
|
|
linux,can-disable;
|
|
};
|
|
|
|
proximity_sensor {
|
|
label = "Proximity Sensor";
|
|
gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_FRONT_PROXIMITY>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
isp1707: isp1707 {
|
|
compatible = "nxp,isp1707";
|
|
nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
|
usb-phy = <&usb2_phy>;
|
|
};
|
|
|
|
tv: connector {
|
|
compatible = "composite-video-connector";
|
|
label = "tv";
|
|
|
|
port {
|
|
tv_connector_in: endpoint {
|
|
remote-endpoint = <&venc_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sound: n900-audio {
|
|
compatible = "nokia,n900-audio";
|
|
|
|
nokia,cpu-dai = <&mcbsp2>;
|
|
nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
|
|
nokia,headphone-amplifier = <&tpa6130a2>;
|
|
|
|
tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
|
|
jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
|
|
eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
|
|
speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
battery: n900-battery {
|
|
compatible = "nokia,n900-battery";
|
|
io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
|
|
io-channel-names = "temp", "bsi", "vbat";
|
|
};
|
|
|
|
pwm9: dmtimer-pwm {
|
|
compatible = "ti,omap-dmtimer-pwm";
|
|
#pwm-cells = <3>;
|
|
ti,timers = <&timer9>;
|
|
ti,clock-source = <0x00>; /* timer_sys_ck */
|
|
};
|
|
|
|
ir: n900-ir {
|
|
compatible = "nokia,n900-ir";
|
|
pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
|
|
};
|
|
|
|
rom_rng: rng {
|
|
compatible = "nokia,n900-rom-rng";
|
|
clocks = <&rng_ick>;
|
|
clock-names = "ick";
|
|
};
|
|
|
|
/* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
|
|
vctcxo: vctcxo {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <38400000>;
|
|
};
|
|
};
|
|
|
|
&isp {
|
|
vdds_csib-supply = <&vaux2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&camera_pins>;
|
|
|
|
ports {
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
csi_isp: endpoint {
|
|
remote-endpoint = <&csi_cam1>;
|
|
bus-type = <3>; /* CCP2 */
|
|
clock-lanes = <1>;
|
|
data-lanes = <0>;
|
|
lane-polarity = <0 0>;
|
|
/* Select strobe = <1> for back camera, <0> for front camera */
|
|
strobe = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
pinctrl-names = "default";
|
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
|
|
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
|
|
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
|
|
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
|
|
>;
|
|
};
|
|
|
|
uart3_pins: pinmux_uart3_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
|
|
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
|
|
>;
|
|
};
|
|
|
|
ethernet_pins: pinmux_ethernet_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
|
|
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
|
|
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
|
|
>;
|
|
};
|
|
|
|
gpmc_pins: pinmux_gpmc_pins {
|
|
pinctrl-single,pins = <
|
|
|
|
/* address lines */
|
|
OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
|
|
OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
|
|
OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
|
|
|
|
/* data lines, gpmc_d0..d7 not muxable according to TRM */
|
|
OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
|
|
OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
|
|
OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
|
|
OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
|
|
OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
|
|
OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
|
|
OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
|
|
OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
|
|
|
|
/*
|
|
* gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
|
|
* according to TRM. OneNAND seems to require PIN_INPUT on clock.
|
|
*/
|
|
OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
|
|
OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
|
|
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
|
|
>;
|
|
};
|
|
|
|
i2c2_pins: pinmux_i2c2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
|
|
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
|
|
>;
|
|
};
|
|
|
|
i2c3_pins: pinmux_i2c3_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
|
|
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
|
|
>;
|
|
};
|
|
|
|
debug_leds: pinmux_debug_led_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
|
|
>;
|
|
};
|
|
|
|
mcspi4_pins: pinmux_mcspi4_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
|
|
OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
|
|
OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
|
|
OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
|
|
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
|
|
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
|
|
>;
|
|
};
|
|
|
|
mmc2_pins: pinmux_mmc2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
|
|
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
|
|
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
|
|
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
|
|
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
|
|
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
|
|
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
|
|
>;
|
|
};
|
|
|
|
acx565akm_pins: pinmux_acx565akm_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
|
|
>;
|
|
};
|
|
|
|
dss_sdi_pins: pinmux_dss_sdi_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
|
|
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
|
|
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
|
|
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
|
|
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
|
|
>;
|
|
};
|
|
|
|
wl1251_pins: pinmux_wl1251 {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
|
|
OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
|
|
>;
|
|
};
|
|
|
|
ssi_pins: pinmux_ssi {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
|
|
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
|
|
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
|
|
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
|
|
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
|
|
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
|
|
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
|
|
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
|
|
>;
|
|
};
|
|
|
|
modem_pins: pinmux_modem {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
|
|
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
|
|
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
|
|
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
|
|
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
|
|
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
|
|
>;
|
|
};
|
|
|
|
camera_pins: pinmux_camera {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */
|
|
OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */
|
|
OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
|
|
OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */
|
|
OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */
|
|
OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */
|
|
OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */
|
|
OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */
|
|
OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */
|
|
OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */
|
|
OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
clock-frequency = <2200000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
};
|
|
|
|
#include "twl4030.dtsi"
|
|
#include "twl4030_omap3.dtsi"
|
|
|
|
&vaux1 {
|
|
regulator-name = "V28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
regulator-always-on; /* due to battery cover sensor */
|
|
};
|
|
|
|
&vaux2 {
|
|
regulator-name = "VCSI";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
};
|
|
|
|
&vaux3 {
|
|
regulator-name = "VMMC2_30";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
};
|
|
|
|
&vaux4 {
|
|
regulator-name = "VCAM_ANA_28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
};
|
|
|
|
&vmmc1 {
|
|
regulator-name = "VMMC1";
|
|
regulator-min-microvolt = <1850000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
};
|
|
|
|
&vmmc2 {
|
|
regulator-name = "V28_A";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
regulator-always-on; /* due VIO leak to AIC34 VDDs */
|
|
};
|
|
|
|
&vpll1 {
|
|
regulator-name = "VPLL";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
regulator-always-on;
|
|
};
|
|
|
|
&vpll2 {
|
|
regulator-name = "VSDI_CSI";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
regulator-always-on;
|
|
};
|
|
|
|
&vsim {
|
|
regulator-name = "VMMC2_IO_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
|
};
|
|
|
|
&vio {
|
|
regulator-name = "VIO";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&vintana1 {
|
|
regulator-name = "VINTANA1";
|
|
/* fixed to 1500000 */
|
|
regulator-always-on;
|
|
};
|
|
|
|
&vintana2 {
|
|
regulator-name = "VINTANA2";
|
|
regulator-min-microvolt = <2750000>;
|
|
regulator-max-microvolt = <2750000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
&vintdig {
|
|
regulator-name = "VINTDIG";
|
|
/* fixed to 1500000 */
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* First two dma channels are reserved on secure omap3 */
|
|
&sdma {
|
|
dma-channel-mask = <0xfffffffc>;
|
|
};
|
|
|
|
&twl {
|
|
twl_audio: audio {
|
|
compatible = "ti,twl4030-audio";
|
|
ti,enable-vibra = <1>;
|
|
};
|
|
|
|
twl_power: power {
|
|
compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
|
|
ti,use_poweroff;
|
|
};
|
|
};
|
|
|
|
&twl_keypad {
|
|
linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
|
|
MATRIX_KEY(0x00, 0x01, KEY_O)
|
|
MATRIX_KEY(0x00, 0x02, KEY_P)
|
|
MATRIX_KEY(0x00, 0x03, KEY_COMMA)
|
|
MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
|
|
MATRIX_KEY(0x00, 0x06, KEY_A)
|
|
MATRIX_KEY(0x00, 0x07, KEY_S)
|
|
|
|
MATRIX_KEY(0x01, 0x00, KEY_W)
|
|
MATRIX_KEY(0x01, 0x01, KEY_D)
|
|
MATRIX_KEY(0x01, 0x02, KEY_F)
|
|
MATRIX_KEY(0x01, 0x03, KEY_G)
|
|
MATRIX_KEY(0x01, 0x04, KEY_H)
|
|
MATRIX_KEY(0x01, 0x05, KEY_J)
|
|
MATRIX_KEY(0x01, 0x06, KEY_K)
|
|
MATRIX_KEY(0x01, 0x07, KEY_L)
|
|
|
|
MATRIX_KEY(0x02, 0x00, KEY_E)
|
|
MATRIX_KEY(0x02, 0x01, KEY_DOT)
|
|
MATRIX_KEY(0x02, 0x02, KEY_UP)
|
|
MATRIX_KEY(0x02, 0x03, KEY_ENTER)
|
|
MATRIX_KEY(0x02, 0x05, KEY_Z)
|
|
MATRIX_KEY(0x02, 0x06, KEY_X)
|
|
MATRIX_KEY(0x02, 0x07, KEY_C)
|
|
MATRIX_KEY(0x02, 0x08, KEY_F9)
|
|
|
|
MATRIX_KEY(0x03, 0x00, KEY_R)
|
|
MATRIX_KEY(0x03, 0x01, KEY_V)
|
|
MATRIX_KEY(0x03, 0x02, KEY_B)
|
|
MATRIX_KEY(0x03, 0x03, KEY_N)
|
|
MATRIX_KEY(0x03, 0x04, KEY_M)
|
|
MATRIX_KEY(0x03, 0x05, KEY_SPACE)
|
|
MATRIX_KEY(0x03, 0x06, KEY_SPACE)
|
|
MATRIX_KEY(0x03, 0x07, KEY_LEFT)
|
|
|
|
MATRIX_KEY(0x04, 0x00, KEY_T)
|
|
MATRIX_KEY(0x04, 0x01, KEY_DOWN)
|
|
MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
|
|
MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
|
|
MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
|
|
MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
|
|
MATRIX_KEY(0x04, 0x08, KEY_F10)
|
|
|
|
MATRIX_KEY(0x05, 0x00, KEY_Y)
|
|
MATRIX_KEY(0x05, 0x08, KEY_F11)
|
|
|
|
MATRIX_KEY(0x06, 0x00, KEY_U)
|
|
|
|
MATRIX_KEY(0x07, 0x00, KEY_I)
|
|
MATRIX_KEY(0x07, 0x01, KEY_F7)
|
|
MATRIX_KEY(0x07, 0x02, KEY_F8)
|
|
>;
|
|
};
|
|
|
|
&twl_gpio {
|
|
ti,pullups = <0x0>;
|
|
ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
tlv320aic3x: tlv320aic3x@18 {
|
|
compatible = "ti,tlv320aic3x";
|
|
reg = <0x18>;
|
|
reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
|
|
ai3x-gpio-func = <
|
|
0 /* AIC3X_GPIO1_FUNC_DISABLED */
|
|
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
|
|
>;
|
|
|
|
AVDD-supply = <&vmmc2>;
|
|
DRVDD-supply = <&vmmc2>;
|
|
IOVDD-supply = <&vio>;
|
|
DVDD-supply = <&vio>;
|
|
|
|
ai3x-micbias-vg = <1>;
|
|
};
|
|
|
|
tlv320aic3x_aux: tlv320aic3x@19 {
|
|
compatible = "ti,tlv320aic3x";
|
|
reg = <0x19>;
|
|
reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
|
|
|
|
AVDD-supply = <&vmmc2>;
|
|
DRVDD-supply = <&vmmc2>;
|
|
IOVDD-supply = <&vio>;
|
|
DVDD-supply = <&vio>;
|
|
|
|
ai3x-micbias-vg = <2>;
|
|
};
|
|
|
|
tsl2563: tsl2563@29 {
|
|
compatible = "amstaos,tsl2563";
|
|
reg = <0x29>;
|
|
|
|
amstaos,cover-comp-gain = <16>;
|
|
};
|
|
|
|
adp1653: led-controller@30 {
|
|
compatible = "adi,adp1653";
|
|
reg = <0x30>;
|
|
enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
|
|
|
|
flash {
|
|
flash-timeout-us = <500000>;
|
|
flash-max-microamp = <320000>;
|
|
led-max-microamp = <50000>;
|
|
};
|
|
indicator {
|
|
led-max-microamp = <17500>;
|
|
};
|
|
};
|
|
|
|
lp5523: lp5523@32 {
|
|
compatible = "national,lp5523";
|
|
reg = <0x32>;
|
|
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
|
|
enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
|
|
|
|
chan0 {
|
|
chan-name = "lp5523:kb1";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan1 {
|
|
chan-name = "lp5523:kb2";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan2 {
|
|
chan-name = "lp5523:kb3";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan3 {
|
|
chan-name = "lp5523:kb4";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan4 {
|
|
chan-name = "lp5523:b";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan5 {
|
|
chan-name = "lp5523:g";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan6 {
|
|
chan-name = "lp5523:r";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan7 {
|
|
chan-name = "lp5523:kb5";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
|
|
chan8 {
|
|
chan-name = "lp5523:kb6";
|
|
led-cur = /bits/ 8 <50>;
|
|
max-cur = /bits/ 8 <100>;
|
|
};
|
|
};
|
|
|
|
bq27200: bq27200@55 {
|
|
compatible = "ti,bq27200";
|
|
reg = <0x55>;
|
|
power-supplies = <&bq24150a>;
|
|
};
|
|
|
|
/* Stereo headphone amplifier */
|
|
tpa6130a2: tpa6130a2@60 {
|
|
compatible = "ti,tpa6130a2";
|
|
reg = <0x60>;
|
|
|
|
Vdd-supply = <&vmmc2>;
|
|
|
|
power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
|
|
};
|
|
|
|
si4713: si4713@63 {
|
|
compatible = "silabs,si4713";
|
|
reg = <0x63>;
|
|
|
|
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
|
|
reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
|
|
vio-supply = <&vio>;
|
|
vdd-supply = <&vaux1>;
|
|
};
|
|
|
|
bq24150a: bq24150a@6b {
|
|
compatible = "ti,bq24150a";
|
|
reg = <0x6b>;
|
|
|
|
ti,current-limit = <100>;
|
|
ti,weak-battery-voltage = <3400>;
|
|
ti,battery-regulation-voltage = <4200>;
|
|
ti,charge-current = <650>;
|
|
ti,termination-current = <100>;
|
|
ti,resistor-sense = <68>;
|
|
|
|
ti,usb-charger-detection = <&isp1707>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
lis302dl: lis3lv02d@1d {
|
|
compatible = "st,lis3lv02d";
|
|
reg = <0x1d>;
|
|
|
|
Vdd-supply = <&vaux1>;
|
|
Vdd_IO-supply = <&vio>;
|
|
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <21 20>; /* 181 and 180 */
|
|
|
|
/* click flags */
|
|
st,click-single-x;
|
|
st,click-single-y;
|
|
st,click-single-z;
|
|
|
|
/* Limits are 0.5g * value */
|
|
st,click-threshold-x = <8>;
|
|
st,click-threshold-y = <8>;
|
|
st,click-threshold-z = <10>;
|
|
|
|
/* Click must be longer than time limit */
|
|
st,click-time-limit = <9>;
|
|
|
|
/* Kind of debounce filter */
|
|
st,click-latency = <50>;
|
|
|
|
/* Interrupt line 2 for click detection */
|
|
st,irq2-click;
|
|
|
|
st,wakeup-x-hi;
|
|
st,wakeup-y-hi;
|
|
st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
|
|
|
|
st,wakeup2-z-hi;
|
|
st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
|
|
|
|
st,hipass1-disable;
|
|
st,hipass2-disable;
|
|
|
|
st,axis-x = <1>; /* LIS3_DEV_X */
|
|
st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
|
|
st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
|
|
|
|
st,min-limit-x = <(-32)>;
|
|
st,min-limit-y = <3>;
|
|
st,min-limit-z = <3>;
|
|
|
|
st,max-limit-x = <(-3)>;
|
|
st,max-limit-y = <32>;
|
|
st,max-limit-z = <32>;
|
|
};
|
|
|
|
cam1: camera@3e {
|
|
compatible = "toshiba,et8ek8";
|
|
reg = <0x3e>;
|
|
|
|
vana-supply = <&vaux4>;
|
|
|
|
clocks = <&isp 0>;
|
|
clock-names = "extclk";
|
|
clock-frequency = <9600000>;
|
|
|
|
reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
|
|
|
|
lens-focus = <&ad5820>;
|
|
|
|
port {
|
|
csi_cam1: endpoint {
|
|
bus-type = <3>; /* CCP2 */
|
|
strobe = <1>;
|
|
clock-inv = <0>;
|
|
crc = <1>;
|
|
|
|
remote-endpoint = <&csi_isp>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* D/A converter for auto-focus */
|
|
ad5820: dac@c {
|
|
compatible = "adi,ad5820";
|
|
reg = <0x0c>;
|
|
|
|
VANA-supply = <&vaux4>;
|
|
|
|
#io-channel-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <&vmmc1>;
|
|
bus-width = <4>;
|
|
/* For debugging, it is often good idea to remove this GPIO.
|
|
It means you can remove back cover (to reboot by removing
|
|
battery) and still use the MMC card. */
|
|
cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
|
|
};
|
|
|
|
/* most boards use vaux3, only some old versions use vmmc2 instead */
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
vmmc-supply = <&vaux3>;
|
|
vqmmc-supply = <&vsim>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
no-sdio;
|
|
no-sd;
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
|
|
<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpmc_pins>;
|
|
|
|
/* sys_ndmareq1 could be used by the driver, not as gpio65 though */
|
|
onenand@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "ti,omap2-onenand";
|
|
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
|
|
|
|
/*
|
|
* These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
|
|
* bootloader set values when booted with v5.1
|
|
* (OneNAND Manufacturer: Samsung):
|
|
*
|
|
* cs0 GPMC_CS_CONFIG1: 0xfb001202
|
|
* cs0 GPMC_CS_CONFIG2: 0x00111100
|
|
* cs0 GPMC_CS_CONFIG3: 0x00020200
|
|
* cs0 GPMC_CS_CONFIG4: 0x11001102
|
|
* cs0 GPMC_CS_CONFIG5: 0x03101616
|
|
* cs0 GPMC_CS_CONFIG6: 0x90060000
|
|
*/
|
|
gpmc,sync-read;
|
|
gpmc,sync-write;
|
|
gpmc,burst-length = <16>;
|
|
gpmc,burst-read;
|
|
gpmc,burst-wrap;
|
|
gpmc,burst-write;
|
|
gpmc,device-width = <2>;
|
|
gpmc,mux-add-data = <2>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <102>;
|
|
gpmc,cs-wr-off-ns = <102>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <12>;
|
|
gpmc,adv-wr-off-ns = <12>;
|
|
gpmc,oe-on-ns = <12>;
|
|
gpmc,oe-off-ns = <102>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <102>;
|
|
gpmc,rd-cycle-ns = <132>;
|
|
gpmc,wr-cycle-ns = <132>;
|
|
gpmc,access-ns = <96>;
|
|
gpmc,page-burst-access-ns = <18>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,clk-activation-ns = <6>;
|
|
gpmc,wr-data-mux-bus-ns = <36>;
|
|
gpmc,wr-access-ns = <96>;
|
|
gpmc,sync-clk-ps = <15000>;
|
|
|
|
/*
|
|
* MTD partition table corresponding to Nokia's
|
|
* Maemo 5 (Fremantle) release.
|
|
*/
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x00000000 0x00020000>;
|
|
read-only;
|
|
};
|
|
partition@1 {
|
|
label = "config";
|
|
reg = <0x00020000 0x00060000>;
|
|
};
|
|
partition@2 {
|
|
label = "log";
|
|
reg = <0x00080000 0x00040000>;
|
|
};
|
|
partition@3 {
|
|
label = "kernel";
|
|
reg = <0x000c0000 0x00200000>;
|
|
};
|
|
partition@4 {
|
|
label = "initfs";
|
|
reg = <0x002c0000 0x00200000>;
|
|
};
|
|
partition@5 {
|
|
label = "rootfs";
|
|
reg = <0x004c0000 0x0fb40000>;
|
|
};
|
|
};
|
|
|
|
/* Ethernet is on some early development boards and qemu */
|
|
ethernet@gpmc {
|
|
compatible = "smsc,lan91c94";
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
|
|
reg = <1 0 0xf>; /* 16 byte IO range */
|
|
bank-width = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ðernet_pins>;
|
|
power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
|
|
reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
|
|
gpmc,device-width = <2>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <48>;
|
|
gpmc,cs-wr-off-ns = <24>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <0>;
|
|
gpmc,adv-wr-off-ns = <0>;
|
|
gpmc,we-on-ns = <12>;
|
|
gpmc,we-off-ns = <18>;
|
|
gpmc,oe-on-ns = <12>;
|
|
gpmc,oe-off-ns = <48>;
|
|
gpmc,page-burst-access-ns = <0>;
|
|
gpmc,access-ns = <42>;
|
|
gpmc,rd-cycle-ns = <180>;
|
|
gpmc,wr-cycle-ns = <180>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wr-access-ns = <0>;
|
|
gpmc,wr-data-mux-bus-ns = <12>;
|
|
};
|
|
};
|
|
|
|
&mcspi1 {
|
|
/*
|
|
* For some reason, touchscreen is necessary for screen to work at
|
|
* all on real hw. It works well without it on emulator.
|
|
*
|
|
* Also... order in the device tree actually matters here.
|
|
*/
|
|
tsc2005@0 {
|
|
compatible = "ti,tsc2005";
|
|
spi-max-frequency = <6000000>;
|
|
reg = <0>;
|
|
|
|
vio-supply = <&vio>;
|
|
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
|
|
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
|
|
|
|
touchscreen-fuzz-x = <4>;
|
|
touchscreen-fuzz-y = <7>;
|
|
touchscreen-fuzz-pressure = <2>;
|
|
touchscreen-size-x = <4096>;
|
|
touchscreen-size-y = <4096>;
|
|
touchscreen-max-pressure = <2048>;
|
|
|
|
ti,x-plate-ohms = <280>;
|
|
ti,esd-recovery-timeout-ms = <8000>;
|
|
};
|
|
|
|
lcd: acx565akm@2 {
|
|
compatible = "sony,acx565akm";
|
|
spi-max-frequency = <6000000>;
|
|
reg = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&acx565akm_pins>;
|
|
|
|
label = "lcd";
|
|
reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
|
|
|
|
port {
|
|
lcd_in: endpoint {
|
|
remote-endpoint = <&sdi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mcspi4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi4_pins>;
|
|
|
|
wl1251@0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wl1251_pins>;
|
|
|
|
vio-supply = <&vio>;
|
|
|
|
compatible = "ti,wl1251";
|
|
reg = <0>;
|
|
spi-max-frequency = <48000000>;
|
|
|
|
spi-cpol;
|
|
spi-cpha;
|
|
|
|
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
|
|
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
|
|
|
|
clocks = <&vctcxo>;
|
|
};
|
|
};
|
|
|
|
/* RNG not directly accessible on n900, see omap3-rom-rng instead */
|
|
&rng_target {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_otg_hs {
|
|
interface-type = <0>;
|
|
usb-phy = <&usb2_phy>;
|
|
phys = <&usb2_phy>;
|
|
phy-names = "usb2-phy";
|
|
mode = <2>;
|
|
power = <50>;
|
|
};
|
|
|
|
&uart1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
|
|
bcm2048: bluetooth {
|
|
compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
|
|
reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
|
|
host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
|
|
bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
|
|
clocks = <&vctcxo>;
|
|
clock-names = "sysclk";
|
|
};
|
|
};
|
|
|
|
&uart3 {
|
|
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dss_sdi_pins>;
|
|
|
|
vdds_sdi-supply = <&vaux1>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
sdi_out: endpoint {
|
|
remote-endpoint = <&lcd_in>;
|
|
datapairs = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&venc {
|
|
status = "ok";
|
|
|
|
vdda-supply = <&vdac>;
|
|
|
|
port {
|
|
venc_out: endpoint {
|
|
remote-endpoint = <&tv_connector_in>;
|
|
ti,channels = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mcbsp2 {
|
|
status = "ok";
|
|
};
|
|
|
|
&ssi_port1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ssi_pins>;
|
|
|
|
ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
|
|
|
|
modem: hsi-client {
|
|
compatible = "nokia,n900-modem";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&modem_pins>;
|
|
|
|
hsi-channel-ids = <0>, <1>, <2>, <3>;
|
|
hsi-channel-names = "mcsaab-control",
|
|
"speech-control",
|
|
"speech-data",
|
|
"mcsaab-data";
|
|
hsi-speed-kbps = <55000>;
|
|
hsi-mode = "frame";
|
|
hsi-flow = "synchronized";
|
|
hsi-arb-mode = "round-robin";
|
|
|
|
interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
|
|
|
|
gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
|
|
<&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
|
|
<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
|
|
<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
|
|
<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
|
|
gpio-names = "cmt_apeslpx",
|
|
"cmt_rst_rq",
|
|
"cmt_en",
|
|
"cmt_rst",
|
|
"cmt_bsi";
|
|
};
|
|
};
|
|
|
|
&ssi_port2 {
|
|
status = "disabled";
|
|
};
|