mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-25 11:49:48 +07:00
dd656296c6
This is present in the AP6526 WiFi/Bluetooth 5.0 module. Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
44 lines
1.3 KiB
Plaintext
44 lines
1.3 KiB
Plaintext
Broadcom Bluetooth Chips
|
|
---------------------
|
|
|
|
This documents the binding structure and common properties for serial
|
|
attached Broadcom devices.
|
|
|
|
Serial attached Broadcom devices shall be a child node of the host UART
|
|
device the slave device is attached to.
|
|
|
|
Required properties:
|
|
|
|
- compatible: should contain one of the following:
|
|
* "brcm,bcm20702a1"
|
|
* "brcm,bcm4330-bt"
|
|
* "brcm,bcm43438-bt"
|
|
* "brcm,bcm4345c5"
|
|
|
|
Optional properties:
|
|
|
|
- max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
|
|
- shutdown-gpios: GPIO specifier, used to enable the BT module
|
|
- device-wakeup-gpios: GPIO specifier, used to wakeup the controller
|
|
- host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
|
|
- clocks: 1 or 2 clocks as defined in clock-names below, in that order
|
|
- clock-names: names for clock inputs, matching the clocks given
|
|
- "extclk": deprecated, replaced by "txco"
|
|
- "txco": external reference clock (not a standalone crystal)
|
|
- "lpo": external low power 32.768 kHz clock
|
|
- vbat-supply: phandle to regulator supply for VBAT
|
|
- vddio-supply: phandle to regulator supply for VDDIO
|
|
|
|
|
|
Example:
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
max-speed = <921600>;
|
|
};
|
|
};
|