mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 07:06:59 +07:00
7aa1aa6ece
ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
228 lines
5.6 KiB
C
228 lines
5.6 KiB
C
/*
|
|
* Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
|
|
*
|
|
* Author: Li Yang <LeoLi@freescale.com>
|
|
* Yin Olivia <Hong-hua.Yin@freescale.com>
|
|
*
|
|
* Description:
|
|
* MPC8360E MDS board specific routines.
|
|
*
|
|
* Changelog:
|
|
* Jun 21, 2006 Initial version
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/major.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/atomic.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/ipic.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/udbg.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
#include <sysdev/simple_gpio.h>
|
|
#include <soc/fsl/qe/qe.h>
|
|
#include <soc/fsl/qe/qe_ic.h>
|
|
|
|
#include "mpc83xx.h"
|
|
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
|
#define DBG(fmt...) udbg_printf(fmt)
|
|
#else
|
|
#define DBG(fmt...)
|
|
#endif
|
|
|
|
/* ************************************************************************
|
|
*
|
|
* Setup the architecture
|
|
*
|
|
*/
|
|
static void __init mpc836x_mds_setup_arch(void)
|
|
{
|
|
struct device_node *np;
|
|
u8 __iomem *bcsr_regs = NULL;
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc836x_mds_setup_arch()", 0);
|
|
|
|
/* Map BCSR area */
|
|
np = of_find_node_by_name(NULL, "bcsr");
|
|
if (np) {
|
|
struct resource res;
|
|
|
|
of_address_to_resource(np, 0, &res);
|
|
bcsr_regs = ioremap(res.start, resource_size(&res));
|
|
of_node_put(np);
|
|
}
|
|
|
|
mpc83xx_setup_pci();
|
|
|
|
#ifdef CONFIG_QUICC_ENGINE
|
|
if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
|
|
par_io_init(np);
|
|
of_node_put(np);
|
|
|
|
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
|
|
par_io_of_config(np);
|
|
#ifdef CONFIG_QE_USB
|
|
/* Must fixup Par IO before QE GPIO chips are registered. */
|
|
par_io_config_pin(1, 2, 1, 0, 3, 0); /* USBOE */
|
|
par_io_config_pin(1, 3, 1, 0, 3, 0); /* USBTP */
|
|
par_io_config_pin(1, 8, 1, 0, 1, 0); /* USBTN */
|
|
par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
|
|
par_io_config_pin(1, 9, 2, 1, 3, 0); /* USBRP */
|
|
par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN */
|
|
par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21 */
|
|
#endif /* CONFIG_QE_USB */
|
|
}
|
|
|
|
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
|
|
!= NULL){
|
|
uint svid;
|
|
|
|
/* Reset the Ethernet PHY */
|
|
#define BCSR9_GETHRST 0x20
|
|
clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
|
|
udelay(1000);
|
|
setbits8(&bcsr_regs[9], BCSR9_GETHRST);
|
|
|
|
/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
|
|
svid = mfspr(SPRN_SVR);
|
|
if (svid == 0x80480021) {
|
|
void __iomem *immap;
|
|
|
|
immap = ioremap(get_immrbase() + 0x14a8, 8);
|
|
|
|
/*
|
|
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
|
|
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
|
|
*/
|
|
setbits32(immap, 0x0c003000);
|
|
|
|
/*
|
|
* IMMR + 0x14AC[20:27] = 10101010
|
|
* (data delay for both UCC's)
|
|
*/
|
|
clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
|
|
|
|
iounmap(immap);
|
|
}
|
|
|
|
iounmap(bcsr_regs);
|
|
of_node_put(np);
|
|
}
|
|
#endif /* CONFIG_QUICC_ENGINE */
|
|
}
|
|
|
|
machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
|
|
|
|
#ifdef CONFIG_QE_USB
|
|
static int __init mpc836x_usb_cfg(void)
|
|
{
|
|
u8 __iomem *bcsr;
|
|
struct device_node *np;
|
|
const char *mode;
|
|
int ret = 0;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
bcsr = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
if (!bcsr)
|
|
return -ENOMEM;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
|
|
if (!np) {
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
#define BCSR8_TSEC1M_MASK (0x3 << 6)
|
|
#define BCSR8_TSEC1M_RGMII (0x0 << 6)
|
|
#define BCSR8_TSEC2M_MASK (0x3 << 4)
|
|
#define BCSR8_TSEC2M_RGMII (0x0 << 4)
|
|
/*
|
|
* Default is GMII (2), but we should set it to RGMII (0) if we use
|
|
* USB (Eth PHY is in RGMII mode anyway).
|
|
*/
|
|
clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
|
|
BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
|
|
|
|
#define BCSR13_USBMASK 0x0f
|
|
#define BCSR13_nUSBEN 0x08 /* 1 - Disable, 0 - Enable */
|
|
#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low */
|
|
#define BCSR13_USBMODE 0x02 /* 1 - Host, 0 - Function */
|
|
#define BCSR13_nUSBVCC 0x01 /* 1 - gets VBUS, 0 - supplies VBUS */
|
|
|
|
clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
|
|
|
|
mode = of_get_property(np, "mode", NULL);
|
|
if (mode && !strcmp(mode, "peripheral")) {
|
|
setbits8(&bcsr[13], BCSR13_nUSBVCC);
|
|
qe_usb_clock_set(QE_CLK21, 48000000);
|
|
} else {
|
|
setbits8(&bcsr[13], BCSR13_USBMODE);
|
|
/*
|
|
* The BCSR GPIOs are used to control power and
|
|
* speed of the USB transceiver. This is needed for
|
|
* the USB Host only.
|
|
*/
|
|
simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
|
|
}
|
|
|
|
of_node_put(np);
|
|
err:
|
|
iounmap(bcsr);
|
|
return ret;
|
|
}
|
|
machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
|
|
#endif /* CONFIG_QE_USB */
|
|
|
|
/*
|
|
* Called very early, MMU is off, device-tree isn't unflattened
|
|
*/
|
|
static int __init mpc836x_mds_probe(void)
|
|
{
|
|
unsigned long root = of_get_flat_dt_root();
|
|
|
|
return of_flat_dt_is_compatible(root, "MPC836xMDS");
|
|
}
|
|
|
|
define_machine(mpc836x_mds) {
|
|
.name = "MPC836x MDS",
|
|
.probe = mpc836x_mds_probe,
|
|
.setup_arch = mpc836x_mds_setup_arch,
|
|
.init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
|
|
.get_irq = ipic_get_irq,
|
|
.restart = mpc83xx_restart,
|
|
.time_init = mpc83xx_time_init,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
};
|