linux_dsm_epyc7002/drivers/ide/macide.c
Sergei Shtylyov f4d3ffa52a ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:58 +02:00

141 lines
3.0 KiB
C

/*
* Macintosh IDE Driver
*
* Copyright (C) 1998 by Michael Schmitz
*
* This driver was written based on information obtained from the MacOS IDE
* driver binary by Mikael Forselius
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_baboon.h>
#define IDE_BASE 0x50F1A000 /* Base address of IDE controller */
/*
* Generic IDE registers as offsets from the base
* These match MkLinux so they should be correct.
*/
#define IDE_CONTROL 0x38 /* control/altstatus */
/*
* Mac-specific registers
*/
/*
* this register is odd; it doesn't seem to do much and it's
* not word-aligned like virtually every other hardware register
* on the Mac...
*/
#define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra:
*
* Bit 0+1: some interrupt flags
* Bit 2+3: some interrupt enable
* Bit 4: ??
* Bit 5: IDE interrupt flag (any hwif)
* Bit 6: maybe IDE interrupt enable (any hwif) ??
* Bit 7: Any interrupt condition
*/
volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
int macide_test_irq(ide_hwif_t *hwif)
{
if (*ide_ifr & 0x20)
return 1;
return 0;
}
static void macide_clear_irq(ide_drive_t *drive)
{
*ide_ifr &= ~0x20;
}
static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
int irq)
{
int i;
memset(hw, 0, sizeof(*hw));
for (i = 0; i < 8; i++)
hw->io_ports_array[i] = base + i * 4;
hw->io_ports.ctl_addr = base + IDE_CONTROL;
hw->irq = irq;
}
static const struct ide_port_ops macide_port_ops = {
.clear_irq = macide_clear_irq,
.test_irq = macide_test_irq,
};
static const struct ide_port_info macide_port_info = {
.port_ops = &macide_port_ops,
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
.chipset = ide_generic,
};
static const char *mac_ide_name[] =
{ "Quadra", "Powerbook", "Powerbook Baboon" };
/*
* Probe for a Macintosh IDE interface
*/
static int __init macide_init(void)
{
unsigned long base;
int irq;
struct ide_hw hw, *hws[] = { &hw };
struct ide_port_info d = macide_port_info;
if (!MACH_IS_MAC)
return -ENODEV;
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
base = IDE_BASE;
irq = IRQ_NUBUS_F;
break;
case MAC_IDE_PB:
base = IDE_BASE;
irq = IRQ_NUBUS_C;
break;
case MAC_IDE_BABOON:
base = BABOON_BASE;
d.port_ops = NULL;
irq = IRQ_BABOON_1;
break;
default:
return -ENODEV;
}
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
macide_setup_ports(&hw, base, irq);
return ide_host_add(&d, hws, 1, NULL);
}
module_init(macide_init);
MODULE_LICENSE("GPL");