mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 06:16:46 +07:00
6996e7ff21
The Touch controller and LCD Panel share the same SPI bus 1. So, we need to define the touch controller in the SPI board info else, the SPI bus will be contended due to invalid state of Touch controller's Chip Select thus preventing the LCD panel from working. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
823 lines
21 KiB
C
823 lines
21 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-rx51-peripherals.c
|
|
*
|
|
* Copyright (C) 2008-2009 Nokia
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/wl12xx.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <plat/mcspi.h>
|
|
#include <plat/mux.h>
|
|
#include <plat/board.h>
|
|
#include <plat/common.h>
|
|
#include <plat/dma.h>
|
|
#include <plat/gpmc.h>
|
|
#include <plat/onenand.h>
|
|
#include <plat/gpmc-smc91x.h>
|
|
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
|
|
#define SYSTEM_REV_B_USES_VAUX3 0x1699
|
|
#define SYSTEM_REV_S_USES_VAUX3 0x8
|
|
|
|
#define RX51_WL1251_POWER_GPIO 87
|
|
#define RX51_WL1251_IRQ_GPIO 42
|
|
|
|
/* list all spi devices here */
|
|
enum {
|
|
RX51_SPI_WL1251,
|
|
RX51_SPI_MIPID, /* LCD panel */
|
|
RX51_SPI_TSC2005, /* Touch Controller */
|
|
};
|
|
|
|
static struct wl12xx_platform_data wl1251_pdata;
|
|
|
|
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
|
|
.turbo_mode = 0,
|
|
.single_channel = 1,
|
|
};
|
|
|
|
static struct omap2_mcspi_device_config mipid_mcspi_config = {
|
|
.turbo_mode = 0,
|
|
.single_channel = 1,
|
|
};
|
|
|
|
static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
|
|
.turbo_mode = 0,
|
|
.single_channel = 1,
|
|
};
|
|
|
|
static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
|
|
[RX51_SPI_WL1251] = {
|
|
.modalias = "wl1251",
|
|
.bus_num = 4,
|
|
.chip_select = 0,
|
|
.max_speed_hz = 48000000,
|
|
.mode = SPI_MODE_3,
|
|
.controller_data = &wl1251_mcspi_config,
|
|
.platform_data = &wl1251_pdata,
|
|
},
|
|
[RX51_SPI_MIPID] = {
|
|
.modalias = "acx565akm",
|
|
.bus_num = 1,
|
|
.chip_select = 2,
|
|
.max_speed_hz = 6000000,
|
|
.controller_data = &mipid_mcspi_config,
|
|
},
|
|
[RX51_SPI_TSC2005] = {
|
|
.modalias = "tsc2005",
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
/* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
|
|
.max_speed_hz = 6000000,
|
|
.controller_data = &tsc2005_mcspi_config,
|
|
/* .platform_data = &tsc2005_config,*/
|
|
},
|
|
};
|
|
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
|
|
#define RX51_GPIO_CAMERA_LENS_COVER 110
|
|
#define RX51_GPIO_CAMERA_FOCUS 68
|
|
#define RX51_GPIO_CAMERA_CAPTURE 69
|
|
#define RX51_GPIO_KEYPAD_SLIDE 71
|
|
#define RX51_GPIO_LOCK_BUTTON 113
|
|
#define RX51_GPIO_PROXIMITY 89
|
|
|
|
#define RX51_GPIO_DEBOUNCE_TIMEOUT 10
|
|
|
|
static struct gpio_keys_button rx51_gpio_keys[] = {
|
|
{
|
|
.desc = "Camera Lens Cover",
|
|
.type = EV_SW,
|
|
.code = SW_CAMERA_LENS_COVER,
|
|
.gpio = RX51_GPIO_CAMERA_LENS_COVER,
|
|
.active_low = 1,
|
|
.debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
|
|
}, {
|
|
.desc = "Camera Focus",
|
|
.type = EV_KEY,
|
|
.code = KEY_CAMERA_FOCUS,
|
|
.gpio = RX51_GPIO_CAMERA_FOCUS,
|
|
.active_low = 1,
|
|
.debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
|
|
}, {
|
|
.desc = "Camera Capture",
|
|
.type = EV_KEY,
|
|
.code = KEY_CAMERA,
|
|
.gpio = RX51_GPIO_CAMERA_CAPTURE,
|
|
.active_low = 1,
|
|
.debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
|
|
}, {
|
|
.desc = "Lock Button",
|
|
.type = EV_KEY,
|
|
.code = KEY_SCREENLOCK,
|
|
.gpio = RX51_GPIO_LOCK_BUTTON,
|
|
.active_low = 1,
|
|
.debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
|
|
}, {
|
|
.desc = "Keypad Slide",
|
|
.type = EV_SW,
|
|
.code = SW_KEYPAD_SLIDE,
|
|
.gpio = RX51_GPIO_KEYPAD_SLIDE,
|
|
.active_low = 1,
|
|
.debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
|
|
}, {
|
|
.desc = "Proximity Sensor",
|
|
.type = EV_SW,
|
|
.code = SW_FRONT_PROXIMITY,
|
|
.gpio = RX51_GPIO_PROXIMITY,
|
|
.active_low = 0,
|
|
.debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_platform_data rx51_gpio_keys_data = {
|
|
.buttons = rx51_gpio_keys,
|
|
.nbuttons = ARRAY_SIZE(rx51_gpio_keys),
|
|
};
|
|
|
|
static struct platform_device rx51_gpio_keys_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &rx51_gpio_keys_data,
|
|
},
|
|
};
|
|
|
|
static void __init rx51_add_gpio_keys(void)
|
|
{
|
|
platform_device_register(&rx51_gpio_keys_device);
|
|
}
|
|
#else
|
|
static void __init rx51_add_gpio_keys(void)
|
|
{
|
|
}
|
|
#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
|
|
|
|
static int board_keymap[] = {
|
|
KEY(0, 0, KEY_Q),
|
|
KEY(0, 1, KEY_O),
|
|
KEY(0, 2, KEY_P),
|
|
KEY(0, 3, KEY_COMMA),
|
|
KEY(0, 4, KEY_BACKSPACE),
|
|
KEY(0, 6, KEY_A),
|
|
KEY(0, 7, KEY_S),
|
|
KEY(1, 0, KEY_W),
|
|
KEY(1, 1, KEY_D),
|
|
KEY(1, 2, KEY_F),
|
|
KEY(1, 3, KEY_G),
|
|
KEY(1, 4, KEY_H),
|
|
KEY(1, 5, KEY_J),
|
|
KEY(1, 6, KEY_K),
|
|
KEY(1, 7, KEY_L),
|
|
KEY(2, 0, KEY_E),
|
|
KEY(2, 1, KEY_DOT),
|
|
KEY(2, 2, KEY_UP),
|
|
KEY(2, 3, KEY_ENTER),
|
|
KEY(2, 5, KEY_Z),
|
|
KEY(2, 6, KEY_X),
|
|
KEY(2, 7, KEY_C),
|
|
KEY(3, 0, KEY_R),
|
|
KEY(3, 1, KEY_V),
|
|
KEY(3, 2, KEY_B),
|
|
KEY(3, 3, KEY_N),
|
|
KEY(3, 4, KEY_M),
|
|
KEY(3, 5, KEY_SPACE),
|
|
KEY(3, 6, KEY_SPACE),
|
|
KEY(3, 7, KEY_LEFT),
|
|
KEY(4, 0, KEY_T),
|
|
KEY(4, 1, KEY_DOWN),
|
|
KEY(4, 2, KEY_RIGHT),
|
|
KEY(4, 4, KEY_LEFTCTRL),
|
|
KEY(4, 5, KEY_RIGHTALT),
|
|
KEY(4, 6, KEY_LEFTSHIFT),
|
|
KEY(5, 0, KEY_Y),
|
|
KEY(6, 0, KEY_U),
|
|
KEY(7, 0, KEY_I),
|
|
KEY(7, 1, KEY_F7),
|
|
KEY(7, 2, KEY_F8),
|
|
KEY(0xff, 2, KEY_F9),
|
|
KEY(0xff, 4, KEY_F10),
|
|
KEY(0xff, 5, KEY_F11),
|
|
};
|
|
|
|
static struct matrix_keymap_data board_map_data = {
|
|
.keymap = board_keymap,
|
|
.keymap_size = ARRAY_SIZE(board_keymap),
|
|
};
|
|
|
|
static struct twl4030_keypad_data rx51_kp_data = {
|
|
.keymap_data = &board_map_data,
|
|
.rows = 8,
|
|
.cols = 8,
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct twl4030_madc_platform_data rx51_madc_data = {
|
|
.irq_line = 1,
|
|
};
|
|
|
|
/* Enable input logic and pull all lines up when eMMC is on. */
|
|
static struct omap_board_mux rx51_mmc2_on_mux[] = {
|
|
OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
|
|
/* Disable input logic and pull all lines down when eMMC is off. */
|
|
static struct omap_board_mux rx51_mmc2_off_mux[] = {
|
|
OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
|
|
/*
|
|
* Current flows to eMMC when eMMC is off and the data lines are pulled up,
|
|
* so pull them down. N.B. we pull 8 lines because we are using 8 lines.
|
|
*/
|
|
static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
|
|
{
|
|
if (power_on)
|
|
omap_mux_write_array(rx51_mmc2_on_mux);
|
|
else
|
|
omap_mux_write_array(rx51_mmc2_off_mux);
|
|
}
|
|
|
|
static struct omap2_hsmmc_info mmc[] __initdata = {
|
|
{
|
|
.name = "external",
|
|
.mmc = 1,
|
|
.wires = 4,
|
|
.cover_only = true,
|
|
.gpio_cd = 160,
|
|
.gpio_wp = -EINVAL,
|
|
.power_saving = true,
|
|
},
|
|
{
|
|
.name = "internal",
|
|
.mmc = 2,
|
|
.wires = 8, /* See also rx51_mmc2_remux */
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.nonremovable = true,
|
|
.power_saving = true,
|
|
.remux = rx51_mmc2_remux,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct regulator_consumer_supply rx51_vmmc1_supply = {
|
|
.supply = "vmmc",
|
|
.dev_name = "mmci-omap-hs.0",
|
|
};
|
|
|
|
static struct regulator_consumer_supply rx51_vmmc2_supply = {
|
|
.supply = "vmmc",
|
|
.dev_name = "mmci-omap-hs.1",
|
|
};
|
|
|
|
static struct regulator_consumer_supply rx51_vsim_supply = {
|
|
.supply = "vmmc_aux",
|
|
.dev_name = "mmci-omap-hs.1",
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vaux1 = {
|
|
.constraints = {
|
|
.name = "V28",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vaux2 = {
|
|
.constraints = {
|
|
.name = "VCSI",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
/* VAUX3 - adds more power to VIO_18 rail */
|
|
static struct regulator_init_data rx51_vaux3_cam = {
|
|
.constraints = {
|
|
.name = "VCAM_DIG_18",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vaux3_mmc = {
|
|
.constraints = {
|
|
.name = "VMMC2_30",
|
|
.min_uV = 2800000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &rx51_vmmc2_supply,
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vaux4 = {
|
|
.constraints = {
|
|
.name = "VCAM_ANA_28",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &rx51_vmmc1_supply,
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vmmc2 = {
|
|
.constraints = {
|
|
.name = "VMMC2_30",
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &rx51_vmmc2_supply,
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vsim = {
|
|
.constraints = {
|
|
.name = "VMMC2_IO_18",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &rx51_vsim_supply,
|
|
};
|
|
|
|
static struct regulator_init_data rx51_vdac = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
|
|
{
|
|
/* FIXME this gpio setup is just a placeholder for now */
|
|
gpio_request(gpio + 6, "backlight_pwm");
|
|
gpio_direction_output(gpio + 6, 0);
|
|
gpio_request(gpio + 7, "speaker_en");
|
|
gpio_direction_output(gpio + 7, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct twl4030_gpio_platform_data rx51_gpio_data = {
|
|
.gpio_base = OMAP_MAX_GPIO_LINES,
|
|
.irq_base = TWL4030_GPIO_IRQ_BASE,
|
|
.irq_end = TWL4030_GPIO_IRQ_END,
|
|
.pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
|
|
| BIT(4) | BIT(5)
|
|
| BIT(8) | BIT(9) | BIT(10) | BIT(11)
|
|
| BIT(12) | BIT(13) | BIT(14) | BIT(15)
|
|
| BIT(16) | BIT(17) ,
|
|
.setup = rx51_twlgpio_setup,
|
|
};
|
|
|
|
static struct twl4030_usb_data rx51_usb_data = {
|
|
.usb_mode = T2_USB_MODE_ULPI,
|
|
};
|
|
|
|
static struct twl4030_ins sleep_on_seq[] __initdata = {
|
|
/*
|
|
* Turn off everything
|
|
*/
|
|
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
|
|
};
|
|
|
|
static struct twl4030_script sleep_on_script __initdata = {
|
|
.script = sleep_on_seq,
|
|
.size = ARRAY_SIZE(sleep_on_seq),
|
|
.flags = TWL4030_SLEEP_SCRIPT,
|
|
};
|
|
|
|
static struct twl4030_ins wakeup_seq[] __initdata = {
|
|
/*
|
|
* Reenable everything
|
|
*/
|
|
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
|
|
};
|
|
|
|
static struct twl4030_script wakeup_script __initdata = {
|
|
.script = wakeup_seq,
|
|
.size = ARRAY_SIZE(wakeup_seq),
|
|
.flags = TWL4030_WAKEUP12_SCRIPT,
|
|
};
|
|
|
|
static struct twl4030_ins wakeup_p3_seq[] __initdata = {
|
|
/*
|
|
* Reenable everything
|
|
*/
|
|
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
|
|
};
|
|
|
|
static struct twl4030_script wakeup_p3_script __initdata = {
|
|
.script = wakeup_p3_seq,
|
|
.size = ARRAY_SIZE(wakeup_p3_seq),
|
|
.flags = TWL4030_WAKEUP3_SCRIPT,
|
|
};
|
|
|
|
static struct twl4030_ins wrst_seq[] __initdata = {
|
|
/*
|
|
* Reset twl4030.
|
|
* Reset VDD1 regulator.
|
|
* Reset VDD2 regulator.
|
|
* Reset VPLL1 regulator.
|
|
* Enable sysclk output.
|
|
* Reenable twl4030.
|
|
*/
|
|
{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
|
|
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
|
|
0x13},
|
|
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
|
|
{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
|
|
{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
|
|
{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
|
|
{MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
|
|
{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
|
|
};
|
|
|
|
static struct twl4030_script wrst_script __initdata = {
|
|
.script = wrst_seq,
|
|
.size = ARRAY_SIZE(wrst_seq),
|
|
.flags = TWL4030_WRST_SCRIPT,
|
|
};
|
|
|
|
static struct twl4030_script *twl4030_scripts[] __initdata = {
|
|
/* wakeup12 script should be loaded before sleep script, otherwise a
|
|
board might hit retention before loading of wakeup script is
|
|
completed. This can cause boot failures depending on timing issues.
|
|
*/
|
|
&wakeup_script,
|
|
&sleep_on_script,
|
|
&wakeup_p3_script,
|
|
&wrst_script,
|
|
};
|
|
|
|
static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
|
|
{ .resource = RES_VDD1, .devgroup = -1,
|
|
.type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
|
|
.remap_sleep = RES_STATE_OFF
|
|
},
|
|
{ .resource = RES_VDD2, .devgroup = -1,
|
|
.type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
|
|
.remap_sleep = RES_STATE_OFF
|
|
},
|
|
{ .resource = RES_VPLL1, .devgroup = -1,
|
|
.type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
|
|
.remap_sleep = RES_STATE_OFF
|
|
},
|
|
{ .resource = RES_VPLL2, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VAUX1, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VAUX2, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VAUX3, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VAUX4, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VMMC1, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VMMC2, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VDAC, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VSIM, .devgroup = -1,
|
|
.type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
|
|
.type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
|
|
.type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_VIO, .devgroup = DEV_GRP_P3,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
|
|
.type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_32KCLKOUT, .devgroup = -1,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_RESET, .devgroup = -1,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ .resource = RES_Main_Ref, .devgroup = -1,
|
|
.type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
|
|
},
|
|
{ 0, 0},
|
|
};
|
|
|
|
static struct twl4030_power_data rx51_t2scripts_data __initdata = {
|
|
.scripts = twl4030_scripts,
|
|
.num = ARRAY_SIZE(twl4030_scripts),
|
|
.resource_config = twl4030_rconfig,
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_platform_data rx51_twldata __initdata = {
|
|
.irq_base = TWL4030_IRQ_BASE,
|
|
.irq_end = TWL4030_IRQ_END,
|
|
|
|
/* platform_data for children goes here */
|
|
.gpio = &rx51_gpio_data,
|
|
.keypad = &rx51_kp_data,
|
|
.madc = &rx51_madc_data,
|
|
.usb = &rx51_usb_data,
|
|
.power = &rx51_t2scripts_data,
|
|
|
|
.vaux1 = &rx51_vaux1,
|
|
.vaux2 = &rx51_vaux2,
|
|
.vaux4 = &rx51_vaux4,
|
|
.vmmc1 = &rx51_vmmc1,
|
|
.vsim = &rx51_vsim,
|
|
.vdac = &rx51_vdac,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
|
|
{
|
|
I2C_BOARD_INFO("twl5030", 0x48),
|
|
.flags = I2C_CLIENT_WAKE,
|
|
.irq = INT_34XX_SYS_NIRQ,
|
|
.platform_data = &rx51_twldata,
|
|
},
|
|
};
|
|
|
|
static int __init rx51_i2c_init(void)
|
|
{
|
|
if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
|
|
system_rev >= SYSTEM_REV_B_USES_VAUX3)
|
|
rx51_twldata.vaux3 = &rx51_vaux3_mmc;
|
|
else {
|
|
rx51_twldata.vaux3 = &rx51_vaux3_cam;
|
|
rx51_twldata.vmmc2 = &rx51_vmmc2;
|
|
}
|
|
omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
|
|
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
|
|
omap_register_i2c_bus(2, 100, NULL, 0);
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
|
|
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
|
|
|
|
static struct mtd_partition onenand_partitions[] = {
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = 0x20000,
|
|
.mask_flags = MTD_WRITEABLE, /* Force read-only */
|
|
},
|
|
{
|
|
.name = "config",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 0x60000,
|
|
},
|
|
{
|
|
.name = "log",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 0x40000,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 0x200000,
|
|
},
|
|
{
|
|
.name = "initfs",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 0x200000,
|
|
},
|
|
{
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct omap_onenand_platform_data board_onenand_data = {
|
|
.cs = 0,
|
|
.gpio_irq = 65,
|
|
.parts = onenand_partitions,
|
|
.nr_parts = ARRAY_SIZE(onenand_partitions),
|
|
.flags = ONENAND_SYNC_READWRITE,
|
|
};
|
|
|
|
static void __init board_onenand_init(void)
|
|
{
|
|
gpmc_onenand_init(&board_onenand_data);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void board_onenand_init(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
|
|
|
|
static struct omap_smc91x_platform_data board_smc91x_data = {
|
|
.cs = 1,
|
|
.gpio_irq = 54,
|
|
.gpio_pwrdwn = 86,
|
|
.gpio_reset = 164,
|
|
.flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
|
|
};
|
|
|
|
static void __init board_smc91x_init(void)
|
|
{
|
|
omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
|
|
omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
|
|
|
|
gpmc_smc91x_init(&board_smc91x_data);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void board_smc91x_init(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static void rx51_wl1251_set_power(bool enable)
|
|
{
|
|
gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
|
|
}
|
|
|
|
static void __init rx51_init_wl1251(void)
|
|
{
|
|
int irq, ret;
|
|
|
|
ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
|
|
if (ret < 0)
|
|
goto err_power;
|
|
|
|
ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
|
|
if (ret < 0)
|
|
goto err_power;
|
|
|
|
ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
|
|
if (ret < 0)
|
|
goto err_irq;
|
|
|
|
irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
|
|
if (irq < 0)
|
|
goto err_irq;
|
|
|
|
wl1251_pdata.set_power = rx51_wl1251_set_power;
|
|
rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
|
|
|
|
return;
|
|
|
|
err_irq:
|
|
gpio_free(RX51_WL1251_IRQ_GPIO);
|
|
|
|
err_power:
|
|
gpio_free(RX51_WL1251_POWER_GPIO);
|
|
|
|
error:
|
|
printk(KERN_ERR "wl1251 board initialisation failed\n");
|
|
wl1251_pdata.set_power = NULL;
|
|
|
|
/*
|
|
* Now rx51_peripherals_spi_board_info[1].irq is zero and
|
|
* set_power is null, and wl1251_probe() will fail.
|
|
*/
|
|
}
|
|
|
|
void __init rx51_peripherals_init(void)
|
|
{
|
|
rx51_i2c_init();
|
|
board_onenand_init();
|
|
board_smc91x_init();
|
|
rx51_add_gpio_keys();
|
|
rx51_init_wl1251();
|
|
spi_register_board_info(rx51_peripherals_spi_board_info,
|
|
ARRAY_SIZE(rx51_peripherals_spi_board_info));
|
|
omap2_hsmmc_init(mmc);
|
|
}
|
|
|