mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:36:45 +07:00
d2912cb15b
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
268 lines
6.5 KiB
C
268 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI tlc4541 ADC Driver
|
|
*
|
|
* Copyright (C) 2017 Phil Reid
|
|
*
|
|
* Datasheets can be found here:
|
|
* http://www.ti.com/lit/gpn/tlc3541
|
|
* http://www.ti.com/lit/gpn/tlc4541
|
|
*
|
|
* The tlc4541 requires 24 clock cycles to start a transfer.
|
|
* Conversion then takes 2.94us to complete before data is ready
|
|
* Data is returned MSB first.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
struct tlc4541_state {
|
|
struct spi_device *spi;
|
|
struct regulator *reg;
|
|
struct spi_transfer scan_single_xfer[3];
|
|
struct spi_message scan_single_msg;
|
|
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
* 2 bytes data + 6 bytes padding + 8 bytes timestamp when
|
|
* call iio_push_to_buffers_with_timestamp.
|
|
*/
|
|
__be16 rx_buf[8] ____cacheline_aligned;
|
|
};
|
|
|
|
struct tlc4541_chip_info {
|
|
const struct iio_chan_spec *channels;
|
|
unsigned int num_channels;
|
|
};
|
|
|
|
enum tlc4541_id {
|
|
TLC3541,
|
|
TLC4541,
|
|
};
|
|
|
|
#define TLC4541_V_CHAN(bits, bitshift) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = (bits), \
|
|
.storagebits = 16, \
|
|
.shift = (bitshift), \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
#define DECLARE_TLC4541_CHANNELS(name, bits, bitshift) \
|
|
const struct iio_chan_spec name ## _channels[] = { \
|
|
TLC4541_V_CHAN(bits, bitshift), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(1), \
|
|
}
|
|
|
|
static DECLARE_TLC4541_CHANNELS(tlc3541, 14, 2);
|
|
static DECLARE_TLC4541_CHANNELS(tlc4541, 16, 0);
|
|
|
|
static const struct tlc4541_chip_info tlc4541_chip_info[] = {
|
|
[TLC3541] = {
|
|
.channels = tlc3541_channels,
|
|
.num_channels = ARRAY_SIZE(tlc3541_channels),
|
|
},
|
|
[TLC4541] = {
|
|
.channels = tlc4541_channels,
|
|
.num_channels = ARRAY_SIZE(tlc4541_channels),
|
|
},
|
|
};
|
|
|
|
static irqreturn_t tlc4541_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct tlc4541_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int tlc4541_get_range(struct tlc4541_state *st)
|
|
{
|
|
int vref;
|
|
|
|
vref = regulator_get_voltage(st->reg);
|
|
if (vref < 0)
|
|
return vref;
|
|
|
|
vref /= 1000;
|
|
|
|
return vref;
|
|
}
|
|
|
|
static int tlc4541_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
int ret = 0;
|
|
struct tlc4541_state *st = iio_priv(indio_dev);
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = be16_to_cpu(st->rx_buf[0]);
|
|
*val = *val >> chan->scan_type.shift;
|
|
*val &= GENMASK(chan->scan_type.realbits - 1, 0);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = tlc4541_get_range(st);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info tlc4541_info = {
|
|
.read_raw = &tlc4541_read_raw,
|
|
};
|
|
|
|
static int tlc4541_probe(struct spi_device *spi)
|
|
{
|
|
struct tlc4541_state *st;
|
|
struct iio_dev *indio_dev;
|
|
const struct tlc4541_chip_info *info;
|
|
int ret;
|
|
int8_t device_init = 0;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
st->spi = spi;
|
|
|
|
info = &tlc4541_chip_info[spi_get_device_id(spi)->driver_data];
|
|
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = info->channels;
|
|
indio_dev->num_channels = info->num_channels;
|
|
indio_dev->info = &tlc4541_info;
|
|
|
|
/* perform reset */
|
|
spi_write(spi, &device_init, 1);
|
|
|
|
/* Setup default message */
|
|
st->scan_single_xfer[0].rx_buf = &st->rx_buf[0];
|
|
st->scan_single_xfer[0].len = 3;
|
|
st->scan_single_xfer[1].delay_usecs = 3;
|
|
st->scan_single_xfer[2].rx_buf = &st->rx_buf[0];
|
|
st->scan_single_xfer[2].len = 2;
|
|
|
|
spi_message_init_with_transfers(&st->scan_single_msg,
|
|
st->scan_single_xfer, 3);
|
|
|
|
st->reg = devm_regulator_get(&spi->dev, "vref");
|
|
if (IS_ERR(st->reg))
|
|
return PTR_ERR(st->reg);
|
|
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
&tlc4541_trigger_handler, NULL);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_cleanup_buffer;
|
|
|
|
return 0;
|
|
|
|
error_cleanup_buffer:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
error_disable_reg:
|
|
regulator_disable(st->reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tlc4541_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct tlc4541_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
regulator_disable(st->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id tlc4541_dt_ids[] = {
|
|
{ .compatible = "ti,tlc3541", },
|
|
{ .compatible = "ti,tlc4541", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tlc4541_dt_ids);
|
|
#endif
|
|
|
|
static const struct spi_device_id tlc4541_id[] = {
|
|
{"tlc3541", TLC3541},
|
|
{"tlc4541", TLC4541},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, tlc4541_id);
|
|
|
|
static struct spi_driver tlc4541_driver = {
|
|
.driver = {
|
|
.name = "tlc4541",
|
|
.of_match_table = of_match_ptr(tlc4541_dt_ids),
|
|
},
|
|
.probe = tlc4541_probe,
|
|
.remove = tlc4541_remove,
|
|
.id_table = tlc4541_id,
|
|
};
|
|
module_spi_driver(tlc4541_driver);
|
|
|
|
MODULE_AUTHOR("Phil Reid <preid@electromag.com.au>");
|
|
MODULE_DESCRIPTION("Texas Instruments TLC4541 ADC");
|
|
MODULE_LICENSE("GPL v2");
|