mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 15:55:12 +07:00
3a7c01d75f
The Odroid XU3 Lite is almost the same as XU3, except: 1. Lower CPU frequencies (1.8 GHz for A15 and 1.3 GHz for A7, instead of 2.0 GHz and 1.4 GHz). 2. No DisplayPort. 3. No TI INA231 energy measurement sensors. This patch moves common nodes (which is almost everything) to a common DTSI file and adds a new XU3 Lite DTS. Currently in comparison to XU3, only the INA231 sensors are disabled to remove the warning: ina2xx 0-0040: error configuring the device: -6 Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
480 lines
10 KiB
Plaintext
480 lines
10 KiB
Plaintext
/*
|
|
* Hardkernel Odroid XU3 board device tree source
|
|
*
|
|
* Copyright (c) 2014 Collabora Ltd.
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/sound/samsung-i2s.h>
|
|
#include "exynos5800.dtsi"
|
|
|
|
/ {
|
|
memory {
|
|
reg = <0x40000000 0x7EA00000>;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &serial_2;
|
|
};
|
|
|
|
firmware@02073000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x02073000 0x1000>;
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
oscclk {
|
|
compatible = "samsung,exynos5420-oscclk";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
emmc_pwrseq: pwrseq {
|
|
pinctrl-0 = <&emmc_nrst_pin>;
|
|
pinctrl-names = "default";
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpd1 0 1>;
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
|
|
greenled {
|
|
label = "green:mmc0";
|
|
pwms = <&pwm 1 2000000 0>;
|
|
pwm-names = "pwm1";
|
|
/*
|
|
* Green LED is much brighter than the others
|
|
* so limit its max brightness
|
|
*/
|
|
max_brightness = <127>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
blueled {
|
|
label = "blue:heartbeat";
|
|
pwms = <&pwm 2 2000000 0>;
|
|
pwm-names = "pwm2";
|
|
max_brightness = <255>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
gpioleds {
|
|
compatible = "gpio-leds";
|
|
redled {
|
|
label = "red:microSD";
|
|
gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
linux,default-trigger = "mmc1";
|
|
};
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "simple-audio-card";
|
|
|
|
simple-audio-card,name = "Odroid-XU3";
|
|
simple-audio-card,widgets =
|
|
"Headphone", "Headphone Jack",
|
|
"Speakers", "Speakers";
|
|
simple-audio-card,routing =
|
|
"Headphone Jack", "HPL",
|
|
"Headphone Jack", "HPR",
|
|
"Headphone Jack", "MICBIAS",
|
|
"IN1", "Headphone Jack",
|
|
"Speakers", "SPKL",
|
|
"Speakers", "SPKR";
|
|
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&link0_codec>;
|
|
simple-audio-card,frame-master = <&link0_codec>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0 0>;
|
|
system-clock-frequency = <19200000>;
|
|
};
|
|
|
|
link0_codec: simple-audio-card,codec {
|
|
sound-dai = <&max98090>;
|
|
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&clock_audss {
|
|
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
|
|
<&clock_audss EXYNOS_MOUT_I2S>,
|
|
<&clock_audss EXYNOS_DOUT_AUD_BUS>;
|
|
assigned-clock-parents = <&clock CLK_FIN_PLL>,
|
|
<&clock_audss EXYNOS_MOUT_AUDSS>;
|
|
assigned-clock-rates = <0>,
|
|
<0>,
|
|
<19200000>;
|
|
};
|
|
|
|
&fimd {
|
|
status = "okay";
|
|
};
|
|
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
hpd-gpio = <&gpx3 7 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_hpd_irq>;
|
|
|
|
vdd_osc-supply = <&ldo7_reg>;
|
|
vdd_pll-supply = <&ldo6_reg>;
|
|
vdd-supply = <&ldo6_reg>;
|
|
};
|
|
|
|
&hsi2c_4 {
|
|
status = "okay";
|
|
|
|
s2mps11_pmic@66 {
|
|
compatible = "samsung,s2mps11-pmic";
|
|
reg = <0x66>;
|
|
s2mps11,buck2-ramp-delay = <12>;
|
|
s2mps11,buck34-ramp-delay = <12>;
|
|
s2mps11,buck16-ramp-delay = <12>;
|
|
s2mps11,buck6-ramp-enable = <1>;
|
|
s2mps11,buck2-ramp-enable = <1>;
|
|
s2mps11,buck3-ramp-enable = <1>;
|
|
s2mps11,buck4-ramp-enable = <1>;
|
|
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&s2mps11_irq>;
|
|
|
|
s2mps11_osc: clocks {
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps11_ap",
|
|
"s2mps11_cp", "s2mps11_bt";
|
|
};
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "vdd_ldo1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "vdd_ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "vdd_ldo5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "vdd_ldo6";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "vdd_ldo7";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "vdd_ldo8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "vdd_ldo9";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "vdd_ldo10";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "vdd_ldo11";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "vdd_ldo12";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "vdd_ldo13";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "vdd_ldo15";
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "vdd_ldo16";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "tsp_avdd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "vdd_sd";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "tsp_io";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "vdd_ldo26";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "vdd_mem";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "vdd_kfc";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "vdd_1.0v_ldo";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "vdd_1.8v_ldo";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "vdd_2.8v_ldo";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3750000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck10_reg: BUCK10 {
|
|
regulator-name = "vdd_vmem";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_5 {
|
|
status = "okay";
|
|
max98090: max98090@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 0>;
|
|
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
|
clock-names = "mclk";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c_2 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
status = "okay";
|
|
|
|
hdmiddc@50 {
|
|
compatible = "samsung,exynos4210-hdmiddc";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mfc {
|
|
samsung,mfc-r = <0x43000000 0x800000>;
|
|
samsung,mfc-l = <0x51000000 0x800000>;
|
|
};
|
|
|
|
&mmc_0 {
|
|
status = "okay";
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
samsung,dw-mshc-hs400-timing = <0 2>;
|
|
samsung,read-strobe-delay = <90>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
};
|
|
|
|
&mmc_2 {
|
|
status = "okay";
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
};
|
|
|
|
&pinctrl_0 {
|
|
hdmi_hpd_irq: hdmi-hpd-irq {
|
|
samsung,pins = "gpx3-7";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <1>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
s2mps11_irq: s2mps11-irq {
|
|
samsung,pins = "gpx0-4";
|
|
samsung,pin-function = <0xf>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
emmc_nrst_pin: emmc-nrst {
|
|
samsung,pins = "gpd1-0";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
/*
|
|
* PWM 0 -- fan
|
|
* PWM 1 -- Green LED
|
|
* PWM 2 -- Blue LED
|
|
* PWM 3 -- on MIPI connector for backlight
|
|
*/
|
|
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "otg";
|
|
};
|