linux_dsm_epyc7002/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
Zhang Shengju 690291093a mlx4: use reset to set mac header
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add
operation in set function.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03 15:49:16 -05:00

211 lines
5.7 KiB
C

/*
* Copyright (c) 2007 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#include <linux/kernel.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/mlx4/driver.h>
#include "mlx4_en.h"
static int mlx4_en_test_registers(struct mlx4_en_priv *priv)
{
return mlx4_cmd(priv->mdev->dev, 0, 0, 0, MLX4_CMD_HW_HEALTH_CHECK,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
}
static int mlx4_en_test_loopback_xmit(struct mlx4_en_priv *priv)
{
struct sk_buff *skb;
struct ethhdr *ethh;
unsigned char *packet;
unsigned int packet_size = MLX4_LOOPBACK_TEST_PAYLOAD;
unsigned int i;
int err;
/* build the pkt before xmit */
skb = netdev_alloc_skb(priv->dev, MLX4_LOOPBACK_TEST_PAYLOAD + ETH_HLEN + NET_IP_ALIGN);
if (!skb)
return -ENOMEM;
skb_reserve(skb, NET_IP_ALIGN);
ethh = (struct ethhdr *)skb_put(skb, sizeof(struct ethhdr));
packet = (unsigned char *)skb_put(skb, packet_size);
memcpy(ethh->h_dest, priv->dev->dev_addr, ETH_ALEN);
eth_zero_addr(ethh->h_source);
ethh->h_proto = htons(ETH_P_ARP);
skb_reset_mac_header(skb);
for (i = 0; i < packet_size; ++i) /* fill our packet */
packet[i] = (unsigned char)(i & 0xff);
/* xmit the pkt */
err = mlx4_en_xmit(skb, priv->dev);
return err;
}
static int mlx4_en_test_loopback(struct mlx4_en_priv *priv)
{
u32 loopback_ok = 0;
int i;
bool gro_enabled;
priv->loopback_ok = 0;
priv->validate_loopback = 1;
gro_enabled = priv->dev->features & NETIF_F_GRO;
mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
priv->dev->features &= ~NETIF_F_GRO;
/* xmit */
if (mlx4_en_test_loopback_xmit(priv)) {
en_err(priv, "Transmitting loopback packet failed\n");
goto mlx4_en_test_loopback_exit;
}
/* polling for result */
for (i = 0; i < MLX4_EN_LOOPBACK_RETRIES; ++i) {
msleep(MLX4_EN_LOOPBACK_TIMEOUT);
if (priv->loopback_ok) {
loopback_ok = 1;
break;
}
}
if (!loopback_ok)
en_err(priv, "Loopback packet didn't arrive\n");
mlx4_en_test_loopback_exit:
priv->validate_loopback = 0;
if (gro_enabled)
priv->dev->features |= NETIF_F_GRO;
mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
return !loopback_ok;
}
static int mlx4_en_test_interrupts(struct mlx4_en_priv *priv)
{
struct mlx4_en_dev *mdev = priv->mdev;
int err = 0;
int i = 0;
err = mlx4_test_async(mdev->dev);
/* When not in MSI_X or slave, test only async */
if (!(mdev->dev->flags & MLX4_FLAG_MSI_X) || mlx4_is_slave(mdev->dev))
return err;
/* A loop over all completion vectors of current port,
* for each vector check whether it works by mapping command
* completions to that vector and performing a NOP command
*/
for (i = 0; i < priv->rx_ring_num; i++) {
err = mlx4_test_interrupt(mdev->dev, priv->rx_cq[i]->vector);
if (err)
break;
}
return err;
}
static int mlx4_en_test_link(struct mlx4_en_priv *priv)
{
if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
return -ENOMEM;
if (priv->port_state.link_state == 1)
return 0;
else
return 1;
}
static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
{
if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
return -ENOMEM;
/* The device supports 100M, 1G, 10G, 20G, 40G and 56G speed */
if (priv->port_state.link_speed != SPEED_100 &&
priv->port_state.link_speed != SPEED_1000 &&
priv->port_state.link_speed != SPEED_10000 &&
priv->port_state.link_speed != SPEED_20000 &&
priv->port_state.link_speed != SPEED_40000 &&
priv->port_state.link_speed != SPEED_56000)
return priv->port_state.link_speed;
return 0;
}
void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
int i, carrier_ok;
memset(buf, 0, sizeof(u64) * MLX4_EN_NUM_SELF_TEST);
if (*flags & ETH_TEST_FL_OFFLINE) {
/* disable the interface */
carrier_ok = netif_carrier_ok(dev);
netif_carrier_off(dev);
/* Wait until all tx queues are empty.
* there should not be any additional incoming traffic
* since we turned the carrier off */
msleep(200);
if (priv->mdev->dev->caps.flags &
MLX4_DEV_CAP_FLAG_UC_LOOPBACK) {
buf[3] = mlx4_en_test_registers(priv);
if (priv->port_up)
buf[4] = mlx4_en_test_loopback(priv);
}
if (carrier_ok)
netif_carrier_on(dev);
}
buf[0] = mlx4_en_test_interrupts(priv);
buf[1] = mlx4_en_test_link(priv);
buf[2] = mlx4_en_test_speed(priv);
for (i = 0; i < MLX4_EN_NUM_SELF_TEST; i++) {
if (buf[i])
*flags |= ETH_TEST_FL_FAILED;
}
}