AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
68e0aa8ec5
linux_dsm_epyc7002/arch/arm/mach-iop13xx/include/mach/iop13xx.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

509 lines
21 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _IOP13XX_HW_H_
#define _IOP13XX_HW_H_
#ifndef __ASSEMBLY__
enum reboot_mode;
/* The ATU offsets can change based on the strapping */
extern u32 iop13xx_atux_pmmr_offset;
extern u32 iop13xx_atue_pmmr_offset;
void iop13xx_init_early(void);
void iop13xx_init_irq(void);
void iop13xx_map_io(void);
void iop13xx_platform_init(void);
void iop13xx_add_tpmi_devices(void);
void iop13xx_init_irq(void);
void iop13xx_restart(enum reboot_mode, const char *);
/* CPUID CP6 R0 Page 0 */
static inline int iop13xx_cpu_id(void)
{
int id;
asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
return id;
}
/* WDTCR CP6 R7 Page 9 */
static inline u32 read_wdtcr(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
return val;
}
static inline void write_wdtcr(u32 val)
{
asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
}
/* WDTSR CP6 R8 Page 9 */
static inline u32 read_wdtsr(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
return val;
}
static inline void write_wdtsr(u32 val)
{
asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
}
/* RCSR - Reset Cause Status Register */
static inline u32 read_rcsr(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val));
return val;
}
extern unsigned long get_iop_tick_rate(void);
#endif
/*
* IOP13XX I/O and Mem space regions for PCI autoconfiguration
*/
#define IOP13XX_MAX_RAM_SIZE 0x80000000UL /* 2GB */
#define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE
/* PCI MAP
* bus range cpu phys cpu virt note
* 0x0000.0000 + 2GB (n/a) (n/a) inbound, 1:1 mapping with Physical RAM
* 0x8000.0000 + 928M 0x1.8000.0000 (ioremap) PCIX outbound memory window
* 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window
*
* IO MAP
* 0x00000 + 64K 0x0.fffb.0000 0xfee0.0000 PCIX outbound i/o window
* 0x10000 + 64K 0x0.fffd.0000 0xfee1.0000 PCIE outbound i/o window
*/
#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL
#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */
#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL
#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL
#define IOP13XX_PCIX_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
#define IOP13XX_PCIX_LOWER_MEM_PA (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
IOP13XX_PCIX_LOWER_MEM_BA)
#define IOP13XX_PCIX_UPPER_MEM_PA (IOP13XX_PCIX_LOWER_MEM_PA +\
IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PCIX_UPPER_MEM_BA (IOP13XX_PCIX_LOWER_MEM_BA +\
IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PCIX_MEM_COOKIE 0x80000000UL
#define IOP13XX_PCIX_LOWER_MEM_RA IOP13XX_PCIX_MEM_COOKIE
#define IOP13XX_PCIX_UPPER_MEM_RA (IOP13XX_PCIX_LOWER_MEM_RA +\
IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PCIX_MEM_OFFSET (IOP13XX_PCIX_MEM_COOKIE -\
IOP13XX_PCIX_LOWER_MEM_BA)
/* PCI-E ranges */
#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL
#define IOP13XX_PCIE_LOWER_IO_BA 0x10000UL /* OIOTVR */
#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL
#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL
#define IOP13XX_PCIE_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
#define IOP13XX_PCIE_LOWER_MEM_PA (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
IOP13XX_PCIE_LOWER_MEM_BA)
#define IOP13XX_PCIE_UPPER_MEM_PA (IOP13XX_PCIE_LOWER_MEM_PA +\
IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PCIE_UPPER_MEM_BA (IOP13XX_PCIE_LOWER_MEM_BA +\
IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
#define IOP13XX_PCIE_MEM_COOKIE 0xc0000000UL
#define IOP13XX_PCIE_LOWER_MEM_RA IOP13XX_PCIE_MEM_COOKIE
#define IOP13XX_PCIE_UPPER_MEM_RA (IOP13XX_PCIE_LOWER_MEM_RA +\
IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PCIE_MEM_OFFSET (IOP13XX_PCIE_MEM_COOKIE -\
IOP13XX_PCIE_LOWER_MEM_BA)
/* PBI Ranges */
#define IOP13XX_PBI_LOWER_MEM_PA 0xf0000000UL
#define IOP13XX_PBI_MEM_WINDOW_SIZE 0x04000000UL
#define IOP13XX_PBI_MEM_COOKIE 0xfa000000UL
#define IOP13XX_PBI_LOWER_MEM_RA IOP13XX_PBI_MEM_COOKIE
#define IOP13XX_PBI_UPPER_MEM_RA (IOP13XX_PBI_LOWER_MEM_RA +\
IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
/*
* IOP13XX chipset registers
*/
#define IOP13XX_PMMR_PHYS_MEM_BASE 0xffd80000UL /* PMMR phys. address */
#define IOP13XX_PMMR_VIRT_MEM_BASE (void __iomem *)(0xfee80000UL) /* PMMR phys. address */
#define IOP13XX_PMMR_MEM_WINDOW_SIZE 0x80000
#define IOP13XX_PMMR_UPPER_MEM_VA (IOP13XX_PMMR_VIRT_MEM_BASE +\
IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PMMR_UPPER_MEM_PA (IOP13XX_PMMR_PHYS_MEM_BASE +\
IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (((addr) - IOP13XX_PMMR_VIRT_MEM_BASE)\
+ IOP13XX_PMMR_PHYS_MEM_BASE)
#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (((addr) - IOP13XX_PMMR_PHYS_MEM_BASE)\
+ IOP13XX_PMMR_VIRT_MEM_BASE)
#define IOP13XX_REG_ADDR32(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
#define IOP13XX_REG_ADDR16(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
#define IOP13XX_REG_ADDR8(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
#define IOP13XX_REG_ADDR32_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
#define IOP13XX_REG_ADDR16_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
#define IOP13XX_REG_ADDR8_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
#define IOP13XX_PMMR_SIZE 0x00080000
/*=================== Defines for Platform Devices =====================*/
#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002300)
#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002340)
#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002300)
#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002340)
#define IOP13XX_I2C0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
#define IOP13XX_I2C1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
#define IOP13XX_I2C2_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
#define IOP13XX_I2C0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
#define IOP13XX_I2C1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
#define IOP13XX_I2C2_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
/* ATU selection flags */
/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
#define IOP13XX_INIT_ATU_DEFAULT (0)
#define IOP13XX_INIT_ATU_ATUX (1 << 0)
#define IOP13XX_INIT_ATU_ATUE (1 << 1)
#define IOP13XX_INIT_ATU_NONE (1 << 2)
/* UART selection flags */
/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
#define IOP13XX_INIT_UART_DEFAULT (0)
#define IOP13XX_INIT_UART_0 (1 << 0)
#define IOP13XX_INIT_UART_1 (1 << 1)
/* I2C selection flags */
/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
#define IOP13XX_INIT_I2C_DEFAULT (0)
#define IOP13XX_INIT_I2C_0 (1 << 0)
#define IOP13XX_INIT_I2C_1 (1 << 1)
#define IOP13XX_INIT_I2C_2 (1 << 2)
/* ADMA selection flags */
/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */
#define IOP13XX_INIT_ADMA_DEFAULT (0)
#define IOP13XX_INIT_ADMA_0 (1 << 0)
#define IOP13XX_INIT_ADMA_1 (1 << 1)
#define IOP13XX_INIT_ADMA_2 (1 << 2)
/* Platform devices */
#define IQ81340_NUM_UART 2
#define IQ81340_NUM_I2C 3
#define IQ81340_NUM_PHYS_MAP_FLASH 1
#define IQ81340_NUM_ADMA 3
#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \
IQ81340_NUM_I2C + \
IQ81340_NUM_PHYS_MAP_FLASH + \
IQ81340_NUM_ADMA)
/*========================== PMMR offsets for key registers ============*/
#define IOP13XX_ATU0_PMMR_OFFSET 0x00048000
#define IOP13XX_ATU1_PMMR_OFFSET 0x0004c000
#define IOP13XX_ATU2_PMMR_OFFSET 0x0004d000
#define IOP13XX_ADMA0_PMMR_OFFSET 0x00000000
#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
#define IOP13XX_MU_PMMR_OFFSET 0x00004000
#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
#define IOP13XX_ESSR0_IFACE_MASK 0x00004000 /* Interface PCI-X / PCI-E */
#define IOP13XX_CONTROLLER_ONLY (1 << 14)
#define IOP13XX_INTERFACE_SEL_PCIX (1 << 15)
#define IOP13XX_PMON_PMMR_OFFSET 0x0001A000
#define IOP13XX_PMON_BASE (IOP13XX_PMMR_VIRT_MEM_BASE +\
IOP13XX_PMON_PMMR_OFFSET)
#define IOP13XX_PMON_PHYSBASE (IOP13XX_PMMR_PHYS_MEM_BASE +\
IOP13XX_PMON_PMMR_OFFSET)
#define IOP13XX_PMON_CMD0 (IOP13XX_PMON_BASE + 0x0)
#define IOP13XX_PMON_EVR0 (IOP13XX_PMON_BASE + 0x4)
#define IOP13XX_PMON_STS0 (IOP13XX_PMON_BASE + 0x8)
#define IOP13XX_PMON_DATA0 (IOP13XX_PMON_BASE + 0xC)
#define IOP13XX_PMON_CMD3 (IOP13XX_PMON_BASE + 0x30)
#define IOP13XX_PMON_EVR3 (IOP13XX_PMON_BASE + 0x34)
#define IOP13XX_PMON_STS3 (IOP13XX_PMON_BASE + 0x38)
#define IOP13XX_PMON_DATA3 (IOP13XX_PMON_BASE + 0x3C)
#define IOP13XX_PMON_CMD7 (IOP13XX_PMON_BASE + 0x70)
#define IOP13XX_PMON_EVR7 (IOP13XX_PMON_BASE + 0x74)
#define IOP13XX_PMON_STS7 (IOP13XX_PMON_BASE + 0x78)
#define IOP13XX_PMON_DATA7 (IOP13XX_PMON_BASE + 0x7C)
#define IOP13XX_PMONEN (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
#define IOP13XX_PMONSTAT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
/*================================ATU===================================*/
#define IOP13XX_ATUX_OFFSET(ofs) IOP13XX_REG_ADDR32(\
iop13xx_atux_pmmr_offset + (ofs))
#define IOP13XX_ATUX_DID IOP13XX_REG_ADDR16(\
iop13xx_atux_pmmr_offset + 0x2)
#define IOP13XX_ATUX_ATUCMD IOP13XX_REG_ADDR16(\
iop13xx_atux_pmmr_offset + 0x4)
#define IOP13XX_ATUX_ATUSR IOP13XX_REG_ADDR16(\
iop13xx_atux_pmmr_offset + 0x6)
#define IOP13XX_ATUX_IABAR0 IOP13XX_ATUX_OFFSET(0x10)
#define IOP13XX_ATUX_IAUBAR0 IOP13XX_ATUX_OFFSET(0x14)
#define IOP13XX_ATUX_IABAR1 IOP13XX_ATUX_OFFSET(0x18)
#define IOP13XX_ATUX_IAUBAR1 IOP13XX_ATUX_OFFSET(0x1c)
#define IOP13XX_ATUX_IABAR2 IOP13XX_ATUX_OFFSET(0x20)
#define IOP13XX_ATUX_IAUBAR2 IOP13XX_ATUX_OFFSET(0x24)
#define IOP13XX_ATUX_IALR0 IOP13XX_ATUX_OFFSET(0x40)
#define IOP13XX_ATUX_IATVR0 IOP13XX_ATUX_OFFSET(0x44)
#define IOP13XX_ATUX_IAUTVR0 IOP13XX_ATUX_OFFSET(0x48)
#define IOP13XX_ATUX_IALR1 IOP13XX_ATUX_OFFSET(0x4c)
#define IOP13XX_ATUX_IATVR1 IOP13XX_ATUX_OFFSET(0x50)
#define IOP13XX_ATUX_IAUTVR1 IOP13XX_ATUX_OFFSET(0x54)
#define IOP13XX_ATUX_IALR2 IOP13XX_ATUX_OFFSET(0x58)
#define IOP13XX_ATUX_IATVR2 IOP13XX_ATUX_OFFSET(0x5c)
#define IOP13XX_ATUX_IAUTVR2 IOP13XX_ATUX_OFFSET(0x60)
#define IOP13XX_ATUX_ATUCR IOP13XX_ATUX_OFFSET(0x70)
#define IOP13XX_ATUX_PCSR IOP13XX_ATUX_OFFSET(0x74)
#define IOP13XX_ATUX_ATUISR IOP13XX_ATUX_OFFSET(0x78)
#define IOP13XX_ATUX_PCIXSR IOP13XX_ATUX_OFFSET(0xD4)
#define IOP13XX_ATUX_IABAR3 IOP13XX_ATUX_OFFSET(0x200)
#define IOP13XX_ATUX_IAUBAR3 IOP13XX_ATUX_OFFSET(0x204)
#define IOP13XX_ATUX_IALR3 IOP13XX_ATUX_OFFSET(0x208)
#define IOP13XX_ATUX_IATVR3 IOP13XX_ATUX_OFFSET(0x20c)
#define IOP13XX_ATUX_IAUTVR3 IOP13XX_ATUX_OFFSET(0x210)
#define IOP13XX_ATUX_OIOBAR IOP13XX_ATUX_OFFSET(0x300)
#define IOP13XX_ATUX_OIOWTVR IOP13XX_ATUX_OFFSET(0x304)
#define IOP13XX_ATUX_OUMBAR0 IOP13XX_ATUX_OFFSET(0x308)
#define IOP13XX_ATUX_OUMWTVR0 IOP13XX_ATUX_OFFSET(0x30c)
#define IOP13XX_ATUX_OUMBAR1 IOP13XX_ATUX_OFFSET(0x310)
#define IOP13XX_ATUX_OUMWTVR1 IOP13XX_ATUX_OFFSET(0x314)
#define IOP13XX_ATUX_OUMBAR2 IOP13XX_ATUX_OFFSET(0x318)
#define IOP13XX_ATUX_OUMWTVR2 IOP13XX_ATUX_OFFSET(0x31c)
#define IOP13XX_ATUX_OUMBAR3 IOP13XX_ATUX_OFFSET(0x320)
#define IOP13XX_ATUX_OUMWTVR3 IOP13XX_ATUX_OFFSET(0x324)
#define IOP13XX_ATUX_OUDMABAR IOP13XX_ATUX_OFFSET(0x328)
#define IOP13XX_ATUX_OUMSIBAR IOP13XX_ATUX_OFFSET(0x32c)
#define IOP13XX_ATUX_OCCAR IOP13XX_ATUX_OFFSET(0x330)
#define IOP13XX_ATUX_OCCDR IOP13XX_ATUX_OFFSET(0x334)
#define IOP13XX_ATUX_ATUCR_OUT_EN (1 << 1)
#define IOP13XX_ATUX_PCSR_CENTRAL_RES (1 << 25)
#define IOP13XX_ATUX_PCSR_P_RSTOUT (1 << 21)
#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY (1 << 15)
#define IOP13XX_ATUX_PCSR_IN_Q_BUSY (1 << 14)
#define IOP13XX_ATUX_PCSR_FREQ_OFFSET (16)
#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR (1 << 18)
#define IOP13XX_ATUX_STAT_VPD_ADDR (1 << 17)
#define IOP13XX_ATUX_STAT_INT_PAR_ERR (1 << 16)
#define IOP13XX_ATUX_STAT_CFG_WRITE (1 << 15)
#define IOP13XX_ATUX_STAT_ERR_COR (1 << 14)
#define IOP13XX_ATUX_STAT_TX_SCEM (1 << 13)
#define IOP13XX_ATUX_STAT_REC_SCEM (1 << 12)
#define IOP13XX_ATUX_STAT_POWER_TRAN (1 << 11)
#define IOP13XX_ATUX_STAT_TX_SERR (1 << 10)
#define IOP13XX_ATUX_STAT_DET_PAR_ERR (1 << 9 )
#define IOP13XX_ATUX_STAT_BIST (1 << 8 )
#define IOP13XX_ATUX_STAT_INT_REC_MABORT (1 << 7 )
#define IOP13XX_ATUX_STAT_REC_SERR (1 << 4 )
#define IOP13XX_ATUX_STAT_EXT_REC_MABORT (1 << 3 )
#define IOP13XX_ATUX_STAT_EXT_REC_TABORT (1 << 2 )
#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT (1 << 1 )
#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR (1 << 0 )
#define IOP13XX_ATUX_PCIXSR_BUS_NUM (8)
#define IOP13XX_ATUX_PCIXSR_DEV_NUM (3)
#define IOP13XX_ATUX_PCIXSR_FUNC_NUM (0)
#define IOP13XX_ATUX_IALR_DISABLE 0x00000001
#define IOP13XX_ATUX_OUMBAR_ENABLE 0x80000000
#define IOP13XX_ATUE_OFFSET(ofs) IOP13XX_REG_ADDR32(\
iop13xx_atue_pmmr_offset + (ofs))
#define IOP13XX_ATUE_DID IOP13XX_REG_ADDR16(\
iop13xx_atue_pmmr_offset + 0x2)
#define IOP13XX_ATUE_ATUCMD IOP13XX_REG_ADDR16(\
iop13xx_atue_pmmr_offset + 0x4)
#define IOP13XX_ATUE_ATUSR IOP13XX_REG_ADDR16(\
iop13xx_atue_pmmr_offset + 0x6)
#define IOP13XX_ATUE_IABAR0 IOP13XX_ATUE_OFFSET(0x10)
#define IOP13XX_ATUE_IAUBAR0 IOP13XX_ATUE_OFFSET(0x14)
#define IOP13XX_ATUE_IABAR1 IOP13XX_ATUE_OFFSET(0x18)
#define IOP13XX_ATUE_IAUBAR1 IOP13XX_ATUE_OFFSET(0x1c)
#define IOP13XX_ATUE_IABAR2 IOP13XX_ATUE_OFFSET(0x20)
#define IOP13XX_ATUE_IAUBAR2 IOP13XX_ATUE_OFFSET(0x24)
#define IOP13XX_ATUE_IALR0 IOP13XX_ATUE_OFFSET(0x40)
#define IOP13XX_ATUE_IATVR0 IOP13XX_ATUE_OFFSET(0x44)
#define IOP13XX_ATUE_IAUTVR0 IOP13XX_ATUE_OFFSET(0x48)
#define IOP13XX_ATUE_IALR1 IOP13XX_ATUE_OFFSET(0x4c)
#define IOP13XX_ATUE_IATVR1 IOP13XX_ATUE_OFFSET(0x50)
#define IOP13XX_ATUE_IAUTVR1 IOP13XX_ATUE_OFFSET(0x54)
#define IOP13XX_ATUE_IALR2 IOP13XX_ATUE_OFFSET(0x58)
#define IOP13XX_ATUE_IATVR2 IOP13XX_ATUE_OFFSET(0x5c)
#define IOP13XX_ATUE_IAUTVR2 IOP13XX_ATUE_OFFSET(0x60)
#define IOP13XX_ATUE_PE_LSTS IOP13XX_REG_ADDR16(\
iop13xx_atue_pmmr_offset + 0xe2)
#define IOP13XX_ATUE_OIOWTVR IOP13XX_ATUE_OFFSET(0x304)
#define IOP13XX_ATUE_OUMBAR0 IOP13XX_ATUE_OFFSET(0x308)
#define IOP13XX_ATUE_OUMWTVR0 IOP13XX_ATUE_OFFSET(0x30c)
#define IOP13XX_ATUE_OUMBAR1 IOP13XX_ATUE_OFFSET(0x310)
#define IOP13XX_ATUE_OUMWTVR1 IOP13XX_ATUE_OFFSET(0x314)
#define IOP13XX_ATUE_OUMBAR2 IOP13XX_ATUE_OFFSET(0x318)
#define IOP13XX_ATUE_OUMWTVR2 IOP13XX_ATUE_OFFSET(0x31c)
#define IOP13XX_ATUE_OUMBAR3 IOP13XX_ATUE_OFFSET(0x320)
#define IOP13XX_ATUE_OUMWTVR3 IOP13XX_ATUE_OFFSET(0x324)
#define IOP13XX_ATUE_ATUCR IOP13XX_ATUE_OFFSET(0x70)
#define IOP13XX_ATUE_PCSR IOP13XX_ATUE_OFFSET(0x74)
#define IOP13XX_ATUE_ATUISR IOP13XX_ATUE_OFFSET(0x78)
#define IOP13XX_ATUE_OIOBAR IOP13XX_ATUE_OFFSET(0x300)
#define IOP13XX_ATUE_OCCAR IOP13XX_ATUE_OFFSET(0x32c)
#define IOP13XX_ATUE_OCCDR IOP13XX_ATUE_OFFSET(0x330)
#define IOP13XX_ATUE_PIE_STS IOP13XX_ATUE_OFFSET(0x384)
#define IOP13XX_ATUE_PIE_MSK IOP13XX_ATUE_OFFSET(0x388)
#define IOP13XX_ATUE_ATUCR_IVM (1 << 6)
#define IOP13XX_ATUE_ATUCR_OUT_EN (1 << 1)
#define IOP13XX_ATUE_OCCAR_BUS_NUM (24)
#define IOP13XX_ATUE_OCCAR_DEV_NUM (19)
#define IOP13XX_ATUE_OCCAR_FUNC_NUM (16)
#define IOP13XX_ATUE_OCCAR_EXT_REG (8)
#define IOP13XX_ATUE_OCCAR_REG (2)
#define IOP13XX_ATUE_PCSR_BUS_NUM (24)
#define IOP13XX_ATUE_PCSR_DEV_NUM (19)
#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY (1 << 15)
#define IOP13XX_ATUE_PCSR_IN_Q_BUSY (1 << 14)
#define IOP13XX_ATUE_PCSR_END_POINT (1 << 13)
#define IOP13XX_ATUE_PCSR_LLRB_BUSY (1 << 12)
#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK (0xff)
#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK (0x1f)
#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK (0x7)
#define IOP13XX_ATUE_PCSR_CORE_RESET (8)
#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
#define IOP13XX_ATUE_LSTS_TRAINING (1 << 11)
#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG (1 << 28)
#define IOP13XX_ATUE_STAT_PME (1 << 27)
#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG (1 << 26)
#define IOP13XX_ATUE_STAT_IVM (1 << 25)
#define IOP13XX_ATUE_STAT_BIST (1 << 24)
#define IOP13XX_ATUE_STAT_CFG_WRITE (1 << 18)
#define IOP13XX_ATUE_STAT_VPD_ADDR (1 << 17)
#define IOP13XX_ATUE_STAT_POWER_TRAN (1 << 16)
#define IOP13XX_ATUE_STAT_HALT_ON_ERROR (1 << 13)
#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR (1 << 12)
#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG (1 << 11)
#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR (1 << 10)
#define IOP13XX_ATUE_STAT_ERR_COR (1 << 9 )
#define IOP13XX_ATUE_STAT_ERR_UNCOR (1 << 8 )
#define IOP13XX_ATUE_STAT_CRS (1 << 7 )
#define IOP13XX_ATUE_STAT_LNK_DWN (1 << 6 )
#define IOP13XX_ATUE_STAT_INT_REC_MABORT (1 << 5 )
#define IOP13XX_ATUE_STAT_DET_PAR_ERR (1 << 4 )
#define IOP13XX_ATUE_STAT_EXT_REC_MABORT (1 << 3 )
#define IOP13XX_ATUE_STAT_SIG_TABORT (1 << 2 )
#define IOP13XX_ATUE_STAT_EXT_REC_TABORT (1 << 1 )
#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR (1 << 0 )
#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ (1 << 31)
#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT (1 << 30)
#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP (1 << 29)
#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR (1 << 28)
#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ (1 << 20)
#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR (1 << 19)
#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP (1 << 18)
#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW (1 << 17)
#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP (1 << 16)
#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT (1 << 15)
#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT (1 << 14)
#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR (1 << 13)
#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP (1 << 12)
#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR (1 << 4 )
#define IOP13XX_ATUE_ESTAT_TRAINING_ERR (1 << 0 )
#define IOP13XX_ATUE_IALR_DISABLE (0x00000001)
#define IOP13XX_ATUE_OUMBAR_ENABLE (0x80000000)
#define IOP13XX_ATU_OUMBAR_FUNC_NUM (28)
#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
/*=======================================================================*/
/*============================MESSAGING UNIT=============================*/
#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
(ofs))
#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10)
#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14)
#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18)
#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C)
#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20)
#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24)
#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28)
#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C)
#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30)
#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34)
#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38)
#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C)
#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48)
#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50)
#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54)
#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84)
#define IOP13XX_MU_WINDOW_SIZE (8 * 1024)
#define IOP13XX_MU_BASE_PHYS (0xff000000)
#define IOP13XX_MU_BASE_PCI (0xff000000)
#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48)
#define IOP13XX_MU_MIMR_CORE_SELECT (15)
/*=======================================================================*/
/*==============================ADMA UNITS===============================*/
#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
/*==============================XSI BRIDGE===============================*/
#define IOP13XX_XBG_BECSR IOP13XX_REG_ADDR32(0x178c)
#define IOP13XX_XBG_BERAR IOP13XX_REG_ADDR32(0x1790)
#define IOP13XX_XBG_BERUAR IOP13XX_REG_ADDR32(0x1794)
#define is_atue_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
IOP13XX_PMMR_VIRT_TO_PHYS(\
IOP13XX_ATUE_OCCDR))\
&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
#define is_atux_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
IOP13XX_PMMR_VIRT_TO_PHYS(\
IOP13XX_ATUX_OCCDR))\
&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
/*=======================================================================*/
#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
(ofs))
#define IOP13XX_PBI_CR IOP13XX_PBI_OFFSET(0x0)
#define IOP13XX_PBI_SR IOP13XX_PBI_OFFSET(0x4)
#define IOP13XX_PBI_BAR0 IOP13XX_PBI_OFFSET(0x8)
#define IOP13XX_PBI_LR0 IOP13XX_PBI_OFFSET(0xc)
#define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10)
#define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14)
#define IOP13XX_PROCESSOR_FREQ IOP13XX_REG_ADDR32(0x2180)
/* Watchdog timer definitions */
#define IOP_WDTCR_EN_ARM 0x1e1e1e1e
#define IOP_WDTCR_EN 0xe1e1e1e1
#define IOP_WDTCR_DIS_ARM 0x1f1f1f1f
#define IOP_WDTCR_DIS 0xf1f1f1f1
#define IOP_RCSR_WDT (1 << 5) /* reset caused by watchdog timer */
#define IOP13XX_WDTSR_WRITE_EN (1 << 31) /* used to speed up reset requests */
#define IOP13XX_WDTCR_IB_RESET (1 << 0)
#endif /* _IOP13XX_HW_H_ */
Reference in New Issue View Git Blame Copy Permalink