mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-02-15 09:26:23 +07:00
68b65f7305
Add DMA engine support for transmit to the PL011 driver. Based on a
patch from Linus Walliej, with the following changes:
- remove RX DMA support. As PL011 doesn't give us receive timeout
interrupts, we only get notified of received data when the RX DMA
has completed. This rather sucks for interactive use of the TTY.
- remove abuse of completions. Completions are supposed to be for
events, not to tell what condition buffers are in. Replace it with
a simple 'queued' bool.
- fix locking - it is only safe to access the circular buffer with the
port lock held.
- only map the DMA buffer when required - if we're ever behind an IOMMU
this helps keep IOMMU usage down, and also ensures that we're legal
when we change the scatterlist entry length.
- fix XON/XOFF sending - we must send XON/XOFF characters out as soon
as possible - waiting for up to 4095 characters in the DMA buffer
to be sent first is not acceptable.
- fix XON/XOFF receive handling - we need to stop DMA when instructed
to by the TTY layer, and restart it again when instructed to. There
is a subtle problem here: we must not completely empty the circular
buffer with DMA, otherwise we will not be notified of XON.
- change the 'enable_dma' flag into a 'using DMA' flag, and track
whether we can use TX DMA by whether the channel pointer is non-NULL.
This gives us more control over whether we use DMA in the driver.
- we don't need to have the TX DMA buffer continually allocated for
each port - instead, allocate it when the port starts up, and free
it when it's shut down. Update the 'using DMA' flag if we get
the buffer, and adjust the TTY FIFO size appropriately.
- if we're going to use PIO to send characters, use the existing IRQ
based functionality rather than reimplementing it. This also ensures
we call uart_write_wakeup() at the appropriate time, otherwise we'll
stall.
- use DMA engine helper functions for type safety.
- fix init when built as a module - we can't have to initcall functions,
so we must settle on one. This means we can eliminate the deferred
DMA initialization.
- there is no need to terminate transfers on a failed prep_slave_sg()
call - nothing has been setup, so nothing needs to be terminated.
This avoids a potential deadlock in the DMA engine code
(tasklet->callback->failed prepare->terminate->tasklet_disable
which then ends up waiting for the tasklet to finish running.)
- Dan says that the submission callback should not return an error:
| dma_submit_error() is something I should have removed after commit
|
|
||
|---|---|---|
| .. | ||
| cpm_uart | ||
| jsm | ||
| 8250_accent.c | ||
| 8250_acorn.c | ||
| 8250_boca.c | ||
| 8250_early.c | ||
| 8250_exar_st16c554.c | ||
| 8250_fourport.c | ||
| 8250_gsc.c | ||
| 8250_hp300.c | ||
| 8250_hub6.c | ||
| 8250_mca.c | ||
| 8250_pci.c | ||
| 8250_pnp.c | ||
| 8250.c | ||
| 8250.h | ||
| 21285.c | ||
| 68328serial.c | ||
| 68328serial.h | ||
| 68360serial.c | ||
| altera_jtaguart.c | ||
| altera_uart.c | ||
| amba-pl010.c | ||
| amba-pl011.c | ||
| apbuart.c | ||
| apbuart.h | ||
| atmel_serial.c | ||
| bcm63xx_uart.c | ||
| bfin_5xx.c | ||
| bfin_sport_uart.c | ||
| bfin_sport_uart.h | ||
| clps711x.c | ||
| crisv10.c | ||
| crisv10.h | ||
| dz.c | ||
| dz.h | ||
| icom.c | ||
| icom.h | ||
| imx.c | ||
| ioc3_serial.c | ||
| ioc4_serial.c | ||
| ip22zilog.c | ||
| ip22zilog.h | ||
| Kconfig | ||
| kgdboc.c | ||
| m32r_sio_reg.h | ||
| m32r_sio.c | ||
| m32r_sio.h | ||
| Makefile | ||
| max3100.c | ||
| max3107-aava.c | ||
| max3107.c | ||
| max3107.h | ||
| mcf.c | ||
| mfd.c | ||
| mpc52xx_uart.c | ||
| mpsc.c | ||
| mrst_max3110.c | ||
| mrst_max3110.h | ||
| msm_serial.c | ||
| msm_serial.h | ||
| mux.c | ||
| netx-serial.c | ||
| nwpserial.c | ||
| of_serial.c | ||
| omap-serial.c | ||
| pmac_zilog.c | ||
| pmac_zilog.h | ||
| pnx8xxx_uart.c | ||
| pxa.c | ||
| s3c24a0.c | ||
| s3c2400.c | ||
| s3c2410.c | ||
| s3c2412.c | ||
| s3c2440.c | ||
| s3c6400.c | ||
| s5pv210.c | ||
| sa1100.c | ||
| samsung.c | ||
| samsung.h | ||
| sb1250-duart.c | ||
| sc26xx.c | ||
| serial_core.c | ||
| serial_cs.c | ||
| serial_ks8695.c | ||
| serial_lh7a40x.c | ||
| serial_txx9.c | ||
| sh-sci.c | ||
| sh-sci.h | ||
| sn_console.c | ||
| suncore.c | ||
| suncore.h | ||
| sunhv.c | ||
| sunsab.c | ||
| sunsab.h | ||
| sunsu.c | ||
| sunzilog.c | ||
| sunzilog.h | ||
| timbuart.c | ||
| timbuart.h | ||
| uartlite.c | ||
| ucc_uart.c | ||
| vr41xx_siu.c | ||
| zs.c | ||
| zs.h | ||