Allen Yan 68a0db1d7d serial: mvebu-uart: add function to change baudrate ... Until now, the first UART port baudrate was set by the bootloader. Add a function allowing to change the baudrate. Changes may be done from userspace but also at probe time by the kernel. Use the simplest method: baudrate divisor. Works for all UART ports until 230400 baud. To achieve higher baudrates, software should implement the fractional divisor feature that allows more accuracy for higher rates. Signed-off-by: Allen Yan <yanwei@marvell.com> [<miquel.raynal@free-electrons.com>: changed termios handling] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2017-10-20 14:20:06 +02:00
..
8250	serial: 8250_fintek: Fix finding base_port with activated SuperIO	2017-10-20 14:06:46 +02:00
cpm_uart	serial: cpm_uart: constify uart_ops structures	2017-08-28 20:51:21 +02:00
jsm	tty: serial: jsm: Add space before the open brace	2017-10-03 20:31:39 +02:00
21285.c	serial: 21285: constify uart_ops structures	2017-08-28 20:51:21 +02:00
altera_jtaguart.c	serial: altera_jtaguart: adding iounmap()	2017-05-18 16:43:55 +02:00
altera_uart.c	serial: altera_uart: call iounmap() at driver remove	2017-05-25 14:36:37 +02:00
amba-pl010.c	serial: pl010: constify amba_id	2017-08-28 20:51:19 +02:00
amba-pl011.c	tty: amba-pl011: Convert timers to use timer_setup()	2017-10-20 14:06:46 +02:00
amba-pl011.h
apbuart.c	serial: apbuart: constify uart_ops structures	2017-08-28 20:51:21 +02:00
apbuart.h
ar933x_uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
arc_uart.c	serial: arc: Remove __init marking from early write	2017-07-30 07:38:50 -07:00
atmel_serial.c	tty/serial: atmel: Prevent a warning on suspend	2017-10-04 10:14:16 +02:00
atmel_serial.h	tty/serial: atmel: move atmel_serial header into driver directory	2017-03-14 10:59:04 +08:00
bcm63xx_uart.c	serial: bcm63xx: fix timing issue.	2017-09-18 18:19:20 +02:00
bfin_sport_uart.c	tty: serial: make sport_uart_ops static and const	2017-09-18 18:31:48 +02:00
bfin_sport_uart.h
bfin_uart.c
clps711x.c	serial: clps711x: Changing the compatibility string to match with the smallest supported chip	2016-07-06 17:38:16 +02:00
crisv10.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c	tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE	2016-02-14 17:39:36 -08:00
dz.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c	tty/serial: mark __init early_smh_setup() static	2016-09-02 15:03:35 +02:00
earlycon.c	earlycon: initialise baud field of earlycon device structure	2017-08-31 18:47:31 +02:00
efm32-uart.c	serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'	2017-05-18 16:43:55 +02:00
etraxfs-uart.c
fsl_lpuart.c	Merge 4.14-rc4 into tty-next	2017-10-09 09:05:05 +02:00
icom.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c	drivers: tty: ifx6x60: use setup_timer() helper.	2017-10-03 20:28:36 +02:00
ifx6x60.h
imx.c	serial: imx: Correct comment imx_flush_buffer()	2017-10-20 13:57:37 +02:00
ioc3_serial.c	drivers: tty: serial: move inline before return type	2017-07-12 16:26:04 -07:00
ioc4_serial.c	drivers: tty: serial: move inline before return type	2017-07-12 16:26:04 -07:00
ip22zilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig	tty: serial: owl: Implement console driver	2017-07-18 09:28:29 +02:00
kgdb_nmi.c
kgdboc.c
lantiq.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
lpc32xx_hs.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c	serial: m32r_sio: Convert timers to use timer_setup()	2017-10-20 14:06:46 +02:00
Makefile	tty: serial: Add Actions Semi Owl UART earlycon	2017-06-20 10:24:15 +08:00
max310x.c	serial: max310x: Add support for newer silicon revisions	2017-01-12 11:51:24 +01:00
max3100.c	drivers: tty: max3100: use setup_timer() helper.	2017-10-03 20:28:36 +02:00
mcf.c
men_z135_uart.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
meson_uart.c	serial: meson: add Magic SysRq support	2017-09-18 18:31:48 +02:00
mpc52xx_uart.c	serial: mpc52xx: constify uart_ops structures	2017-08-28 20:51:21 +02:00
mps2-uart.c	serial: mps2-uart: make driver explicitly non-modular	2016-06-25 14:01:57 -07:00
mpsc.c	serial/mpsc: switch to dma_alloc_attrs	2017-06-20 10:24:15 +08:00
msm_serial.c	tty: serial: msm: Move request_irq to the end of startup	2017-08-28 20:51:19 +02:00
mux.c	drivers: tty: mux: use setup_timer() helper.	2017-10-03 20:28:35 +02:00
mvebu-uart.c	serial: mvebu-uart: add function to change baudrate	2017-10-20 14:20:06 +02:00
mxs-auart.c	serial: mxs-auart: Fix baudrate calculation	2017-03-31 17:26:19 +02:00
netx-serial.c
omap-serial.c	serial: omap-serial: Use common rs485 device tree parsing function	2017-09-18 18:36:25 +02:00
owl-uart.c	serial: owl: constify uart_ops structures	2017-08-28 20:51:19 +02:00
pch_uart.c	dmi: Mark all struct dmi_system_id instances const	2017-09-14 11:59:30 +02:00
pic32_uart.c	serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy	2017-01-12 11:51:24 +01:00
pic32_uart.h	serial: pic32_uart: Add PIC32 UART driver	2016-05-13 14:01:56 +02:00
pmac_zilog.c	tty: Convert to using %pOF instead of full_name	2017-07-30 07:35:28 -07:00
pmac_zilog.h
pnx8xxx_uart.c	drivers: tty: pnx8xxx: use setup_timer() helper.	2017-10-03 20:28:36 +02:00
pxa.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c	drivers: tty: sa1100: use setup_timer() helper.	2017-10-03 20:28:36 +02:00
samsung.c	serial: samsung: Remove useless spinlock	2017-04-08 18:58:52 +02:00
samsung.h	serial: samsung: Simplify DMA engine initialization code	2017-01-12 11:51:24 +01:00
sb1250-duart.c	drivers: convert sbd_duart.map_guard from atomic_t to refcount_t	2017-03-14 11:01:40 +08:00
sc16is7xx.c	sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h>	2017-03-02 08:42:27 +01:00
sccnxp.c	serial: sccnxp: Fix error handling in sccnxp_probe()	2017-09-18 18:19:21 +02:00
serial_core.c	serial: Add common rs485 device tree parsing function	2017-09-18 18:36:25 +02:00
serial_ks8695.c	serial: Fix ASYNC_* => UPF_* flags misuse	2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c	serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct	2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h	serial: mctrl_gpio: add modem control read routine	2016-06-25 14:30:42 -07:00
serial_txx9.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
serial-tegra.c	serial: tegra: explicitly request exclusive reset control	2017-07-30 07:35:28 -07:00
sh-sci.c	serial: sh-sci: Fix init data attribute for struct 'port_cfg'	2017-10-20 13:57:37 +02:00
sh-sci.h	serial: sh-sci: Support for variable HSCIF hardware RX timeout	2017-10-03 20:34:21 +02:00
sirfsoc_uart.c	serial: sirf: make of_device_ids const	2017-06-20 10:24:15 +08:00
sirfsoc_uart.h	serial: sirf: make fifo functions static	2016-06-25 14:01:57 -07:00
sn_console.c	drivers: tty: sn_console: use setup_timer() helper.	2017-10-03 20:28:36 +02:00
sprd_serial.c	tty: serial: sprd: fix error return code in sprd_probe()	2017-08-28 20:51:19 +02:00
st-asc.c	serial: st-asc: Avoid using irq_wake flag	2017-08-28 20:51:19 +02:00
stm32-usart.c	Arm: dts: stm32: remove extra compatible string from DT & driver	2017-10-04 10:15:47 +02:00
stm32-usart.h	serial: stm32: add fifo support	2017-07-30 07:32:32 -07:00
suncore.c
sunhv.c	sparc64: Send break twice from console to return to boot prom	2017-02-23 08:27:24 -08:00
sunsab.c	serial: sunsab: constify uart_ops structures	2017-08-28 20:51:21 +02:00
sunsab.h
sunsu.c	serial: sunsu: constify uart_ops structures	2017-08-28 20:51:21 +02:00
sunzilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c	serial-uartlite: pr_err() strings should end with newlines	2017-10-20 14:20:06 +02:00
ucc_uart.c	serial: uuc_uart: constify uart_ops structures	2017-08-28 20:51:21 +02:00
vr41xx_siu.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
vt8500_serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
xilinx_uartps.c	tty: xilinx_uartps: move to arch_initcall for earlier console	2017-10-04 10:15:47 +02:00
zs.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
zs.h