mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 12:37:59 +07:00
4a9e5ca1a5
The phy_ops variables are never modified after initialized in these drivers, so make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
295 lines
8.1 KiB
C
295 lines
8.1 KiB
C
/*
|
|
* ST spear1340-miphy driver
|
|
*
|
|
* Copyright (C) 2014 ST Microelectronics
|
|
* Pratyush Anand <pratyush.anand@gmail.com>
|
|
* Mohit Kumar <mohit.kumar.dhaka@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* SPEAr1340 Registers */
|
|
/* Power Management Registers */
|
|
#define SPEAR1340_PCM_CFG 0x100
|
|
#define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11)
|
|
#define SPEAR1340_PCM_WKUP_CFG 0x104
|
|
#define SPEAR1340_SWITCH_CTR 0x108
|
|
|
|
#define SPEAR1340_PERIP1_SW_RST 0x318
|
|
#define SPEAR1340_PERIP1_SW_RSATA BIT(12)
|
|
#define SPEAR1340_PERIP2_SW_RST 0x31C
|
|
#define SPEAR1340_PERIP3_SW_RST 0x320
|
|
|
|
/* PCIE - SATA configuration registers */
|
|
#define SPEAR1340_PCIE_SATA_CFG 0x424
|
|
/* PCIE CFG MASks */
|
|
#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11)
|
|
#define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10)
|
|
#define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9)
|
|
#define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8)
|
|
#define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4)
|
|
#define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3)
|
|
#define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2)
|
|
#define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1)
|
|
#define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
|
|
#define SPEAR1340_PCIE_SATA_SEL_SATA (1)
|
|
#define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F
|
|
#define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
|
|
SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
|
|
SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
|
|
SPEAR1340_PCIE_CFG_POWERUP_RESET | \
|
|
SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
|
|
#define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
|
|
SPEAR1340_SATA_CFG_PM_CLK_EN | \
|
|
SPEAR1340_SATA_CFG_POWERUP_RESET | \
|
|
SPEAR1340_SATA_CFG_RX_CLK_EN | \
|
|
SPEAR1340_SATA_CFG_TX_CLK_EN)
|
|
|
|
#define SPEAR1340_PCIE_MIPHY_CFG 0x428
|
|
#define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31)
|
|
#define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27)
|
|
#define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
|
|
#define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
|
|
#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
|
|
#define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF
|
|
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
|
|
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
|
|
SPEAR1340_MIPHY_CLK_REF_DIV2 | \
|
|
SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
|
|
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
|
|
(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
|
|
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
|
|
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
|
|
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
|
|
|
|
enum spear1340_miphy_mode {
|
|
SATA,
|
|
PCIE,
|
|
};
|
|
|
|
struct spear1340_miphy_priv {
|
|
/* phy mode: 0 for SATA 1 for PCIe */
|
|
enum spear1340_miphy_mode mode;
|
|
/* regmap for any soc specific misc registers */
|
|
struct regmap *misc;
|
|
/* phy struct pointer */
|
|
struct phy *phy;
|
|
};
|
|
|
|
static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv)
|
|
{
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
|
|
SPEAR1340_PCIE_SATA_CFG_MASK,
|
|
SPEAR1340_SATA_CFG_VAL);
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
|
|
SPEAR1340_PCIE_MIPHY_CFG_MASK,
|
|
SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK);
|
|
/* Switch on sata power domain */
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
|
|
SPEAR1340_PCM_CFG_SATA_POWER_EN,
|
|
SPEAR1340_PCM_CFG_SATA_POWER_EN);
|
|
/* Wait for SATA power domain on */
|
|
msleep(20);
|
|
|
|
/* Disable PCIE SATA Controller reset */
|
|
regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
|
|
SPEAR1340_PERIP1_SW_RSATA, 0);
|
|
/* Wait for SATA reset de-assert completion */
|
|
msleep(20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv)
|
|
{
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
|
|
SPEAR1340_PCIE_SATA_CFG_MASK, 0);
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
|
|
SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
|
|
|
|
/* Enable PCIE SATA Controller reset */
|
|
regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
|
|
SPEAR1340_PERIP1_SW_RSATA,
|
|
SPEAR1340_PERIP1_SW_RSATA);
|
|
/* Wait for SATA power domain off */
|
|
msleep(20);
|
|
/* Switch off sata power domain */
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
|
|
SPEAR1340_PCM_CFG_SATA_POWER_EN, 0);
|
|
/* Wait for SATA reset assert completion */
|
|
msleep(20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv)
|
|
{
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
|
|
SPEAR1340_PCIE_MIPHY_CFG_MASK,
|
|
SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE);
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
|
|
SPEAR1340_PCIE_SATA_CFG_MASK,
|
|
SPEAR1340_PCIE_CFG_VAL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv)
|
|
{
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
|
|
SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
|
|
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
|
|
SPEAR1340_PCIE_SATA_CFG_MASK, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spear1340_miphy_init(struct phy *phy)
|
|
{
|
|
struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
|
|
int ret = 0;
|
|
|
|
if (priv->mode == SATA)
|
|
ret = spear1340_miphy_sata_init(priv);
|
|
else if (priv->mode == PCIE)
|
|
ret = spear1340_miphy_pcie_init(priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int spear1340_miphy_exit(struct phy *phy)
|
|
{
|
|
struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
|
|
int ret = 0;
|
|
|
|
if (priv->mode == SATA)
|
|
ret = spear1340_miphy_sata_exit(priv);
|
|
else if (priv->mode == PCIE)
|
|
ret = spear1340_miphy_pcie_exit(priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id spear1340_miphy_of_match[] = {
|
|
{ .compatible = "st,spear1340-miphy" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match);
|
|
|
|
static const struct phy_ops spear1340_miphy_ops = {
|
|
.init = spear1340_miphy_init,
|
|
.exit = spear1340_miphy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int spear1340_miphy_suspend(struct device *dev)
|
|
{
|
|
struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
if (priv->mode == SATA)
|
|
ret = spear1340_miphy_sata_exit(priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int spear1340_miphy_resume(struct device *dev)
|
|
{
|
|
struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
if (priv->mode == SATA)
|
|
ret = spear1340_miphy_sata_init(priv);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend,
|
|
spear1340_miphy_resume);
|
|
|
|
static struct phy *spear1340_miphy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
|
|
|
|
if (args->args_count < 1) {
|
|
dev_err(dev, "DT did not pass correct no of args\n");
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
priv->mode = args->args[0];
|
|
|
|
if (priv->mode != SATA && priv->mode != PCIE) {
|
|
dev_err(dev, "DT did not pass correct phy mode\n");
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
return priv->phy;
|
|
}
|
|
|
|
static int spear1340_miphy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct spear1340_miphy_priv *priv;
|
|
struct phy_provider *phy_provider;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->misc =
|
|
syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
|
|
if (IS_ERR(priv->misc)) {
|
|
dev_err(dev, "failed to find misc regmap\n");
|
|
return PTR_ERR(priv->misc);
|
|
}
|
|
|
|
priv->phy = devm_phy_create(dev, NULL, &spear1340_miphy_ops);
|
|
if (IS_ERR(priv->phy)) {
|
|
dev_err(dev, "failed to create SATA PCIe PHY\n");
|
|
return PTR_ERR(priv->phy);
|
|
}
|
|
|
|
dev_set_drvdata(dev, priv);
|
|
phy_set_drvdata(priv->phy, priv);
|
|
|
|
phy_provider =
|
|
devm_of_phy_provider_register(dev, spear1340_miphy_xlate);
|
|
if (IS_ERR(phy_provider)) {
|
|
dev_err(dev, "failed to register phy provider\n");
|
|
return PTR_ERR(phy_provider);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver spear1340_miphy_driver = {
|
|
.probe = spear1340_miphy_probe,
|
|
.driver = {
|
|
.name = "spear1340-miphy",
|
|
.pm = &spear1340_miphy_pm_ops,
|
|
.of_match_table = of_match_ptr(spear1340_miphy_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(spear1340_miphy_driver);
|
|
|
|
MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
|
|
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|