mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-19 23:57:47 +07:00
797c0113c9
Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
182 lines
6.4 KiB
Plaintext
182 lines
6.4 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# TPM device configuration
|
|
#
|
|
|
|
menuconfig TCG_TPM
|
|
tristate "TPM Hardware Support"
|
|
depends on HAS_IOMEM
|
|
imply SECURITYFS
|
|
select CRYPTO
|
|
select CRYPTO_HASH_INFO
|
|
---help---
|
|
If you have a TPM security chip in your system, which
|
|
implements the Trusted Computing Group's specification,
|
|
say Yes and it will be accessible from within Linux. For
|
|
more information see <http://www.trustedcomputinggroup.org>.
|
|
An implementation of the Trusted Software Stack (TSS), the
|
|
userspace enablement piece of the specification, can be
|
|
obtained at: <http://sourceforge.net/projects/trousers>. To
|
|
compile this driver as a module, choose M here; the module
|
|
will be called tpm. If unsure, say N.
|
|
Notes:
|
|
1) For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
|
|
and CONFIG_PNPACPI.
|
|
2) Without ACPI enabled, the BIOS event log won't be accessible,
|
|
which is required to validate the PCR 0-7 values.
|
|
|
|
if TCG_TPM
|
|
|
|
config HW_RANDOM_TPM
|
|
bool "TPM HW Random Number Generator support"
|
|
depends on TCG_TPM && HW_RANDOM && !(TCG_TPM=y && HW_RANDOM=m)
|
|
default y
|
|
---help---
|
|
This setting exposes the TPM's Random Number Generator as a hwrng
|
|
device. This allows the kernel to collect randomness from the TPM at
|
|
boot, and provides the TPM randomines in /dev/hwrng.
|
|
|
|
If unsure, say Y.
|
|
|
|
config TCG_TIS_CORE
|
|
tristate
|
|
---help---
|
|
TCG TIS TPM core driver. It implements the TPM TCG TIS logic and hooks
|
|
into the TPM kernel APIs. Physical layers will register against it.
|
|
|
|
config TCG_TIS
|
|
tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface"
|
|
depends on X86 || OF
|
|
select TCG_TIS_CORE
|
|
---help---
|
|
If you have a TPM security chip that is compliant with the
|
|
TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
|
|
specification (TPM2.0) say Yes and it will be accessible from
|
|
within Linux. To compile this driver as a module, choose M here;
|
|
the module will be called tpm_tis.
|
|
|
|
config TCG_TIS_SPI
|
|
tristate "TPM Interface Specification 1.3 Interface / TPM 2.0 FIFO Interface - (SPI)"
|
|
depends on SPI
|
|
select TCG_TIS_CORE
|
|
---help---
|
|
If you have a TPM security chip which is connected to a regular,
|
|
non-tcg SPI master (i.e. most embedded platforms) that is compliant with the
|
|
TCG TIS 1.3 TPM specification (TPM1.2) or the TCG PTP FIFO
|
|
specification (TPM2.0) say Yes and it will be accessible from
|
|
within Linux. To compile this driver as a module, choose M here;
|
|
the module will be called tpm_tis_spi.
|
|
|
|
config TCG_TIS_SPI_CR50
|
|
bool "Cr50 SPI Interface"
|
|
depends on TCG_TIS_SPI
|
|
help
|
|
If you have a H1 secure module running Cr50 firmware on SPI bus,
|
|
say Yes and it will be accessible from within Linux.
|
|
|
|
config TCG_TIS_I2C_ATMEL
|
|
tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"
|
|
depends on I2C
|
|
---help---
|
|
If you have an Atmel I2C TPM security chip say Yes and it will be
|
|
accessible from within Linux.
|
|
To compile this driver as a module, choose M here; the module will
|
|
be called tpm_tis_i2c_atmel.
|
|
|
|
config TCG_TIS_I2C_INFINEON
|
|
tristate "TPM Interface Specification 1.2 Interface (I2C - Infineon)"
|
|
depends on I2C
|
|
---help---
|
|
If you have a TPM security chip that is compliant with the
|
|
TCG TIS 1.2 TPM specification and Infineon's I2C Protocol Stack
|
|
Specification 0.20 say Yes and it will be accessible from within
|
|
Linux.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called tpm_i2c_infineon.
|
|
|
|
config TCG_TIS_I2C_NUVOTON
|
|
tristate "TPM Interface Specification 1.2 Interface (I2C - Nuvoton)"
|
|
depends on I2C
|
|
---help---
|
|
If you have a TPM security chip with an I2C interface from
|
|
Nuvoton Technology Corp. say Yes and it will be accessible
|
|
from within Linux.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called tpm_i2c_nuvoton.
|
|
|
|
config TCG_NSC
|
|
tristate "National Semiconductor TPM Interface"
|
|
depends on X86
|
|
---help---
|
|
If you have a TPM security chip from National Semiconductor
|
|
say Yes and it will be accessible from within Linux. To
|
|
compile this driver as a module, choose M here; the module
|
|
will be called tpm_nsc.
|
|
|
|
config TCG_ATMEL
|
|
tristate "Atmel TPM Interface"
|
|
depends on PPC64 || HAS_IOPORT_MAP
|
|
---help---
|
|
If you have a TPM security chip from Atmel say Yes and it
|
|
will be accessible from within Linux. To compile this driver
|
|
as a module, choose M here; the module will be called tpm_atmel.
|
|
|
|
config TCG_INFINEON
|
|
tristate "Infineon Technologies TPM Interface"
|
|
depends on PNP
|
|
---help---
|
|
If you have a TPM security chip from Infineon Technologies
|
|
(either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it
|
|
will be accessible from within Linux.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called tpm_infineon.
|
|
Further information on this driver and the supported hardware
|
|
can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
|
|
|
|
config TCG_IBMVTPM
|
|
tristate "IBM VTPM Interface"
|
|
depends on PPC_PSERIES
|
|
---help---
|
|
If you have IBM virtual TPM (VTPM) support say Yes and it
|
|
will be accessible from within Linux. To compile this driver
|
|
as a module, choose M here; the module will be called tpm_ibmvtpm.
|
|
|
|
config TCG_XEN
|
|
tristate "XEN TPM Interface"
|
|
depends on TCG_TPM && XEN
|
|
select XEN_XENBUS_FRONTEND
|
|
---help---
|
|
If you want to make TPM support available to a Xen user domain,
|
|
say Yes and it will be accessible from within Linux. See
|
|
the manpages for xl, xl.conf, and docs/misc/vtpm.txt in
|
|
the Xen source repository for more details.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called xen-tpmfront.
|
|
|
|
config TCG_CRB
|
|
tristate "TPM 2.0 CRB Interface"
|
|
depends on ACPI
|
|
---help---
|
|
If you have a TPM security chip that is compliant with the
|
|
TCG CRB 2.0 TPM specification say Yes and it will be accessible
|
|
from within Linux. To compile this driver as a module, choose
|
|
M here; the module will be called tpm_crb.
|
|
|
|
config TCG_VTPM_PROXY
|
|
tristate "VTPM Proxy Interface"
|
|
depends on TCG_TPM
|
|
---help---
|
|
This driver proxies for an emulated TPM (vTPM) running in userspace.
|
|
A device /dev/vtpmx is provided that creates a device pair
|
|
/dev/vtpmX and a server-side file descriptor on which the vTPM
|
|
can receive commands.
|
|
|
|
config TCG_FTPM_TEE
|
|
tristate "TEE based fTPM Interface"
|
|
depends on TEE && OPTEE
|
|
help
|
|
This driver proxies for firmware TPM running in TEE.
|
|
|
|
source "drivers/char/tpm/st33zp24/Kconfig"
|
|
endif # TCG_TPM
|