mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 04:45:12 +07:00
c1516f840d
This patch adds device tree support for mfd driver and adds Documentation/devicetree/bindings/mfd/max77686.txt. This patch also intialize max77686 pointer to NULL in max77686_i2c_probe to silent a compile time warning. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
60 lines
1.9 KiB
Plaintext
60 lines
1.9 KiB
Plaintext
Maxim MAX77686 multi-function device
|
|
|
|
MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is
|
|
interfaced to host controller using i2c interface. PMIC and Charger submodules
|
|
are addressed using same i2c slave address whereas RTC submodule uses
|
|
different i2c slave address,presently for which we are statically creating i2c
|
|
client while probing.This document describes the binding for mfd device and
|
|
PMIC submodule.
|
|
|
|
Required properties:
|
|
- compatible : Must be "maxim,max77686";
|
|
- reg : Specifies the i2c slave address of PMIC block.
|
|
- interrupts : This i2c device has an IRQ line connected to the main SoC.
|
|
- interrupt-parent : The parent interrupt controller.
|
|
|
|
Optional node:
|
|
- voltage-regulators : The regulators of max77686 have to be instantiated
|
|
under subnode named "voltage-regulators" using the following format.
|
|
|
|
regulator_name {
|
|
regulator-compatible = LDOn/BUCKn
|
|
standard regulator constraints....
|
|
};
|
|
refer Documentation/devicetree/bindings/regulator/regulator.txt
|
|
|
|
The regulator-compatible property of regulator should initialized with string
|
|
to get matched with their hardware counterparts as follow:
|
|
|
|
-LDOn : for LDOs, where n can lie in range 1 to 26.
|
|
example: LDO1, LDO2, LDO26.
|
|
-BUCKn : for BUCKs, where n can lie in range 1 to 9.
|
|
example: BUCK1, BUCK5, BUCK9.
|
|
|
|
Example:
|
|
|
|
max77686@09 {
|
|
compatible = "maxim,max77686";
|
|
interrupt-parent = <&wakeup_eint>;
|
|
interrupts = <26 0>;
|
|
reg = <0x09>;
|
|
|
|
voltage-regulators {
|
|
ldo11_reg {
|
|
regulator-compatible = "LDO11";
|
|
regulator-name = "vdd_ldo11";
|
|
regulator-min-microvolt = <1900000>;
|
|
regulator-max-microvolt = <1900000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck1_reg {
|
|
regulator-compatible = "BUCK1";
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
}
|