mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 05:24:59 +07:00
bace41f80f
Mechanical switch from the legacy "mode" enumeration to the new "engine type" enumeration in drivers and board files. The device tree parsing is also updated to return the new enumeration from the old strings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
1080 lines
25 KiB
C
1080 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright © 2009 - Maxim Levitsky
|
|
* driver for Ricoh xD readers
|
|
*/
|
|
|
|
#define DRV_NAME "r852"
|
|
#define pr_fmt(fmt) DRV_NAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/sched.h>
|
|
#include "sm_common.h"
|
|
#include "r852.h"
|
|
|
|
|
|
static bool r852_enable_dma = 1;
|
|
module_param(r852_enable_dma, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)");
|
|
|
|
static int debug;
|
|
module_param(debug, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug level (0-2)");
|
|
|
|
/* read register */
|
|
static inline uint8_t r852_read_reg(struct r852_device *dev, int address)
|
|
{
|
|
uint8_t reg = readb(dev->mmio + address);
|
|
return reg;
|
|
}
|
|
|
|
/* write register */
|
|
static inline void r852_write_reg(struct r852_device *dev,
|
|
int address, uint8_t value)
|
|
{
|
|
writeb(value, dev->mmio + address);
|
|
}
|
|
|
|
|
|
/* read dword sized register */
|
|
static inline uint32_t r852_read_reg_dword(struct r852_device *dev, int address)
|
|
{
|
|
uint32_t reg = le32_to_cpu(readl(dev->mmio + address));
|
|
return reg;
|
|
}
|
|
|
|
/* write dword sized register */
|
|
static inline void r852_write_reg_dword(struct r852_device *dev,
|
|
int address, uint32_t value)
|
|
{
|
|
writel(cpu_to_le32(value), dev->mmio + address);
|
|
}
|
|
|
|
/* returns pointer to our private structure */
|
|
static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *chip = mtd_to_nand(mtd);
|
|
return nand_get_controller_data(chip);
|
|
}
|
|
|
|
|
|
/* check if controller supports dma */
|
|
static void r852_dma_test(struct r852_device *dev)
|
|
{
|
|
dev->dma_usable = (r852_read_reg(dev, R852_DMA_CAP) &
|
|
(R852_DMA1 | R852_DMA2)) == (R852_DMA1 | R852_DMA2);
|
|
|
|
if (!dev->dma_usable)
|
|
message("Non dma capable device detected, dma disabled");
|
|
|
|
if (!r852_enable_dma) {
|
|
message("disabling dma on user request");
|
|
dev->dma_usable = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Enable dma. Enables ether first or second stage of the DMA,
|
|
* Expects dev->dma_dir and dev->dma_state be set
|
|
*/
|
|
static void r852_dma_enable(struct r852_device *dev)
|
|
{
|
|
uint8_t dma_reg, dma_irq_reg;
|
|
|
|
/* Set up dma settings */
|
|
dma_reg = r852_read_reg_dword(dev, R852_DMA_SETTINGS);
|
|
dma_reg &= ~(R852_DMA_READ | R852_DMA_INTERNAL | R852_DMA_MEMORY);
|
|
|
|
if (dev->dma_dir)
|
|
dma_reg |= R852_DMA_READ;
|
|
|
|
if (dev->dma_state == DMA_INTERNAL) {
|
|
dma_reg |= R852_DMA_INTERNAL;
|
|
/* Precaution to make sure HW doesn't write */
|
|
/* to random kernel memory */
|
|
r852_write_reg_dword(dev, R852_DMA_ADDR,
|
|
cpu_to_le32(dev->phys_bounce_buffer));
|
|
} else {
|
|
dma_reg |= R852_DMA_MEMORY;
|
|
r852_write_reg_dword(dev, R852_DMA_ADDR,
|
|
cpu_to_le32(dev->phys_dma_addr));
|
|
}
|
|
|
|
/* Precaution: make sure write reached the device */
|
|
r852_read_reg_dword(dev, R852_DMA_ADDR);
|
|
|
|
r852_write_reg_dword(dev, R852_DMA_SETTINGS, dma_reg);
|
|
|
|
/* Set dma irq */
|
|
dma_irq_reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
|
|
r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
|
|
dma_irq_reg |
|
|
R852_DMA_IRQ_INTERNAL |
|
|
R852_DMA_IRQ_ERROR |
|
|
R852_DMA_IRQ_MEMORY);
|
|
}
|
|
|
|
/*
|
|
* Disable dma, called from the interrupt handler, which specifies
|
|
* success of the operation via 'error' argument
|
|
*/
|
|
static void r852_dma_done(struct r852_device *dev, int error)
|
|
{
|
|
WARN_ON(dev->dma_stage == 0);
|
|
|
|
r852_write_reg_dword(dev, R852_DMA_IRQ_STA,
|
|
r852_read_reg_dword(dev, R852_DMA_IRQ_STA));
|
|
|
|
r852_write_reg_dword(dev, R852_DMA_SETTINGS, 0);
|
|
r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, 0);
|
|
|
|
/* Precaution to make sure HW doesn't write to random kernel memory */
|
|
r852_write_reg_dword(dev, R852_DMA_ADDR,
|
|
cpu_to_le32(dev->phys_bounce_buffer));
|
|
r852_read_reg_dword(dev, R852_DMA_ADDR);
|
|
|
|
dev->dma_error = error;
|
|
dev->dma_stage = 0;
|
|
|
|
if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
|
|
dma_unmap_single(&dev->pci_dev->dev, dev->phys_dma_addr,
|
|
R852_DMA_LEN,
|
|
dev->dma_dir ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
|
|
}
|
|
|
|
/*
|
|
* Wait, till dma is done, which includes both phases of it
|
|
*/
|
|
static int r852_dma_wait(struct r852_device *dev)
|
|
{
|
|
long timeout = wait_for_completion_timeout(&dev->dma_done,
|
|
msecs_to_jiffies(1000));
|
|
if (!timeout) {
|
|
dbg("timeout waiting for DMA interrupt");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read/Write one page using dma. Only pages can be read (512 bytes)
|
|
*/
|
|
static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
|
|
{
|
|
int bounce = 0;
|
|
unsigned long flags;
|
|
int error;
|
|
|
|
dev->dma_error = 0;
|
|
|
|
/* Set dma direction */
|
|
dev->dma_dir = do_read;
|
|
dev->dma_stage = 1;
|
|
reinit_completion(&dev->dma_done);
|
|
|
|
dbg_verbose("doing dma %s ", do_read ? "read" : "write");
|
|
|
|
/* Set initial dma state: for reading first fill on board buffer,
|
|
from device, for writes first fill the buffer from memory*/
|
|
dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
|
|
|
|
/* if incoming buffer is not page aligned, we should do bounce */
|
|
if ((unsigned long)buf & (R852_DMA_LEN-1))
|
|
bounce = 1;
|
|
|
|
if (!bounce) {
|
|
dev->phys_dma_addr = dma_map_single(&dev->pci_dev->dev, buf,
|
|
R852_DMA_LEN,
|
|
do_read ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
|
|
if (dma_mapping_error(&dev->pci_dev->dev, dev->phys_dma_addr))
|
|
bounce = 1;
|
|
}
|
|
|
|
if (bounce) {
|
|
dbg_verbose("dma: using bounce buffer");
|
|
dev->phys_dma_addr = dev->phys_bounce_buffer;
|
|
if (!do_read)
|
|
memcpy(dev->bounce_buffer, buf, R852_DMA_LEN);
|
|
}
|
|
|
|
/* Enable DMA */
|
|
spin_lock_irqsave(&dev->irqlock, flags);
|
|
r852_dma_enable(dev);
|
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
|
|
|
/* Wait till complete */
|
|
error = r852_dma_wait(dev);
|
|
|
|
if (error) {
|
|
r852_dma_done(dev, error);
|
|
return;
|
|
}
|
|
|
|
if (do_read && bounce)
|
|
memcpy((void *)buf, dev->bounce_buffer, R852_DMA_LEN);
|
|
}
|
|
|
|
/*
|
|
* Program data lines of the nand chip to send data to it
|
|
*/
|
|
static void r852_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
|
|
{
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
uint32_t reg;
|
|
|
|
/* Don't allow any access to hardware if we suspect card removal */
|
|
if (dev->card_unstable)
|
|
return;
|
|
|
|
/* Special case for whole sector read */
|
|
if (len == R852_DMA_LEN && dev->dma_usable) {
|
|
r852_do_dma(dev, (uint8_t *)buf, 0);
|
|
return;
|
|
}
|
|
|
|
/* write DWORD chinks - faster */
|
|
while (len >= 4) {
|
|
reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24;
|
|
r852_write_reg_dword(dev, R852_DATALINE, reg);
|
|
buf += 4;
|
|
len -= 4;
|
|
|
|
}
|
|
|
|
/* write rest */
|
|
while (len > 0) {
|
|
r852_write_reg(dev, R852_DATALINE, *buf++);
|
|
len--;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read data lines of the nand chip to retrieve data
|
|
*/
|
|
static void r852_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
|
|
{
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
uint32_t reg;
|
|
|
|
if (dev->card_unstable) {
|
|
/* since we can't signal error here, at least, return
|
|
predictable buffer */
|
|
memset(buf, 0, len);
|
|
return;
|
|
}
|
|
|
|
/* special case for whole sector read */
|
|
if (len == R852_DMA_LEN && dev->dma_usable) {
|
|
r852_do_dma(dev, buf, 1);
|
|
return;
|
|
}
|
|
|
|
/* read in dword sized chunks */
|
|
while (len >= 4) {
|
|
|
|
reg = r852_read_reg_dword(dev, R852_DATALINE);
|
|
*buf++ = reg & 0xFF;
|
|
*buf++ = (reg >> 8) & 0xFF;
|
|
*buf++ = (reg >> 16) & 0xFF;
|
|
*buf++ = (reg >> 24) & 0xFF;
|
|
len -= 4;
|
|
}
|
|
|
|
/* read the reset by bytes */
|
|
while (len--)
|
|
*buf++ = r852_read_reg(dev, R852_DATALINE);
|
|
}
|
|
|
|
/*
|
|
* Read one byte from nand chip
|
|
*/
|
|
static uint8_t r852_read_byte(struct nand_chip *chip)
|
|
{
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
|
|
/* Same problem as in r852_read_buf.... */
|
|
if (dev->card_unstable)
|
|
return 0;
|
|
|
|
return r852_read_reg(dev, R852_DATALINE);
|
|
}
|
|
|
|
/*
|
|
* Control several chip lines & send commands
|
|
*/
|
|
static void r852_cmdctl(struct nand_chip *chip, int dat, unsigned int ctrl)
|
|
{
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
|
|
if (dev->card_unstable)
|
|
return;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
|
|
dev->ctlreg &= ~(R852_CTL_DATA | R852_CTL_COMMAND |
|
|
R852_CTL_ON | R852_CTL_CARDENABLE);
|
|
|
|
if (ctrl & NAND_ALE)
|
|
dev->ctlreg |= R852_CTL_DATA;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
dev->ctlreg |= R852_CTL_COMMAND;
|
|
|
|
if (ctrl & NAND_NCE)
|
|
dev->ctlreg |= (R852_CTL_CARDENABLE | R852_CTL_ON);
|
|
else
|
|
dev->ctlreg &= ~R852_CTL_WRITE;
|
|
|
|
/* when write is stareted, enable write access */
|
|
if (dat == NAND_CMD_ERASE1)
|
|
dev->ctlreg |= R852_CTL_WRITE;
|
|
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
|
}
|
|
|
|
/* HACK: NAND_CMD_SEQIN is called without NAND_CTRL_CHANGE, but we need
|
|
to set write mode */
|
|
if (dat == NAND_CMD_SEQIN && (dev->ctlreg & R852_CTL_COMMAND)) {
|
|
dev->ctlreg |= R852_CTL_WRITE;
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
|
}
|
|
|
|
if (dat != NAND_CMD_NONE)
|
|
r852_write_reg(dev, R852_DATALINE, dat);
|
|
}
|
|
|
|
/*
|
|
* Wait till card is ready.
|
|
* based on nand_wait, but returns errors on DMA error
|
|
*/
|
|
static int r852_wait(struct nand_chip *chip)
|
|
{
|
|
struct r852_device *dev = nand_get_controller_data(chip);
|
|
|
|
unsigned long timeout;
|
|
u8 status;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(400);
|
|
|
|
while (time_before(jiffies, timeout))
|
|
if (chip->legacy.dev_ready(chip))
|
|
break;
|
|
|
|
nand_status_op(chip, &status);
|
|
|
|
/* Unfortunelly, no way to send detailed error status... */
|
|
if (dev->dma_error) {
|
|
status |= NAND_STATUS_FAIL;
|
|
dev->dma_error = 0;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Check if card is ready
|
|
*/
|
|
|
|
static int r852_ready(struct nand_chip *chip)
|
|
{
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY);
|
|
}
|
|
|
|
|
|
/*
|
|
* Set ECC engine mode
|
|
*/
|
|
|
|
static void r852_ecc_hwctl(struct nand_chip *chip, int mode)
|
|
{
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
|
|
if (dev->card_unstable)
|
|
return;
|
|
|
|
switch (mode) {
|
|
case NAND_ECC_READ:
|
|
case NAND_ECC_WRITE:
|
|
/* enable ecc generation/check*/
|
|
dev->ctlreg |= R852_CTL_ECC_ENABLE;
|
|
|
|
/* flush ecc buffer */
|
|
r852_write_reg(dev, R852_CTL,
|
|
dev->ctlreg | R852_CTL_ECC_ACCESS);
|
|
|
|
r852_read_reg_dword(dev, R852_DATALINE);
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
|
return;
|
|
|
|
case NAND_ECC_READSYN:
|
|
/* disable ecc generation */
|
|
dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Calculate ECC, only used for writes
|
|
*/
|
|
|
|
static int r852_ecc_calculate(struct nand_chip *chip, const uint8_t *dat,
|
|
uint8_t *ecc_code)
|
|
{
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
struct sm_oob *oob = (struct sm_oob *)ecc_code;
|
|
uint32_t ecc1, ecc2;
|
|
|
|
if (dev->card_unstable)
|
|
return 0;
|
|
|
|
dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
|
|
|
|
ecc1 = r852_read_reg_dword(dev, R852_DATALINE);
|
|
ecc2 = r852_read_reg_dword(dev, R852_DATALINE);
|
|
|
|
oob->ecc1[0] = (ecc1) & 0xFF;
|
|
oob->ecc1[1] = (ecc1 >> 8) & 0xFF;
|
|
oob->ecc1[2] = (ecc1 >> 16) & 0xFF;
|
|
|
|
oob->ecc2[0] = (ecc2) & 0xFF;
|
|
oob->ecc2[1] = (ecc2 >> 8) & 0xFF;
|
|
oob->ecc2[2] = (ecc2 >> 16) & 0xFF;
|
|
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Correct the data using ECC, hw did almost everything for us
|
|
*/
|
|
|
|
static int r852_ecc_correct(struct nand_chip *chip, uint8_t *dat,
|
|
uint8_t *read_ecc, uint8_t *calc_ecc)
|
|
{
|
|
uint32_t ecc_reg;
|
|
uint8_t ecc_status, err_byte;
|
|
int i, error = 0;
|
|
|
|
struct r852_device *dev = r852_get_dev(nand_to_mtd(chip));
|
|
|
|
if (dev->card_unstable)
|
|
return 0;
|
|
|
|
if (dev->dma_error) {
|
|
dev->dma_error = 0;
|
|
return -EIO;
|
|
}
|
|
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
|
|
ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
|
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
|
|
|
for (i = 0 ; i <= 1 ; i++) {
|
|
|
|
ecc_status = (ecc_reg >> 8) & 0xFF;
|
|
|
|
/* ecc uncorrectable error */
|
|
if (ecc_status & R852_ECC_FAIL) {
|
|
dbg("ecc: unrecoverable error, in half %d", i);
|
|
error = -EBADMSG;
|
|
goto exit;
|
|
}
|
|
|
|
/* correctable error */
|
|
if (ecc_status & R852_ECC_CORRECTABLE) {
|
|
|
|
err_byte = ecc_reg & 0xFF;
|
|
dbg("ecc: recoverable error, "
|
|
"in half %d, byte %d, bit %d", i,
|
|
err_byte, ecc_status & R852_ECC_ERR_BIT_MSK);
|
|
|
|
dat[err_byte] ^=
|
|
1 << (ecc_status & R852_ECC_ERR_BIT_MSK);
|
|
error++;
|
|
}
|
|
|
|
dat += 256;
|
|
ecc_reg >>= 16;
|
|
}
|
|
exit:
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* This is copy of nand_read_oob_std
|
|
* nand_read_oob_syndrome assumes we can send column address - we can't
|
|
*/
|
|
static int r852_read_oob(struct nand_chip *chip, int page)
|
|
{
|
|
struct mtd_info *mtd = nand_to_mtd(chip);
|
|
|
|
return nand_read_oob_op(chip, page, 0, chip->oob_poi, mtd->oobsize);
|
|
}
|
|
|
|
/*
|
|
* Start the nand engine
|
|
*/
|
|
|
|
static void r852_engine_enable(struct r852_device *dev)
|
|
{
|
|
if (r852_read_reg_dword(dev, R852_HW) & R852_HW_UNKNOWN) {
|
|
r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
|
|
r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
|
|
} else {
|
|
r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
|
|
r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
|
|
}
|
|
msleep(300);
|
|
r852_write_reg(dev, R852_CTL, 0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Stop the nand engine
|
|
*/
|
|
|
|
static void r852_engine_disable(struct r852_device *dev)
|
|
{
|
|
r852_write_reg_dword(dev, R852_HW, 0);
|
|
r852_write_reg(dev, R852_CTL, R852_CTL_RESET);
|
|
}
|
|
|
|
/*
|
|
* Test if card is present
|
|
*/
|
|
|
|
static void r852_card_update_present(struct r852_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
uint8_t reg;
|
|
|
|
spin_lock_irqsave(&dev->irqlock, flags);
|
|
reg = r852_read_reg(dev, R852_CARD_STA);
|
|
dev->card_detected = !!(reg & R852_CARD_STA_PRESENT);
|
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
|
}
|
|
|
|
/*
|
|
* Update card detection IRQ state according to current card state
|
|
* which is read in r852_card_update_present
|
|
*/
|
|
static void r852_update_card_detect(struct r852_device *dev)
|
|
{
|
|
int card_detect_reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
|
|
dev->card_unstable = 0;
|
|
|
|
card_detect_reg &= ~(R852_CARD_IRQ_REMOVE | R852_CARD_IRQ_INSERT);
|
|
card_detect_reg |= R852_CARD_IRQ_GENABLE;
|
|
|
|
card_detect_reg |= dev->card_detected ?
|
|
R852_CARD_IRQ_REMOVE : R852_CARD_IRQ_INSERT;
|
|
|
|
r852_write_reg(dev, R852_CARD_IRQ_ENABLE, card_detect_reg);
|
|
}
|
|
|
|
static ssize_t r852_media_type_show(struct device *sys_dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mtd_info *mtd = container_of(sys_dev, struct mtd_info, dev);
|
|
struct r852_device *dev = r852_get_dev(mtd);
|
|
char *data = dev->sm ? "smartmedia" : "xd";
|
|
|
|
strcpy(buf, data);
|
|
return strlen(data);
|
|
}
|
|
|
|
static DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL);
|
|
|
|
|
|
/* Detect properties of card in slot */
|
|
static void r852_update_media_status(struct r852_device *dev)
|
|
{
|
|
uint8_t reg;
|
|
unsigned long flags;
|
|
int readonly;
|
|
|
|
spin_lock_irqsave(&dev->irqlock, flags);
|
|
if (!dev->card_detected) {
|
|
message("card removed");
|
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
|
return ;
|
|
}
|
|
|
|
readonly = r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_RO;
|
|
reg = r852_read_reg(dev, R852_DMA_CAP);
|
|
dev->sm = (reg & (R852_DMA1 | R852_DMA2)) && (reg & R852_SMBIT);
|
|
|
|
message("detected %s %s card in slot",
|
|
dev->sm ? "SmartMedia" : "xD",
|
|
readonly ? "readonly" : "writeable");
|
|
|
|
dev->readonly = readonly;
|
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
|
}
|
|
|
|
/*
|
|
* Register the nand device
|
|
* Called when the card is detected
|
|
*/
|
|
static int r852_register_nand_device(struct r852_device *dev)
|
|
{
|
|
struct mtd_info *mtd = nand_to_mtd(dev->chip);
|
|
|
|
WARN_ON(dev->card_registered);
|
|
|
|
mtd->dev.parent = &dev->pci_dev->dev;
|
|
|
|
if (dev->readonly)
|
|
dev->chip->options |= NAND_ROM;
|
|
|
|
r852_engine_enable(dev);
|
|
|
|
if (sm_register_device(mtd, dev->sm))
|
|
goto error1;
|
|
|
|
if (device_create_file(&mtd->dev, &dev_attr_media_type)) {
|
|
message("can't create media type sysfs attribute");
|
|
goto error3;
|
|
}
|
|
|
|
dev->card_registered = 1;
|
|
return 0;
|
|
error3:
|
|
WARN_ON(mtd_device_unregister(nand_to_mtd(dev->chip)));
|
|
nand_cleanup(dev->chip);
|
|
error1:
|
|
/* Force card redetect */
|
|
dev->card_detected = 0;
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Unregister the card
|
|
*/
|
|
|
|
static void r852_unregister_nand_device(struct r852_device *dev)
|
|
{
|
|
struct mtd_info *mtd = nand_to_mtd(dev->chip);
|
|
|
|
if (!dev->card_registered)
|
|
return;
|
|
|
|
device_remove_file(&mtd->dev, &dev_attr_media_type);
|
|
WARN_ON(mtd_device_unregister(mtd));
|
|
nand_cleanup(dev->chip);
|
|
r852_engine_disable(dev);
|
|
dev->card_registered = 0;
|
|
}
|
|
|
|
/* Card state updater */
|
|
static void r852_card_detect_work(struct work_struct *work)
|
|
{
|
|
struct r852_device *dev =
|
|
container_of(work, struct r852_device, card_detect_work.work);
|
|
|
|
r852_card_update_present(dev);
|
|
r852_update_card_detect(dev);
|
|
dev->card_unstable = 0;
|
|
|
|
/* False alarm */
|
|
if (dev->card_detected == dev->card_registered)
|
|
goto exit;
|
|
|
|
/* Read media properties */
|
|
r852_update_media_status(dev);
|
|
|
|
/* Register the card */
|
|
if (dev->card_detected)
|
|
r852_register_nand_device(dev);
|
|
else
|
|
r852_unregister_nand_device(dev);
|
|
exit:
|
|
r852_update_card_detect(dev);
|
|
}
|
|
|
|
/* Ack + disable IRQ generation */
|
|
static void r852_disable_irqs(struct r852_device *dev)
|
|
{
|
|
uint8_t reg;
|
|
reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
|
|
r852_write_reg(dev, R852_CARD_IRQ_ENABLE, reg & ~R852_CARD_IRQ_MASK);
|
|
|
|
reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
|
|
r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
|
|
reg & ~R852_DMA_IRQ_MASK);
|
|
|
|
r852_write_reg(dev, R852_CARD_IRQ_STA, R852_CARD_IRQ_MASK);
|
|
r852_write_reg_dword(dev, R852_DMA_IRQ_STA, R852_DMA_IRQ_MASK);
|
|
}
|
|
|
|
/* Interrupt handler */
|
|
static irqreturn_t r852_irq(int irq, void *data)
|
|
{
|
|
struct r852_device *dev = (struct r852_device *)data;
|
|
|
|
uint8_t card_status, dma_status;
|
|
unsigned long flags;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
spin_lock_irqsave(&dev->irqlock, flags);
|
|
|
|
/* handle card detection interrupts first */
|
|
card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
|
|
r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
|
|
|
|
if (card_status & (R852_CARD_IRQ_INSERT|R852_CARD_IRQ_REMOVE)) {
|
|
|
|
ret = IRQ_HANDLED;
|
|
dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
|
|
|
|
/* we shouldn't receive any interrupts if we wait for card
|
|
to settle */
|
|
WARN_ON(dev->card_unstable);
|
|
|
|
/* disable irqs while card is unstable */
|
|
/* this will timeout DMA if active, but better that garbage */
|
|
r852_disable_irqs(dev);
|
|
|
|
if (dev->card_unstable)
|
|
goto out;
|
|
|
|
/* let, card state to settle a bit, and then do the work */
|
|
dev->card_unstable = 1;
|
|
queue_delayed_work(dev->card_workqueue,
|
|
&dev->card_detect_work, msecs_to_jiffies(100));
|
|
goto out;
|
|
}
|
|
|
|
|
|
/* Handle dma interrupts */
|
|
dma_status = r852_read_reg_dword(dev, R852_DMA_IRQ_STA);
|
|
r852_write_reg_dword(dev, R852_DMA_IRQ_STA, dma_status);
|
|
|
|
if (dma_status & R852_DMA_IRQ_MASK) {
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
if (dma_status & R852_DMA_IRQ_ERROR) {
|
|
dbg("received dma error IRQ");
|
|
r852_dma_done(dev, -EIO);
|
|
complete(&dev->dma_done);
|
|
goto out;
|
|
}
|
|
|
|
/* received DMA interrupt out of nowhere? */
|
|
WARN_ON_ONCE(dev->dma_stage == 0);
|
|
|
|
if (dev->dma_stage == 0)
|
|
goto out;
|
|
|
|
/* done device access */
|
|
if (dev->dma_state == DMA_INTERNAL &&
|
|
(dma_status & R852_DMA_IRQ_INTERNAL)) {
|
|
|
|
dev->dma_state = DMA_MEMORY;
|
|
dev->dma_stage++;
|
|
}
|
|
|
|
/* done memory DMA */
|
|
if (dev->dma_state == DMA_MEMORY &&
|
|
(dma_status & R852_DMA_IRQ_MEMORY)) {
|
|
dev->dma_state = DMA_INTERNAL;
|
|
dev->dma_stage++;
|
|
}
|
|
|
|
/* Enable 2nd half of dma dance */
|
|
if (dev->dma_stage == 2)
|
|
r852_dma_enable(dev);
|
|
|
|
/* Operation done */
|
|
if (dev->dma_stage == 3) {
|
|
r852_dma_done(dev, 0);
|
|
complete(&dev->dma_done);
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
/* Handle unknown interrupts */
|
|
if (dma_status)
|
|
dbg("bad dma IRQ status = %x", dma_status);
|
|
|
|
if (card_status & ~R852_CARD_STA_CD)
|
|
dbg("strange card status = %x", card_status);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
|
|
{
|
|
int error;
|
|
struct nand_chip *chip;
|
|
struct r852_device *dev;
|
|
|
|
/* pci initialization */
|
|
error = pci_enable_device(pci_dev);
|
|
|
|
if (error)
|
|
goto error1;
|
|
|
|
pci_set_master(pci_dev);
|
|
|
|
error = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32));
|
|
if (error)
|
|
goto error2;
|
|
|
|
error = pci_request_regions(pci_dev, DRV_NAME);
|
|
|
|
if (error)
|
|
goto error3;
|
|
|
|
error = -ENOMEM;
|
|
|
|
/* init nand chip, but register it only on card insert */
|
|
chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
|
|
|
|
if (!chip)
|
|
goto error4;
|
|
|
|
/* commands */
|
|
chip->legacy.cmd_ctrl = r852_cmdctl;
|
|
chip->legacy.waitfunc = r852_wait;
|
|
chip->legacy.dev_ready = r852_ready;
|
|
|
|
/* I/O */
|
|
chip->legacy.read_byte = r852_read_byte;
|
|
chip->legacy.read_buf = r852_read_buf;
|
|
chip->legacy.write_buf = r852_write_buf;
|
|
|
|
/* ecc */
|
|
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
|
|
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
|
|
chip->ecc.size = R852_DMA_LEN;
|
|
chip->ecc.bytes = SM_OOB_SIZE;
|
|
chip->ecc.strength = 2;
|
|
chip->ecc.hwctl = r852_ecc_hwctl;
|
|
chip->ecc.calculate = r852_ecc_calculate;
|
|
chip->ecc.correct = r852_ecc_correct;
|
|
|
|
/* TODO: hack */
|
|
chip->ecc.read_oob = r852_read_oob;
|
|
|
|
/* init our device structure */
|
|
dev = kzalloc(sizeof(struct r852_device), GFP_KERNEL);
|
|
|
|
if (!dev)
|
|
goto error5;
|
|
|
|
nand_set_controller_data(chip, dev);
|
|
dev->chip = chip;
|
|
dev->pci_dev = pci_dev;
|
|
pci_set_drvdata(pci_dev, dev);
|
|
|
|
dev->bounce_buffer = dma_alloc_coherent(&pci_dev->dev, R852_DMA_LEN,
|
|
&dev->phys_bounce_buffer, GFP_KERNEL);
|
|
|
|
if (!dev->bounce_buffer)
|
|
goto error6;
|
|
|
|
|
|
error = -ENODEV;
|
|
dev->mmio = pci_ioremap_bar(pci_dev, 0);
|
|
|
|
if (!dev->mmio)
|
|
goto error7;
|
|
|
|
error = -ENOMEM;
|
|
dev->tmp_buffer = kzalloc(SM_SECTOR_SIZE, GFP_KERNEL);
|
|
|
|
if (!dev->tmp_buffer)
|
|
goto error8;
|
|
|
|
init_completion(&dev->dma_done);
|
|
|
|
dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
|
|
|
|
if (!dev->card_workqueue)
|
|
goto error9;
|
|
|
|
INIT_DELAYED_WORK(&dev->card_detect_work, r852_card_detect_work);
|
|
|
|
/* shutdown everything - precation */
|
|
r852_engine_disable(dev);
|
|
r852_disable_irqs(dev);
|
|
|
|
r852_dma_test(dev);
|
|
|
|
dev->irq = pci_dev->irq;
|
|
spin_lock_init(&dev->irqlock);
|
|
|
|
dev->card_detected = 0;
|
|
r852_card_update_present(dev);
|
|
|
|
/*register irq handler*/
|
|
error = -ENODEV;
|
|
if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
|
|
DRV_NAME, dev))
|
|
goto error10;
|
|
|
|
/* kick initial present test */
|
|
queue_delayed_work(dev->card_workqueue,
|
|
&dev->card_detect_work, 0);
|
|
|
|
|
|
pr_notice("driver loaded successfully\n");
|
|
return 0;
|
|
|
|
error10:
|
|
destroy_workqueue(dev->card_workqueue);
|
|
error9:
|
|
kfree(dev->tmp_buffer);
|
|
error8:
|
|
pci_iounmap(pci_dev, dev->mmio);
|
|
error7:
|
|
dma_free_coherent(&pci_dev->dev, R852_DMA_LEN, dev->bounce_buffer,
|
|
dev->phys_bounce_buffer);
|
|
error6:
|
|
kfree(dev);
|
|
error5:
|
|
kfree(chip);
|
|
error4:
|
|
pci_release_regions(pci_dev);
|
|
error3:
|
|
error2:
|
|
pci_disable_device(pci_dev);
|
|
error1:
|
|
return error;
|
|
}
|
|
|
|
static void r852_remove(struct pci_dev *pci_dev)
|
|
{
|
|
struct r852_device *dev = pci_get_drvdata(pci_dev);
|
|
|
|
/* Stop detect workqueue -
|
|
we are going to unregister the device anyway*/
|
|
cancel_delayed_work_sync(&dev->card_detect_work);
|
|
destroy_workqueue(dev->card_workqueue);
|
|
|
|
/* Unregister the device, this might make more IO */
|
|
r852_unregister_nand_device(dev);
|
|
|
|
/* Stop interrupts */
|
|
r852_disable_irqs(dev);
|
|
free_irq(dev->irq, dev);
|
|
|
|
/* Cleanup */
|
|
kfree(dev->tmp_buffer);
|
|
pci_iounmap(pci_dev, dev->mmio);
|
|
dma_free_coherent(&pci_dev->dev, R852_DMA_LEN, dev->bounce_buffer,
|
|
dev->phys_bounce_buffer);
|
|
|
|
kfree(dev->chip);
|
|
kfree(dev);
|
|
|
|
/* Shutdown the PCI device */
|
|
pci_release_regions(pci_dev);
|
|
pci_disable_device(pci_dev);
|
|
}
|
|
|
|
static void r852_shutdown(struct pci_dev *pci_dev)
|
|
{
|
|
struct r852_device *dev = pci_get_drvdata(pci_dev);
|
|
|
|
cancel_delayed_work_sync(&dev->card_detect_work);
|
|
r852_disable_irqs(dev);
|
|
synchronize_irq(dev->irq);
|
|
pci_disable_device(pci_dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int r852_suspend(struct device *device)
|
|
{
|
|
struct r852_device *dev = dev_get_drvdata(device);
|
|
|
|
if (dev->ctlreg & R852_CTL_CARDENABLE)
|
|
return -EBUSY;
|
|
|
|
/* First make sure the detect work is gone */
|
|
cancel_delayed_work_sync(&dev->card_detect_work);
|
|
|
|
/* Turn off the interrupts and stop the device */
|
|
r852_disable_irqs(dev);
|
|
r852_engine_disable(dev);
|
|
|
|
/* If card was pulled off just during the suspend, which is very
|
|
unlikely, we will remove it on resume, it too late now
|
|
anyway... */
|
|
dev->card_unstable = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int r852_resume(struct device *device)
|
|
{
|
|
struct r852_device *dev = dev_get_drvdata(device);
|
|
|
|
r852_disable_irqs(dev);
|
|
r852_card_update_present(dev);
|
|
r852_engine_disable(dev);
|
|
|
|
|
|
/* If card status changed, just do the work */
|
|
if (dev->card_detected != dev->card_registered) {
|
|
dbg("card was %s during low power state",
|
|
dev->card_detected ? "added" : "removed");
|
|
|
|
queue_delayed_work(dev->card_workqueue,
|
|
&dev->card_detect_work, msecs_to_jiffies(1000));
|
|
return 0;
|
|
}
|
|
|
|
/* Otherwise, initialize the card */
|
|
if (dev->card_registered) {
|
|
r852_engine_enable(dev);
|
|
nand_select_target(dev->chip, 0);
|
|
nand_reset_op(dev->chip);
|
|
nand_deselect_target(dev->chip);
|
|
}
|
|
|
|
/* Program card detection IRQ */
|
|
r852_update_card_detect(dev);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id r852_pci_id_tbl[] = {
|
|
|
|
{ PCI_VDEVICE(RICOH, 0x0852), },
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
|
|
|
|
static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
|
|
|
|
static struct pci_driver r852_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = r852_pci_id_tbl,
|
|
.probe = r852_probe,
|
|
.remove = r852_remove,
|
|
.shutdown = r852_shutdown,
|
|
.driver.pm = &r852_pm_ops,
|
|
};
|
|
|
|
module_pci_driver(r852_pci_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
|
|
MODULE_DESCRIPTION("Ricoh 85xx xD/smartmedia card reader driver");
|