mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 02:26:57 +07:00
13351cd177
The source PLL to be used by each DSI PHY should be decided by DSI manager based on dual DSI information, while the register programming to select PLL is different from one type of PHY to another. This change adds the H/W difference to PHY configuration and updates the interface between DSI manager and PHY. With this change, PLL selection can be supported on different targets. Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
626 lines
16 KiB
C
626 lines
16 KiB
C
/*
|
|
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include "dsi.h"
|
|
#include "dsi.xml.h"
|
|
|
|
#define dsi_phy_read(offset) msm_readl((offset))
|
|
#define dsi_phy_write(offset, data) msm_writel((data), (offset))
|
|
|
|
struct dsi_phy_ops {
|
|
int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
|
|
const unsigned long bit_rate, const unsigned long esc_rate);
|
|
int (*disable)(struct msm_dsi_phy *phy);
|
|
};
|
|
|
|
struct dsi_phy_cfg {
|
|
enum msm_dsi_phy_type type;
|
|
struct dsi_reg_config reg_cfg;
|
|
struct dsi_phy_ops ops;
|
|
|
|
/* Each cell {phy_id, pll_id} of the truth table indicates
|
|
* if the source PLL is on the right side of the PHY.
|
|
* Fill default H/W values in illegal cells, eg. cell {0, 1}.
|
|
*/
|
|
bool src_pll_truthtable[DSI_MAX][DSI_MAX];
|
|
};
|
|
|
|
struct dsi_dphy_timing {
|
|
u32 clk_pre;
|
|
u32 clk_post;
|
|
u32 clk_zero;
|
|
u32 clk_trail;
|
|
u32 clk_prepare;
|
|
u32 hs_exit;
|
|
u32 hs_zero;
|
|
u32 hs_prepare;
|
|
u32 hs_trail;
|
|
u32 hs_rqst;
|
|
u32 ta_go;
|
|
u32 ta_sure;
|
|
u32 ta_get;
|
|
};
|
|
|
|
struct msm_dsi_phy {
|
|
struct platform_device *pdev;
|
|
void __iomem *base;
|
|
void __iomem *reg_base;
|
|
int id;
|
|
|
|
struct clk *ahb_clk;
|
|
struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
|
|
|
|
struct dsi_dphy_timing timing;
|
|
const struct dsi_phy_cfg *cfg;
|
|
|
|
struct msm_dsi_pll *pll;
|
|
};
|
|
|
|
static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
|
|
{
|
|
struct regulator_bulk_data *s = phy->supplies;
|
|
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
|
|
struct device *dev = &phy->pdev->dev;
|
|
int num = phy->cfg->reg_cfg.num;
|
|
int i, ret;
|
|
|
|
for (i = 0; i < num; i++)
|
|
s[i].supply = regs[i].name;
|
|
|
|
ret = devm_regulator_bulk_get(&phy->pdev->dev, num, s);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: failed to init regulator, ret=%d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < num; i++) {
|
|
if ((regs[i].min_voltage >= 0) && (regs[i].max_voltage >= 0)) {
|
|
ret = regulator_set_voltage(s[i].consumer,
|
|
regs[i].min_voltage, regs[i].max_voltage);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"regulator %d set voltage failed, %d\n",
|
|
i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
|
|
{
|
|
struct regulator_bulk_data *s = phy->supplies;
|
|
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
|
|
int num = phy->cfg->reg_cfg.num;
|
|
int i;
|
|
|
|
DBG("");
|
|
for (i = num - 1; i >= 0; i--)
|
|
if (regs[i].disable_load >= 0)
|
|
regulator_set_load(s[i].consumer,
|
|
regs[i].disable_load);
|
|
|
|
regulator_bulk_disable(num, s);
|
|
}
|
|
|
|
static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
|
|
{
|
|
struct regulator_bulk_data *s = phy->supplies;
|
|
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
|
|
struct device *dev = &phy->pdev->dev;
|
|
int num = phy->cfg->reg_cfg.num;
|
|
int ret, i;
|
|
|
|
DBG("");
|
|
for (i = 0; i < num; i++) {
|
|
if (regs[i].enable_load >= 0) {
|
|
ret = regulator_set_load(s[i].consumer,
|
|
regs[i].enable_load);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"regulator %d set op mode failed, %d\n",
|
|
i, ret);
|
|
goto fail;
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = regulator_bulk_enable(num, s);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator enable failed, %d\n", ret);
|
|
goto fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
for (i--; i >= 0; i--)
|
|
regulator_set_load(s[i].consumer, regs[i].disable_load);
|
|
return ret;
|
|
}
|
|
|
|
static void dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg)
|
|
{
|
|
int phy_id = phy->id;
|
|
|
|
if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
|
|
return;
|
|
|
|
if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
|
|
dsi_phy_write(phy->base + reg, 0x01);
|
|
else
|
|
dsi_phy_write(phy->base + reg, 0x00);
|
|
}
|
|
|
|
#define S_DIV_ROUND_UP(n, d) \
|
|
(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
|
|
|
|
static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
|
|
s32 min_result, bool even)
|
|
{
|
|
s32 v;
|
|
v = (tmax - tmin) * percent;
|
|
v = S_DIV_ROUND_UP(v, 100) + tmin;
|
|
if (even && (v & 0x1))
|
|
return max_t(s32, min_result, v - 1);
|
|
else
|
|
return max_t(s32, min_result, v);
|
|
}
|
|
|
|
static void dsi_dphy_timing_calc_clk_zero(struct dsi_dphy_timing *timing,
|
|
s32 ui, s32 coeff, s32 pcnt)
|
|
{
|
|
s32 tmax, tmin, clk_z;
|
|
s32 temp;
|
|
|
|
/* reset */
|
|
temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
|
|
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
|
|
if (tmin > 255) {
|
|
tmax = 511;
|
|
clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
|
|
} else {
|
|
tmax = 255;
|
|
clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
|
|
}
|
|
|
|
/* adjust */
|
|
temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
|
|
timing->clk_zero = clk_z + 8 - temp;
|
|
}
|
|
|
|
static int dsi_dphy_timing_calc(struct dsi_dphy_timing *timing,
|
|
const unsigned long bit_rate, const unsigned long esc_rate)
|
|
{
|
|
s32 ui, lpx;
|
|
s32 tmax, tmin;
|
|
s32 pcnt0 = 10;
|
|
s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
|
|
s32 pcnt2 = 10;
|
|
s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
|
|
s32 coeff = 1000; /* Precision, should avoid overflow */
|
|
s32 temp;
|
|
|
|
if (!bit_rate || !esc_rate)
|
|
return -EINVAL;
|
|
|
|
ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
|
|
lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
|
|
|
|
tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
|
|
tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
|
|
timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
|
|
|
|
temp = lpx / ui;
|
|
if (temp & 0x1)
|
|
timing->hs_rqst = temp;
|
|
else
|
|
timing->hs_rqst = max_t(s32, 0, temp - 2);
|
|
|
|
/* Calculate clk_zero after clk_prepare and hs_rqst */
|
|
dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
|
|
|
|
temp = 105 * coeff + 12 * ui - 20 * coeff;
|
|
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
|
|
tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
|
|
timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
|
|
|
|
temp = 85 * coeff + 6 * ui;
|
|
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
|
|
temp = 40 * coeff + 4 * ui;
|
|
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
|
|
timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
|
|
|
|
tmax = 255;
|
|
temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
|
|
temp = 145 * coeff + 10 * ui - temp;
|
|
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
|
|
timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
|
|
|
|
temp = 105 * coeff + 12 * ui - 20 * coeff;
|
|
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
|
|
temp = 60 * coeff + 4 * ui;
|
|
tmin = DIV_ROUND_UP(temp, ui) - 2;
|
|
timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
|
|
|
|
tmax = 255;
|
|
tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
|
|
timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
|
|
|
|
tmax = 63;
|
|
temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
|
|
temp = 60 * coeff + 52 * ui - 24 * ui - temp;
|
|
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
|
|
timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
|
|
|
|
tmax = 63;
|
|
temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
|
|
temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
|
|
temp += 8 * ui + lpx;
|
|
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
|
|
if (tmin > tmax) {
|
|
temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false) >> 1;
|
|
timing->clk_pre = temp >> 1;
|
|
temp = (2 * tmax - tmin) * pcnt2;
|
|
} else {
|
|
timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
|
|
}
|
|
|
|
timing->ta_go = 3;
|
|
timing->ta_sure = 0;
|
|
timing->ta_get = 4;
|
|
|
|
DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
|
|
timing->clk_pre, timing->clk_post, timing->clk_zero,
|
|
timing->clk_trail, timing->clk_prepare, timing->hs_exit,
|
|
timing->hs_zero, timing->hs_prepare, timing->hs_trail,
|
|
timing->hs_rqst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
|
|
{
|
|
void __iomem *base = phy->reg_base;
|
|
|
|
if (!enable) {
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
|
|
return;
|
|
}
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
|
|
}
|
|
|
|
static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
|
|
const unsigned long bit_rate, const unsigned long esc_rate)
|
|
{
|
|
struct dsi_dphy_timing *timing = &phy->timing;
|
|
int i;
|
|
void __iomem *base = phy->base;
|
|
|
|
DBG("");
|
|
|
|
if (dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
|
|
pr_err("%s: D-PHY timing calculation failed\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
|
|
|
|
dsi_28nm_phy_regulator_ctrl(phy, true);
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
|
|
DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
|
|
DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
|
|
DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
|
|
if (timing->clk_zero & BIT(8))
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
|
|
DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
|
|
DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
|
|
DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
|
|
DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
|
|
DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
|
|
DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
|
|
DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
|
|
DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
|
|
DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
|
|
DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
|
|
}
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(0), 0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(1), 0x5);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(2), 0xa);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(3), 0xf);
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
|
|
|
|
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
|
|
|
|
dsi_phy_set_src_pll(phy, src_pll_id, REG_DSI_28nm_PHY_GLBL_TEST_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
|
|
{
|
|
dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
|
|
dsi_28nm_phy_regulator_ctrl(phy, false);
|
|
|
|
/*
|
|
* Wait for the registers writes to complete in order to
|
|
* ensure that the phy is completely disabled
|
|
*/
|
|
wmb();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
|
|
{
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(&phy->pdev->dev);
|
|
|
|
ret = clk_prepare_enable(phy->ahb_clk);
|
|
if (ret) {
|
|
pr_err("%s: can't enable ahb clk, %d\n", __func__, ret);
|
|
pm_runtime_put_sync(&phy->pdev->dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
|
|
{
|
|
clk_disable_unprepare(phy->ahb_clk);
|
|
pm_runtime_put_sync(&phy->pdev->dev);
|
|
}
|
|
|
|
static const struct dsi_phy_cfg dsi_phy_cfgs[MSM_DSI_PHY_MAX] = {
|
|
[MSM_DSI_PHY_28NM_HPM] = {
|
|
.type = MSM_DSI_PHY_28NM_HPM,
|
|
.src_pll_truthtable = { {true, true}, {false, true} },
|
|
.reg_cfg = {
|
|
.num = 1,
|
|
.regs = {
|
|
{"vddio", 1800000, 1800000, 100000, 100},
|
|
},
|
|
},
|
|
.ops = {
|
|
.enable = dsi_28nm_phy_enable,
|
|
.disable = dsi_28nm_phy_disable,
|
|
}
|
|
},
|
|
[MSM_DSI_PHY_28NM_LP] = {
|
|
.type = MSM_DSI_PHY_28NM_LP,
|
|
.src_pll_truthtable = { {true, true}, {true, true} },
|
|
.reg_cfg = {
|
|
.num = 1,
|
|
.regs = {
|
|
{"vddio", 1800000, 1800000, 100000, 100},
|
|
},
|
|
},
|
|
.ops = {
|
|
.enable = dsi_28nm_phy_enable,
|
|
.disable = dsi_28nm_phy_disable,
|
|
}
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id dsi_phy_dt_match[] = {
|
|
{ .compatible = "qcom,dsi-phy-28nm-hpm",
|
|
.data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_HPM],},
|
|
{ .compatible = "qcom,dsi-phy-28nm-lp",
|
|
.data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_LP],},
|
|
{}
|
|
};
|
|
|
|
static int dsi_phy_driver_probe(struct platform_device *pdev)
|
|
{
|
|
struct msm_dsi_phy *phy;
|
|
const struct of_device_id *match;
|
|
int ret;
|
|
|
|
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
match = of_match_node(dsi_phy_dt_match, pdev->dev.of_node);
|
|
if (!match)
|
|
return -ENODEV;
|
|
|
|
phy->cfg = match->data;
|
|
phy->pdev = pdev;
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node,
|
|
"qcom,dsi-phy-index", &phy->id);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"%s: PHY index not specified, ret=%d\n",
|
|
__func__, ret);
|
|
goto fail;
|
|
}
|
|
|
|
phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
|
|
if (IS_ERR(phy->base)) {
|
|
dev_err(&pdev->dev, "%s: failed to map phy base\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator", "DSI_PHY_REG");
|
|
if (IS_ERR(phy->reg_base)) {
|
|
dev_err(&pdev->dev,
|
|
"%s: failed to map phy regulator base\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
ret = dsi_phy_regulator_init(phy);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "%s: failed to init regulator\n", __func__);
|
|
goto fail;
|
|
}
|
|
|
|
phy->ahb_clk = devm_clk_get(&pdev->dev, "iface_clk");
|
|
if (IS_ERR(phy->ahb_clk)) {
|
|
pr_err("%s: Unable to get ahb clk\n", __func__);
|
|
ret = PTR_ERR(phy->ahb_clk);
|
|
goto fail;
|
|
}
|
|
|
|
/* PLL init will call into clk_register which requires
|
|
* register access, so we need to enable power and ahb clock.
|
|
*/
|
|
ret = dsi_phy_enable_resource(phy);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
|
|
if (!phy->pll)
|
|
dev_info(&pdev->dev,
|
|
"%s: pll init failed, need separate pll clk driver\n",
|
|
__func__);
|
|
|
|
dsi_phy_disable_resource(phy);
|
|
|
|
platform_set_drvdata(pdev, phy);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int dsi_phy_driver_remove(struct platform_device *pdev)
|
|
{
|
|
struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
|
|
|
|
if (phy && phy->pll) {
|
|
msm_dsi_pll_destroy(phy->pll);
|
|
phy->pll = NULL;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver dsi_phy_platform_driver = {
|
|
.probe = dsi_phy_driver_probe,
|
|
.remove = dsi_phy_driver_remove,
|
|
.driver = {
|
|
.name = "msm_dsi_phy",
|
|
.of_match_table = dsi_phy_dt_match,
|
|
},
|
|
};
|
|
|
|
void __init msm_dsi_phy_driver_register(void)
|
|
{
|
|
platform_driver_register(&dsi_phy_platform_driver);
|
|
}
|
|
|
|
void __exit msm_dsi_phy_driver_unregister(void)
|
|
{
|
|
platform_driver_unregister(&dsi_phy_platform_driver);
|
|
}
|
|
|
|
int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
|
|
const unsigned long bit_rate, const unsigned long esc_rate)
|
|
{
|
|
int ret;
|
|
|
|
if (!phy || !phy->cfg->ops.enable)
|
|
return -EINVAL;
|
|
|
|
ret = dsi_phy_regulator_enable(phy);
|
|
if (ret) {
|
|
dev_err(&phy->pdev->dev, "%s: regulator enable failed, %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return phy->cfg->ops.enable(phy, src_pll_id, bit_rate, esc_rate);
|
|
}
|
|
|
|
int msm_dsi_phy_disable(struct msm_dsi_phy *phy)
|
|
{
|
|
if (!phy || !phy->cfg->ops.disable)
|
|
return -EINVAL;
|
|
|
|
phy->cfg->ops.disable(phy);
|
|
dsi_phy_regulator_disable(phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
|
|
u32 *clk_pre, u32 *clk_post)
|
|
{
|
|
if (!phy)
|
|
return;
|
|
if (clk_pre)
|
|
*clk_pre = phy->timing.clk_pre;
|
|
if (clk_post)
|
|
*clk_post = phy->timing.clk_post;
|
|
}
|
|
|
|
struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
|
|
{
|
|
if (!phy)
|
|
return NULL;
|
|
|
|
return phy->pll;
|
|
}
|
|
|