mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 14:36:42 +07:00
114840c3d2
Secure-host is the general term for the capability of a device to protect itself and the subnet from malicious host software. This is achieved by: 1. Not allowing un-trusted entities to access device configuration registers, directly (through pci_cr or pci_conf) and indirectly (through MADs). 2. Hiding M_Key from untrusted entities. 3. Preventing the modification of GUID0 by un-trusted entities 4. Not allowing drivers on untrusted hosts to receive nor to transmit packets over QP0 (SMP Firewall). The secure-host capability depends on firmware handling all QP0 packets, and not passing these packets up to the driver. Any information required by the driver for proper operation (e.g., SM lid) is passed via events generated by the firmware while processing QP0 MADs. Driver support mainly requires using the MAD_DEMUX FW command at startup, where the feature is enabled/disabled through a procedure described in the Mellanox HCA tools package. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Fix error path in mlx4_setup_hca to go to err_mcg_table_free. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
262 lines
7.6 KiB
C
262 lines
7.6 KiB
C
/*
|
|
* Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
|
|
*
|
|
* This software is available to you under a choice of one of two
|
|
* licenses. You may choose to be licensed under the terms of the GNU
|
|
* General Public License (GPL) Version 2, available from the file
|
|
* COPYING in the main directory of this source tree, or the
|
|
* OpenIB.org BSD license below:
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer.
|
|
*
|
|
* - Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials
|
|
* provided with the distribution.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
#ifndef MLX4_CMD_H
|
|
#define MLX4_CMD_H
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/if_link.h>
|
|
|
|
enum {
|
|
/* initialization and general commands */
|
|
MLX4_CMD_SYS_EN = 0x1,
|
|
MLX4_CMD_SYS_DIS = 0x2,
|
|
MLX4_CMD_MAP_FA = 0xfff,
|
|
MLX4_CMD_UNMAP_FA = 0xffe,
|
|
MLX4_CMD_RUN_FW = 0xff6,
|
|
MLX4_CMD_MOD_STAT_CFG = 0x34,
|
|
MLX4_CMD_QUERY_DEV_CAP = 0x3,
|
|
MLX4_CMD_QUERY_FW = 0x4,
|
|
MLX4_CMD_ENABLE_LAM = 0xff8,
|
|
MLX4_CMD_DISABLE_LAM = 0xff7,
|
|
MLX4_CMD_QUERY_DDR = 0x5,
|
|
MLX4_CMD_QUERY_ADAPTER = 0x6,
|
|
MLX4_CMD_INIT_HCA = 0x7,
|
|
MLX4_CMD_CLOSE_HCA = 0x8,
|
|
MLX4_CMD_INIT_PORT = 0x9,
|
|
MLX4_CMD_CLOSE_PORT = 0xa,
|
|
MLX4_CMD_QUERY_HCA = 0xb,
|
|
MLX4_CMD_QUERY_PORT = 0x43,
|
|
MLX4_CMD_SENSE_PORT = 0x4d,
|
|
MLX4_CMD_HW_HEALTH_CHECK = 0x50,
|
|
MLX4_CMD_SET_PORT = 0xc,
|
|
MLX4_CMD_SET_NODE = 0x5a,
|
|
MLX4_CMD_QUERY_FUNC = 0x56,
|
|
MLX4_CMD_ACCESS_DDR = 0x2e,
|
|
MLX4_CMD_MAP_ICM = 0xffa,
|
|
MLX4_CMD_UNMAP_ICM = 0xff9,
|
|
MLX4_CMD_MAP_ICM_AUX = 0xffc,
|
|
MLX4_CMD_UNMAP_ICM_AUX = 0xffb,
|
|
MLX4_CMD_SET_ICM_SIZE = 0xffd,
|
|
/*master notify fw on finish for slave's flr*/
|
|
MLX4_CMD_INFORM_FLR_DONE = 0x5b,
|
|
MLX4_CMD_GET_OP_REQ = 0x59,
|
|
|
|
/* TPT commands */
|
|
MLX4_CMD_SW2HW_MPT = 0xd,
|
|
MLX4_CMD_QUERY_MPT = 0xe,
|
|
MLX4_CMD_HW2SW_MPT = 0xf,
|
|
MLX4_CMD_READ_MTT = 0x10,
|
|
MLX4_CMD_WRITE_MTT = 0x11,
|
|
MLX4_CMD_SYNC_TPT = 0x2f,
|
|
|
|
/* EQ commands */
|
|
MLX4_CMD_MAP_EQ = 0x12,
|
|
MLX4_CMD_SW2HW_EQ = 0x13,
|
|
MLX4_CMD_HW2SW_EQ = 0x14,
|
|
MLX4_CMD_QUERY_EQ = 0x15,
|
|
|
|
/* CQ commands */
|
|
MLX4_CMD_SW2HW_CQ = 0x16,
|
|
MLX4_CMD_HW2SW_CQ = 0x17,
|
|
MLX4_CMD_QUERY_CQ = 0x18,
|
|
MLX4_CMD_MODIFY_CQ = 0x2c,
|
|
|
|
/* SRQ commands */
|
|
MLX4_CMD_SW2HW_SRQ = 0x35,
|
|
MLX4_CMD_HW2SW_SRQ = 0x36,
|
|
MLX4_CMD_QUERY_SRQ = 0x37,
|
|
MLX4_CMD_ARM_SRQ = 0x40,
|
|
|
|
/* QP/EE commands */
|
|
MLX4_CMD_RST2INIT_QP = 0x19,
|
|
MLX4_CMD_INIT2RTR_QP = 0x1a,
|
|
MLX4_CMD_RTR2RTS_QP = 0x1b,
|
|
MLX4_CMD_RTS2RTS_QP = 0x1c,
|
|
MLX4_CMD_SQERR2RTS_QP = 0x1d,
|
|
MLX4_CMD_2ERR_QP = 0x1e,
|
|
MLX4_CMD_RTS2SQD_QP = 0x1f,
|
|
MLX4_CMD_SQD2SQD_QP = 0x38,
|
|
MLX4_CMD_SQD2RTS_QP = 0x20,
|
|
MLX4_CMD_2RST_QP = 0x21,
|
|
MLX4_CMD_QUERY_QP = 0x22,
|
|
MLX4_CMD_INIT2INIT_QP = 0x2d,
|
|
MLX4_CMD_SUSPEND_QP = 0x32,
|
|
MLX4_CMD_UNSUSPEND_QP = 0x33,
|
|
MLX4_CMD_UPDATE_QP = 0x61,
|
|
/* special QP and management commands */
|
|
MLX4_CMD_CONF_SPECIAL_QP = 0x23,
|
|
MLX4_CMD_MAD_IFC = 0x24,
|
|
MLX4_CMD_MAD_DEMUX = 0x203,
|
|
|
|
/* multicast commands */
|
|
MLX4_CMD_READ_MCG = 0x25,
|
|
MLX4_CMD_WRITE_MCG = 0x26,
|
|
MLX4_CMD_MGID_HASH = 0x27,
|
|
|
|
/* miscellaneous commands */
|
|
MLX4_CMD_DIAG_RPRT = 0x30,
|
|
MLX4_CMD_NOP = 0x31,
|
|
MLX4_CMD_CONFIG_DEV = 0x3a,
|
|
MLX4_CMD_ACCESS_MEM = 0x2e,
|
|
MLX4_CMD_SET_VEP = 0x52,
|
|
|
|
/* Ethernet specific commands */
|
|
MLX4_CMD_SET_VLAN_FLTR = 0x47,
|
|
MLX4_CMD_SET_MCAST_FLTR = 0x48,
|
|
MLX4_CMD_DUMP_ETH_STATS = 0x49,
|
|
|
|
/* Communication channel commands */
|
|
MLX4_CMD_ARM_COMM_CHANNEL = 0x57,
|
|
MLX4_CMD_GEN_EQE = 0x58,
|
|
|
|
/* virtual commands */
|
|
MLX4_CMD_ALLOC_RES = 0xf00,
|
|
MLX4_CMD_FREE_RES = 0xf01,
|
|
MLX4_CMD_MCAST_ATTACH = 0xf05,
|
|
MLX4_CMD_UCAST_ATTACH = 0xf06,
|
|
MLX4_CMD_PROMISC = 0xf08,
|
|
MLX4_CMD_QUERY_FUNC_CAP = 0xf0a,
|
|
MLX4_CMD_QP_ATTACH = 0xf0b,
|
|
|
|
/* debug commands */
|
|
MLX4_CMD_QUERY_DEBUG_MSG = 0x2a,
|
|
MLX4_CMD_SET_DEBUG_MSG = 0x2b,
|
|
|
|
/* statistics commands */
|
|
MLX4_CMD_QUERY_IF_STAT = 0X54,
|
|
MLX4_CMD_SET_IF_STAT = 0X55,
|
|
|
|
/* register/delete flow steering network rules */
|
|
MLX4_QP_FLOW_STEERING_ATTACH = 0x65,
|
|
MLX4_QP_FLOW_STEERING_DETACH = 0x66,
|
|
MLX4_FLOW_STEERING_IB_UC_QP_RANGE = 0x64,
|
|
};
|
|
|
|
enum {
|
|
MLX4_CMD_TIME_CLASS_A = 10000,
|
|
MLX4_CMD_TIME_CLASS_B = 10000,
|
|
MLX4_CMD_TIME_CLASS_C = 10000,
|
|
};
|
|
|
|
enum {
|
|
MLX4_MAILBOX_SIZE = 4096,
|
|
MLX4_ACCESS_MEM_ALIGN = 256,
|
|
};
|
|
|
|
enum {
|
|
/* set port opcode modifiers */
|
|
MLX4_SET_PORT_GENERAL = 0x0,
|
|
MLX4_SET_PORT_RQP_CALC = 0x1,
|
|
MLX4_SET_PORT_MAC_TABLE = 0x2,
|
|
MLX4_SET_PORT_VLAN_TABLE = 0x3,
|
|
MLX4_SET_PORT_PRIO_MAP = 0x4,
|
|
MLX4_SET_PORT_GID_TABLE = 0x5,
|
|
MLX4_SET_PORT_PRIO2TC = 0x8,
|
|
MLX4_SET_PORT_SCHEDULER = 0x9,
|
|
MLX4_SET_PORT_VXLAN = 0xB
|
|
};
|
|
|
|
enum {
|
|
MLX4_CMD_MAD_DEMUX_CONFIG = 0,
|
|
MLX4_CMD_MAD_DEMUX_QUERY_STATE = 1,
|
|
MLX4_CMD_MAD_DEMUX_QUERY_RESTR = 2, /* Query mad demux restrictions */
|
|
};
|
|
|
|
enum {
|
|
MLX4_CMD_WRAPPED,
|
|
MLX4_CMD_NATIVE
|
|
};
|
|
|
|
struct mlx4_dev;
|
|
|
|
struct mlx4_cmd_mailbox {
|
|
void *buf;
|
|
dma_addr_t dma;
|
|
};
|
|
|
|
int __mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
|
|
int out_is_imm, u32 in_modifier, u8 op_modifier,
|
|
u16 op, unsigned long timeout, int native);
|
|
|
|
/* Invoke a command with no output parameter */
|
|
static inline int mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u32 in_modifier,
|
|
u8 op_modifier, u16 op, unsigned long timeout,
|
|
int native)
|
|
{
|
|
return __mlx4_cmd(dev, in_param, NULL, 0, in_modifier,
|
|
op_modifier, op, timeout, native);
|
|
}
|
|
|
|
/* Invoke a command with an output mailbox */
|
|
static inline int mlx4_cmd_box(struct mlx4_dev *dev, u64 in_param, u64 out_param,
|
|
u32 in_modifier, u8 op_modifier, u16 op,
|
|
unsigned long timeout, int native)
|
|
{
|
|
return __mlx4_cmd(dev, in_param, &out_param, 0, in_modifier,
|
|
op_modifier, op, timeout, native);
|
|
}
|
|
|
|
/*
|
|
* Invoke a command with an immediate output parameter (and copy the
|
|
* output into the caller's out_param pointer after the command
|
|
* executes).
|
|
*/
|
|
static inline int mlx4_cmd_imm(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
|
|
u32 in_modifier, u8 op_modifier, u16 op,
|
|
unsigned long timeout, int native)
|
|
{
|
|
return __mlx4_cmd(dev, in_param, out_param, 1, in_modifier,
|
|
op_modifier, op, timeout, native);
|
|
}
|
|
|
|
struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev);
|
|
void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox);
|
|
|
|
u32 mlx4_comm_get_version(void);
|
|
int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac);
|
|
int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos);
|
|
int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting);
|
|
int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_info *ivf);
|
|
int mlx4_set_vf_link_state(struct mlx4_dev *dev, int port, int vf, int link_state);
|
|
/*
|
|
* mlx4_get_slave_default_vlan -
|
|
* return true if VST ( default vlan)
|
|
* if VST, will return vlan & qos (if not NULL)
|
|
*/
|
|
bool mlx4_get_slave_default_vlan(struct mlx4_dev *dev, int port, int slave,
|
|
u16 *vlan, u8 *qos);
|
|
|
|
#define MLX4_COMM_GET_IF_REV(cmd_chan_ver) (u8)((cmd_chan_ver) >> 8)
|
|
|
|
#endif /* MLX4_CMD_H */
|